Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reductive Effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Open and Closed Loop Stability of Hingeless Rotor Helicopter Air and Ground Resonance

The air and ground resonance instabilities of hingeless rotor helicopters are examined on a relatively broad parametric basis including the effects of blade tuning, virtual hinge locations, and blade hysteresis damping, as well as size and scale effects in the gross weight range from 5,000 to 48,000 pounds. A special case of a 72,000 pound helicopter air resonance instability is also included. The study shows that nominal to moderate and readily achieved levels of blade inertial hysteresis damping in conjunction with a variety of tuning and/or feedback conditions are highly effective in dealing with these instabilities. Tip weights and reductions in pre-coning angles are also shown to be effective means for improving the air resonance instability.

Young, M. I.↗

Microgravity Science Glovebox Investigations SUBSA

Solidification Using a Baffle in Sealed Ampoules (SUBSA) is a Microgravity Science Glovebox Investigation manifested for the UF2 flight, on the U.S. Orbiter 111, to the International Space Station (ISS). SUBSA complements the "parent" flight investigation CG13 (Space-and Groundbased Crystal Growth Using a Baffle). During directional solidification, the disk-shaped baffle acts as a partition, creating a small melt zone at the solid-liquid interface. As a result, the level of buoyancy-driven convection at the interface is significantly reduced. In space, the baffle will reduce convection driven by residual micro acceleration. The baffle reduces the Rayleigh number (Ra) of the melt by a factor of 103. The combined effect of the baffle and microgravity will yield a reduction in Ra by a factor of 107 to 109 approaching effectively the acceleration conditions in "nanogravity". The results of ground based tests and numerical modeling will be presented. The furnace for directional solidification (flight hardware and the ground unit) was developed by Tec-Masters Inc. The flight ampoules were produced jointly at Rensselaer, Tec-Masters Inc. and Crystallod Inc.

Ostrogorsky, A.↗

Subjective loudness response to simulated sonic booms

A series of laboratory studies were conducted at LaRC to: (1) quantify the effects of sonic boom signature shaping on subjective loudness; (2) evaluate candidate loudness metrics; (3) quantify the effects of signature asymmetry on loudness; and (4) document sonic boom acceptability within the laboratory. A total of 212 test subjects evaluated a wide range of signatures using the NASA Langley Research Center's sonic boom simulator. Results indicated that signature shaping via front-shock minimization was particularly effective in reducing subjective loudness without requiring reductions in peak overpressure. Metric evaluations showed that A-weighted sound exposure level, Perceived Level (Stevens Mark 7), and Zwicker's Loudness level were effective descriptors of the loudness of symmetrical shaped signatures. The asymmetrical signatures were generally rated as being quieter than symmetrical signatures of equal calculated metric level. The magnitude of the loudness reductions were observed to increase as the degree of asymmetry increased and to be greatest when the rear half of the signature was loudest. This effect was not accounted for by the loudness metrics. Sonic boom acceptability criteria were determined within the laboratory. These agreed well with results previously obtained in more realistic situations.

Leatherwood, Jack D.↗

Thermogravimetric study of the reduction of oxides of nickel and chromium

The effectiveness of hydrogen, carbon and hydrogen-carbon in reducing NiO, Cr2O3, mixed NiO-Cr2O3 and oxidized Ni-20Cr was evaluated by thermogravimetry. NiO was effectively reduced by all three atmospheres, Cr2O3 only by hydrogen-carbon, NiO-Cr2O3 by hydrogen and hydrogen-carbon and oxidized Ni-20Cr by hydrogen, hydrogen-carbon and partially by carbon alone. The results indicate that nickel and carbon promote the reduction of Cr2O3.

Herbell, T. P.↗

Research on wood bending in a macrosonic field

Woodworking often requires the wood to be bent into different shapes. In view of the fact that macrosonic waves compress and expand the medium through which they are being propagated we assumed that wood subjected to the action of these waves during the bending process would have enhanced plasticity as a result of the loosening-up that takes place in it, as well as of the reduction in effort. To this effect, the bending of wood plasticized in a macrosonic field was studied. This bending took place under good conditions, and structural analyses conducted with the aid of an electron microscope proved initial premises to be corrent. Applied on an industrial scale, this procedure would contribute to improving the technology of wood bending as well as to eliminating factory spoilage.

Filipovici, J.↗

Payload design requirements analysis (study 2.2). Volume 1: Executive summary

Research was conducted to provide data on ways to effectively realize the projected cost reductions for payloads to be developed and operated in the shuttle era. Prior studies have indicated that the Shuttle concept of satellite operations will lead to a large reduction in overall payload cost. This study provides the data and insight into the methods of accomplishing these economic benefits. The study examined only payloads that will be launched on the shuttle/tug/sortie lab combinations. These payloads are of four types: (1) expendable; (2) ground refurbishable; (3) on-orbit maintainable; and (4) sortie. The expendable payloads are intended specifically for the shuttle/tug and not for expendable launch vehicles. Economic comparisons were made only between these four types of shuttle payloads and not between these payloads and current expendable launch vehicle payloads.

Shiokari, T.↗

Motor activity of astronauts in unsupported state

The performance quality of movements away and approaches to an airlock by astronauts was tested during parabolic flights for weightlessness simulation. Coordination of movement, orientation and performance capacity of the astronauts were not singificantly disrupted. Observed physiological shifts are characterized by an increase in pulse and respiration rate and an increase in arterial pressure under g-forces, a gradual decrease in these indices during repeated stays in weightlessness or during the prolonged effect of it, by a reduction of the length of postrotational nystagmus and counterrotation illusions under weightless conditions.

Kasyan, I. I.↗

Adjustable gas-flow restrictor

Flow restrictor uses long narrow helical path between mating threads to effect simultaneous pressure and temperature reduction of flowing gases within short axial distance. Pressure drop can be adjusted simply by screwing or unscrewing threaded parts to increase or decrease flow path.

Brown, J. J.↗

An exploratory study of a finite difference method for calculating unsteady transonic potential flow

A method for calculating transonic flow over steady and oscillating airfoils was developed by Isogai. The full potential equation is solved with a semi-implicit, time-marching, finite difference technique. Steady flow solutions are obtained from time asymptotic solutions for a steady airfoil. Corresponding oscillatory solutions are obtained by initiating an oscillation and marching in time for several cycles until a converged periodic solution is achieved. The method is described in general terms and results for the case of an airfoil with an oscillating flap are presented for Mach numbers 0.500 and 0.875. Although satisfactory results are obtained for some reduced frequencies, it is found that the numerical technique generates spurious oscillations in the indicial response functions and in the variation of the aerodynamic coefficients with reduced frequency. These oscillations are examined with a dynamic data reduction method to evaluate their effects and trends with reduced frequency and Mach number. Further development of the numerical method is needed to eliminate these oscillations.

Bennett, R. M.↗

Upper atmosphere modifications due to chronic discharges of water vapor from space launch vehicle exhausts

The influences of transport, photodissociation, and frequency of injection on the global redistribution of water deposited in the earth's upper atmosphere by repeated launches of large rockets are investigated. Measurable environmental effects of the injected water are found to occur when the mesospheric water vapor mixing ratio exceeds 100 ppmv, which occurs over areas of order 20,000 sq km in connection with possible future Satellite Power System activities. These effects include (1) a 50% reduction in D-region ionization due to screening of L alpha radiation by water; (2) a 50% reduction of D-region ionization as a result of converting NO(+) to water cluster ions which possess more rapid recombination rates; (3) a doubling of OH concentrations below 100 km; and (4) a global doubling of nighttime E-region ionization due to L alpha and L beta radiations geocoronally scattered by atomic hydrogen released by photolysis of H2O. Mixing ratios of 1,000 ppmv necessary for the maintenance of clouds at the mesopause are reached only over areas of order 200 sq km.

Forbes, J. M.↗

Measuring the large-scale anisotropy in the microwave background radiation

Measurements of large-scale anisotropy in the 2.7 K microwave background radiation are reaching a sensitivity of Delta T/T = 0.0001 in the amplitudes of low-order spherical harmonics. At this level, interesting conditions and processes in the early universe can be studied. However, the measurements are difficult and very susceptible to systematic errors. The microwave instruments and techniques are discussed with the emphasis on the reduction and evaluation of spurious effects. The subtraction of foreground radiation, mainly from diffuse Galactic sources, is a major problem that already limits the accuracy of measurements near 1 cm wavelength. Current results for the dipole and quadrupole moments are compared and discussed.

Wilkinson, D. T.↗

Comparison of viscous-shock-layer heating analysis with Shuttle flight data in slip flow regime

Comparison of STS-2 Shuttle flight heating data along the windward centerline has been made with two-dimensional nonequilibrium viscous shock-layer solutions obtained with shock and wall-slip conditions at an altitude range of 90 to 110 km. The shock slip condition used is the modified Rankine-Hugoniot relations of Cheng as used by Davis, and the wall-slip conditions are based on the first order consideration derived from kinetic theory as given by Scott and Hendricks. The results indicate that the calculated heating distributions with slip boundary conditions agree better with the flight data than those without slip conditions. The agreement improves when the accommodation coefficient or freestream density is decreased to one-half, suggesting the possibility of less than full accommodation for the tile surface and (or) an overestimate of freestream density using the Jacchia-Roberts model. Heating reduction due to the slip effect becomes very pronounced as the flow becomes more rarefied, and the effect is more significant for the stagnation region than the aft region of the vehicle.

Shinn, J. L.↗

Elastic interaction of a crack with a microcrack array. I - Formulation of the problem and general form of the solution. II - Elastic solution for two crack configurations (piecewise constant and linear approximations)

The elastic interactions of a two-dimensional configuration consisting of a crack with an array of microcracks located near the tip are studied. The general form of the solution is based on the potential representations and approximations of tractions on the microcracks by polynomials. In the second part, the technique is applied to two simple two-dimensional configurations involving one and two microcracks. The problems of stress shielding and stress amplification (the reduction or increase of the effective stress intensity factor due to the presence of microcracks) are discussed, and the refinements introduced by higher order polynomial approximations are illustrated.

Chudnovsky, A.↗

Fuel-rich catalytic combustion of Jet-A fuel-equivalence ratios 5.0 to 8.0

Fuel-rich catalytic combustion (E.R. greater than 5.0) is a unique technique for preheating a hydrocarbon fuel to temperatures much higher than those obtained by conventional heat exchangers. In addition to producing very reactive molecules, the process upgrades the structure of the fuel by the formation of hydrogen and smaller hydrocarbons and produces a cleaner burning fuel by removing some of the fuel carbon from the soot formation chain. With fuel-rich catalytic combustion as the first stage of a two stage combustion system, enhanced fuel properties can be utilized by both high speed engines, where time for ignition and complete combustion is limited, and engines where emission of thermal NO sub x is critical. Two-stage combustion (rich-lean) has been shown to be effective for NO sub x reduction in stationary burners where residence times are long enough to burn-up the soot formed in the first stage. Such residence times are not available in aircraft engines. Thus, the soot-free nature of the present process is critical for high speed engines. The successful application of fuel-rich catalytic combustion to Jet-A, a multicomponent fuel used in gas turbine combustors, is discusssed.

Brabbs, Theodore A.↗