Search NASA⌕ Search

SEARCH · Search NASA

Results for “Robust stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

First-principles study of quantum size effects in ultrathin Pb-Bi metal alloy films

Using first-principles calculations within density-functional theory (DFT), we investigate the effect of Bi doping in ultrathin Pb(111) films on tuning the quantum size effects (QSEs) of random metal alloy films. Our results show that the QSE of Pb films, as manifested by the oscillatory surface energy, work function, interlayer spacing, and stability with film thickness, are robust against the introduction of random scattering centers doped in the films. Specifically, the stability and the work function of the ultrathin random-alloy films exhibit obvious quantum oscillations up to {approx}20% Bi doping. The periodicity of the beating pattern of QSE oscillations can be tuned via the concentration of the doped Bi atoms through changing the Fermi wave vector. For Pb{sub 0.89}Bi{sub 0.11} alloy films, the role of the substrates of Si(111) and Ge(111) is also studied and the results are consistent with our recent experimental studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spontaneous formation of robust two-dimensional perovskite phases

The two-dimensional on three-dimensional (2D/3D) perovskite bilayer heterostructure can improve the stability and performance of perovskite solar cells. We show that the 2D/3D perovskite stack in a device evolves dynamically during its end-of-life decomposition. Initially phase-pure 2D interlayers can evolve differently, resulting in different device stabilities. We show that a robust 2D interlayer can be formed using mixed solvents to regulate its crystallinity and phase purity. The resulting 2D/3D devices achieved 25.9% efficiency and had good durability, retaining 91% of their initial performance after 1074 hours at 85°C using maximum power point tracking.

14 SOLAR ENERGY↗

Performance measurement of emerging 3- and 4-terminal tandem solar cells

Tandem solar cells are not limited to the conventional two-terminal (2-T) configuration. Multi-terminal designs like three-terminal (3-T) and four-terminal (4-T) devices have gained increasing attention in the PV community due to their relaxed current-matching requirement between subcells and their potential for enhanced energy yield. However, reliable and standardized methods for evaluating the performance of multi-terminal tandems remain underdeveloped. This work addresses this gap by providing comprehensive measurement guidelines tailored to these advanced configurations. We examine key coupling mechanisms between subcells, including the shared electrical load in 3-T devices and optical luminescent coupling in both 3-T and 4-T devices, to enable accurate and consistent performance evaluation. Furthermore, we propose two stabilized measurement methods for emerging 3-T tandem cells incorporating perovskite subcells: (1) a two-dimensional maximum-power-point tracking (MPPT) approach that continuously tracks both subcells' maximum power points (P MAX ) until convergence to stabilized outputs, and (2) a hybrid approach that combines MPPT for one subcell with stabilized current recording under fixed voltage biases near the P MAX of the other, allowing robust extraction of the overall stabilized P MAX (termed “MPPT + asymptotic P MA X scan” method). These methods directly address the dynamic current responses inherent to perovskite-containing tandems, providing a foundation for meaningful and reproducible performance comparisons.

14 SOLAR ENERGY↗

Performance of Cassini Reaction Wheel Friction Compensation Scheme During Spin Rate Zero-Crossing and Drag Spikes

Cassini uses reaction wheels to achieve the spacecraft pointing stability that is needed during imaging operations of several science instruments. The Cassini flight software makes inflight estimates of reaction wheel bearing drag torque and the reaction wheel controller uses these estimates to achieve a high level of spacecraft pointing stability. However, the Cassini drag torque estimator was designed to accurately track the bearing drag torque only in the steady state. When the physical drag torque changes abruptly (for example, during a reaction wheel spin rate reversal or when wheel bearings experienced drag spikes), the drag estimator will not be able to track the physical drag closely. This will lead to a degradation in the spacecraft pointing stability performance. For Cassini, this was not a problem because of the significant performance margin in pointing stability. However, for missions that have very challenging pointing stability requirements and that must perform well in the presence of frequent wheel rate reversals, alternative drag-compensating control schemes must be considered. To this end, alternative drag torque compensating control schemes (such as the adaptive model reference control scheme) are briefly reviewed in this paper. Selected design features used in these friction compensation schemes may be incorporated in reaction wheel controller design to improve the robustness of spacecraft pointing stability performance with regard to a wide range of reaction wheel drag torque anomalous behavior.

Lee, Allan Y↗

The Apollo Capsule Optimization for Improved Stability and Computational/Experimental Data Comparisons

Numerical optimization was employed on the Apollo Command Module to modify its external shape. The Apollo Command Module (CM) that was used on all NASA human space flights during the Apollo Space Program is stable and trimmed in an apex forward (alpha of approximately 40 to 80 degrees) position. This poses a safety risk if the CM separates from the launch tower during abort. Optimization was employed on the Apollo CM to remedy the undesirable stability characteristics of the configuration. Geometric shape changes were limited to axisymmetric modifications that altered the radius of the apex (R(sub A)), base radius (R(sub O)), corner radius (R(sub C)), and the cone half angle (theta), while the maximum diameter of the CM was held constant. The results of multipoint optimization on the CM indicated that the cross-range performance can be improved while maintaining robust apex-aft stability with a single trim point. Navier-Stokes computations were performed on the baseline and optimized configurations and confirmed the Euler-based optimization results. Euler Analysis of ten alternative CM vehicles with different values of the above four parameters are compared with the published experimental results of numerous wind tunnel tests during the late 1960's. These comparisons cover a wide Mach number range and a full 180-degree pitch range and show that the Euler methods are capable of fairly accurate force and moment computations and can separate the vehicle characteristics of these ten alternative configurations.

Cliff, Susan E.↗

Assessing the numerical stability of physics models to equilibrium variation through database comparisons on DIII-D

High fidelity kinetic equilibria are crucial for tokamak modeling and analysis. Manual workflows for constructing kinetic equilibria are time consuming and subject to user error, motivating development of automated equilibrium reconstruction tools to provide accurate and consistent reconstructions for downstream physics analysis. These automated tools also provide access to kinetic equilibria at large database scales, which enables the quantification of general uncertainties arising from equilibrium reconstruction techniques. In this paper, we compare a large database of DIII-D kinetic equilibria generated manually by physics experts to equilibria from automated kinetic reconstruction tools, assessing the impact of reconstruction method on equilibrium parameters and resulting magnetohydrodynamic stability calculations. We find agreement among scalar parameters, whereas profile quantities, such as the bootstrap current, show larger disagreements. We analyze ideal kink and classical tearing stability with DCON and STRIDE respectively, finding that the kink stability calculation is generally more robust than the tearing index Δ' calculation. We find that in 90% of cases, both kink stability classifications are unchanged between the manual expert and automated kinetic equilibria.

CAKE↗

Macroscale Fabrication of Lightweight and Strong Porous Carbon Foams through Template-Coating Pair Design

Manufacturing of low-density-high-strength carbon foams can benefit the construction, transportation, and packaging industries. One successful route to lightweight and mechanically strong carbon foams involves pyrolysis of polymeric architectures, which is inevitably accompanied by drastic volumetric shrinkage (usually >98%). As such, a challenge of these materials lies in maintaining bulk dimensions of building struts that span orders of magnitude difference in length scale from centimeters to nanometers. Here, this work demonstrates fabrication of macroscale low-density-high-strength carbon foams that feature exceptional dimensional stability through pyrolysis of robust template-coating pairs. The template serves as the architectural blueprint and contains strength-imparting properties (e.g., high node density and small strut dimensions); it is composed of a low char-yielding porous polystyrene backbone with a high carbonization-onset temperature. The coating serves to imprint and transcribe the template architecture into pyrolytic carbon; it is composed of a high char-yielding conjugated polymer with a relatively low carbonization-onset temperature. The designed carbonization mismatch enables structural inheritance, while the decomposition mismatch affords hollow struts, minimizing density. The carbons synthesized through this new framework exhibit remarkable dimensional stability (≈80% dimension retention; ≈50% volume retention) and some of the highest specific strengths (≈0.13 GPa g -1 cm 3 ) among reported carbon foams derived from porous polymer templates.

36 MATERIALS SCIENCE↗

Finite-temperature stability of a trapped dipolar Bose gas

We calculate the stability diagram for a trapped normal Bose gas with dipole-dipole interactions. Our study characterizes the roles of trap geometry, temperature, and short-range interactions on the stability. We predict a robust double instability feature in oblate trapping geometries arising from the interplay of thermal gas saturation and the anisotropy of the interaction. Our results are relevant to current experiments with polar molecules and will be useful in developing strategies to obtain a polar molecule Bose-Einstein condensate.

74 ATOMIC AND MOLECULAR PHYSICS↗

Near-cryogenic direct air capture using adsorbents

Direct air capture (DAC) of CO 2 is a key component in the portfolio of negative emissions technologies for mitigating global warming. However, even with the most potent amine sorbents, large-scale DAC deployment remains limited by high energy and capital costs. Recently, adsorbents relying on weak interactions with CO 2 have emerged as a potential alternative, thanks to their rapid adsorption kinetics and superior long-term stability, particularly under sub-ambient conditions (∼253 K). Despite these advantages, their use is hindered by the need for a water-removal process, location-specific constraints, and insufficient working capacity even in cold climates. In this study, we hypothesized that further reducing the adsorption temperature to a near-cryogenic range (160–220 K) could enable cost-effective DAC by utilizing the full potential of physisorbents. We primarily consider integrating DAC with a relatively untapped source of cold energy—liquified natural gas (LNG) regasification—to perform near-cryogenic DAC. From large-scale molecular simulations, Zeolite 13X and CALF-20 were identified as promising candidates. These materials were subsequently examined through experiments, including breakthrough analyses at 195 K. Their high CO 2 sorption capacity (4.5–5.5 mmol g −1 ), combined with a low desorption enthalpy and robust long-term stability, led to a threefold reduction in the levelized cost of capture (down to 68.2 USD per tonne CO 2 ). Estimates of the global LNG regasification resource suggest that LNG–DAC coupling could potentially enable the capture of 103–142 megatonnes of CO 2 annually as of 2050.

Kim, Seo-Yul [Georgia Institute of Technology, Atl↗

Stability of Ensemble Models Predicts Productivity of Enzymatic Systems

Stability in a metabolic system may not be obtained if incorrect amounts of enzymes are used. Without stability, some metabolites may accumulate or deplete leading to the irreversible loss of the desired operating point. Even if initial enzyme amounts achieve a stable steady state, changes in enzyme amount due to stochastic variations or environmental changes may move the system to the unstable region and lose the steady-state or quasi-steady-state flux. This situation is distinct from the phenomenon characterized by typical sensitivity analysis, which focuses on the smooth change before loss of stability. Here we show that metabolic networks differ significantly in their intrinsic ability to attain stability due to the network structure and kinetic forms, and that after achieving stability, some enzymes are prone to cause instability upon changes in enzyme amounts. We use Ensemble Modelling for Robustness Analysis (EMRA) to analyze stability in four cell-free enzymatic systems when enzyme amounts are changed. Loss of stability in continuous systems can lead to lower production even when the system is tested experimentally in batch experiments. The predictions of instability by EMRA are supported by the lower productivity in batch experimental tests. Finally, the EMRA method incorporates properties of network structure, including stoichiometry and kinetic form, but does not require specific parameter values of the enzymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facilitated Ion Transport in Smectic Ordered Ionic Liquid Crystals

We investigated a novel ionic mixture of an imidazolium-based room temperature IL containing ethylene oxide functionalized phosphite anion and a lithium salt that self-assembles into a smectic-ordered IL crystal. The two key features in this work are the unique origin of the smectic order of the ionic mixtures and the facilitated ion transport behavior in the smectic ordered IL crystal. In fact, the IL crystals are self-assembled through Coulombic interactions between ion species, not through the hydrophilic-phobic interactions between charged ion heads and hydrophobic long alkyl pendants or the steric interaction between mesogenic moieties. Furthermore, the smectic order in the IL crystal ionogel facilitates exceptional and remarkable ionic transport. Large ionic conductivity, viscoelastic robustness, and additional electrochemical stability of the IL crystal ionogels provide promising opportunities for future electrochemical applications.

Environmental Molecular Sciences Laboratory↗

Mechanical Actuation via Homeomorphic Transformations of Topological Solitons within Polymer Coatings

Abstract Topological solitons are currently under investigation for their exotic properties, especially in nonlinear physics, optics, and material sciences. However, challenges of robust generation and limited stability over time have hindered their practical uses. To address this issue, an approach is developed to form structured arrays of solitons in films of polymerizable liquid crystals. Their complex molecular architecture is preserved by in situ photopolymerization forming a stable liquid crystal network. Most excitingly, their properties are advanced to include responsiveness functions. When thermally actuated, these topological solitons mediate the reconfiguration of surface topographies. Complex shape changes occur depending on the intrinsic complex spatial distribution of the director, which may even lead to full shape inversion and topographical changes as high as ≈40% of the initial thickness. Conversely, the shape changes provide information on the initial director profile, which is consistent with the mathematical model. The soliton‐containing polymer coatings are applicable in multiple domains, ranging from tunable optics to haptics, and from shape‐coupled sensing systems to temperature‐coupled heat management.

36 MATERIALS SCIENCE↗

Single-top-quark production in the t-channel at NNLO

We present a calculation of t-channel single-top-quark production and decay in the five-flavor scheme at NNLO. Our results resolve a disagreement between two previous calculations of this process that found a difference in the inclusive cross section at the level of the NNLO coefficient itself. We compare in detail with the previous calculations at the inclusive, differential and fiducial level including b-quark tagging at a fixed scale μ = m t . In addition, we advocate the use of double deep inelastic scattering (DDIS) scales ( μ 2 = Q 2 for the light-quark line and μ 2 = Q 2 + m t 2 for the heavy-quark line) that maximize perturbative stability and allow for robust scale uncertainties. All NNLO and NLOⓍNLO contributions for production and decay are included in the on-shell and vertex-function approximation. We present fiducial and differential results for a variety of observables used in Standard Model and Beyond Standard Model analyses, and find an important difference between the NLO and NNLO predictions of exclusive t + n-jet cross sections. Overall we find that NNLO corrections are crucial for a precise identification of the t-channel process.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Kinetic versus Thermodynamic Stability of LLZO in Contact with Lithium Metal

Li 7 La 3 Zr 2 O 12 (LLZO) garnet-based oxides are a promising class of solid electrolytes used as the separator in all-solid-state batteries (ASSBs). While LLZO is considered to have a wide electrochemical stability window, its intrinsic stability in contact with lithium metal is not sufficiently well understood, and there is still a debate on the key question of whether LLZO does or does not form passivation layers before and during cycling. Utilizing both in situ and operando X-ray photoelectron spectroscopy techniques, in this work we reveal the presence of a kinetic barrier to the reduction of LLZO by Li metal, with the extent of oxygen-deficient interphase (ODI) formation depending sensitively on the energetics of Li metal arriving at the Li vertical bar LLZO interface. Despite the clear presence of a kinetic barrier to reduction, the electrochemical response of the Li vertical bar LLZO interface is unchanged by the presence of the ODI, indicating that ODI formation during electrochemical cycling does not hinder charge transfer across the Li vertical bar LLZO interface. Overall, these results reveal that the reactivity of LLZO with Li metal depends not only on the material properties of the adjoining phases (i.e., surface purity and active contact) and their resulting thermodynamic stability but also on the energy input at the interface and the resulting reaction kinetics. Furthermore, the presence of a kinetic barrier to reduction highlights the additional complexities governing the reactivity of solid-state interfaces in ASSBs and underscores the importance of operando characterization of interfacial stability to design more robust, high-performance protection strategies for solid electrolytes in contact with reactive electrodes.

25 ENERGY STORAGE↗

Interplay between Local Moment and Itinerant Magnetism in the Layered Metallic Antiferromagnet TaFe 1.14 Te 3

Two-dimensional antiferromagnets have garnered considerable interest for the next generation of functional spintronics. However, many bulk materials from which two-dimensional antiferromagnets are isolated are limited by their air sensitivity, low ordering temperatures, and insulating transport properties. TaFe 1+y Te 3 aims to address these challenges with increased air stability, metallic transport, and robust antiferromagnetism. Here, we synthesize TaFe 1+y Te 3 (y = 0.14), identify its structural, magnetic, and electronic properties, and elucidate the relationships between them. Axial-dependent high-field magnetization measurements on TaFe 1.14 Te 3 reveal saturation magnetic fields ranging between 27-30 T with saturation magnetic moments of 2.05- 2.12 μ B . Magnetotransport measurements confirm TaFe 1.14 Te 3 is metallic with strong coupling between magnetic order and electronic transport. Angle-resolved photoemission spectroscopy measurements across the magnetic transition uncover a complex interplay between itinerant electrons and local magnetic moments that drives the magnetic transition. In conclusion, we demonstrate the ability to isolate few-layer sheets of TaFe 1.14 Te 3 , establishing TaFe 1.14 Te 3 as a potential platform for two-dimensional spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

From Structure to Function: Zn/Mn-Modified Maghemite as an Advanced Nanoplatform for Magnetic Hyperthermia and Radionuclide Therapy

The development of nanoplatforms capable of efficient heat generation and stable radionuclide delivery is essential for effective bimodal cancer therapy. Here, in this study, binary (Fe–M) and ternary (Fe–M–M′) metal oxide nanoparticles were synthesized via a polyol method optimized to produce flower-like γ-Fe 2 O 3 (maghemite) structures, with M and M′ representing Zn and/or Mn. Comprehensive structural and magnetic characterization was conducted to explain the relationship between composition, defect structure, and hyperthermic performance. The analyses revealed that cation substitution induced an Fe-site vacancy, primarily at octahedral positions, leading to local structural distortions, as confirmed by powder X-ray diffraction and pair distribution function analysis. The optimized composition, with Zn/Mn/Fe = 0.040:0.182:1, exhibited the highest concentration of vacancies and structural disorder. These vacancies altered the bonding environment, enhancing magnetic interactions at tetrahedral sites while weakening those at the octahedral positions. The resulting multicore nanoflowers (20–63 nm; core size 13–18 nm) displayed strong heating performance, with intrinsic loss power ranging from 0.34 to 5.77 nHm 2 kg –1 . The optimized sample achieved a temperature increase of 30 °C within 2 min and a specific absorption rate of 369 W g –1 . This composition was further coated with citrate (CA) and successfully radiolabeled with 177 Lu, achieving a radiolabeling yield of 92.7% and excellent stability, thus forming a robust nanoplatform for combined magnetic hyperthermia and radionuclide therapy. Biological evaluation of the optimized S5 composition revealed selective cytotoxicity toward HeLa and LS174 cells, while toxicity was significantly lower to A549, A375, and normal MRC-5 cells. Citrate coating of S5 nanoparticles (S5@CA) drastically reduced their cytotoxicity across all tested cell lines (IC 50 > 200 μg mL –1 ), confirming their enhanced biocompatibility for therapeutic applications. In HeLa cells subjected to magnetic hyperthermia, the viability decreased to approximately 84% after 30 min and 61% after 60 min of treatment, demonstrating the sustained hyperthermic effect at a controlled working temperature of 48 °C. These results underscore the effectiveness of cation substitution and vacancy engineering in tailoring the functional properties of maghemite-based nanomaterials for advanced multimodal cancer therapies.

36 MATERIALS SCIENCE↗