Search NASA⌕ Search

SEARCH · Search NASA

Results for “SIZE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Probe measurements and numerical model predictions of evolving size distributions in premixed flames

Particle size distributions (PSDs), measured with a dilution probe and a Differential Mobility Analyzer (DMA), and numerical predictions of these PSDs, based on a model that includes only coagulation or alternatively inception and coagulation, are compared to investigate particle growth processes and possible sampling artifacts in the post-flame region of a C/O = 0.65 premixed laminar ethylene-air flame. Inputs to the numerical model are the PSD measured early in the flame (the initial condition for the aerosol population) and the temperature profile measured along the flame's axial centerline. The measured PSDs are initially unimodal, with a modal mobility diameter of 2.2 nm, and become bimodal later in the post-flame region. The smaller mode is best predicted with a size-dependent coagulation model, which allows some fraction of the smallest particles to escape collisions without resulting in coalescence or coagulation through the size-dependent coagulation efficiency ({gamma}{sub SD}). Instead, when {gamma} = 1 and the coagulation rate is equal to the collision rate for all particles regardless of their size, the coagulation model significantly under predicts the number concentration of both modes and over predicts the size of the largest particles in the distribution compared to the measured size distributions at various heights above the burner. The coagulation ({gamma}{sub SD}) model alone is unable to reproduce well the larger particle mode (mode II). Combining persistent nucleation with size-dependent coagulation brings the predicted PSDs to within experimental error of the measurements, which seems to suggest that surface growth processes are relatively insignificant in these flames. Shifting measured PSDs a few mm closer to the burner surface, generally adopted to correct for probe perturbations, does not produce a better matching between the experimental and the numerical results. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural evolution in crystalline MoO{sub 3} nanoparticles with tunable size

In this study MoO{sub 3} nanoparticles were prepared in porous Vycor glass by impregnation-decomposition cycles (IDC) with molybdenum(VI) 2-ethylhexanoate. X-ray diffraction data show that the nanoparticles are crystalline and are in the orthorhombic {alpha}-MoO{sub 3} phase. Raman spectroscopy data also indicate the formation of this phase. The profiles in the Raman spectra changed with the number of IDC, indicating a structural evolution of the MoO{sub 3} nanoparticles. The IDC methodology promoted a linear mass increase and allowed tuning the nanoparticle size. Analysis of HRTEM images revealed that for 3, 5 and 7 IDC, the MoO{sub 3} nanoparticle average diameters are 3.2, 3.6 and 4.2 nm. Diffuse reflectance spectroscopy indicates a consistent red shift in the band gap from 3.35 to 3.29 eV as the size increases from 3.2 to 4.2 nm. This observed red shift in the band gap of the MoO{sub 3} nanoparticles is presumably due to quantum confinement effects. - Graphical abstract: Modification of profile Raman spectra for crystalline MoO{sub 3} nanoparticles in function of the particle size. Highlights: Black-Right-Pointing-Pointer Structural evolution of the MoO{sub 3} nanoparticles as a function of the crystallite size. Black-Right-Pointing-Pointer Tunable optical properties by controlling the MoO{sub 3} nanoparticle size. Black-Right-Pointing-Pointer The impregnation-decomposition methodology allowed tuning the nanoparticle size. Black-Right-Pointing-Pointer The red shift in the band gap of the MoO{sub 3} nanoparticles is due to quantum size effect. Black-Right-Pointing-Pointer The short-distance order in MoO{sub 3} nanoparticle is function to area/volume ratio.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Particle and crystallite size effects on the modulated structure of multiferroic CaMn{sub 7}O{sub 12}

A systematic study of the atomic position modulation in polycrystalline CaMn{sub 7}O{sub 12} with different particle sizes (determined from scanning electron microscopy) and crystallite sizes (determined from X-ray diffraction) is reported. The morphology and phase composition are characterised by scanning electron microscopy, selected area electron diffraction and energy dispersive X-ray spectroscopy. The crystal structure and the atomic position modulation in polycrystalline CaMn{sub 7}O{sub 12} samples are explored with high-resolution synchrotron radiation based powder X-ray diffraction. The modulation vector and the modulation amplitudes observed at T=10 K do not change as a function of particle size, crystallite size and microstrain fluctuations. In addition, we report and discuss the formation of the additional CaMn{sub 4}O{sub 8} nanowire phase during high temperature annealing. - Graphical abstract: The particle size morphology of the multiferroic CaMn{sub 7}O{sub 12} has a weak influence on the atomic position modulation length and the amplitude of the atomic position modulation below T=250 K. Highlights: Black-Right-Pointing-Pointer Atomic position modulation occurs in CaMn{sub 7}O{sub 12} with different particle sizes. Black-Right-Pointing-Pointer The modulation length is the same for different CaMn{sub 7}O{sub 12} particle sizes. Black-Right-Pointing-Pointer Nanowire shaped crystals of CaMn{sub 4}O{sub 8} can be synthesized.

36 MATERIALS SCIENCE↗

Effect of organic solvents on particle size of Mn{sub 3}O{sub 4} nanoparticles synthesized by a solvothermal method

In this paper, a modified simple solvothermal method is employed to synthesize Mn{sub 3}O{sub 4} nanocrystals using four different solvents: acetone, ethanol, N,N-dimethylformamide (DMF), and dimethyl sulfoxide (DMSO). Mn{sub 3}O{sub 4} nanoparticles with a tetragonal hausmannite nano-structure are characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR), as well as superconducting quantum interference device magnetometer (SQUID). The Mn{sub 3}O{sub 4} particle size is found to have a strong dependency on the solvent used. A reaction scheme is proposed to understand this dependency, suggesting that the solvent coordinating capability has a critical effect on Mn{sub 3}O{sub 4} particle size. The stronger the coordinating capability of the solvent is, the smaller the Mn{sub 3}O{sub 4} particle size is. In addition, magnetic properties of the nano-structured Mn{sub 3}O{sub 4} are also tested and discussed. - Graphical abstract: The comparison of the particle size of Mn{sub 3}O{sub 4} nanoparticles synthesized using different solvents and HRTEM image of Mn{sub 3}O{sub 4} individual nanoparticle revealed its single-crystal nature. - Highlights: • Mn{sub 3}O{sub 4} nanocrystals were synthesized using different solvents by a solvothermal method. • The particle size of Mn{sub 3}O{sub 4} nanocrystal is found to have a strong dependency on the solvent used. • A reaction mechanism is proposed to explain the difference of particle size of Mn{sub 3}O{sub 4} nanocrystals. • Magnetic properties of Mn{sub 3}O{sub 4} nanocrystals with different particle size are tested and compared.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characteristic of copper matrix simultaneously reinforced with nano- and micro-sized Al{sub 2}O{sub 3} particles

The effect of the simultaneous presence of nano- and micro-sized Al{sub 2}O{sub 3} particles on the microstructure and properties of copper matrix was the object of this study. The mixture of inert gas-atomized prealloyed copper powder (with 1 wt.% Al) and 0.6 wt.% commercial Al{sub 2}O{sub 3} powder (serving as micro-sized particles) was used as the starting materials. Strengthening of the copper matrix was performed by treating the powders in the air for up to 20 h in the planetary ball mill. During milling of the prealloyed powder, finely dispersed nano-sized Al{sub 2}O{sub 3} particles were formed in situ by internal oxidation. The approximate size of these particles was between 30 and 60 nm. The highest values of microhardness were reached in compacts processed from 10 h-milled powders. The microhardness of compact obtained from 10 h-milled powder was 3 times higher than the microhardness of compact processed from as-received and non-milled prealloyed powder. At the maximum microhardness the grain size reaches the smallest value as a result of the synergetic effect of nano- and micro-sized Al{sub 2}O{sub 3} particles. Recrystallization, which occurred during prolonged milling, was the main factor influencing the decrease in microhardness. The increase in electrical conductivity of compacts after 15 h of milling is the result of the decrease in microhardness and activated recrystallization processes. Highlights: Black-Right-Pointing-Pointer Copper matrix was reinforced with nano- and micro-sized Al{sub 2}O{sub 3} particles. Black-Right-Pointing-Pointer The twofold role of coarse Al{sub 2}O{sub 3} particles in matrix strengthening exists. Black-Right-Pointing-Pointer During shorter milling time these particles contribute to increase of microhardness. Black-Right-Pointing-Pointer At longer milling time decrease in microhardness is related to recrystallization.

36 MATERIALS SCIENCE↗

Effect of particle size on pore three-dimensional characteristics of SiCp preforms by X-ray micro-computed tomography

Highlights: • X-ray μ-CT was used to characterize 3D structures of the pores in SiCp preforms. • 3D pore network models of the pore structure were extracted and analyzed. • With the increase of particle size, the homogeneity of pore distribution decreased. • Small particles in large spaces of coarse particles decreased preform connectivity. - Abstract: Silicon-carbide particle (SiC{sub p}) preforms with particle sizes of 20, 50, 100 and 150 μm were prepared by compression mold forming and heat treatment. A high resolution (~ 1.0 μm) three-dimensional (3D) X-ray micro-computed tomography (X-ray μ-CT) combined with 3D pore-network models were used to study the effect of particle size on 3D characteristics and spatial structures of pores in the preforms. The results demonstrated that as the particle size increased, the gap expansion caused by burning of starch reduced. When the particle size increased from 20 to 100 μm, the average areal porosity, homogeneity of pore distribution, connectivity, the numbers of small pores and throats, and average pore coordination number decreased; the average effective sizes of pores and throats increased. When the particle size further increased to 150 μm, the large gaps were filled by small particles resulted from the broken coarse particles, which decreased the homogeneity and connectivity of pores. As a result, the pore-network analysis shows that the numbers of small pores and throats and average pore coordination number increased.

36 MATERIALS SCIENCE↗

Synthesis of size tuneable cadmium sulphide nanoparticles from a single source precursor using ammonia as the solvent

Graphical abstract: UV-vis absorption spectra for CdS prepared by decomposing cadmium xanthates (Cd(ROCS{sub 2}){sub 2}) exhibit a marked blue-shift with increasing the alkyl chain length (where R denotes: (a) -C{sub 2}H{sub 5}, (b) -C{sub 4}H{sub 9}, (c) -C{sub 8}H{sub 17}, and (d) -C{sub 12}H{sub 25}, respectively), indicating the progressive size reduction of formed CdS nanoparticles. Highlights: Black-Right-Pointing-Pointer Synthesis of CdS nanoparticles using a single source precursor. Black-Right-Pointing-Pointer Tailoring the nanocrystal sizes using cadmium alkyl xanthate with different carbonyl length. Black-Right-Pointing-Pointer Preparation in an environment-friendly solvent. -- Abstract: Size tuneable cadmium sulphide nanoparticles of a few nanometres in size were prepared by thermolysis of a single source precursor of cadmium xanthates with variable carbon chain length (Cd(ROCS{sub 2}){sub 2}, where R denotes -C{sub 2}H{sub 5}, -C{sub 4}H{sub 9}, -C{sub 8}H{sub 17} and -C{sub 12}H{sub 25}, respectively) in an ammonia solution. The particle size, morphology and crystallinity of these nanoparticles were characterized using X-ray powder diffractometry, transmission electron microscopy, and nitrogen adsorption/desorption techniques. The results show that hexagonal CdS nanoparticles can be produced by thermolysis of cadmium alkyl xanthate in an ammonia solution at a temperature as low as 100 Degree-Sign C. The size of CdS particles (between 5.60 nm and 3.71 nm) decreases with increasing length of carbon chain in the precursor, as further confirmed by UV-visible and fluorescence spectrophotometric measurements. The size tuning mechanism of CdS from cadmium alkyl xanthate is also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of oxygen vacancy and photoluminescence in calcium tungstate nanophosphors with different particle sizes

Highlights: • CaWO{sub 4} nanophosphors with different particle sizes were prepared by hydrothermal processes through controlling the concentration of surfactant. • Green emission band of oxygen vacancy in CaWO{sub 4} nanophosphor was clearly observed upon the irradiation of 350 nm excitation. • The concentration of oxygen vacancy in CaWO{sub 4} nanophosphor could be increased by reducing its size. - Abstract: Calcium tungstate (CaWO{sub 4}) nanophosphors with the particle sizes from 35 to 90 nm were synthesized by a hydrothermal process through exactly controlling the pre-treated conditions. The influence of particle size on oxygen vacancy and photoluminescence properties in CaWO{sub 4} nanophosphors was investigated and discussed. The crystal structure of the CaWO{sub 4} nanophosphors presented a certain level of distortion due to the high concentration of oxygen vacancy. Under 350 nm excitation, a clear green emission aroused by oxygen vacancy was observed. The possible luminescence processes for the matrix and oxygen vacancy were proposed. The luminescence spectra of the nanophosphors revealed that the emission and absorption intensity aroused by oxygen vacancy were both enhanced when the size is decreased. On the basis of the above results, the essential relationship between particle size and oxygen vacancy in CaWO{sub 4} nanophosphors was concluded that the concentration of oxygen vacancy could be increased by reducing its size, which was further confirmed by decay lifetimes.

36 MATERIALS SCIENCE↗

Facile synthesis of size-tunable CuO/graphene composites and their high photocatalytic performance

Graphical abstract: A novel leaf-like CuO/graphene nanosheet (GNS) with tunable size was prepared by a facile hydrothermal process, and the stirring temperature in synthesis was found to be effective for controlling its size. - Highlights: • Leaf-like CuO/GNS nanocomposites with tunable size was prepared via hydrothermal method. • With increase of stirring temperature, the surface area becomes larger. • The morphology of nanocomposites plays an important role in photocatalysis. - Abstract: Size-tunable leaf-like copper oxide modified by graphene nanosheets was synthesized by a facile hydrothermal method. Stirring temperature control during synthesis was found to be important in effectively controlling the size of CuO nanoparticles, with smaller size CuO nanoparticles produced by increasing the stirring temperature. The as-prepared nanocomposites were characterized by XRD, TEM, and nitrogen adsorption–desorption. The nanocomposites exhibited better catalytic activity than pure CuO toward the degradation of rhodamine B in the presence of H{sub 2}O{sub 2} under visible light irradiation. The catalytic performance was improved with decreasing particle size of the nanocomposites, which was attributed to the increased in the rate of interelectron transfer at the interface.

36 MATERIALS SCIENCE↗

ED-cPSD: Fast Phase-Size Distribution via Sequential Erosion-Dilation

The Erosion-Dilation continuous Phase-Size Distribution, ED-cPSD, is an application for calculating continuous pore and particle-size distribution from digital reconstructions and/or image-based structural data. It is based on the erosion-dilation continuous phase-size distribution method. A continuous size distribution is a measure of the probability density of finding a particle or pore of a certain size. These distributions are of interest in any field of study involving porous media, including but not limited to electrochemistry, petroleum engineering, geology, and food science. The algorithm behind the software provides a computationally efficient way to calculate phase-size distributions for large domains. For a 3D battery electrode reconstruction with 1.3 x 10 8 voxels, the particle size distribution is derived in under 2 min on a desktop, while also retaining flexibility and computational efficiency for HPC-scale multi-threading. The software can handle structures with over 10 9 voxels. The algorithm is roughly 280 times faster than a previous version on the same task.

Characterization↗

Characterizing how size distribution and concentration affect echogenicity of ultrasound contrast agents

Here, we investigated the effects of UCA gas bubble size distribution and concentration on the generated ultrasound echogenicity signal. Gas bubble size characterization using Coulter Counter and cryogenic-SEM revealed the hollow structure and rare presence of microbubbles >10 µm in a commercial UCA product, Lumason™. Volume-weighed size and concentration were observed to be more sensitive to changes in UCA bubble stability than number-weighted size and concentration. Size distribution measurements showed that the force (e.g., shaking/agitation energy) used to redisperse the sample did not affect the size distribution, concentration, or echogenicity of the UCA sample. The ultrasound backscattering coefficient (BSC) of size fractionated and serial diluted microbubbles showed that the echogenicity signal correlates most with UCA bubble concentration, especially volume-weighted concentration. Findings from this study may be used to support demonstrating the equivalence of a generic UCA product to the reference listed drug.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Multiscale Computational Model for Particle Size Evolution during Coprecipitation of Li-Ion Battery Cathode Precursors

Next generation lithium ion batteries require higher energy and power density, which can be achieved by tailoring the cathode particle morphology, such as particle size, size distribution, and internal porosity. All these morphological features are determined during the cathode synthesis process, which consists of two steps, (i) coprecipitation and (ii) calcination. Transition metal hydroxide precursors are synthesized during the coprecipitation process, whereas their oxidation and lithiation occur during calcination. The size and size distribution of crystalline primary and aggregated secondary particles and their internal porosity are determined during coprecipitation. Operating conditions of the chemical reactor, such as solution pH, ammonia concentration, and stirring speed control the final morphological features. Here, a multiscale computational model has been developed to capture the nucleation and growth of crystalline primary particles and their aggregation into secondary transition metal hydroxide precursor particles. The simulations indicate that increasing solution pH and decreasing ammonia concentration lead to smaller sizes of the secondary particles. Finally, a phase map has been developed that can help identify the synthesis conditions needed for a specified particle size and size distribution.

25 ENERGY STORAGE↗

Colloidally Synthesized Monodisperse Rh Nanoparticles Supported on SBA-15 for Size- and Pretreatment-Dependent Studies of CO Oxidation

A particle size dependence for CO oxidation over rhodium nanoparticles of 1.9-11.3 nm has been investigated and determined to be modified by the existence of the capping agent poly(vinylpyrrolidone) (PVP). The particles were prepared using a polyol reduction procedure with PVP as the capping agent. The Rh nanoparticles were subsequently supported on SBA-15 during hydrothermal synthesis to produce Rh/SBA-15 supported catalysts for size-dependent catalytic studies. CO oxidation by O{sub 2} at 40 Torr CO and 100 Torr O{sub 2} was investigated over two series of Rh/SBA-15 catalysts: as-synthesized Rh/SBA-15 covering the full range of Rh sizes and the same set of catalysts after high temperature calcination and reduction. The turnover frequency at 443 K increases from 0.4 to 1.7 s{sup -1} as the particle size decreases from 11.3 to 1.9 nm for the as-synthesized catalysts. After calcination and reduction, the turnover frequency is between 0.1 and 0.4 s{sup -1} with no particle size dependence. The apparent activation energy for all catalysts is {approx}30 kcal mol{sup -1} and is independent of particle size and thermal treatment. Infrared spectroscopy of CO on the Rh nanoparticles indicates that the heat treatments used influence the mode of CO adsorption. As a result, the particle size dependence for CO oxidation is altered after calcination and reduction of the catalysts. CO adsorbs at two distinct bridge sites on as-synthesized Rh/SBA-15, attributable to metallic Rh(0) and oxidized Rh(I) bridge sites. After calcination and reduction, however, CO adsorbs only at Rh(0) atop sites. The change in adsorption geometry and oxidation activity may be attributable to the interaction between PVP and the Rh surface. This capping agent affect may open new possibilities for the tailoring of metal catalysts using solution nanoparticle synthesis methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying Streambed Grain Size, Uncertainty, and Hydrobiogeochemical Parameters Using Machine Learning Model YOLO

Abstract Streambed grain sizes control river hydro‐biogeochemical (HBGC) processes and functions. However, measuring their quantities, distributions, and uncertainties is challenging due to the diversity and heterogeneity of natural streams. This work presents a photo‐driven, artificial intelligence (AI)‐enabled, and theory‐based workflow for extracting the quantities, distributions, and uncertainties of streambed grain sizes from photos. Specifically, we first trained You Only Look Once, an object detection AI, using 11,977 grain labels from 36 photos collected from nine different stream environments. We demonstrated its accuracy with a coefficient of determination of 0.98, a Nash–Sutcliffe efficiency of 0.98, and a mean absolute relative error of 6.65% in predicting the median grain size of 20 ground‐truth photos representing nine typical stream environments. The AI is then used to extract the grain size distributions and determine their characteristic grain sizes, including the 10th, 50th, 60th, and 84th percentiles, for 1,999 photos taken at 66 sites within a watershed in the Northwest US. The results indicate that the 10th, median, 60th, and 84th percentiles of the grain sizes follow log‐normal distributions, with most likely values of 2.49, 6.62, 7.68, and 10.78 cm, respectively. The average uncertainties associated with these values are 9.70%, 7.33%, 9.27%, and 11.11%, respectively. These data allow for the computation of the quantities, distributions, and uncertainties of streambed HBGC parameters, including Manning's coefficient, Darcy‐Weisbach friction factor, top layer interstitial velocity magnitude, and nitrate uptake velocity. Additionally, major sources of uncertainty in grain sizes and their impact on HBGC parameters are examined.

58 GEOSCIENCES↗

Using laser induced shock waves to investigate the nanoparticle transition from bulk behavior to discrete atom/finite size behavior

As particle size becomes smaller, finite size effects become important and thermo-mechanical properties of nanoparticles, such as the bulk modulus, deviate from the values of larger size particles. The change in properties from the bulk values is important from an applied standpoint as nanoparticles are used in various applications. The deviation in properties is also important for testing fundamental theories of atomic interactions in finite size systems. A first principles model has been developed that allows the prediction of all thermomechanical effects that will be generated from any laser pulse incident on a nanoparticle. This theoretical work also predicts the thermo-mechanical effects transmitted to he surrounding transparent medium that the nanoparticles is immersed in, such as water or a solid polymer. The use of short enough pulses produces a train of shock fronts in the surrounding medium. We show that measurements of these shock fronts out in the medium generated by particles of decreasing size allow the determination of the size at which a nanoparticle is small enough to deviate from its bulk behavior and manifest finite size effects. Because the measurements can be made in the surrounding medium, they are easier to perform experimentally.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Size exclusion deep bed filtration: Experimental and modelling uncertainties

A detailed uncertainty analysis associated with carboxyl-modified latex particle capture in glass bead-formed porous media enabled verification of the two theoretical stochastic models for prediction of particle retention due to size exclusion. At the beginning of this analysis it is established that size exclusion is a dominant particle capture mechanism in the present study: calculated significant repulsive Derjaguin-Landau-Verwey-Overbeek potential between latex particles and glass beads is an indication of their mutual repulsion, thus, fulfilling the necessary condition for size exclusion. Applying linear uncertainty propagation method in the form of truncated Taylor's series expansion, combined standard uncertainties (CSUs) in normalised suspended particle concentrations are calculated using CSUs in experimentally determined parameters such as: an inlet volumetric flowrate of suspension, particle number in suspensions, particle concentrations in inlet and outlet streams, particle and pore throat size distributions. Weathering of glass beads in high alkaline solutions does not appreciably change particle size distribution, and, therefore, is not considered as an additional contributor to the weighted mean particle radius and corresponded weighted mean standard deviation. Weighted mean particle radius and LogNormal mean pore throat radius are characterised by the highest CSUs among all experimental parameters translating to high CSU in the jamming ratio factor (dimensionless particle size). Normalised suspended particle concentrations calculated via two theoretical models are characterised by higher CSUs than those for experimental data. The model accounting the fraction of inaccessible flow as a function of latex particle radius excellently predicts normalised suspended particle concentrations for the whole range of jamming ratios. The presented uncertainty analysis can be also used for comparison of intra- and inter-laboratory particle size exclusion data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observations on size confinement effect in B-C-N nanoparticles embedded in mesoporous silica channels

Fluorescent B-C-N/silica nanoparticles were synthesized by solution impregnation method. Effect of B-C-N particle size on the optical properties was investigated by varying the silica pore sizes. Formation of B-C-N nanoparticles within the mesoporous matrix is confirmed by x-ray diffraction, transmission electron microscopy, and Fourier transform infrared spectroscopy. Furthermore, a remarkable blue-shift in emission peak centres with decreasing pore size in conjugation with band gap modification, ascribed to the size confinement effect. A detailed analysis of experimental results by theoretically defined confinement models demonstrates that the B-C-N nanoparticles in the size range of 3–13 nm falls within the confinement regime. This work demonstrated the experimental evidence of the size confinement effect in smaller size B-C-N nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Direct observation of metal nanoparticles as heterogeneous nuclei for the condensation of supersaturated organic vapors: Nucleation of size-selected aluminum nanoparticles in acetonitrile and n-hexane vapors

This work reports the direct observation and separation of size-selected aluminum nanoparticles acting as heterogeneous nuclei for the condensation of supersaturated vapors of both polar and nonpolar molecules. In the experiment, we study the condensation of supersaturated acetonitrile and n-hexane vapors on charged and neutral Al nanoparticles by activation of the metal nanoparticles to act as heterogeneous nuclei for the condensation of the organic vapor. Aluminum seed nanoparticles with diameters of 1 and 2 nm are capable of acting as heterogeneous nuclei for the condensation of supersaturated acetonitrile and hexane vapors. The comparison between the Kelvin and Fletcher diameters indicates that for the heterogeneous nucleation of both acetonitrile and hexane vapors, particles are activated at significantly smaller sizes than predicted by the Kelvin equation. The activation of the Al nanoparticles occurs at nearly 40% and 65% of the onset of homogeneous nucleation of acetonitrile and hexane supersaturated vapors, respectively. The lower activation of the charged Al nanoparticles in acetonitrile vapor is due to the charge-dipole interaction which results in rapid condensation of the highly polar acetonitrile molecules on the charged Al nanoparticles. The charge-dipole interaction decreases with increasing the size of the Al nanoparticles and therefore at low supersaturations, most of the heterogeneous nucleation events are occurring on neutral nanoparticles. No sign effect has been observed for the condensation of the organic vapors on the positively and negatively charged Al nanoparticles. The present approach of generating metal nanoparticles by pulsed laser vaporization within a supersaturated organic vapor allows for efficient separation between nucleation and growth of the metal nanoparticles and, consequently controls the average particle size, particle density, and particle size distribution within the liquid droplets of the condensing vapor. Strong correlation is found between the seed nanoparticle's size and the degree of the supersaturation of the condensing vapor. This result and the agreement among the calculated Kelvin diameters and the size of the nucleating Al nanoparticles determined by transmission electron microscopy provide strong proof for the development of a new approach for the separation and characterization of heterogeneous nuclei formed in organic vapors. These processes can take place in the atmosphere by a combination of several organic species including polar compounds which could be very efficient in activating charged nanoparticles and cluster ions of atmospheric relevance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗