SEARCH · Search NASA

Results for “SLIP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Combustion of liquid sprays at high pressures

The combustion of pressure atomized fuel sprays in high pressure stagnant air was studied. Measurements were made of flame and spray boundaries at pressures in the range 0.1-9 MPa for methanol and n-pentane. At the higher test pressure levels, critical phenomena are important. The experiments are compared with theoretical predictions based on a locally homogeneous two-phase flow model. The theory correctly predicted the trends of the data, but underestimates flame and spray boundaries by 30-50 percent, indicating that slip is still important for the present experiments (Sauter mean diameters of 30 microns at atmospheric pressure under cold flow conditions). Since the sprays are shorter at high pressures, slip effects are still important even though the density ratio of the phases approach one another as the droplets heat up. The model indicates the presence of a region where condensed water is present within the spray and provides a convenient means of treating supercritical phenomena.

Shearer, A. J.↗

NASA NTRS1978

The behavior of a convergent plate boundary - Crustal deformation in the South Kanto district, Japan

The northwesternmost part of the Sagami trough, a part of the Philippine Sea-Eurasian plate boundary, was ruptured during the great South Kanto earthquake in 1923. Very extensive and frequent geodetic measurements of crustal deformation have been made in the South Kanto district since the 1890's, and these constitute the most complete data set on crustal movements in the world. These data were reanalyzed and interpreted and according to our interpretation indicate the following sequence of events. The coseismic movements were due to oblique thrust and right lateral slip of about 8 m on a fault outcropping at the base of the Sagami trough. This was followed by postseismic deformation resulting from reversed afterslip of 20-60 cm that occurred at an exponentially decaying rate in time. The interseismic deformation is produced by steady subduction at a rate of about 1.8 cm/yr. During subduction the top 10-15 km of the plate boundary is apparently locked, while deeper parts slip aseismically at an irregular rate. No significant precursory deformation was observed. The recurrence time for 1923 type earthquakes is 200-300 years. The Boso and Miura peninsulas are broken into a series of fault-bound blocks that move semi-independently of the surrounding region. The subduction zone itself, where it is exposed on land, is shown to be a wide zone encompassing several faults that are active at different times.

Scholz, C. H.↗

NASA NTRS1978

Investigation of the fracture mechanism of Ti-5Al-2.5Sn at cryogenic temperatures

Fractography and metallographic sectioning were used to investigate the influence of microstructure on the fracture mechanism and fracture toughness (KIC) of normal interstitial and extra low interstitial (ELI) Ti-5Al-25Sn at 20 K (-423 F) and 77 K (-320 F). Plates of each grade were mill annealed at 815 C followed by either air or furnace cooling. These variations in composition and cooling rate resulted in differences in the volume fraction and internal structure of the dispersed beta phase and in the ordering of the alpha matrix. The ELI alloys were tougher than the normal interstitial plates. KIC of the furnace-cooled ELI plate was 25% lower than that of the air-cooled ELI material. Variations in cooling rate had no influence of KIC of the normal interstitial alloys. Fractography showed that a large portion of the fracture surfaces were covered with elongated dimples. Metallographic sections of specimens deformed at 77 K showed that these features form at the intersections of slip bands or deformation twins with grain or twin boundaries. Ordering and higher interstitial levels increase the local strain in slip bands resulting in void nucleation at lower macroscopic strains and lower KIC values.

Van Stone, R. H.↗

NASA NTRS1978

Structures for hypersonic airbreathing tactical missiles

The studies to date were encouraging and indicated that materials were available or could be developed to satisfy scramjet requirements. Some of the more promising materials for the critical components were indicated. This information is summarized as follows : (1) radome - Slip cast fused silica is the current candidate, but others are being investigated. One shortcoming of slip cast fused silica is its susceptability to rain damage. (2) inlet leading edges - A refractory metal with a good oxidation protective coating will be required. Tantalum T222 with a Hafnia coating looks promising. (3) inlet ducts - An uninsulated refractory alloy will be required. Columbium F-85 was the best of those considered for the noncircular ducts. (4) external body - The external body temperatures are sufficiently low to permit the use of super alloys. (5) combustor and nozzle - The pyrolytic graphite/silicon carbide coating is very attractive for use in the combustor and nozzle areas.

Caywood, W. C.↗

NASA NTRS1979

Shaft seal assembly for high speed and high pressure applications

A seal assembly is provided for reducing the escape of fluids from between a housing and a shaft rotably mounted in the housing. The seal assembly comprises a pair of seal rings resiliently connected to each other and disposed in side-by-side relationship. In each seal ring, both the internal bore surface and the radial face which faces away from the other seal ring are provided with a plurality of equi-spaced recesses. The seal faces referred to are located adjacent a seating surface of the housing. Under normal operating conditions, the seal assembly is stationary with respect to the housing, and the recesses generate life, keep the assembly spaced from the rotating shaft and allow slip therebetween. The seal assembly can seize on the shaft, and slip will then occur between the radial faces and the housing.

Hadt, W. F.↗

NASA NTRS1979

Traction drive performance prediction for the Johnson and Tevaarwerk traction model

The fluid rheology model is used to investigate the traction behavior for typical traction drive contacts. The aspect ratio of the contact and the invariably present spin are investigated. Contacts with a low aspect ratio predict a superior performance in that they show less slip for the same degree of traction. Spin always has a diminishing effect on the traction at the same slip. At sufficiently high spin the model may be simplified to a limiting shear stress model. The conventional rigid plastic analysis applies here equally well.

Tevaarwerk, J. L.↗

NASA NTRS1979

An acoustic emission study of plastic deformation in polycrystalline aluminium

Acoustic emission experiments were performed on polycrystalline and single crystal 99.99% aluminum while undergoing tensile deformation. It was found that acoustic emission counts as a function of grain size showed a maximum value at a particular grain size. Furthermore, the slip area associated with this particular grain size corresponded to the threshold level of detectability of single dislocation slip events. The rate of decline in acoustic emission activity as grain size is increased beyond the peak value suggests that grain boundary associated dislocation sources are giving rise to the bulk of the detected acoustic emissions.

Bill, R. C.↗

NASA NTRS1979

Internal corner flow fields

A computational procedure has been developed to predict the inviscid super/hypersonic flow field of conical internal corners. The prediction of internal corner flow fields can be important in the design of supersonic 'box' type inlets. The computational procedure utilizes a second order finite difference marching technique to asymptote to the conical corner flow solution of Euler's equations. These flow fields are dominated by complex shock interactions. All discontinuities, shocks and slip surfaces are fitted with the appropriate jump conditions. The 'triple' points (the interaction of two shocks and a slip surface) are also computed exactly. Computed results are compared with experimental data and the computational results of other investigators. In addition, the sensitivity of these flow fields to a number of geometric parameters is studied, and the impact of these flows on inlet performance is assessed.

Marconi, F.↗

NASA NTRS1980

Anisotropy of nickel-base superalloy single crystals

The influence of orientation on the tensile and stress rupture behavior of 52 Mar-M247 single crystals was studied. Tensile tests were performed at temperatures between 23 and 1093 C; stress rupture behavior was examined between 760 and 1038 C. The mechanical behavior of the single crystals was rationalized on the basis of the Schmid factor contours for the operative slip systems and the lattice rotations which the crystals underwent during deformation. The tensile properties correlated well with the appropriate Schmid factor contours. The stress rupture lives at lower testing temperatures were greatly influenced by the lattice rotations required to produce cross slip. A unified analysis was attained for the stress rupture life data generated for the Mar-M247 single crystals at 760 and 774 C under a stress of 724 MPa and the data reported for Mar-M200 single crystals tested at 760 C under a stress of 689 MPa. Based on this analysis, the stereographic triangle was divided into several regions which were rank ordered according to stress rupture life for this temperature regime.

Mackay, R. A.↗

NASA NTRS1980

Release-rate calorimetry of multilayered materials for aircraft seats

Multilayered samples of contemporary and improved fire-resistant aircraft seat materials (foam cushion, decorative fabric, slip sheet, fire-blocking layer, and cushion-reinforcement layer) were evaluated for their rates of heat release and smoke generation. Top layers (decorative fabric, slip sheet, fire blocking, and cushion reinforcement) with glass-fiber block cushion were evaluated to determine which materials, based on their minimum contributions to the total heat release of the multilayered assembly, may be added or deleted. Top layers exhibiting desirable burning profiles were combined with foam cushion materials. The smoke and heat-release rate of multilayered seat materials were then measured at heat fluxes of 1.5 and 3.5 W/sq cm. Choices of contact and silicon adhesives for bonding multilayered assemblies were based on flammability, burn and smoke generation, animal toxicity tests, and thermal gravimetric analysis.

Fewell, L. L.↗

NASA NTRS1980

Anisotropy of nickel-base superalloy single crystals

The effects of crystal orientation on the mechanical properties of single crystals of the nickel-based superalloy Mar-M247 are investigated. Tensile tests at temperatures from 23 to 1093 C and stress rupture tests at temperatures from 760 to 1038 C were performed for 52 single crystals at various orientations. During tensile testing between 23 and 760 C, single crystals with high Schmid factors were found to be favorably oriented for slip and to exhibit lower strength and higher ductility than those with low Schmid factors. Crystals which required large rotations to become oriented for cross slip were observed to have the shortest stress rupture lives at 760 C, while those which required little or no rotation had the longest lives. In addition, stereographic triangles obtained for Mar-M247 and Mar-M200 single crystals reveal that crystals with orientations near the -111 had the highest lives, those near the 001 had high lives, and those near the 011 had low lives.

Mackay, R. A.↗

NASA NTRS1980

Time dependent deformation and stress in the lithosphere

Efficient computer programs incorporating frontal solution and time stepping procedure were developed for the modelling of geodynamic problems. This scheme allows for investigating the quasi static phenomena including the effects of the rheological structure of a tectonically active region. From three dimensional models of strike slip earthquakes, it was found that lateral variation of viscosity affects the characteristics of surface deformations. The vertical deformation is especially informative about the viscosity structure in a strike slip fault zone. A three dimensional viscoelastic model of a thrust earthquake indicated that the transient disturbance on plate velocity due to a great plate boundary earthquake is significant at intermediate distances, but becomes barely measurable 1000 km away from the source.

Yang, M.↗

NASA NTRS1981

Postseismic rebound due to creep of the lower lithosphere and asthenosphere

Postseismic surface deformations are attributed to the inelastic flow of the subcrustal regions of the Earth following an earthquake. A multilayer representation of the Earth's rheological properties is used in conjunction with a finite element computational scheme to calculate time dependent displacements and strains subsequent to a strike slip earthquake. The deviatoric stress strain relations for the uppermost layer is assumed elastic. Lower layers are assumed to be, in order of increasing depth, a standard, linear, three element, viscoelastic solid; a linear viscoelastic fluid; and another elastic solid. Physically these layers correspond to the upper lithosphere, lower lithosphere, asthenosphere, and lower mantle, respectively. Elastic dilatational properties are assumed throughout. Appreciable postseismic displacements, possibly approaching meters, for large earthquakes, arise from viscoelastic relaxation following sudden coseismic slip. Furthermore, compared to the simpler case of an elastic lithosphere over a viscoelastic asthenosphere and the near fault postseismic shear, strain is increased, by a factor of two or more in some cases, by the presence of a viscoelastic lower lithosphere. Also, the duration of postseismic straining is increased by the relatively slow relaxation of this layer.

Cohen, S. C.↗

NASA NTRS1981

Horizontal wind estimates deterministically derived from the STS-1 entry flight date--a comparison with available meteorology data

Two wind profiles were determined from STS-1 entry flight data based on preliminary best estimate trajectory (BET). The deterministic process used in deriving the atmospheric winds requires inertial estimates of the spacecraft angle-of-attack (alpha) and side-slip angle (beta) from the BET in conjunction with some air data system measurements of the actual angles. The current orbiter air data system (OADS) provides the necessary alpha information. Two beta profiles were adopted. The first profile assumed that the spacecraft would weathervane into any prevailing wind. The second assumed a conservative side-slip history computed from measured accelerations in the spacecraft body axes. It is shown that there are no major differences between the deterministic winds computed using both methods. Further, comparisons of these winds with raw measurements from Tehachapi, California, and preliminary winds obtained from the LaRC LAIRS file and the JSC/TRW descent BET are presented.

Kelly, G. M.↗

NASA NTRS1982

Vertical axis wind turbine drive train transient dynamics

Start up of a vertical axis wind turbine causes transient torque oscillations in the drive train with peak torques which may be over two and one half times the rated torque of the turbine. A computer code, based on a lumped parameter model of the drive train, was developed and tested for the low cost 17 meter turbine; the results show excellent agreement with field data. The code was used to predict the effect of a slip clutch on transient torque oscillations. It was demonstrated that a slip clutch located between the motor and brake can reduce peak torques by thirty eight percent.

Clauss, D. B.↗

NASA NTRS1982

A simple finite difference procedure for the vortex controlled diffuser

A simple prediction procedure for sudden expansion incompressible flows is developed and applied to the vortex controlled diffuser. Transient Navier-Stokes equations of an incompressible fluid are solved by means of their associated finite difference equations in terms of the primitive pressure velocity variables. A computer code is developed using a laminar flow simulation with free slip or no slip wall boundary conditions. In addition, predicted results confirm that effectiveness increases with increases in duct length and bleed flow rate

Busnaina, A. A.↗

NASA NTRS1982

Bluff-body flameholder wakes - A simple numerical solution

Numerical finite difference predictions are made of recirculation zones behind bluff-body flame stabilizers, showing quantitatively the effects of forebody geometry, blockage ratio, lateral position of the blockage and inlet swirl on the central recirculation zone. A simple transient Navier-Stokes solution algorithm and laminar flow simulation are used with 'free slip' and 'no slip' wall boundary conditions, thus illustrating how a basic approach may be used to solve a sophisticated fluid dynamic problem.

Vatistas, G. H.↗

NASA NTRS1983

Improved Connector Shell for Cable Shields

Cable connector shell improves electrostatic and electromagnetic shielding by electrically connecting cable braid around entire circumference. Connector cable braid is slipped over ferrule and sleeve is slipped over braid, clamping it tightly to shell. Connector shell completely shields cable conductors.

Prisk, A. L.↗