Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS RELAXATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Viscoelastic Response of the Titanium Alloy Ti-6-4: Experimental Identification of Time- and Rate-Dependent Reversible and Irreversible Deformation Regions

In support of an effort on damage prognosis, the viscoelastic behavior of Ti-6Al-4V (Ti-6-4) was investigated. This report documents the experimental characterization of this titanium alloy. Various uniaxial tests were conducted to low load levels over the temperature range of 20 to 538 C to define tensile, creep, and relaxation behavior. A range of strain rates (6x10(exp -7) to 0.001/s) were used to document rate effects. All tests were designed to include an unloading portion, followed by a hold time at temperature to allow recovery to occur either at zero stress or strain. The titanium alloy was found to exhibit viscoelastic behavior below the "yield" point and over the entire range of temperatures (although at lower temperatures the magnitude is extremely small). These experimental data will be used for future characterization of a viscoelastic model.

stress relaxation↗

Compositionally graded relaxed AlGaN buffers on semipolar GaN for mid-ultraviolet emission

In this Letter, we report on the growth and properties of relaxed, compositionally graded Al{sub x}Ga{sub 1-x}N buffer layers on freestanding semipolar (2021) GaN substrates. Continuous and step compositional grades with Al concentrations up to x = 0.61 have been achieved, with emission wavelengths in the mid-ultraviolet region as low as 265 nm. Coherency stresses were relaxed progressively throughout the grades by misfit dislocation generation via primary (basal) slip and secondary (non-basal) slip systems. Threading dislocation densities in the final layers of the grades were less than 10{sup 6}/cm{sup 2} as confirmed by plan-view transmission electron microscopy and cathodoluminescence studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferroelasticity in a metal-organic framework perovskite; towards a new class of multiferroics

A metal–organic framework perovskite, [(CH 2 ) 3 NH 2 ][Mn(HCOO) 3 ], exhibits a weakly first order ferroelastic phase transition at ~272 K, from orthorhombic Pnma to monoclinic P2 1 /n, and a further transition associated with antiferromagnetic ordering at ~8.5 K. The main structural changes, through the phase transition, are orientational ordering of the azetidium groups and associated changes in hydrogen bonding. In marked contrast to conventional improper ferroelastic oxide perovskites, the driving mechanism is associated with the X-point of the cubic Brillouin zone rather than being driven by R- and M-point octahedral tilting. The total ferroelastic shear strain of up to ~5% is substantially greater than found for typical oxide perovskites, and highlights the potential of the flexible framework to undergo large relaxations in response to local structural changes. Measurements of elastic and anelastic properties by resonant ultrasound spectroscopy show some of the characteristic features of ferroelastic materials. In particular, acoustic dissipation below the transition point can be understood in terms of mobility of twin walls under the influence of external stress with relaxation times on the order of ~10 -7 s. Elastic softening as the transition is approached from above is interpreted in terms of coupling between acoustic modes and dynamic local ordering of the azetidium groups. Subsequent stiffening with further temperature reduction is interpreted in terms of classical strain–order parameter coupling at an improper ferroelastic transition which is close to being tricritical. By way of contrast, there are no overt changes in elastic or anelastic properties near 9 K, implying that any coupling of the antiferromagnetic order parameter with strain is weak or negligible.

Li, Wei↗

Defect Structure of GaAs Layers Implanted with Nitrogen Ions

Structural defects formed in epitaxial GaAs layers as a result of 250-keV N{sup +} ion implantation to doses within 5 × 10{sup 14}–5 × 10{sup 16} cm{sup –2} have been studied by the X-ray diffraction (XRD) and transmission electron microscopy techniques. No amorphization of the ion-implanted layer took place in the entire dose range studied. The implantation to doses of 5 × 10{sup 14} and 5 × 10{sup 15} cm{sup –2} led to the appearance of an additional peak on XRD curves, which was related to the formation of a stressed GaAs layer with positive deformation arising due to the formation of point-defect clusters. The implantation to a dose of 5 × 10{sup 16} cm{sup –2} led to the formation of a dense structure of extended defects in the implanted layer, which was accompanied by the relaxation of macrostresses to the initial state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain relaxation of metastable SiGe/Si: Investigation with two complementary X-ray techniques

Metastable and strain relaxed SiGe layers with about 20% Ge content have been grown by molecular beam epitaxy on Si substrates at 550 deg. C. The thickness regime of metastability and the onset of strain relaxation were investigated on dust particle free surfaces obtained by careful chemical cleaning and epitaxy loading under clean room conditions. Compared to earlier results true metastable regime without misfit dislocations was obtained up to 140 nm thickness. The onset of strain relaxation started with heterogeneous nucleation sites of misfit dislocations. X-ray topography proved to be a unique monitoring tool to observe a low density of single dislocations. From these results we suggested to define a critical thickness band with lower bound t{sub cl} from dislocation nucleation to an upper bound t{sub co} (600 nm in our case) defined by the onset of considerable strain relaxation. The strain relief was measured by X-ray diffraction (reciprocal space mapping) and found to be very abrupt (76% strain relaxation at 800 nm thickness).

36 MATERIALS SCIENCE↗

Flexible Microstrip Circuits for Superconducting Electronics

Flexible circuits with superconducting wiring atop polyimide thin films are being studied to connect large numbers of wires between stages in cryogenic apparatus with low heat load. The feasibility of a full microstrip process, consisting of two layers of superconducting material separated by a thin dielectric layer on 5 mil (approximately 0.13 mm) Kapton sheets, where manageable residual stress remains in the polyimide film after processing, has been demonstrated. The goal is a 2-mil (approximately 0.051-mm) process using spin-on polyimide to take advantage of the smoother polyimide surface for achieving highquality metal films. Integration of microstrip wiring with this polyimide film may require high-temperature bakes to relax the stress in the polyimide film between metallization steps.

Chervenak, James↗

RECONSTRUCTION OF THE CORONAL MAGNETIC FIELD USING THE CESE-MHD METHOD

We present a new implementation of the MHD relaxation method for reconstruction of the nearly force-free coronal magnetic field from a photospheric vector magnetogram. A new numerical MHD scheme is proposed to solve the full MHD equations by using the spacetime conservation-element and solution-element method. The bottom boundary condition is prescribed in a similar way as in the stress-and-relax method, by changing the transverse field incrementally to match the magnetogram, and other boundaries of the computational box are set by the nonreflecting boundary conditions. Applications to the well-known benchmarks for nonlinear force-free-field reconstruction, the Low and Lou force-free equilibria, validate the method and confirm its capability for future practical application, with observed magnetograms as inputs.

79 ASTRONOMY AND ASTROPHYSICS↗

Short and medium range structure in elastic deformation of metallic and covalent glasses

Here, we present a concise methodology to analyze structural response to the applied stress in amorphous solids, including metallic glasses (MG), glassy selenium, silica and polycarbonate, using high energy x-ray diffraction and atomic pair distribution function (PDF) analysis. To assess the structural anisotropy induced by applied axial stress, diffraction data were expanded into spherical harmonics. Using Bessel transformation, components of the structure function were converted into isotropic and anisotropic PDFs. The PDFs were compared to the expected model behavior for ideal elastic deformation to separate homogeneous affine strain from local non-affine strains. In metallic glass the range of non-affine deformation is limited to the nearest neighbor shell, suggesting local strain relaxation under stress that occurs even in the elastic regime. Beyond the second atomic shell strain is uniform. However, in glassy silica, polycarbonate and selenium strong local bonding inhibits local displacements and strain in short range order is accommodated by rotation of local units. Interestingly, beyond a molecular unit, deformation in covalent systems is similar to MG, and response of the medium range order scales with the macroscopic stress.

glassy structure↗

Dynamic Deformation in Nuclear Graphite and Underlying Mechanisms

Time-dependent deformation in nuclear graphite is influenced by the creation and migration of radiation-induced defects in the reactor environment. This study investigates the role of pre-existing defects such as point defect clusters and Mrozowski cracks in nuclear graphite IG-110. Separate specimens were irradiated with a 2.8 MeV Au 2+ beam with a fluence of 4.38 × 10 14 cm −2 and an 8 MeV C 2+ beam with a fluence of 1.24 × 10 16 cm −2 . Microscopic specimens were either mechanically loaded inside a transmission electron microscope (TEM) or subjected to ex situ indentation-based creep loading. In situ TEM tests showed significant plasticity in regions highly localized around the Mrozowski cracks, resembling slip or ripplocation bands. Slip bands were also seen near regions without pre-existing defects but at very high stresses. Ex situ self-ion irradiation embrittled the specimens and decreased the creep displacement and rate, while heavy ion irradiation resulted in the opposite behavior. We hypothesize that the large-sized gold ions (compared to the carbon atoms) induced interplanar swelling as well as cross-plane channels for increased defect mobility. These findings illustrate the role of pre-existing defects in the dynamic relaxation of stresses during irradiation and the need for more studies into the radiation environment’s impact on the mechanical response of nuclear graphite.

creep deformation↗

Molecular beam epitaxy growth of PbSe on Si (211) using a ZnTe buffer layer

The authors report the results of successful growth of single crystalline PbSe on Si (211) substrates with ZnTe as a buffer layer by molecular beam epitaxy. Single crystalline PbSe with (511) orientation was achieved on ZnTe/Si (211), as evidenced by RHEED patterns indicative of 2 dimensional (2D) growth, x ray diffraction rocking curves with a full width at half maximum as low as 153 arc sec and mobility as large as 1.1x10{sup 4}cm{sup 2}V{sup -1}s{sup -1} at 77 K. Cross hatch patterns were found on the PbSe(511) surface in Nomarski filtered microscope images suggesting the presence of a surface thermal strain relaxation mechanism, which was confirmed by Fourier transformed high resolution transmission electron microscope images.

36 MATERIALS SCIENCE↗

The relationship between depth-resolved composition and strain relaxation in InAlN and InGaN films grown by molecular beam epitaxy

A study of the relationship between strain and the incorporation of group III elements in ternary InGaN and InAlN grown by molecular beam epitaxy is reported. Using X-ray Photoelectron Spectroscopy compositional depth profiles with x-ray diffraction, we are able to find a clear relationship between strain and In incorporation including tensile-strained InAlN which has, to date, not been studied. The results show that fully strained films contain homogeneous indium composition while partially relaxed films have a non-homogeneous indium composition with depth. These results can be interpreted by considering the impurity formation energies of indium in host lattices.

36 MATERIALS SCIENCE↗

Water uptake by growing cells: an assessment of the controlling roles of wall relaxation, solute uptake, and hydraulic conductance

Growing plant cells increase in volume principally by water uptake into the vacuole. There are only three general mechanisms by which a cell can modulate the process of water uptake: (a) by relaxing wall stress to reduce cell turgor pressure (thereby reducing cell water potential), (b) by modifying the solute content of the cell or its surroundings (likewise affecting water potential), and (c) by changing the hydraulic conductance of the water uptake pathway (this works only for cells remote from water potential equilibrium). Recent studies supporting each of these potential mechanisms are reviewed and critically assessed. The importance of solute uptake and hydraulic conductance is advocated by some recent studies, but the evidence is indirect and conclusions remain controversial. For most growing plant cells with substantial turgor pressure, it appears that reduction in cell turgor pressure, as a consequence of wall relaxation, serves as the major initiator and control point for plant cell enlargement. Two views of wall relaxation as a viscoelastic or a chemorheological process are compared and distinguished.

Non-NASA Center↗

Growth temperature control of the epitaxy, magnetism, and transport in SrTiO{sub 3}(001)/La{sub 0.5}Sr{sub 0.5}CoO{sub 3} thin films

The authors report a detailed study of the influence of deposition temperature on the microstructure, phase purity, nanoscale chemical homogeneity, stoichiometry, and magnetic and electronic properties of epitaxial La{sub 0.5}Sr{sub 0.5}CoO{sub 3} thin films grown on SrTiO{sub 3}(001) substrates via reactive dc magnetron sputtering. The results are interpreted in terms of the temperature-dependent interplay between crystallization, strain relaxation, and cation mobility (which improve with increasing deposition temperature), and oxygenation (which deteriorates at the highest deposition temperatures). In addition to the established approach to epitaxial sputter deposition based on high temperature deposition combined with subsequent ex situ annealing in O{sub 2}, our results also identify a narrow deposition temperature window {approx}600-625 deg. C, where single phase, highly crystalline, low surface roughness epitaxial films can be obtained with close to ideal stoichiometry without postdeposition annealing. Electronic and magnetic properties similar to bulk single crystals can be obtained in this region.

36 MATERIALS SCIENCE↗

Critical thickness of atomically ordered III-V alloys

The critical thickness model is modified with a general boundary energy that describes the change in bulk energy as a dislocation regularly alters the atomic structure of an ordered material. The model is evaluated for dislocations gliding through CuPt-ordered GaInP and GaInAs, where the boundary energy is negative and the boundary is stable. With ordering present, the critical thickness is significantly lowered and remains finite as the mismatch strain approaches zero. The reduction in critical thickness is most significant when the order parameter is greatest and the amount of misfit energy is low. The modified model is experimentally validated for low-misfit GaInP epilayers with varying order parameters using in situ wafer curvature and ex situ cathodoluminescence. With strong ordering, relaxation begins at a lower thickness and occurs at a greater rate, which is consistent with a lower critical thickness and increased glide force. Thus, atomic ordering is an important consideration for the stability of lattice-mismatched devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In-situ synchrotron micro-diffraction study of surface, interface, grain structure, and strain/stress evolution during Sn whisker/hillock formation

We have performed X-ray synchrotron micro-diffraction measurements to study the processes controlling the formation of hillocks and whiskers in Sn layers on Cu. The studies were done in real-time on Sn layers that were electro-deposited immediately before the X-ray measurements were started. This enabled a region of the sample to be monitored from the as-deposited state until after a hillock feature formed. In addition to measuring the grain orientation and deviatoric strain (via Laue diffraction), the X-ray fluorescence was monitored to quantify the evolution of the Sn surface morphology and the formation of intermetallic compound (IMC) at the Sn-Cu interface. The results capture the simultaneous growth of the feature and the corresponding film stress, grain orientation, and IMC formation. The observations are compared with proposed mechanisms for whisker/hillock growth and nucleation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoluminescence of silicon after deposition of polycrystalline diamond films

Low-temperature (5K) photoluminescence of silicon substrates in the range 0.8-1.2 eV is studied before and after deposition of polycrystalline diamond films. The diamond films were deposited in the microwave plasma onto high-purity dislocation-free silicon (with the resitivity {rho} {approx} 3 k{Omega} cm) subjected to mechanical polishing or more delicate chemical and mechanical polishing. The deposition temperature was 750-850 deg. C. In the photoluminescence spectra of the samples with the substrates polished chemically and mechanically, two lines, D{sub 1} and D{sub 2}, corresponding to the dislocation-related emission are recorded. Generation of dislocations in the substrates is caused by efficient adhesion of the diamond film and, as a result, by internal stresses that relax with the formation of dislocations. The experimental spectra are practically identical to the photoluminescence spectra observed in silicon ({rho} {approx} 100 {Omega} cm) with the density of dislocations {approx}10{sup 4} cm{sup -2}.

36 MATERIALS SCIENCE↗

Investigation of the influence of electron irradiation on the properties of cobalt nanotubes

Cobalt nanotubes have been synthesized by electrochemical deposition in pores of ion track membranes. The structures obtained have been studied by scanning electron microscopy, energy-dispersive spectroscopy, X-ray diffraction analysis, and gas permeability method. The influence of electron irradiation on the cobalt nanotube structure has been investigated. It is shown that an increase in the irradiation dose leads to the transformation of the sample crystal structure. This fact can be explained by the simultaneous reduction of the β-Co metastable phase and relaxation of the microstress formed by the fcc phase in the lattice. The degree of sample texturing along the [100] direction increases under electron irradiation. The dependences of the resistive and magnetic properties of cobalt nanotubes on the irradiation dose have been analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗