Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scientific Programming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Preliminary assessment of rover power systems for the Mars Rover Sample Return Mission

Four isotope power system concepts were presented and compared on a common basis for application to on-board electrical prime power for an autonomous planetary rover vehicle. A representative design point corresponding to the Mars Rover Sample Return (MRSR) preliminary mission requirements (500 W) was selected for comparison purposes. All systems concepts utilize the General Purpose Heat Source (GPHS) isotope heat source developed by DOE. Two of the concepts employ thermoelectric (TE) conversion: one using the GPHS Radioisotope Thermoelectric Generator (RTG) used as a reference case, the other using an advanced RTG with improved thermoelectric materials. The other two concepts employed are dynamic isotope power systems (DIPS): one using a closed Brayton cycle (CBC) turboalternator, and the other using a free piston Stirling cycle engine/linear alternator (FPSE) with integrated heat source/heater head. Near term technology levels have been assumed for concept characterization using component technology figure-of-merit values taken from the published literature. For example, the CBC characterization draws from the historical test database accumulated from space Brayton cycle subsystems and components from the NASA B engine through the mini-Brayton rotating unit. TE system performance is estimated from Voyager/multihundred Watt (MHW)-RTG flight experience through Mod-RTG performance estimates considering recent advances in TE materials under the DOD/DOE/NASA SP-100 and NASA Committee on Scientific and Technological Information programs. The Stirling DIPS system is characterized from scaled-down Space Power Demonstrator Engine (SPDE) data using the GPHS directly incorporated into the heater head. The characterization/comparison results presented here differ from previous comparison of isotope power (made for Low Earth Orbit (LEO) applications) because of the elevated background temperature on the Martian surface compared to LEO, and the higher sensitivity of dynamic systems to elevated sink temperature. The mass advantage of dynamic systems is significantly reduced for this application due to Mars' elevated background temperature.

Bents, David J.↗
NASA NTRS1989

Transputer parallel processing at NASA Lewis Research Center

The transputer parallel processing lab at NASA Lewis Research Center (LeRC) consists of 69 processors (transputers) that can be connected into various networks for use in general purpose concurrent processing applications. The main goal of the lab is to develop concurrent scientific and engineering application programs that will take advantage of the computational speed increases available on a parallel processor over the traditional sequential processor. Current research involves the development of basic programming tools. These tools will help standardize program interfaces to specific hardware by providing a set of common libraries for applications programmers. The thrust of the current effort is in developing a set of tools for graphics rendering/animation. The applications programmer currently has two options for on-screen plotting. One option can be used for static graphics displays and the other can be used for animated motion. The option for static display involves the use of 2-D graphics primitives that can be called from within an application program. These routines perform the standard 2-D geometric graphics operations in real-coordinate space as well as allowing multiple windows on a single screen.

Ellis, Graham K.↗
NASA NTRS1989

Preliminary assessment of rover power systems for the Mars Rover Sample Return Mission

Four isotope power system concepts were presented and compared on a common basis for application to on-board electrical prime power for an autonomous planetary rover vehicle. A representative design point corresponding to the Mars Rover Sample Return (MRSR) preliminary mission requirements (500 W) was selected for comparison purposes. All systems concepts utilize the General Purpose Heat Source (GPHS) isotope heat source developed by DOE. Two of the concepts employ thermoelectric (TE) conversion: one using the GPHS Radioisotope Thermoelectric Generator (RTG) used as a reference case, the other using an advanced RTG with improved thermoelectric materials. The other two concepts employed are dynamic isotope power systems (DIPS): one using a closed Brayton cycle (CBC) turboalternator, and the other using a free piston Stirling cycle engine/linear alternator (FPSE) with integrated heat source/heater head. Near-term technology levels have been assumed for concept characterization using component technology figure-of-merit values taken from the published literature. For example, the CBC characterization draws from the historical test database accumulated from space Brayton cycle subsystems and components from the NASA B engine through the mini-Brayton rotating unit. TE system performance is estimated from Voyager/multihundred Watt (MHW)-RTG flight experience through Mod-RTG performance estimates considering recent advances in TE materials under the DOD/DOE/NASA SP-100 and NASA Committee on Scientific and Technological Information programs. The Stirling DIPS system is characterized from scaled-down Space Power Demonstrator Engine (SPDE) data using the GPHS directly incorporated into the heater head. The characterization/comparison results presented here differ from previous comparison of isotope power (made for LEO applications) because of the elevated background temperature on the Martian surface compared to LEO, and the higher sensitivity of dynamic systems to elevated s

Bents, D. J.↗
NASA NTRS1990

National Space Transportation System (NSTS) technology needs

The National Space Transportation System (NSTS) is one of the Nation's most valuable resources, providing manned transportation to and from space in support of payloads and scientific research. The NSTS program is currently faced with the problem of hardware obsolescence, which could result in unacceptable schedule and cost impacts to the flight program. Obsolescence problems occur because certain components are no longer being manufactured or repair turnaround time is excessive. In order to achieve a long-term, reliable transportation system that can support manned access to space through 2010 and beyond, NASA must develop a strategic plan for a phased implementation of enhancements which will satisfy this long-term goal. The NSTS program has initiated the Assured Shuttle Availability (ASA) project with the following objectives: eliminate hardware obsolescence in critical areas, increase reliability and safety of the vehicle, decrease operational costs and turnaround time, and improve operational capability. The strategy for ASA will be to first meet the mandatory needs - keep the Shuttle flying. Non-mandatory changes that will improve operational capability and enhance performance will then be considered if funding is adequate. Upgrade packages should be developed to install within designated inspection periods, grouped in a systematic approach to reduce cost and schedule impacts, and allow the capability to provide a Block 2 Shuttle (Phase 3).

Winterhalter, David L.↗
NASA NTRS1991

The transition of ground-based space environmental effects testing to the space environment

The goal of the space flight program at the Center for Commercial Development of Space (CCDS)--Materials for Space Structures is to provide environmentally stable structural materials to support the continued humanization and commercialization of the space frontier. Information on environmental stability will be obtained through space exposure, evaluation, documentation, and subsequent return to the supplier of the candidate material for internal investigation. This program provides engineering and scientific service to space systems development firms and also exposes CCDS development candidate materials to space environments representative of in-flight conditions. The maintenance of a technological edge in space for NASA suggests the immediate search for space materials that maintain their structural integrity and remain environmentally stable. The materials being considered for long-lived space structures are complex, high strength/weight ratio composites. In order for these new candidate materials to qualify for use in space structures, they must undergo strenuous testing to determine their reliability and stability when subjected to the space environment. Ultraviolet radiation, atomic oxygen, debris/micrometeoroids, charged particles radiation, and thermal fatigue all influence the design of space structural materials. The investigation of these environmental interactions is the key purpose of this center. Some of the topics discussed with respect to the above information include: the Space Transportation System, mission planning, spaceborne experiments, and space flight payloads.

Zaat, Stephen V.↗
NASA NTRS1990

Overview of the potential instrument payload for the EOS system

The Earth Observing System (EOS) is a key element of the U.S. Program in Global Change. It is NASA's initiative to provide the scientific means to observe the earth as a system. The EOS satellite system and accompanying Data and Information System (DIS) provide spacebased platforms and groundbased elements for scientific research and information extraction. The program recognizes the need for global coverage, long term observations, and multidisciplinary analyses in order to detect subtle changes in the environment's state. A multidisciplinary payload of active and passive sensors is proposed to accomplish the objectives of the program. International partners are an important element of the program. This paper focuses on the instrument complement for the EOS-A spacecraft since those decisions will occur this year. Significant programmatic constraints and program science decisions will impact the selection of the EOS-A payload.

Thompson, Leslie L.↗
NASA NTRS1991

SAMPEX

The DSN (Deep Space Network) mission support requirements for SAMPEX are summarized. SAMPEX is the first mission of the GSFC Small Explorer Satellite program (SMEX). Its primary scientific objectives are to measure the elemental and isotopic composition of solar energetic particles, anomalous cosmic rays, and galactic cosmic rays over the energy range from approximately one to several hundred MeV per nucleon. The SAMPEX mission objectives are outlined and the DSN support requirements are defined through the presentation of tables and narratives describing the spacecraft flight profile; DSN support coverage; frequency assignments; support parameters for telemetry, command and support systems; and tracking support responsibility.

Catena, J.↗
NASA NTRS1991

Quo vadimus? The 21st Century and multimedia

The concept is related of computer driven multimedia to the NASA Scientific and Technical Information Program (STIP). Multimedia is defined here as computer integration and output of text, animation, audio, video, and graphics. Multimedia is the stage of computer based information that allows access to experience. The concepts are also drawn in of hypermedia, intermedia, interactive multimedia, hypertext, imaging, cyberspace, and virtual reality. Examples of these technology developments are given for NASA, private industry, and academia. Examples of concurrent technology developments and implementations are given to show how these technologies, along with multimedia, have put us at the threshold of the 21st century. The STI Program sees multimedia as an opportunity for revolutionizing the way STI is managed.

Kuhn, Allan D.↗
NASA NTRS1990

Proposal for constructing an advanced software tool for planetary atmospheric modeling

Scientific model building can be a time intensive and painstaking process, often involving the development of large and complex computer programs. Despite the effort involved, scientific models cannot easily be distributed and shared with other scientists. In general, implemented scientific models are complex, idiosyncratic, and difficult for anyone but the original scientist/programmer to understand. We believe that advanced software techniques can facilitate both the model building and model sharing process. We propose to construct a scientific modeling software tool that serves as an aid to the scientist in developing and using models. The proposed tool will include an interactive intelligent graphical interface and a high level, domain specific, modeling language. As a testbed for this research, we propose development of a software prototype in the domain of planetary atmospheric modeling.

Keller, Richard M.↗
NASA NTRS1992

The flow of plasma in the solar terrestrial environment

The scientific goals of the program are outlined, and some of the papers submitted for publication within the last six months are briefly highlighted. Some of the topics covered include ionosphere-magnetosphere coupling, polar cap arcs, polar wind, convection vortices, ionosphere-plasmasphere coupling, and the validity of macroscopic plasma flow models.

Schunk, R. W.↗
NASA NTRS1990

Coordinating Council. Second Meeting: International Acquisitions

The theme of this NASA Scientific and Technical Information Program Coordinating Council was International Acquisitions. Included are both visuals for presentations and reports on discussions related to the topics. Presentations were made on the following topics: Coordination council organization international plan, STI global network, International aerospace climate, Foreign exchange program, Foreign activities RMS & AIAA, NASA translation program, A.F. machine translation system, and CIRC cooperation.

Source record↗
NASA NTRS1991

Coordinating Council. Fifth Meeting: Quality

This NASA Scientific and Technical Information Program Coordinating Council meeting had a theme of Quality. Four presentations were made with the following titles: How much quality can you pay for?, What the Center for AeroSpace Information has done to improve quality, Quality from the user standpoint, and Database quality: user views test producer perception. Visuals as well as discussion summaries are also included.

Source record↗
NASA NTRS1992

Coordinating Council. Seventh Meeting: Acquisitions

The theme for this NASA Scientific and Technical Information Program Coordinating Council meeting was Acquisitions. In addition to NASA and the NASA Center for AeroSpace Information (CASI) presentations, the report contains fairly lengthy visuals about acquisitions at the Defense Technical Information Center. CASI's acquisitions program and CASI's proactive acquisitions activity were described. There was a presentation on the document evaluation process at CASI. A talk about open literature scope and coverage at the American Institute of Aeronautics and Astronautics was also given. An overview of the STI Program's Acquisitions Experts Committee was given next. Finally acquisitions initiatives of the NASA STI program were presented.

Source record↗
NASA NTRS1990

Coordinating Council. Third Meeting: STI Strategic Plans

The NASA Scientific and Technical Information Program Coordinating Council conducts meetings after which both modified transcripts of presentations and interactive discussions are published. The theme for the November 1990 meeting was 'STI Strategic Plans'. This theme was the focus of recorded discussions by members of the council. The last section of the report presents visuals on strategic goals for the STI Information Division. NASA's vision is to be at the forefront of advancements in aeronautics, space science, and exploration. More specific NASA goals are listed followed by the STI Division mission statement. The Strategic Goals for the STI Division are outlined as follows: Implement effective management strategies, Accomplish rapid deployment of the NASA STI Network, Seek out and develop cooperative partnerships, Establish the STI Program as an integral part of the NASA R&D effort, Enhance the quality of our products and services through a focus on the customer, Build an attitude of quality throughout the enterprise, Expand the existing participant community, Assert a NASA leadership role for STI policy, and Develop a program for information science R&D. The STI division mission statement appears on the document cover as follows 'The mission of the NASA STI Program is to advance aerospace knowledge, contribute to U.S. competitiveness, and become an integral partner in NASA R&D programs to support NASA goals.'

Source record↗
NASA NTRS1991

Coordinating Council. Sixth Meeting: Who Are Our Key Users?

This NASA Scientific and Technical Information Program Coordinating Council meeting deals with the topic 'Who are our key users?' Presentations were made on the following subtopics: Key users: Who uses the system the most, Who orders the most documents, Users: What do we know about them?, NASA/DOD Aerospace Knowledge Diffusion research project on 'Potential key users', How we meet the user's needs, and STI Council user requirements update. Summaries of discussions after the presentations are included along with visuals for the presentations.

Source record↗
NASA NTRS1992

Coordinating Council. Eighth Meeting: Using the Internet

This NASA Scientific and Technical Information Program Coordinating Council meeting theme was entitled 'Using Internet'. Individual topics included STI LAN migration, NSF and NREN (National Science Foundation and the National Research and Education Network), and the New NASA Headquarters LAN. Discussions are recorded for each topic and visuals are provided for STI LAN migration and NSI - NASA Science Internet.

Source record↗
NASA NTRS1993

NASA access mechanism: Graphical user interface information retrieval system

Access to online information sources of aerospace, scientific, and engineering data, a mission focus for NASA's Scientific and Technical Information Program, has always been limited to factors such as telecommunications, query language syntax, lack of standardization in the information, and the lack of adequate tools to assist in searching. Today, the NASA STI Program's NASA Access Mechanism (NAM) prototype offers a solution to these problems by providing the user with a set of tools that provide a graphical interface to remote, heterogeneous, and distributed information in a manner adaptable to both casual and expert users. Additionally, the NAM provides access to many Internet-based services such as Electronic Mail, the Wide Area Information Servers system, Peer Locating tools, and electronic bulletin boards.

Hunter, Judy↗
NASA NTRS1992

Construction of an advanced software tool for planetary atmospheric modeling

Scientific model-building can be a time intensive and painstaking process, often involving the development of large complex computer programs. Despite the effort involved, scientific models cannot be distributed easily and shared with other scientists. In general, implemented scientific models are complicated, idiosyncratic, and difficult for anyone but the original scientist/programmer to understand. We propose to construct a scientific modeling software tool that serves as an aid to the scientist in developing, using and sharing models. The proposed tool will include an interactive intelligent graphical interface and a high-level domain-specific modeling language. As a test bed for this research, we propose to develop a software prototype in the domain of planetary atmospheric modeling.

Friedland, Peter↗