Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shape selectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Formation of resonances and anionic fragments upon electron attachment to benzaldehyde

Benzaldehyde is a simple aromatic aldehyde and has a wide range of applications in the food, pharmaceutical, and chemical industries. The positive electron affinity of this compound suggests that low-energy electrons can be easily trapped by neutral benzaldehyde. In the present study, we investigated the formation of negative ions following electron attachment to benzaldehyde in the gas-phase. Calculations on elastic electron scattering from benzaldehyde indicate a π* valence bound state of the anion at -0.48 eV and three π* shape resonances (0.78, 2.48 and 5.51 eV). The excited state spectrum of the neutral benzaldehyde is also reported to complement our findings. Using mass spectrometry, we observed the formation of the intact anionic benzaldehyde at ~0 eV. We ascribe the detection of the benzaldehyde anion to stabilization of the π* valence bound state upon dissociative electron attachment to a benzaldehyde dimer. In addition, we report the cross sections for nine fragment anions formed through electron attachment to benzaldehyde. Investigations carried out with partially deuterated benzaldehyde show that the hydrogen loss is site-selective with respect to the incident electron energy. In addition, we propose several dissociation pathways, backed up by quantum chemical calculations on their thermodynamic thresholds. The threshold calculations also support that the resonances formed at higher energies lead to fragment anions observable by mass spectrometry, whereas the resonances at low electron energies decay only by electron autodetachment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Clustering of CODEX clusters

The clustering of galaxy clusters links the spatial nonuniformity of dark matter halos to the growth of the primordial spectrum of perturbations. The amplitude of the clustering signal is widely used to estimate the halo mass of astrophysical objects. The advent of cluster mass calibrations enables using clustering in cosmological studies. Aims. We analyze the autocorrelation function of a large contiguous sample of galaxy clusters, the Constrain Dark Energy with X-ray (CODEX) sample, in which we take particular care of cluster definition. These clusters were X-ray selected using the ROentgen SATellite All-Sky Survey and then identified as galaxy clusters using the code redMaPPer run on the photometry of the Sloan Digital Sky Survey. We develop methods for precisely accounting for the sample selection effects on the clustering and demonstrate their robustness using numerical simulations. Methods. Using the clean CODEX sample, which was obtained by applying a redshift-dependent richness selection, we computed the two-point autocorrelation function of galaxy clusters in the 0.1 < z < 0.3 and 0.3 < z < 0.5 redshift bins. We compared the bias in the measured correlation function with values obtained in numerical simulations using a similar cluster mass range. Results. By fitting a power law, we measured a correlation length r 0 = 18.7 ± 1.1 and slope γ = 1.98 ± 0.14 for the correlation function in the full redshift range. By fixing the other cosmological parameters to their nine-year Wilkinson Microwave Anisotropy Probe values, we reproduced the observed shape of the correlation function under the following cosmological conditions: Ω m0 = $0.22_{-0.03}^{+0.04}$ and S 8 = σ 8 (Ω m0 /0.3)0.5 = $0.85_{-0.08}^{+0.10}$ with estimated additional systematic errors of σ Ω m0 = 0.02 and σS 8 = 0.20. We illustrate the complementarity of clustering constraints by combining them with CODEX cosmological constraints based on the X-ray luminosity function, deriving Ωm = 0.25 ± 0.01 and σ 8 = $0.81_{-0.02}^{+0.01}$ with an estimated additional systematic error of σ Ω m0 = 0.07 and σ σ8 = 0.04. The mass calibration and statistical quality of the mass tracers are the dominant source of uncertainty.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Unusual dynamic susceptibility arising from soft ferromagnetic domains in MnBi 8 Te 13 and Sb-doped MnBi 2n Te 3n+1 (n = 2, 3)

MnBi$_{2n}$Te$_{3n+1}$ (MBT) is the first intrinsic magnetic topological insulator and is promising to host emergent phenomena such as quantum anomalous Hall effect. They can be made ferromagnetic by having n ≥ 4 or with Sb doping. In this work, we studied the magnetic dynamics in a few selected ferromagnetic (FM) MBT compounds, including MnBi 8 Te 13 and Sb doped MnBi$_{2n}$Te$_{3n+1}$ ($n = 2, 3)$ using AC susceptibility and magneto-optical imaging. Slow relaxation behavior is observed in all three compounds, suggesting its universality among FM MBT. We attribute the origin of the relaxation behavior to the irreversible domain movements since they only appear below the saturation fields when ferromagnetic domains form. The very soft ferromagnetic domain nature is revealed by the low-field fine-structured domains and high-field sea-urchin-shaped remanent-state domains imaged via our magneto-optical measurements. Finally, we ascribe the rare 'double-peak' behavior observed in the AC susceptibility under small DC bias fields to the very soft ferromagnetic domain formations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Search for new physics in final states with semivisible jets or anomalous signatures using the ATLAS detector

A search is presented for hadronic signatures of beyond the Standard Model (BSM) physics, with an emphasis on signatures of a strongly coupled hidden dark sector accessed via resonant production of a 𝑍′ mediator. The ATLAS experiment dataset collected at the Large Hadron Collider from 2015 to 2018 is used, consisting of proton-proton collisions at $\sqrt{𝑠}$ = 13 TeV and corresponding to an integrated luminosity of 140 fb −1 . The 𝑍′ mediator is considered to decay to two dark quarks, which each hadronize and decay to showers containing both dark and Standard Model particles, producing a topology of interacting and noninteracting particles within a jet known as “semivisible.” Machine learning methods are used to select these dark showers and reject the dominant background of mismeasured multijet events, including an anomaly detection approach to preserve broad sensitivity to a variety of BSM topologies. A resonance search is performed by fitting the transverse mass spectrum based on a functional form background estimation. No significant excess over the expected background is observed. Results are presented as limits on the production cross section of semivisible jet signals, parametrized by the fraction of invisible particles in the decay and the 𝑍′ mass, and by quantifying the significance of any generic Gaussian-shaped mass peak in the anomaly region.

particle dark matter↗
DOE OSTI2022

Nitinol Electroslag Remelting: Initial Slag Study

Nitinol’s unique shape memory and super-elastic properties make it attractive for many applications in biomedical, automotive, aerospace, industrial refrigeration, and waste heat reclamation industries. The fatigue performance is limited however, by non-metallic inclusions (NMI) formed during the traditional VIM/VAR or multi-VAR process. ESR is a potential alternative melt process and is commonly used to refine ingot chemistry and enhance the metallurgical structure of many superalloys and specialty steels, but no study on ESR of Nitinol has been reported to date. The key to establishing a successful ESR process is selecting a compatible slag. In this study, several different slag chemistries are evaluated for their compatibility with Nitinol. One slag chemistry is chosen, along with a control, to produce four Nitinol ESR ingots. Pursuit of a novel slag chemistry for adequate Nitinol refinement is discussed.

Fezi, Kyle↗
DOE OSTI2023

Powerful Radio Sources in the Southern Sky. I. Optical Identifications

Since the early sixties, our view of radio galaxies and quasars has been drastically shaped by discoveries made thanks to observations of radio sources listed in the Third Cambridge Catalog and its revised version (3CR). However, the largest fraction of data collected to date on 3CR sources was performed with relatively old instruments, rarely repeated and/or updated. Importantly, the 3CR contains only objects located in the Northern Hemisphere, thus having limited access to new and innovative astronomical facilities. To mitigate these limitations, we present a new catalog of powerful radio sources visible from the Southern Hemisphere, extracted from the GLEAM 4 Jy (G4Jy) catalog and based on equivalent selection criteria as the 3CR. This new catalog, named G4Jy-3CRE, where the E stands for “equivalent,” lists a total of 264 sources at decl. below -5° and with 9 Jy limiting sensitivity at ~178 MHz. We explored archival radio maps obtained with different surveys and compared them with optical images available in the Pan-STARRS, DES, and DSS databases to search for optical counterparts of their radio cores. We compared mid-infrared counterparts, originally associated in the G4Jy, with the optical ones identified here, and we present results of a vast literature search carried out to collect redshift estimates for all G4Jy-3CRE sources resulting in a total of 145 reliable z measurements.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Visualizing Size-Dependent Dynamics of CeO 2-δ {100}-Supported CoO x Nanoparticles Under CO 2 Hydrogenation Conditions

Carbon dioxide is a major greenhouse gas. In order to optimize processes focused on its chemical valorization, one needs detailed information about the effects of CO 2 and/or CO 2 /H 2 mixtures on the structure and morphology of metal/oxide catalysts. Here, in this study, the evolution of a catalyst with cobalt supported on CeO 2 -cube nanostructures under CO 2 hydrogenation conditions was investigated by using a set of in situ characterization techniques (X-ray absorption fine structure, X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, and environmental transmission electron microscopy (TEM)). The {100} facets of the ceria support displayed an unexpectedly high stability due to strong interactions with the aggregates of cobalt oxide. A significant influence of interfacial bonding between CoO x and CeO 2-δ {100} is evident through a clear preference in the orientation of CoO x nanoparticles (NPs) with respect to the substrate. For initially reduced Co/CeO 2 -cube nanostructures, a kinetically controlled oxidation of cobalt upon the introduction of CO 2 was observed during the early stages of CO 2 hydrogenation. Environmental TEM revealed the size-dependent morphological behavior of cobalt oxide NPs due to strong interactions with the CeO 2 {100} surface. When the environment was switched from H 2 to a mixture of H 2 and CO 2 at 250 °C, small CoO x NPs (in the largest dimension < 2.5 nm) rapidly transformed from a pyramidal three-dimensional (3D) form to a planar, monatomic layer attached to the concurrently oxidized CeO 2-δ {100} surface. This maximizes the number of sites available for the binding of CO 2 or reaction intermediates. The shape transformation reflected the oxophilic character of cobalt and strong metal–support interactions. The removal of CO 2 from the gas phase led to a reduction of the cobalt oxide NPs by hydrogen and a reversible two-dimensional → 3D transformation. In contrast, no significant morphological changes, apart from further oxidation, were observed for big CoO x NPs (in the largest dimension > 3 nm). These trends are not seen for nanoparticles of noble metals. The observed morphological and structural changes in the small CoO x NPs affected the stability of reaction intermediates and modified the selectivity of the CoO x /CeO 2 catalyst system for methane production.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Invariant-mass spectroscopy in projectile fragmentation reactions

The fragmentation of a projectile into a number of pieces can lead to the creation of many resonances in different nuclei. We discuss application of the invariant-mass method to the products from such reactions to find some of the most exotic resonances located furthest beyond the proton drip line. We show examples from fragmentation of a fast 13 O beam including the production of the newly identified 9 N resonance. In extracting resonance parameters from invariant-mass spectra, accurate estimates of the background from nonresonant prompt protons are needed. These prompt protons are correlated with the resonances due to long-range Coulomb interactions and will suppress events when resonance decay products and the prompt protons have small invariant masses. The shape of this background is especially important in determining the widths of wide resonances typically found at the edge of the chart of nuclides. An event-mixing recipe is proposed to describe this background, where the mixed events have reduced weighting for the smaller invariant masses to account for the effect of the Coulomb final-state interactions. The weighting is based on the measured correlations of heavier hydrogen isotopes with the resonances or the projectile residues. We also show that the relative magnitude of the background can be reduced in some cases by selecting events where the resonance decay products are accompanied by a deuteron or triton cluster. Here, the deuteron and triton clusters are largely not products of resonant decay and thus events with an accompanying cluster are associated with fewer background protons than events without them. The width of the 5/2¯ state in 9 C with the new background prescription was found to be consistent with the value obtained using proton elastic scattering on 8 B. Improved values for the widths of 10 C, 10,11 N, and 12 O resonances were also obtained using the new background prescription.

6 ≤ A ≤ 19↗
DOE OSTI2023

Direct Ink-Write Printing of Ceramic Clay with an Embedded Wireless Temperature and Relative Humidity Sensor

This research presents a simple method to additively manufacture Cone 5 porcelain clay ceramics by using the direct ink-write (DIW) printing technique. DIW has allowed the application of extruding highly viscous ceramic materials with relatively high-quality and good mechanical properties, which additionally allows a freedom of design and the capability of manufacturing complex geometrical shapes. Clay particles were mixed with deionized (DI) water at different ratios, where the most suitable composition for 3D printing was observed at a 1:5 w/c ratio (16.2 wt.%. of DI water). Differential geometrical designs were printed to demonstrate the printing capabilities of the paste. In addition, a clay structure was fabricated with an embedded wireless temperature and relative humidity (RH) sensor during the 3D printing process. The embedded sensor read up to 65% RH and temperatures of up to 85 °F from a maximum distance of 141.7 m. The structural integrity of the selected 3D printed geometries was confirmed through the compressive strength of fired and non-fired clay samples, with strengths of 70 MPa and 90 MPa, respectively. This research demonstrates the feasibility of using the DIW printing of porcelain clay with embedded sensors, with fully functional temperature- and humidity-sensing capabilities.

42 ENGINEERING↗
DOE OSTI2026

A LASER POWDER BED FUSION ADDITIVE MANUFACTURING CHARACTERIZATION APPROACH AND DATASET HIGHLIGHTING IMPLICATIONS FOR CROSS-PLATFORM PERFORMANCE CONSISTENCY

Additive Manufacturing (AM) has remained a rapidly growing technology over the past decade, which affords many benefits. However, there is one main hinderance to widespread adoption: Products produced on one Laser Powder Bed Fusion (LPBF) AM system can vary in mechanical performance from those produced on another system. This is due to the fact that while LPBF AM system is producing a product’s shape, it is also producing the product’s material. Due to the complex and dynamic nature of LPBF, items fabricated on one system can be different in terms of dimensions, microstructure and quality compared to items fabricated on a different make or model system. This lack of cross-platform performance consistency makes widespread adoption challenging. This work was created to help understand the variation between different Laser Powder Bed Fusion (LPBF) Additive Manufacturing (AM) systems across different manufacturers, models, and users, and to provide insight into how to ensure product consistency regardless of system selection.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Microbial and Environmental Processes Shape the Link between Organic Matter Functional Traits and Composition

Dissolved organic matter (DOM) is a large and complex mixture of molecules that fuels biogeochemical reaction in virtually all ecosystems on Earth. However, the relative importance of deterministic and stochastic processes in structuring DOM composition remains poorly characterized. Here we develop a framework for partitioning molecular composition based on key molecular traits, including lability vs. recalcitrance and activity vs. inactivity. Within this framework, we examine the ecological processes governing the assembly of DOM fractions by deploying aquatic microcosms on mountainsides that span gradients of temperature and nutrient loading in subtropical and subarctic ecosystems. Across study regions, deterministic and stochastic processes primarily structure active and inactive fractions, respectively. However, recalcitrant molecules are more deterministically assembled than labile molecules in the inactive fraction. Deterministic processes leading to variable selection generally exhibit more variation across the energy supply gradient for inactive fractions, and their importance increases with energy supply for recalcitrant molecules in both active and inactive fractions. Together, our results indicate that active and inactive fractions of DOM assemblages are structured by contrasting ecological processes, and their recalcitrant components are sensitive to global change. In conclusion, our framework opens new avenues to understand the assembly and turnover of DOM in a changing world, which can be used to predict carbon cycling at local to global scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Recent and future developments in pultrusion technology with consideration for curved geometries: A review

Herein this paper examined the current state and future developments in pultrusion with particular emphasis on its application in curved part manufacturing. The relationship between factors such as resin chemistry, fiber characteristics, and die geometry that influences the properties of pultruded product were highlighted. Moreover, the specific challenges associated with pultruding curved parts such as the complexities in achieving uniformity and structural integrity in such geometries were discussed. The review emphasized mold design, process improvement, adaptive control systems for precise resin impregnation and material selection to address these challenges. Additionally, the paper suggests the integration of real-time monitoring and data analytics as ways to enhance quality control during curved parts pultrusion. These advancements will help to overcome challenges specific to curved pultrusion and make the process more efficient. Other manufacturing techniques such as filament winding, thermoforming, pulforming were mentioned as alternatives to curved parts pultrusion. The review also explores pultruded variable curvature processes, highlighting some notable patents and article related to this subject matter. Production of pultruded variable curvature parts was seen as a key driver that can shape the future of pultrusion. Finally, the paper anticipates future trends, with sustainability, customization, integration of advanced materials, and development of techniques for pultrusion of composites parts.

42 ENGINEERING↗
DOE OSTI2023

Geology and elevation shape bacterial assembly in Antarctic endolithic communities

Ice free areas of continental Antarctica are among the coldest and driest environments on Earth, and yet, they support surprisingly diverse and highly adapted microbial communities. Endolithic growth is one of the key adaptations to such extreme environments and often represents the dominant life-form. Despite growing scientific interest, little is known of the mechanisms that influence the assembly of endolithic microbiomes across these harsh environments. Here, we used metagenomics to examine the diversity and assembly of endolithic bacterial communities across Antarctica within different rock types and over a large elevation range. While granite supported richer and more heterogeneous communities than sandstone, elevation had no apparent effect on taxonomic richness, regardless of rock type. Conversely, elevation was clearly associated with turnover in community composition, with the deterministic process of variable selection driving microbial assembly along the elevation gradient. The turnover associated with elevation was modulated by geology, whereby for a given elevation difference, turnover was consistently larger between communities inhabiting different rock types. Overall, selection imposed by elevation and geology appeared stronger than turnover related to other spatially-structured environmental drivers. Our findings indicate that at the cold-arid limit of life on Earth, geology and elevation are key determinants of endolithic bacterial heterogeneity. This also suggests that warming temperatures may threaten the persistence of such extreme-adapted organisms.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

In situ visualisation of zeolite anisotropic framework flexibility during catalysis

Zeolites exhibit framework flexibility driving their chemical and catalytic properties. Since the zeolitic pores are extremely small, a slight strain generated in the crystal induces compelling changes in shape, connectivity, accessibility, and the framework chemical properties. These modifications affected the adsorption and desorption of reactants/products and the diffusion within the channels during reaction. Using in situ 3D Bragg coherent X-ray diffraction imaging, we unveil the dynamics of the zeolite structure during catalysis, contraction and/or expansion of its framework also known as zeolite framework flexibility. Here, we imaged three-dimensionally a single faujasite zeolite crystal during the ethanol dehydration reaction revealing anisotropic lattice dynamics simultaneously to guest molecules formation. Understanding zeolite flexibility could permit to tune zeolites properties towards potentially higher adsorption and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploring single-cell biosynthetic noise and dynamics for enhanced betaxanthin production in Escherichia coli

Cell-to-cell variability often limits the efficiency of microbial bioproduction, yet how individual cells fluctuate over time and how these fluctuations shape population-level output remain unclear. To address this issue, we tracked a heterologous betaxanthin pathway in Escherichia coli using microfluidics-assisted time-lapse microscopy, allowing simultaneous measurement of fluctuations in betaxanthin, its biosynthetic enzyme DOD and growth across generations. Here we show that over 50% of high betaxanthin producers become medium or low producers after two divisions. Betaxanthin variation primarily originates from DOD noise, with a smaller contribution from growth rate fluctuations. We further develop a stochastic model to explore various control circuits and find that pathway enzyme or metabolite-based growth selection strategies are most effective in enhancing production. We experimentally validate the model by coupling enzyme expression to nutrient availability, which enriches high producers and boosts titer by 4.4-fold. Our results highlight key sources of metabolic heterogeneity and provide a framework for designing robust microbial processes.

Bacterial systems biology↗
DOE OSTI2023

Novel Co 5 Cluster Based Triazole Bridged Cobalt-Fluorophosphate: Synthesis, Structure, Magnetic and Heterogeneous Catalytic Epoxidation Studies

A novel triazole bridged cobalt fluorophosphate coordination polymer with the formula {Co 5 (1,2,4-triazole) 2 (OH) 2 (PO 3 F) 4 } n has been synthesized. Single crystal X-ray studies reveal that the compound comprises of Co 5 clusters which ultimately build the whole framework, here all cobalt centers are in octahedral geometry established from continuous shape analysis. All the cobalt centers are in Co(II) oxidation state and the results are supported by the bond valence sum (BVS) calculation. The sample has been characterized by single crystal X-ray, powder X-ray, FTIR and TGA analysis. The compound was tested for olefin catalysis performance and magnetism. Magnetization measurements reveal overall antiferromagnetic interactions among the Co(II) ions. The compound is very active in the catalytic transformation of olefins to their corresponding epoxides. In conclusion, catalytic epoxidation studies reveal that cyclohexene and styrene can be converted up to 97% with almost 65% selectivity of products with higher TON numbers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Photometric redshift uncertainties in weak gravitational lensing shear analysis: models and marginalization

ABSTRACT Recovering credible cosmological parameter constraints in a weak lensing shear analysis requires an accurate model that can be used to marginalize over nuisance parameters describing potential sources of systematic uncertainty, such as the uncertainties on the sample redshift distribution n(z). Due to the challenge of running Markov chain Monte Carlo (MCMC) in the high-dimensional parameter spaces in which the n(z) uncertainties may be parametrized, it is common practice to simplify the n(z) parametrization or combine MCMC chains that each have a fixed n(z) resampled from the n(z) uncertainties. In this work, we propose a statistically principled Bayesian resampling approach for marginalizing over the n(z) uncertainty using multiple MCMC chains. We self-consistently compare the new method to existing ones from the literature in the context of a forecasted cosmic shear analysis for the HSC three-year shape catalogue, and find that these methods recover statistically consistent error bars for the cosmological parameter constraints for predicted HSC three-year analysis, implying that using the most computationally efficient of the approaches is appropriate. However, we find that for data sets with the constraining power of the full HSC survey data set (and, by implication, those upcoming surveys with even tighter constraints), the choice of method for marginalizing over n(z) uncertainty among the several methods from the literature may modify the 1σ uncertainties on Ωm–S8 constraints by ∼4 per cent, and a careful model selection is needed to ensure credible parameter intervals.

Zhang, Tianqing (ORCID:000000025596198X)↗