Search NASA⌕ Search

SEARCH · Search NASA

Results for “Signal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

AI ensemble for signal detection of higher order gravitational wave modes of quasi-circular, spinning, non-precessing binary black hole mergers

We introduce spatiotemporal-graph models that concurrently process data from the twin advanced LIGO detectors and the advanced Virgo detector. We trained these AI classifiers with 2.4 million IMRPhenomXPHM waveforms that describe quasi-circular, spinning, non-precessing binary black hole mergers with component masses m{1,2}∈[3M⊙,50M⊙], and individual spins sz{1,2}∈[−0.9,0.9]; and which include the (ℓ,|m|)={(2,2),(2,1),(3,3),(3,2),(4,4)} modes, and mode mixing effects in the ℓ=3,|m|=2 harmonics. We trained these AI classifiers within 22 hours using distributed training over 96 NVIDIA V100 GPUs in the Summit supercomputer. We then used transfer learning to create AI predictors that estimate the total mass of potential binary black holes identified by all AI classifiers in the ensemble. We used this ensemble, 3 classifiers for signal detection and 2 total mass predictors, to process a year-long test set in which we injected 300,000 signals. This year-long test set was processed within 5.19 minutes using 1024 NVIDIA A100 GPUs in the Polaris supercomputer (for AI inference) and 128 CPU nodes in the ThetaKNL supercomputer (for post-processing of noise triggers), housed at the Argonne Leadership Computing Facility. These studies indicate that our AI ensemble provides state-of-the-art signal detection accuracy, and reports 2 misclassifications for every year of searched data. This is the first AI ensemble designed to search for and find higher order gravitational wave mode signals.

Tian, Minyang↗

Structure of human Frizzled5 by fiducial-assisted cryo-EM supports a heterodimeric mechanism of canonical Wnt signaling

Frizzleds (Fzd) are the primary receptors for Wnt morphogens, which are essential regulators of stem cell biology, yet the structural basis of Wnt signaling through Fzd remains poorly understood. Here we report the structure of an unliganded human Fzd5 determined by single-particle cryo-EM at 3.7 Å resolution, with the aid of an antibody chaperone acting as a fiducial marker. We also analyzed the topology of low-resolution XWnt8/Fzd5 complex particles, which revealed extreme flexibility between the Wnt/Fzd-CRD and the Fzd-TM regions. Analysis of Wnt/β-catenin signaling in response to Wnt3a versus a ‘surrogate agonist’ that cross-links Fzd to LRP6, revealed identical structure-activity relationships. Thus, canonical Wnt/β-catenin signaling appears to be principally reliant on ligand-induced Fzd/LRP6 heterodimerization, versus the allosteric mechanisms seen in structurally analogous class A G protein-coupled receptors, and Smoothened. These findings deepen our mechanistic understanding of Wnt signal transduction, and have implications for harnessing Wnt agonism in regenerative medicine.

59 BASIC BIOLOGICAL SCIENCES↗

Blood pressure reprogramming adapter assists signal recording

Blood pressure reprogramming adapter separates the two components of a blood pressure signal, a dc pressure signal and an ac Korotkoff sounds signal, so that the Korotkoff sounds are recorded on one channel as received while the dc pressure signal is converted to FM and recorded on a second channel.

Vick, H. A.↗

Electronic signal generators: A compilation

Electronic signal generator data based on solid state concepts were simplified or refined to meet requirements, such as reliability, simplicity, fail-safe characteristics, and the capability of withstanding environmental extremes. Pulse generators, high voltage pulse generators, oscillators, analog signal generators, square wave signal generators, and special function signal generators are described.

Source record↗

Phase-lock demodulation of a PM signal contaminated with incidental AM

Signals from phase-modulated satellite transmitters usually exhibit some degree of incidental amplitude modulation. The effects of incidental AM are analyzed when this type of signal is demodulated by a phase-lock receiver which does not employ a limiter preceding the loop phase detector. The presence of incidental AM causes a reduction in the receiver output signal-to-noise ratio. The tolerable level of AM decreases in proportion to the phase modulation index Beta. For a square-wave modulating signal, a 1 db reduction results at the receiver PM channel output when Beta = 1 radian and the percentage of AM = 23, Beta = 1.2 radians and the percentage of AM = 16, or Beta = 1.5 radians and the percentage of AM = 4. Although only the PM channel of the receiver is used ordinarily, utilizing both the AM and PM channel by summing offers an improvement in S/N relative to the S/N ratio of the PM channel if the percentage of incidental AM is greater than fifteen.

Robinson, G. B.↗

Precision signal power measurement

Accurate estimation of signal power is an important Deep Space Network (DSN) consideration. Ultimately, spacecraft power and weight is saved if no reserve transmitter power is needed to compensate for inaccurate measurements. Spectral measurement of the received signal has proved to be an effective method of estimating signal power over a wide dynamic range. Furthermore, on-line spectral measurements provide an important diagnostic tool for examining spacecraft anomalies. Prototype equipment installed at a 64-m-diameter antenna site has been successfully used to make measurements of carrier power and sideband symmetry of telemetry signals received from the Mariner Mars 1971 spacecraft.

Winkelstein, R.↗

Satellite observations of whistler-mode signals in the conjugate region of a 200-kilohertz station.

Study of the signals recorded by a narrow-band (about 200 Hz) receiver at a broadcast station operating at 200 kHz and in the conjugate region of Ashkhabad. The latitude of the station is nearly low enough for propagation of a 200-kHz signal in the ducted whistler mode to the conjugate hemisphere along field lines terminating at the station. In the dawn-dusk orbital plane signals are indeed relatively often observed in the conjugate region, but the source of the signals and their path of propagation is not completely clear. The pattern of observations is consistent with propagation over the long magnetospheric path in field-aligned ducts spread in longitude near 22 deg invariant latitude, but an interpretation involving nonducted propagation is preferred, in which the occasionally high electric-field intensities encountered (greater than 10 microvolts/m) result from focusing effects or from propagation near the resonance angle.

Laaspere, T.↗

Phase shift keyed, pulse code modulated signal synchronizer

Signal is demodulated and synchronized by three loop circuits: ''Q'' loop uses quadrature signal to stabilize frequency; ''B'' loop acts on baseboard signal to stabilize phase; and decoding ''I'' loop acts on in-phase signal. Synchronizer may be used to eliminate false-lock.

Kobayashi, H. S.↗

Amplitude fading of simultaneous transionospheric L-band and VHF signals received at the geomagnetic equator

At Ancon, Peru, simultaneous observations of 1550-MHz and 136-MHz signals from the ATS 5 and Intelsat-1 spacecraft showed ionospheric fading as great as 27 db at 136 MHz and 6 db at 1550 MHZ. The observations were made on 48 days during the 1970 autumnal and 1971 vernal equinox periods. Comparison of the two frequencies, in respect to rates and depths of fades, is made. Statistical distributions of the received signal levels during ionospheric scintillation occurrences are presented which may be of use to communications system engineers with operational requirements in the equatorial regions. The distributions show that during expected periods of scintillation, the L band signal typically falls 1.1 db below the median for 1.0 percent of the time, and the VHF signal falls 11.5 db below the median for 1.0 percent of the time.

Sessions, W. B.↗

Video-signal improvement using comb filtering techniques.

Significant improvement in the signal-to-noise performance of television signals has been obtained through the application of comb filtering techniques. This improvement is achieved by removing the inherent redundancy in the television signal through linear prediction and by utilizing the unique noise-rejection characteristics of the receiver comb filter. Theoretical and experimental results describe the signal-to-noise ratio and picture-quality improvement obtained through the use of baseband comb filters and the implementation of a comb network as the loop filter in a phase-lock-loop demodulator. Attention is given to the fact that noise becomes correlated when processed by the receiver comb filter.

Arndt, G. D.↗

Recursive ideal observer detection of known M-ary signals in multiplicative and additive Gaussian noise.

This paper presents the derivation of the recursive algorithms necessary for real-time digital detection of M-ary known signals that are subject to independent multiplicative and additive Gaussian noises. The motivating application is minimum probability of error detection of digital data-link messages aboard civil aircraft in the earth reflection multipath environment. For each known signal, the detector contains one Kalman filter and one probability computer. The filters estimate the multipath disturbance. The estimates and the received signal drive the probability computers. Outputs of all the computers are compared in amplitude to give the signal decision. The practicality and usefulness of the detector are extensively discussed.

Painter, J. H.↗

Optical Signal Processing: Poisson Image Restoration and Shearing Interferometry

Optical signal processing can be performed in either digital or analog systems. Digital computers and coherent optical systems are discussed as they are used in optical signal processing. Topics include: image restoration; phase-object visualization; image contrast reversal; optical computation; image multiplexing; and fabrication of spatial filters. Digital optical data processing deals with restoration of images degraded by signal-dependent noise. When the input data of an image restoration system are the numbers of photoelectrons received from various areas of a photosensitive surface, the data are Poisson distributed with mean values proportional to the illuminance of the incoherently radiating object and background light. Optical signal processing using coherent optical systems is also discussed. Following a brief review of the pertinent details of Ronchi's diffraction grating interferometer, moire effect, carrier-frequency photography, and achromatic holography, two new shearing interferometers based on them are presented. Both interferometers can produce variable shear.

Hong, Yie-Ming↗

Model reference adaptive control with an augmented error signal

It is shown how globally stable model reference adaptive control systems may be designed when one has access to only the plant's input and output signals. Controllers for single input-single output, nonlinear, nonautonomous plants are developed based on Lyapunov's direct method and the Meyer-Kalman-Yacubovich lemma. Derivatives of the plant output are not required, but are replaced by filtered derivative signals. An augmented error signal replaces the error normally used, which is defined as the difference between the model and plant outputs. However, global stability is assured in the sense that the normally used error signal approaches zero asymptotically.

Monopoli, R. V.↗

Transmitter efficiency considerations in MAPSK signal selection

A simple model of the efficiency-power relationship for a microwave transmitter permits comparison of M-ary amplitude and phase shift keyed (MAPSK) signal array performance on the basis of average DC power in, rather than average RF signal power out. This is of interest in comparing MAPSK arrays with comparable polyphase, since the polyphase transmitter is operated at a single power level, while MAPSK varies over a range of power levels, each of differing efficiency. A constant efficiency-power curve permits comparison of signal arrays in terms of array average power, while a linear curve requires comparison on the basis of array peak power. Since typical efficiency curves will lie between these extremes, the array peak and average power levels provide bounds on array requirements for average DC input power. Examination of the performance of several MAPSK sets reveals a distinct power advantage of quadrature amplitude shift keying (QASK) over most viable signal sets.

Smith, J. G.↗

Graphical derivations of radar, sonar, and communication signals

The designer of a communication system often has knowledge concerning the changes in distance between transmitter and receiver as a function of time. This information can be exploited to reduce multipath interference via proper signal design. A radar or sonar may also have good a priori information about possible target trajectories. Such knowledge can again be used to reduce the receiver's response to clutter (MTI), to enhance signal-to-noise ratio, or to simplify receiver design. There are also situations in which prior knowledge about trajectories is lacking. The system should then utilize a single-filter pair which is insensitive to the effects induced by relative motion between transmitter, receiver, and reflectors. For waveforms with large time-bandwidth products, such as long pulse trains, it is possible to graphically derive signal formats for both situations (trajectory known and unknown). Although the exact form of the signal is sometimes not specified by the graphical procedure, the problem in such cases is reduced to one which has already been solved, i.e., the generation of an impulse equivalent code.

Altes, R. A.↗

Signal design study for shuttle/TDRSS Ku-band uplink

The adequacy of the signal design approach chosen for the TDRSS/orbiter uplink was evaluated. Critical functions and/or components associated with the baseline design were identified, and design alternatives were developed for those areas considered high risk. A detailed set of RF and signal processing performance specifications for the orbiter hardware associated with the TDRSS/orbiter Ku band uplink was analyzed. Performances of a detailed design of the PN despreader, the PSK carrier synchronization loop, and the symbol synchronizer are identified. The performance of the downlink signal by means of computer simulation to obtain a realistic determination of bit error rate degradations was studied. The three channel PM downlink signal was detailed by means of analysis and computer simulation.

Source record↗

Coherence properties of wideband satellite signals caused by ionospheric scintillation

Radio scintillation on satellite signals caused by small-scale irregularities in F-region ionospheric electron density can be an important limitation on earth-satellite communication and navigation systems. Scintillation imposes distortion in both amplitude and phase on wideband signals. In the present work, the shallow-modulated phase screen theory is developed in terms of coherence bandwidth including a model based on a turbulent-like power-law description of the irregularities. The model results usually show a greater coherence bandwidth in the signal phase than in the signal amplitude. Therefore, systems that require phase coherence over a large bandwidth should be less affected than those requiring amplitude coherence.

Rufenach, C. L.↗