Search NASA⌕ Search

SEARCH · Search NASA

Results for “Source Term Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

PICK-UP ION DISTRIBUTIONS AND THEIR INFLUENCE ON ENERGETIC NEUTRAL ATOM SPECTRAL CURVATURE

This paper focuses on the analysis and significance of the spectral curvature of energetic neutral atoms (ENAs) detected by the Interstellar Boundary Explorer. The flux versus energy spectrum is analytically expressed in terms of the source proton distributions, namely: (1) the solar wind kappa distribution of protons and (2) the coexisting filled spherical shell distribution of pick-up ions (PUIs). The influence of PUIs on the spectral index and curvature is modeled and investigated in detail. It is analytically shown that (1) the PUI speed upper limit is restricted by the Earthward PUI velocity vector, (2) the PUI distribution causes a positive spectral curvature, and (3) the exact expressions of the spectral index and curvature can be used to extract information about the governing parameters of the parent proton distributions. The sky maps of the spectral curvature reveal a possible band-like configuration of positive spectral curvature that is missing in the original flux sky maps. This band can be roughly separated into the north/south polar regions and two ecliptic meridional 'columns' located around the ecliptic longitudes {approx}5 Degree-Sign and {approx}150 Degree-Sign . The geometric locus between the two cones with noseward axis, and apertures {approx}60 Degree-Sign and {approx}120 Degree-Sign , configures the band-like region of (1) the positive curvature and (2) the maximum values of PUI distribution. Indeed, the observed curvature band is highly correlated with PUI distributions, and is possibly caused by the influence of PUIs on bending the spectrum from linear (log-log scale) to concave upward, thus increasing its spectral curvature.

79 ASTRONOMY AND ASTROPHYSICS↗

WSF PISA example for SAFER pilot

On October 15, 2021, the Radioactive and Hazardous Waste Management Facility Manager declared a Potential Inadequacy in the Safety Analysis (PISA) due to a new information relating to an error discovered in calculation AB-WSF-20-002. Calculation AB-WSF-20-002 is used to determine source terms and heat release rates for vehicle and aircraft impacts with fuel fires involving TRU waste containers. The source term for an aircraft’s impact has different source terms factors (i.e., DR, ARF, RF, LPF) that are applied to multiple categories of drums impacted in the accident scenario based on the physical stresses of the aircraft impact and involvement in the subsequent fuel pool fire. The source terms of the multiple categories of affected drums are summed to determine the final source term for the accident scenario. Certain categories of affected drums are modeled to lose their lid, causing material to eject and burn unconfined on the ground. For these specific categories, a lower ARF value was incorrectly applied in AB-WSF-20-002 (i.e., an ARF value of 1E-3 was used instead of the DOE-STD-5506-2007 directed ARF value of 1E-2). For these categories, the ARF is applied to a relatively small number of low-activity drums (i.e., 17 drums at 2.9 PE-Ci each) compared to the total number of drums affected (i.e., 166 drums totaling 621.8 PE-Ci). Therefore, this error is not expected to significantly increase final dose for the accident scenario. No immediate actions or compensatory measures are required to maintain the facility in a safe condition.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Comparison and analysis of aircraft measurements and mesoscale atmospheric chemistry model simulations of tropospheric ozone

The Regional Acid Deposition Model (RADM) has been applied to several of the field experiments which were part of the Acid Models Operational and Diagnostic Evaluation Study (Acid MODES). The experiment which was of particular interest with regards to ozone photochemistry involved horizontal zig-zag flight patterns (ZIPPER) over an area from the eastern Ohio River valley to the Adirondacks of New York. Model simulations by both the standard resolution RADM (delta x = 80 km) and the nested grid RADM (delta x = 26.7 km) compare well to measurements in the low emission regions in central Pennsylvania and upstate New York, but underestimate in the high emission upper Ohio River valley. The nested simulation does considerably better, however, than the coarse grid simulation in terms of horizontal pattern and concentration magnitudes. Analysis of NO(x) and HO(x) concentrations and photochemical products rates of ozone show that the model's response to large point source emissions is very unsystematic both spatially and temporally. This is due to the models instability to realistically simulate the small scale (subgrid) gradients in precursor concentrations in and around large point source plumes.

Pleim, Jonathan E.↗

A Multipole Expansion Method for Analyzing Lightning Field Changes

Changes in the surface electric field are frequently used to infer the locations and magnitudes of lightning-caused changes in thundercloud charge distributions. The traditional procedure is to assume that the charges that are effectively deposited by the flash can be modeled either as a single point charge (the Q model) or a point dipole (the P model). The Q model has four unknown parameters and provides a good description of many cloud-to-ground (CG) flashes. The P model has six unknown parameters and describes many intracloud (IC) discharges. In this paper we introduce a new analysis method that assumes that the change in the cloud charge can be described by a truncated multipole expansion, i.e., there are both monopole and dipole terms in the unknown source distribution, and both terms are applied simultaneously. This method can be used to analyze CG flashes that are accompanied by large changes in the cloud dipole moment and complex IC discharges. If there is enough information content in the measurements, the model can also be generalized to include quadrupole and higher order terms. The parameters of the charge moments are determined using a dme-dimensional grid search in combination with a linear inversion, and because of this, local minima in the error function and the associated solution ambiguities are avoided. The multipole method has been tested on computer-simulated sources and on natural lightning at the NASA Kennedy Space Center and U.S. Air Force Eastern Range.

Koshak, William J.↗

A Multipole Expansion Method for Analyzing Lightning Field Changes

Changes in the surface electric field are frequently used to infer the locations and magnitudes of lightning-caused changes in thundercloud charge distributions. The traditional procedure is to assume that the charges that are effectively deposited by the flash can be modeled either as a single point charge (the Q-model) or a point dipole (the P-model). The Q-model has 4 unknown parameters and provides a good description of many cloud-to-ground (CG) flashes. The P-model has 6 unknown parameters and describes many intracloud (IC) discharges. In this paper, we introduce a new analysis method that assumes that the change in the cloud charge can be described by a truncated multipole expansion, i.e., there are both monopole and dipole terms in the unknown source distribution, and both terms are applied simultaneously. This method can be used to analyze CG flashes that are accompanied by large changes in the cloud dipole moment and complex IC discharges. If there is enough information content in the measurements, the model can also be generalized to include quadrupole and higher order terms. The parameters of the charge moments are determined using a 3-dimensional grid search in combination with a linear inversion, and because of this, local minima in the error function and the associated solution ambiguities are avoided. The multipole method has been tested on computer simulated sources and on natural lightning at the NASA Kennedy Space Center and USAF Eastern Range.

Koshak, William J.↗

Conditional Lie-Baecklund symmetries and concavity of solutions to nonlinear parabolic equations

In this paper, we study the relation between conditional Lie-Baecklund symmetries and the estimates for concavity (or convexity) and B-concavity (or B-convexity) of solutions to nonlinear parabolic equations. It is shown that the estimates for concavity and B-concavity of solutions are associated with the CLBSs of nonlinear parabolic equations. The estimates on concavity and B-concavity for the curve shortening equation, a fast diffusion model and a generalized p-Laplacian equation with source term are established.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Continuous observations of long-term variations in cosmic X-ray sources

Results are reported for the Charged Particle Measurements Experiment which was conducted on board IMP-7 to detect X-ray fluxes from the sun, the galactic center, Tau X-1, and Sco X-1 over a nine-month period. Autocorrelation analysis of the data indicates a probable 80-day periodicity in the flux from Sco X-1, a 110-day periodicity in the flux from the galactic center, no periodicities in the flux from Tau X-1, and a strong 27-day periodicity in the solar X-ray flux. A transient event detected within the cluster of sources constituting the galactic center is reported which lasted about two months and had a flux roughly equal to the regular flux from this area. It is noted that this was the only transient event detected in the whole area under continuous observation for the duration of the experiment.

Wende, C. D.↗

Sensitivities and correlations of critical experiments due to uncertainties of system parameters and nuclear data - 14416

With increasing demand on accuracy of criticality calculations, correlations between benchmark experiments due to system parameter uncertainties become of interest in bias determination. The impact of different interpretations of system parameter uncertainties on the calculation of covariances and correlations of k{sub eff} is discussed in this article. Following the suggestion of the OECD/NEA EGUACSA Benchmark phase IV [1], 21 experiments from the ICSBEP international Handbook of Evaluated Criticality Safety Benchmarks [2] are used for this analysis (LEU-COMP-THERM series 07, exp. 01-04 and 39, exp. 01-17). The experiments share certain assembly and fuel features and were carried out in the same lab. Therefore, correlations in the calculation of k{sub eff} appear. Correlation coefficients between experiments due to nuclear data uncertainties are calculated with TSUNAMI [3] and show high values for most experiments. For the correlation analysis due to system parameter uncertainties mainly two scenarios are considered: In scenario A all uncertain parameters are varied mutually for all fuel rods, representing a systematic deviation of the actual experimental setup from the design value. This analysis is performed for all experiments listed above. In scenario E certain parameters like the outer cladding diameter are varied for each fuel rod individually, representing a random scattering of the varied parameter. Scenarios B, C and D represent intermediate scenarios between A and E, which are discussed shortly. Uncertainty and sensitivity calculations of k{sub eff} on the uncertain experimental parameters based on Monte Carlo sampling are presented and discussed. The calculations were performed with SUnCISTT (Sensitivities and Uncertainties in Criticality Inventory and Source Term Tool [4]) and SCALE 6.1.2 [3]. For the 21 EGUACSA proposed experiments the outer cladding diameter is the leading effect for the uncertainty of k{sub eff} for scenario A. In contrast, for scenario E the impact of the cladding diameter on k{sub eff} cancels out due to rod wise variations leaving the fuel diameter as the leading effect. The correlation analysis based on system parameter uncertainties indicates a significant dependence of the correlation coefficients on the interpretation of the uncertainties. It shows high values for scenario A, if the neutronic features are similar (EALF, H/U). For scenario E the overall correlations are significantly smaller and variations between experiments decrease. The impact of the determined correlations on bias calculations of application cases will be discussed by the authors in the accompanying paper 'Impact of correlated data in validation procedures'. (authors)

42 ENGINEERING↗

Complex impedance spectroscopy of alkali impurities in as-grown, irradiated and annealed quartz

This work compares the dielectric relaxation properties of different crystalline quartz materials, according to their source (natural or synthetics). It is shown that these relaxation properties are due to a hopping process of alkaline (Li{sup +}, Na{sup +}, and K{sup +}) impurities located near [Al-O{sub 4}]{sup 5-} tetrahedra. A detailed analysis, in terms of the distribution function of the dielectric loss peak, allowed us to perfectly distinguish the different types of as-grown quartz. We show that (i) the natural quartz has less stable M{sup +} charge carriers than the synthetic materials and that (ii) the homogeneity of the M{sup +} trapping sites, created by the [Al-O{sub 4}]{sup 5-} tetrahedra, strongly depends on the crystal growth conditions. These features were then studied using quartz samples with different treatment conditions: as-grown, irradiated, or annealed at high temperature. We propose that the irradiation greatly facilitates the M{sup +} relaxation, by creating additional low energy M{sup +} hosting sites, whose number depends on the source of the quartz crystals. We also show that for 100 krad irradiation, the saturation state of the defects is already reached for all the materials under consideration. Finally, we propose that the irradiation followed by annealing at 450 deg. C improves the M{sup +} stability and homogeneity in quartz materials, compared with the as-grown materials, this trend being much more relevant for the natural than for the synthetic quartz.

36 MATERIALS SCIENCE↗

A Phenomenological Model for the Transport and Plugging of Aerosol through Stress Corrosion Cracks

Recent experimental evidence from Sandia (2018) demonstrated partial microchannel plugging due to particulate deposition. A direct consequence is that the accuracy of consequence assessments can be improved by accounting for the leak path deposition of aerosol in the source term. The filtration effect of microchannels, such as cracks, is relevant to the source term assessments. An important side effect of aerosol deposition in leak paths could be the plugging of the leak path. This report summarizes current progress (as of end of FY19) on the development of a phenomenological model of aerosol transport, deposition, and plugging through microchannels. The purpose is to introduce a generic, reliable numerical model for prediction of aerosol transport, deposition, and plugging in leak paths that are similar to stress corrosion cracks while accounting for potential plugging formation. This effort includes (i) development of a numerical model to analyze the various deposition processes in leak paths and provide quantitative estimates of penetration factors, as well as an understanding of the variables that affect them, (ii) confirmation of model validity with theoretical and experimental data, and (iii) parametric analysis for different scenarios including various particle sizes, pressures, and crack dimensions. Such a model could be used to improve the accuracy of consequence assessments and reduce the uncertainty of radiological consequence predictive analyses by taking the filtering effect of leak path aerosol deposition and plugging into account in the source term. This report includes: (i) an overview of main stress corrosion cracking characteristics, (ii) an overview of the developed numerical model to analyze the various deposition processes in leak paths, to provide quantitative estimates of penetration factors, and to gain an understanding of the variables that affect them, (iii) a summary of validation results and verification of the model’s validity with recent experimental results from Sandia and others, and (iv) a model application example.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The infrared spectrum of the He–C{sub 2}D{sub 2} complex

Spectra of the helium-acetylene complex are elusive because this weakly bound system lies close to the free rotor limit. Previously, limited assignments of He–C{sub 2}D{sub 2} transitions in the R(0) region of the ν{sub 3} fundamental band (≈2440 cm{sup −1}) were published. Here, new He–C{sub 2}D{sub 2} infrared spectra of this band are obtained using a tunable optical parametric oscillator laser source to probe a pulsed supersonic slit jet expansion from a cooled nozzle, and the analysis is extended to the weaker and more difficult P(1) and R(1) regions. A term value approach is used to obtain a consistent set of “experimental” energy levels. These are compared directly with calculations using two recently reported ab initio intermolecular potential energy surfaces, which exhibit small but significant differences. Rovibrational energies for the He–C{sub 2}H{sub 2} complex are also calculated using both surfaces. A Coriolis model, useful for predicting spectral intensities, is used to interpret the energy level patterns, and a comparison with the isoelectronic complex He–CO is made.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

INTEGRAL AND SWIFT OBSERVATIONS OF THE Be X-RAY BINARY 4U 1036-56 (RX J1037.5-5647) AND ITS POSSIBLE RELATION WITH {gamma}-RAY TRANSIENTS

We present timing, spectral, and long-term temporal analysis of the high-mass X-ray binary 4U 1036-56 using INTEGRAL and Swift observations. We show that it is a weak hard X-ray source spending a major fraction of the time in quiescence and only occasionally characterized by X-ray outbursts. The outburst activity we report here lasts several days, with a dynamic range spanned by the luminosity in quiescence and in outburst as high as {approx}30. We report the detection of pulse period at 854.75 {+-} 4.39 s during an outburst, which is consistent with previous measurements. Finally, we analyze the possibility of the association of 4U 1036-56 with the unidentified transient {gamma}-ray sources AGL J1037-5708 and GRO J1036-55, as prompted by its positional correlation.

79 ASTRONOMY AND ASTROPHYSICS↗

Building a nest at tree level: Classical metastability and nontrivial vacuum structure in supersymmetric field theories

It is becoming increasingly clear that metastable vacua may play a prominent role in supersymmetry breaking. To date, however, this idea has been realized only in models where nonperturbative dynamics complicates the analysis of metastability. In this paper, we present a simple construction in which metastable vacua occur classically, i.e., at tree level, and in which supersymmetry breaking is sourced by both D terms and F terms. All relevant dynamics is perturbative, and hence calculations of vacuum energies and lifetimes can be performed explicitly. Moreover, we find that our construction can even give rise to multiple nonsupersymmetric vacua which are degenerate. The nontrivial vacuum structure of such models therefore suggests that they can provide a rich arena for future studies of vacuum metastability in supersymmetric field theories. Our results may also have important consequences for Z{sup '} phenomenology and the string landscape.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Colloquium: Comparison of astrophysical and terrestrial frequency standards

The stability of pulse arrival times from pulsars and white dwarfs have been reanalyzed using several analysis tools for measuring the noise characteristics of sampled time and frequency data. The best terrestrial artificial clocks are shown to substantially exceed the performance of astronomical sources as timekeepers in terms of accuracy (as defined by cesium primary frequency standards) and stability. This superiority in stability can be directly demonstrated over time periods up to 2 years, where there is high quality data for both. Beyond 2 years there is a deficiency of data for clock-to-clock comparisons, and both terrestrial and astronomical clocks show equal performance being equally limited by the quality of the reference time scales used to make the comparisons. Nonetheless, the detailed accuracy evaluations of modern terrestrial clocks imply that these new clocks are likely to have a stability better than any astronomical source up to comparison times of at least hundreds of years. This article is intended to provide a correct appreciation of the relative merits of natural and artificial clocks. The use of natural clocks as tests of physics under the most extreme conditions is entirely appropriate; however, the contention that these natural clocks, particularly white dwarfs, can compete as timekeepers against devices constructed by mankind is shown to be doubtful.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Residential and Transport Energy Use in India: Past Trend and Future Outlook

The main contribution of this report is to characterize the underlying residential and transport sector end use energy consumption in India. Each sector was analyzed in detail. End-use sector-level information regarding adoption of particular technologies was used as a key input in a bottom-up modeling approach. The report looks at energy used over the period 1990 to 2005 and develops a baseline scenario to 2020. Moreover, the intent of this report is also to highlight available sources of data in India for the residential and transport sectors. The analysis as performed in this way reveals several interesting features of energy use in India. In the residential sector, an analysis of patterns of energy use and particular end uses shows that biomass (wood), which has traditionally been the main source of primary energy used in households, will stabilize in absolute terms. Meanwhile, due to the forces of urbanization and increased use of commercial fuels, the relative significance of biomass will be greatly diminished by 2020. At the same time, per household residential electricity consumption will likely quadruple in the 20 years between 2000 and 2020. In fact, primary electricity use will increase more rapidly than any other major fuel -- even more than oil, in spite of the fact that transport is the most rapidly growing sector. The growth in electricity demand implies that chronic outages are to be expected unless drastic improvements are made both to the efficiency of the power infrastructure and to electric end uses and industrial processes. In the transport sector, the rapid growth in personal vehicle sales indicates strong energy growth in that area. Energy use by cars is expected to grow at an annual growth rate of 11percent, increasing demand for oil considerably. In addition, oil consumption used for freight transport will also continue to increase .

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A model for the noise radiated by turbulent boundary layers and its interaction with laminar layers in supersonic flow

Motivated by the noise-boundary layer transition problem in supersonic flow, the interaction between incoming aerodynamic noise and the laminar boundary layer was studied. The noise field was modeled as a Mach wave radiation field consisting of discrete waves emanating from coherent turbulent entities moving downstream within the supersonic turbulent boundary layer. The individual disturbances are likened to miniature sonic booms and the laminar boundary layer is strafed by the waves as the sources move downstream. The mean, autocorrelation, and power spectral density of the field are expressed in terms of the wave shapes and their average arrival rates. The emphasis in the interaction analysis is on the behavior of the shocklets in the noise field. The shocklets are shown to be focused by the laminar boundary layer in its outer region. Borrowing wave-propagation terminology, this region is termed the caustic region. Using scaling laws from sonic boom work, focus factors at the caustic are estimated to vary from 2 to 6 for incoming shocklet strengths of 1 to .01 percent of the free stream pressure level. The situation regarding experimental evidence of the caustic region is reviewed. It is not clear whether the focusing effectively promotes early transition. Additional observations concerning the interaction problem are presented.

Schopper, M. R.↗

A model for the noise radiated by turbulent boundary layers and its interaction with laminar layers in supersonic flow

Motivated by the noise-boundary layer transition problem in supersonic flow, the interaction between incoming aerodynamic noise and the laminar boundary layer has been studied. The noise field has been modeled as a Mach wave radiation field consisting of discrete waves emanating from coherent turbulent entities moving downstream within the supersonic turbulent boundary layer. The individual disturbances are likened to miniature sonic booms and the laminar boundary layer is strafed by the waves as the sources move downstream. The mean, autocorrelation, and power spectral density of the field are expressed in terms of the wave shapes and their average arrival rates. The emphasis in the interaction analysis is on the behavior of the shocklets in the noise field. The shocklets are shown to be focused by the laminar boundary layer in its outer region. Borrowing wave-propagation terminology, this region is termed the caustic region. Using scaling laws from sonic boom work, focus factors at the caustic are estimated to vary from 2 to 6 for incoming shocklet strengths of 1 to .01 percent of the free stream pressure level.

Schopper, M. R.↗

Efficient Ada multitasking on a RISC register window architecture

This work addresses the problem of reducing context switch overhead on a processor which supports a large register file - a register file much like that which is part of the Berkeley RISC processors and several other emerging architectures (which are not necessarily reduced instruction set machines in the purest sense). Such a reduction in overhead is particularly desirable in a real-time embedded application, in which task-to-task context switch overhead may result in failure to meet crucial deadlines. A storage management technique by which a context switch may be implemented as cheaply as a procedure call is presented. The essence of this technique is the avoidance of the save/restore of registers on the context switch. This is achieved through analysis of the static source text of an Ada tasking program. Information gained during that analysis directs the optimized storage management strategy for that program at run time. A formal verification of the technique in terms of an operational control model and an evaluation of the technique's performance via simulations driven by synthetic Ada program traces are presented.

Kearns, J. P.↗