Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Partitioning of unstructured problems for parallel processing

Many large-scale computational problems are based on unstructured computational domains. Primary examples are unstructured grid calculations based on finite volume methods in computational fluid dynamics, or structural analysis problems based on finite element approximations. The question of how to distribute such unstructured computational domains over a large number of processors in a MIMD machine with distributed memory is addressed. A graph theoretical framework for these problems is established. Based on this framework three decomposition algorithms are introduced. In particular a new decomposition algorithm is discussed, which is based on the computation of an eigenvector of the Laplacian matrix associated with the graph. Numerical comparisons on large-scale two- and three-dimensional problems demonstrate the superiority of the new spectral bisection algorithm.

Simon, H. D.↗
NASA NTRS1999

Jet Mixing Enhancement by Feedback Control

The objective of this work has been to produce methodologies for high speed jet noise reduction based on natural mechanisms and enhanced feedback control to affect frequencies and structures in a prescribed manner. In this effort the two-point hot wire measurements obtained in the Langley jet facility by Ukeiley were used in conjuction with linear stochastic estimation (LSE) to implement the LSE component of the complementary technique. This method combines the Proper Orthogonal Decomposition (POD) and LSE to provide an experimental low dimensional time dependent description of the flow field. From such a description it should be possible to identify short time high strain rate events in the jet which contribute to the noise. The main task completed for this effort is summarized: LSE experiments were performed at the downstream locations where the two point hot wire measurements have been obtained by Ukeiley. These experiments involved sampling simultaneously hot wire signals from a relatively course spatial grid in gamma and theta. From this simultaneous data, coupled with the two-point measurements of Ukeiley via the LSE components of the complementary technique, an experimental low dimensional description of the jet at 4, 5, 6, 7 and 8 diameters downstream was obtained for Mach numbers of 0.3 and 0.6. We first present an overview of the theory involved. We finish up with a statement of the work performed and finally provide charts from a 1999 APS talk which summarizes the results.

Glauser, Mark↗
NASA NTRS2003

Lockheed Martin Response to the OSP Challenge

The Lockheed Martin Orbital Space Plane System provides crew transfer and rescue for the International Space Station more safely and affordably than current human space transportation systems. Through planned upgrades and spiral development, it is also capable of satisfying the Nation's evolving space transportation requirements and enabling the national vision for human space flight. The OSP System, formulated through rigorous requirements definition and decomposition, consists of spacecraft and launch vehicle flight elements, ground processing facilities and existing transportation, launch complex, range, mission control, weather, navigation, communication and tracking infrastructure. The concept of operations, including procurement, mission planning, launch preparation, launch and mission operations and vehicle maintenance, repair and turnaround, is structured to maximize flexibility and mission availability and minimize program life cycle cost. The approach to human rating and crew safety utilizes simplicity, performance margin, redundancy, abort modes and escape modes to mitigate credible hazards that cannot be designed out of the system.

Sullivan, Robert T.↗
DOE OSTI2024

A modular and extensible CHARMM-compatible model for all-atom simulation of polypeptoids

Peptoids (N-substituted glycines) are a class of sequence-defined synthetic peptidomimetic polymers with applications including drug delivery, catalysis, and biomimicry. Classical molecular simulations have been used to predict and understand the conformational dynamics of single chains and their self-assembly into morphologies including sheets, tubes, spheres, and fibrils. The CGenFF-NTOID model based on the CHARMM General Force Field has demonstrated success in accurate all-atom molecular modeling of peptoid structure and thermodynamics. Extension of this force field to new peptoid side chains has historically required reparameterization of side chain bonded interactions against ab initio data. This fitting protocol improves the accuracy of the force field but is also burdensome and precludes modular extensibility of the model to arbitrary peptoid sequences. In this work, we develop and demonstrate a Modular Side Chain CGenFF-NTOID (MoSiC-CGenFF-NTOID) as an extension of CGenFF-NTOID employing a modular decomposition of the peptoid backbone and side chain parameterizations, wherein arbitrary side chains within the large family of substituted methyl groups (i.e., –CH 3 , –CH 2 R, –CHRR', and –CRR'R") are directly ported from CGenFF. We validate this approach against ab initio calculations and experimental data to develop a MoSiC-CGenFF-NTOID model for all 20 natural amino acid side chains along with 13 commonly used synthetic side chains and present an extensible paradigm to efficiently determine whether a novel side chain can be directly incorporated into the model or whether refitting of the CGenFF parameters is warranted. We make the model freely available to the community along with a tool to perform automated initial structure generation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Investigation of Causal Relationships of the Cross‐Scale Wave Coupling Through Information Theoretical Approach

On 2015 October 2, MMS spacecraft observed an electron micro-injection event near the southern hemispheric high-altitude cusp, coinciding with intense wave activity across several frequency bands. Here, we investigated the MMS magnetic field and plasma during this event to explore cross-scale coupling among the wave modes. Employing the Hilbert-Huang transform, we perform an empirical mode decomposition to extract frequencies and amplitudes of the intrinsic mode functions (IMFs). In this analysis, we establish both linear and nonlinear relationships and examine the information transfer between the IMFs. Notably, the transfer entropy suggests that high frequency ion cyclotron waves may be driven by the mirror mode structures. Our case study effectively demonstrates the utility of the information theory based tools for studying cross-scale wave coupling phenomena.

Rivera, Elmer C. [Andrews University, Berrien Spri↗
DOE OSTI2025

Gluonic Structure from Instantons

The instanton vacuum provides an effective description of chiral symmetry breaking by local topological fluctuations of the gauge fields, as observed in lattice QCD simulations. The resulting effective dynamics at momenta below 1/$\bar{ρ}$ ≈ 0.6 GeV explains the basic features of light-quark correlation functions and is used extensively in studies of hadron structure. The instanton fields also make definite contributions to the gluonic structure of light hadrons, as expressed in the matrix elements of composite quark– gluon or gluon operators. The article reviews the gluonic structure of light hadrons (nucleon, pion) induced by instantons. This includes: (i) twist-2 parton distributions and momentum sum rule; (ii) twist-3 angular momentum and spin-orbit interactions; (iii) twist-3 and twist-4 quark–gluon correlations and power corrections; (iv) trace anomaly and hadron mass decomposition; (v) scalar gluon form factors and mechanical properties; (vi) axial anomaly and pseudoscalar gluon form factors. It also discusses possible further applications of the methods and recent developments including gauge field configurations beyond instantons.

Weiss, C. [Thomas Jefferson National Accelerator F↗
NASA NTRS2015

Thermochemical Ablation Analysis of the Orion Heatshield

The Orion Multi-Purpose Crew Vehicle will one day carry astronauts to the Moon and beyond, and Orion's heatshield is a critical component in ensuring their safe return to Earth. The Orion heatshield is the structural component responsible for absorbing the intense heating environment caused by re-entry to Earth's atmosphere. The heatshield is primarily composed of Avcoat, an ablative material that is consumed during the re-entry process. Ablation is primarily characterized by two processes: pyrolysis and recession. The decomposition of in-depth virgin material is known as pyrolysis. Recession occurs when the exposed surface of the heatshield reacts with the surrounding flow. The Orion heatshield design was changed from an individually filled Avcoat honeycomb to a molded block Avcoat design. The molded block Avcoat heatshield relies on an adhesive bond to keep it attached to the capsule. In some locations on the heatshield, the integrity of the adhesive bond cannot be verified. For these locations, a mechanical retention device was proposed. Avcoat ablation was modelled in CHAR and the in-depth virgin material temperatures were used in a Thermal Desktop model of the mechanical retention device. The retention device was analyzed and shown to cause a large increase in the maximum bondline temperature. In order to study the impact of individual ablation modelling parameters on the heatshield sizing process, a Monte Carlo simulation of the sizing process was proposed. The simulation will give the sensitivity of the ablation model to each of its input parameters. As part of the Monte Carlo simulation, statistical uncertainties on material properties were required for Avcoat. Several properties were difficult to acquire uncertainties for: the pyrolysis gas enthalpy, non-dimensional mass loss rate (B´c), and Arrhenius equation parameters. Variability in the elemental composition of Avcoat was used as the basis for determining the statistical uncertainty in pyrolysis gas enthalpy and B´c. A MATLAB program was developed to allow for faster, more accurate and automated computation of Arrhenius reaction parameters. These parameters are required for a material model to be used in the CHAR ablation analysis program. This MATLAB program, along with thermogravimetric analysis (TGA) data, was used to generate uncertainties on the Arrhenius parameters for Avcoat. In addition, the TGA fitting program was developed to provide Arrhenius parameters for the ablation model of the gap filler material, RTV silicone.

Sixel, William↗
NASA NTRS1981

Numerical simulation of a compressible homogeneous, turbulent shear flow

A direct, low Reynolds number, numerical simulation was performed on a homogeneous turbulent shear flow. The full compressible Navier-Stokes equations were used in a simulation on the ILLIAC IV computer with a 64,000 mesh. The flow fields generated by the code are used as an experimental data base, to examine the behavior of the Reynols stresses in this simple, compressible flow. The variation of the structure of the stresses and their dynamic equations as the character of the flow changed is emphasized. The structure of the tress tensor is more heavily dependent on the shear number and less on the fluctuating Mach number. The pressure-strain correlation tensor in the dynamic uations is directly calculated in this simulation. These correlations are decomposed into several parts, as contrasted with the traditional incompressible decomposition into two parts. The performance of existing models for the conventional terms is examined, and a model is proposed for the 'mean fluctuating' part.

Feiereisen, W. J.↗
NASA NTRS1984

Design of a linear projector for use with the normal modes of the GLAS 4th order GCM

The design of a linear projector for use with the normal modes of a model of atmospheric circulation is discussed. A central element in any normal mode initialization scheme is the process by which a set of data fields - winds, temperatures or geopotentials, and surface pressures - are expressed ("projected') in terms of the coefficients of a model's normal modes. This process is completely analogous to the Fourier decomposition of a single field (indeed a FFT applied in the zonal direction is a part of the process). Complete separability in all three spatial dimensions is assumed. The basis functions for the modal expansion are given. An important feature of the normal modes is their coupling of the structures of different fields, thus a coefficient in a normal mode expansion would contain both mass and momentum information.

Bloom, S. C.↗
NASA NTRS2007

Ultra-Lightweight Hybrid Thin-Film Solar Cells: A Survey of Enabling Technologies for Space Power Applications

The development of hybrid inorganic/organic thin-film solar cells on flexible, lightweight, space-qualified, durable substrates provides an attractive solution for fabricating solar arrays with high mass specific power (W/kg). Next generation thin-film technologies may well involve a revolutionary change in materials to organic-based devices. The high-volume, low-cost fabrication potential of organic cells will allow for square miles of solar cell production at one-tenth the cost of conventional inorganic materials. Plastic solar cells take a minimum of storage space and can be inflated or unrolled for deployment. We will explore a cross-section of in-house and sponsored research efforts that aim to provide new hybrid technologies that include both inorganic and polymer materials as active and substrate materials. Research at University of Texas at Arlington focuses on the fabrication and use of poly(isothianaphthene-3,6-diyl) in solar cells. We describe efforts at Norfolk State University to design, synthesize and characterize block copolymers. A collaborative team between EIC Laboratories, Inc. and the University of Florida is investigating multijunction polymer solar cells to more effectively utilize solar radiation. The National Aeronautics and Space Administration (NASA)/Ohio Aerospace Institute (OAI) group has undertaken a thermal analysis of potential metallized substrates as well as production of nanoparticles of CuInS2 and CuInSe2 in good yield at moderate temperatures via decomposition of single-source precursors. Finally, preliminary work at the Rochester Institute of Technology (R.I.T.) to assess the impact on performance of solar cells of temperature and carbon nanotubes is reported. Technologies that must be developed to enable ultra-lightweight solar arrays include: monolithic interconnects, lightweight array structures, and new ultra-light support and deployment mechanisms. For NASA applications, any solar cell or array technology must not only meet weight and AMO efficiency goals, but also must be durable enough to survive launch conditions and space environments.

Hepp, Aloysius F.↗
NASA NTRS2009

Thermal Decomposition of an Impure (Roxbury) Siderite: Relevance to the Presence of Chemically Pure Magnetite Crystals in ALH84001 Carbonate Disks

The question of the origin of nanophase magnetite in Martian meteorite ALH84001 has been widely debated for nearly a decade. Golden et al. have reported producing nearly chemically pure magnetite from thermal decomposition of chemically impure siderite [(Fe, Mg, Mn)CO3]. This claim is significant for three reasons: first, it has been argued that chemically pure magnetite present in the carbonate disks in Martian meteorite ALH84001 could have formed by the thermal decomposition of the impure carbonate matrix in which they are embedded; second, the chemical purity of magnetite has been previously used to identify biogenic magnetite; and, third, previous studies of thermal decomposition of impure (Mg,Ca,Mn)-siderites, which have been investigated under a wide variety of conditions by numerous researchers, invariably yields a mixed metal oxide phase as the product and not chemically pure magnetite. The explanation for this observation is that these siderites all possess the same crystallographic structure (Calcite; R3c) so solid solutions between these carbonates are readily formed and can be viewed on an atomic scale as two chemically different but structurally similar lattices.

McKay, D.S.↗
DOE OSTI2026

21 cm Power Spectrum Analysis of North Celestial Pole Observations with the Tianlai Dish Pathfinder Array

The Tianlai Dish Pathfinder Array (TDPA) is a radio interferometer designed to test techniques for 21 cm intensity mapping in the post-reionization Universe as a means of measuring large-scale cosmic structure. Using nine nights of observations targeting the North Celestial Pole field, totaling approximately 107 hr of integration time, we analyze data in the frequency range 700–800 MHz (corresponding to redshift z ∼ 0.9). We do the data format conversion, radio frequency interference flagging, calibration, imaging and point source subtraction, and foreground removal via Singular Value Decomposition. The spherically averaged power spectrum Δ 2 (k) is obtained. Furthermore, this work successfully establishes and validates a comprehensive data analysis framework for the TDPA. We identify key improvements including sky model refinement, increased integration time, and pipeline optimization that will enable future detection of the 21 cm signal through auto-correlation and cross-correlation with optical galaxy surveys.

cosmology: large-scale structure of universe↗
DOE OSTI2025

Chiral population analysis: a real space visualization of X-ray circular dichroism

The microscopic understanding of probing and controlling molecular chirality is of considerable interest. Numerous spectroscopic techniques are capable of monitoring molecular asymmetry and its consequences, ranging from the infrared to the X-ray regime. Resonant X-rays have long been used to investigate local atomic sites within molecules thanks to the localized nature of core electronic transitions. These techniques can be used to determine the extent to which chirality is a local versus a delocalized property. However, how to systematically partition dichroic contributions from the point of view of electronic structure simulations remains an open question. Here, we introduce the concept of chiral population analysis that connects chirality to the atomic orbital picture. In analogy with Mulliken population analysis, which assigns charges to atomic orbitals, chiral populations allow the dichroic response to be distributed among the participating atomic orbitals. This decomposition can be further visualized in real space by representing it in terms of isosurface plots, providing an intuitive way to connect the dichroic response to its origins. Thus chiral population analysis can be particularly useful to assess the extent to which a given electronic transition is sensitive to chirality as a local or global feature of the molecular geometry.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Development of a polysilicon process based on chemical vapor deposition (phase 1)

A dichlorosilane-based reductive chemical vapor deposition (CVD) process demonstrated is capable of producing, at low cost, high quality polycrystalline silicon. Testing of decomposition reactor heat shields to insure that the shield provides adequate personnel protection assuming a worst case explosion was completed. Minor modifications to a production reactor heat shield provided adequate heat shield integrity. Construction of the redesigned PDU (Process Development Unit) to accommodate all safety related information proceeded on schedule. Structural steel work was completed as is the piping and instrumentation design work. Major pieces of process equipment were received and positioned in the support structure and all transfer piping and conduits to the PDU were installed. Construction was completed on a feed system for supplying DCS to an intermediate sized reactor. The feed system was successfully interfaced with a reactor equipped with a modified heat shield. Reactor checkout was completed.

Mccormick, J.↗
NASA NTRS1988

Analysis of limit cycles in control systems for joint dominated structures

An approach to the modeling of limit cycles due to joint nonlinearities in large joint dominated space structures is presented which makes it possible to predict limit cycles and determine their stability. An actively controlled truss structure with nonlinear joints is modeled as a linear system with nonlinear feedback by separating the joint load-displacement characteristics into a linear part, which prevails at large displacements, and a nonlinear part. By replacing the joints by their linear parts, it is possible to perform a standard model decomposition which yields a reduced order linear model. Linear control laws can be easily included into the linear part of the system; nonlinear control laws can be implemented but they must be fed back to the linear model. The modeling approach described here allows straightforward limit cycle analysis.

Mercadal, M.↗
NASA NTRS2011

NASA Tech Briefs, July 2011

Topics covered include: 1) Collaborative Clustering for Sensor Networks; 2) Teleoperated Marsupial Mobile Sensor Platform Pair for Telepresence Insertion Into Challenging Structures; 3) Automated Verification of Spatial Resolution in Remotely Sensed Imagery; 4) Electrical Connector Mechanical Seating Sensor; 5) In Situ Aerosol Detector; 6) Multi-Parameter Aerosol Scattering Sensor; 7) MOSFET Switching Circuit Protects Shape Memory Alloy Actuators; 8) Optimized FPGA Implementation of Multi-Rate FIR Filters Through Thread Decomposition; 9) Circuit for Communication Over Power Lines; 10) High-Efficiency Ka-Band Waveguide Two-Way Asymmetric Power Combiner; 11) 10-100 Gbps Offload NIC for WAN, NLR, and Grid Computing; 12) Pulsed Laser System to Simulate Effects of Cosmic Rays in Semiconductor Devices; 13) Flight Planning in the Cloud; 14) MPS Editor; 15) Object-Oriented Multi Disciplinary Design, Analysis, and Optimization Tool; 16) Cryogenic-Compatible Winchester Connector Mount and Retaining System for Composite Tubes; 17) Development of Position-Sensitive Magnetic Calorimeters for X-Ray Astronomy; 18) Planar Rotary Piezoelectric Motor Using Ultrasonic Horns; 19) Self-Rupturing Hermetic Valve; 20) Explosive Bolt Dual-Initiated from One Side; 21) Dampers for Stationary Labyrinth Seals; 22) Two-Arm Flexible Thermal Strap; 23) Carbon Dioxide Removal via Passive Thermal Approaches; 24) Polymer Electrolyte-Based Ambient Temperature Oxygen Microsensors for Environmental Monitoring; 25) Pressure Shell Approach to Integrated Environmental Protection; 26) Image Quality Indicator for Infrared Inspections; 27) Micro-Slit Collimators for X-Ray/Gamma-Ray Imaging; 28) Scatterometer-Calibrated Stability Verification Method; 29) Test Port for Fiber-Optic-Coupled Laser Altimeter; 30) Phase Retrieval System for Assessing Diamond Turning and Optical Surface Defects; 31) Laser Oscillator Incorporating a Wedged Polarization Rotator and a Porro Prism as Cavity Mirror; 32) Generic, Extensible, Configurable Push-Pull Framework for Large-Scale Science Missions; 33) Dynamic Loads Generation for Multi-Point Vibration Excitation Problems; 34) Optimal Control via Self-Generated Stochasticity; 35) Space-Time Localization of Plasma Turbulence Using Multiple Spacecraft Radio Links; 36) Surface Contact Model for Comets and Asteroids; 37) Dust Mitigation Vehicle; 38) Optical Coating Performance for Heat Reflectors of the JWST-ISIM Electronic Component; 39) SpaceCube Demonstration Platform; 40) Aperture Mask for Unambiguous Parity Determination in Long Wavelength Imagers; 41) Spaceflight Ka-Band High-Rate Radiation-Hard Modulator; 42) Enabling Disabled Persons to Gain Access to Digital Media; 43) Cytometer on a Chip; 44) Principles, Techniques, and Applications of Tissue Microfluidics; and 45) Two-Stage Winch for Kites and Tethered Balloons or Blimps.

Source record↗
DOE OSTI2026

Mapping resonant inelastic x-ray scattering onto electronic structure of iridium compounds

Resonant inelastic X-ray scattering (RIXS) is an indispensable tool that can selectively probe the electronic structure of active sites in energy conversion systems, for example, iridium oxides. However, decoding the RIXS spectra remains challenging due to its inherently complex many-body interactions. Here, we analyze Ir L 3 edge RIXS spectra of Ir, IrCl 3 , and IrO 2 , employing the joint density of states (JDOS) calculated directly from electronic band-structure calculations. The overall energy-loss features in the RIXS spectra are well reproduced by the JDOS, reaffirming the close correspondence between electron–hole excitations and RIXS spectra observed in prior studies. Intriguingly, the RIXS spectra above ∼4 eV in metallic Ir and IrO 2 follow a power-law behavior, 𝐼 RIXS ~Δ −𝑝 , where Δ is the energy loss and p is the associated power-law exponent. This is consistent with edge-singularity behavior commonly found in resonant X-ray scattering from metallic samples. Furthermore, orbital-projected JDOS enables a decomposition of the IrO 2 spectrum into specific dd transitions, providing a clear interpretation of orbital excitations and an efficient strategy for decoding RIXS spectra in iridium-based energy conversion systems.

5d↗
NASA NTRS1987

Parallel processing in finite element structural analysis

A brief review is made of the fundamental concepts and basic issues of parallel processing. Discussion focuses on parallel numerical algorithms, performance evaluation of machines and algorithms, and parallelism in finite element computations. A computational strategy is proposed for maximizing the degree of parallelism at different levels of the finite element analysis process including: 1) formulation level (through the use of mixed finite element models); 2) analysis level (through additive decomposition of the different arrays in the governing equations into the contributions to a symmetrized response plus correction terms); 3) numerical algorithm level (through the use of operator splitting techniques and application of iterative processes); and 4) implementation level (through the effective combination of vectorization, multitasking and microtasking, whenever available).

Noor, Ahmed K.↗