Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface reflectance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Land Surface Albedo from MERIS Reflectances Using MODIS Directional Factors

MERIS Level 2 surface reflectance products are now available to the scientific community. This paper demonstrates the production of MERIS-derived surface albedo and Nadir Bidirectional Reflectance Distribution Function (BRDF) adjusted reflectances by coupling the MERIS data with MODIS BRDF products. Initial efforts rely on the specification of surface anisotropy as provided by the global MODIS BRDF product for a first guess of the shape of the BRDF and then make use all of the coincidently available, partially atmospherically corrected, cloud cleared, MERIS observations to generate MERIS-derived BRDF and surface albedo quantities for each location. Comparisons between MODIS (aerosol-corrected) and MERIS (not-yet aerosol-corrected) surface values from April and May 2003 are also presented for case studies in Spain and California as well as preliminary comparisons with field data from the Devil's Rock Surfrad/BSRN site.

Schaaf, Crystal L. B.↗
NASA NTRS1991

Recovery of reflectance from imaging spectrometer measured radiance using a radiative transfer code

Radiance data were acquired over part of the Clark Mountain Range, California in 1990 by the Airborne Visible Infrared Imaging Spectrometer (AVIRIS). From these calibrated radiance data, the lateral distribution of water vapor in precipitable mm was recovered through analysis of the 940 nm water absorption. Surface pressure height was calculated from the 760 nm oxygen absorption band in the AVIRIS data. Surface slopes are estimated from relative elevations derived from the equivalent water vapor elevation for a standard atmosphere. Atmospheric optical depths measured at the Mountain Pass site in these data are extended to the entire region and varied based on the calculated surface pressure elevation. These parameters, derived from every AVIRIS spatial element, are used to constrain the LOWTRAN 7 radiative transfer code for the recovery of surface reflectance. Once transformed to reflectance, the imaging spectrometer data may be analyzed quantitatively for determination of surface composition, and compared with reflectance measurements acquired from different locations, times, and instruments.

Green, Robert O.↗
NASA NTRS1975

Analysis of ground reflection of jet noise obtained with various microphone arrays over an asphalt surface

Ground reflection effects on the propagation of jet noise over an asphalt surface are discussed for data obtained using a 33.02 cm (13-in.) diameter nozzle with microphones at several heights and distances from the nozzle axis. Analysis of ground reflection effects is accomplished using the concept of a reflected signal transfer function which represents the influence of both the reflecting surface and the atmosphere on the propagation of the reflected signal in a mathematical model. The mathematical model used as a basis for the computer program was successful in significantly reducing the ground reflection effects. The range of values of the single complex number used to define the reflected signal transfer function was larger than expected when determined only by the asphalt surface. This may indicate that the atmosphere is affecting the propagation of the reflected signal more than the asphalt surface. Also discussed is the selective placement of the reinforcements and cancellations in the design of an experiment to minimize ground reflection effects.

Miles, J. H.↗
NASA NTRS1971

The spectral reflectance of natural surfaces.

The amount of solar energy reflected from various soils and types of vegetation has been measured as a function of sun elevation in six different wavelength ranges in the ultraviolet, visible and near-infrared regions of the spectrum. It is shown that there is a significant dependence of reflectance on both wavelength and elevation of the sun for all surfaces for which measurements were made.

Coulson, K. L.↗
DOE OSTI2025

ATR-SEIRAS Reveals Potential Inversion and Associated Electron Transfer Kinetics in the Reduction of Surface-Confined Anthraquinone

The detection of stable semiquinone radicals on an anthraquinone (AQ) layer chemically grafted to an electrode surface in aqueous electrolytes has been elucidated by using attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS). In very alkaline conditions (pH 13), the reduction of the AQ involves no proton transfer, but surface sensitive infrared spectroscopy reveals that the anthraquinone dianion forms a strong hydrogen bonding network with coadsorbed water, leading to irreversible features in the voltammetry. The potential dependence of the IR band assigned to the AQ radical is consistent with the enhanced hydrogen bonding network causing increased stabilization of the quinone radical and supports the predicted response of a system under mild potential inversion, whereby the formal potential for the reduction of the anthraquinone radical is positive of the reduction potential of the neutral AQ molecule. Time-resolved ATR-SEIRAS is used to measure the transient formation of the AQ •– radical, from which rate constant information can be extracted using the Butler–Volmer model involving two one-electron transfers without a direct disproportionation reaction. The potential dependence of the rate constants is consistent with the potential inversion and can be used to qualitatively simulate the measured cyclic voltammograms. In conclusion, the thermodynamic and kinetic analyses re-emphasize long established deficiencies associated with using one-electron reaction formalisms to characterize multi-electron systems.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
NASA NTRS1981

Temporal changes of the global reflectance of a wheat field as a function of daily solar irradiance

Based on in situ measurements of incident and reflected solar irradiation over a wheat field, daily values of the surface reflectance, a scene signature, were determined for a crop year. Diagnoses of these data reveal the character of the signature, and its changes with time, crop stage, and the magnitude of incident irradiance. The latter varies inversely with cloud cover.

Franceschini, G. A.↗
NASA NTRS1987

Analysis of a dual-wavelength surface reference radar technique

The use of the single-wavelength surface reference technique (SRT), the standard dual-wavelength technique (DWT), and dual-wavelength surface reference technique (DSRT) for measuring precipitation from space is analyzed, and the results are compared. The characteristics of the three methods are described, and the surface return powers during clear air conditions are measured. It is observed that the rain rate estimates obtained with the DWT and DSRT are identical in form, and the surface reflectance can be derived from the estimates by replacing the rain reflectivity statistics with those of the backscattering cross section of the surface. The data reveal that the DSRT is more applicable than the SRT when the wavelength correlation in the backscattering cross section of the surface is high or when the mean values of the backscattering cross section at the two wavelengths are nearly equal.

Meneghini, Robert↗
NASA NTRS1993

Modifications to the three-component classification algorithm for SAR data

Previously, a scattering model was used to classify SAR data as due to three mechanisms: surface or odd-bounce scattering; double-bounce scattering; and volume scattering. A Bragg rough-surface model was used for odd-bounce scattering, and two reflecting surfaces, as in a dihedral corner reflector, represented the double-bounce scattering mechanism. A random collection of infinitely thin cylinders was used to model the volume scattering contribution. It was assumed that the cylinders are uniformly oriented in all directions. In this work, modifications are made to the above model, which include specifying a preferred orientation for the cylinders representing branches and using thin cylinders of finite thickness as opposed to infinitely thin ones. In the first case, the preferred orientation is represented by a probability density function in the form of a dirac delta function. For the second case, small argument asymptotic expansions of Bessel functions are used to express the volume scattering contributions in terms of quantities containing the average radius of the cylinders. Since in each case the number of unknowns exceeds that of equations, simplifying assumptions are made. The solutions are applied to multifrequency polarimetric SAR data to obtain the new unknowns in addition to the relative contributions of each scattering mechanism. Several results are presented. It is found that the calculated percentage of each mechanism does not change significantly compared to the original model; however, additional information is gained about the scatterers.

Moghaddam, M.↗
NASA NTRSDate not supplied

Validation of GOES-17 ABI Reflective Channels Performance: Salar De Uyuni 2018 Field Campaign Results

Validation results from a reflectance-based field campaign at the Salar de Uyuni in Bolivia (September 2018) are presented for GOES-17 and GOES-16 Advanced Baseline Imagers (ABI) reflective channels. The in situ measurements were used to characterize the surface reflectance and the atmosphere in order to constrain a radiative transfer model and predict the reflectance at the top of the atmosphere (TOA), which was then compared to the ABI measurements. The field campaign provides TOA reflectance estimates over several days, allowing assessment of the calibration accuracy and stability of channels 1, 2, 3, 5 and 6 for GOES-17 andGOES-16 ABI. Channel 1 of GOES-17 ABI shows -5.5% bias in comparison to the ground-based predicted TOA. Over 6% bias in GOES-17 B2 was confirmed. A comparison to NOAA-20 VIIRS was also carried on during a near nadir overpass.

validation↗
NASA NTRS2021

Retrieving Aerosol Optical Depth and High Spatial Resolution Ocean Surface Wind Speed from CALIPSO: A Neural Network Approach

An innovative neural network retrieval algorithm is developed for retrieving ocean surface wind speed from the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) lidar measurements. The neural network is trained with CALIPSO ocean surface and atmospheric backscatter measurements together with collocated Advanced Microwave Scanning Radiometer for EOS(AMSR-E) ocean surface wind speed. Ocean surface wind speeds are derived by applying the neural network algorithm to CALIPSO measurements between 2008 and 2020. CALIPSO wind speed measurement of 2015 also compare with Advanced Microwave Scanning Radiometer 2 (AMSR-2) measurements on the Global Change Observation Mission –Water "Shizuku"(GCOM-W) satellite. Aerosol optical depths are then derived from CALIPSO’s ocean surface backscatter signal and theoretical ocean surface reflectance calculated from CALIPSO wind speed and Cox-Munk wind –surface slope variance relation. This CALIPSO wind speed retrieval technique is an improvement from Hu et al. (2008), as it can be applied to most clear skies with optical depths up to 1.5 without making assumptions about aerosol lidar ratio.

wind aerosols CALIPSO↗
NASA NTRS1975

High-efficiency graded band-gap Al/x/Ga/1-x/As-GaAs solar cell

A detailed theoretical analysis of an n-on-p graded band-gap Al(x)Ga(1-x)As-GaAs solar cell yields a maximum air mass zero power conversion efficiency of 17% compared to 9% for a similar GaAs cell. The analysis includes surface and bulk minority carrier recombination, junction recombination current, spectrally varying surface reflection, and series resistance loss. The maximum efficiency is determined for a surface recombination velocity of 10,000 cm/sec and hole and electron diffusion lengths of 2.1 and 7.6 microns, respectively. The improved efficiency is primarily due to a built-in electric field, caused by the band-gap gradation, accelerating photogenerated holes toward the p-n junction. This field reduces the surface and bulk recombination of the holes, and thereby enhances their collection.

Hutchby, J. A.↗
NASA NTRS2002

Changes in Earth 360 to 380 nm Reflectivity: 1980 to 2000

The TOMS reflectivity time series 1980 to 1992 and 1997 to 2000 have been combined to estimate change that have occurred over a 21 year period. The relative calibration of the two TOMS (Nimbus-7, N7 and Earth-Probe, EP) has been adjusted using the measured minimum reflectivity over mid-latitude ocean and land locations (50 deg.). The result is that the N7 reflectivity has been decreased by 0.02 to match the better-calibrated Earth-Probe/TOMS. Most of the local trend features seen in the N7 time series (1980 to 1992) have been continued in the combined time series, but the overall zonal average and global trends have changed. The correlation of cloud cover with solar activity (measured by the 10.7 cm solar radiation) that was present during the Nimbus-7 period (1980 to 1992) is no longer evident for the period 1980 to 2000. The UV reflectivity data are compared with changes in the AVHRR outgoing long-wavelength radiation (OLR) and show an expected anti-correlation with cloud-cover changes over the same period for many, but not all, features. The key results include a continuing decrease in cloud cover over Europe and North America and an increase in reflectivity near Antarctica. This also means that the previously published N7 UV surface reflectivity climatology should be reduced by 0.02.

Herman, J. R.↗
NASA NTRS2017

Estimating the Relative Water Content of Leaves in a Cotton Canopy

Remotely sensing plant canopy water status remains a long-term goal of remote sensing research. Established approaches to estimating canopy water status the Crop Water Stress Index, the Water Deficit Index and the Equivalent Water Thickness involve measurements in the thermal or reflective infrared. Here we report plant water status estimates based upon analysis of polarized visible imagery of a cotton canopy measured by ground Multi-Spectral Polarization Imager (MSPI). Such estimators potentially provide access to the plant hydrological photochemistry that manifests scattering and absorption effects in the visible spectral region.Twice during one day, +- 3 hours from solar noon, we collected polarized imagery and relative water content data on a cotton test plot located at the Arid Land Agricultural Research Center, United States Department of Agriculture, Maricopa, AZ. The test plot, a small portion of a large cotton field, contained stressed plants ready for irrigation. The evening prior to data collection we irrigated several rows of plants within the test plot. Thus, ground MSPI imagery from both morning and afternoon included cotton plants with a range of water statuses. Data analysis includes classifying the polarized imagery into sunlit reflecting, sunlit transmitting, shaded foliage and bare soil. We estimate the leaf surface reflection and interior reflection based upon the per pixel polarization and sunview directions. We compare our cotton results with our prior polarization results for corn and soybean leaves measured in the lab and corn leaves measured in the field.

Cotton Canopy↗
NASA NTRS2018

MODIS Collection 6 MAIAC Algorithm

This paper describes the latest version of the algorithm MAIAC (Multi-Angle Implementation of Atmospheric Correction) used for processing the MODIS (Moderate-resolution Imaging Spectroradiometer) Collection6 data record. Since initial publication in 2011-2012, MAIAC has changed considerably to adapt to global processing and improve cloud/snow detection, aerosol retrievals and atmospheric correction of MODIS data. The main changes include (1) transition from a 25 to 1 km scale for retrieval of the spectral regression coefficient (SRC) which helped to remove occasional blockiness at 25 km scale in the aerosol optical depth (AOD) and in the surface reflectance, (2) continuous improvements of cloud detection, (3) introduction of smoke and dust tests to discriminate absorbing fine- and coarse mode aerosols, (4) adding over-water processing, (5) general optimization of the LUT (LookUp-Table)-based radiative transfer for the global processing, and others. MAIAC provides an interdisciplinary suite of atmospheric and land products, including cloud mask (CM), column water vapor (CWV), AOD at 0.47 and 0.55 m, aerosol type (background, smoke or dust) and fine-mode fraction over water; spectral bidirectional reflectance factors (BRF), parameters of Ross-thick Lisparse (RTLS) bidirectional reflectance distribution function (BRDF) model and instantaneous albedo. For snow-covered surfaces, we provide subpixel snow fraction and snow grain size. All products come in standard HDF4 (software library) format at 1 km resolution, except for BRF, which is also provided at 500 m resolution on a sinusoidal grid adopted by the MODIS Land team. All products are provided on per-observation basis in daily files except for the BRDF/Albedo product, which is reported every 8 days. Because MAIAC uses a time series approach, BRDF/Albedo is naturally gap-filled over land where missing values are filled-in with results from the previous retrieval. While the BRDF model is reported for MODIS Land bands 1-7 and ocean band 8, BRF is reported for both land and ocean bands 1-12. This paper focuses on MAIAC cloud detection, aerosol retrievals and atmospheric correction and describes MCD19 data products and quality assurance (QA) flags.

MAIAC Algorithm↗
NASA NTRS1987

A reflection ansatz for surfaces with electrically small radii of curvature

Uniform reflection coefficients are developed for two- and three-dimensional, edge-like, perfectly conducting surfaces in the deep lit region. The uniformity is with respect to the electrical size of the radii of curvature at the surface's specular point. This uniformity allows one to physically interpret the reflected field from a smooth surface as one of the radii of curvature approaches zero as a diffracted field. The coefficients are heuristically generated from the exact scattered field for a two dimensional parabolic cylinder with plane wave illumination. The significant variables in this solution are the radii of curvature at the specular point and the distance between the specular point and the incident shadow boundaries in the principal planes. The field prediction accuracy of these reflection cofficients are critically examined through comparisons with reflected fields extracted from scattered fields of canonical surfaces.

Dominek, Allen K.↗
NASA NTRS1990

The seasonality of AVHRR data of temperate coniferous forests - Relationship with leaf area index

The relationship between the advanced very high resolution radiometer (AVHRR) normalized difference vegetation index (NDVI) and coniferous forest leaf area index (LAI) over the western United States is examined. AVHRR data from the NOAA-9 satellite were acquired of the western U.S. from March 1986 to November 1987 and monthly maximum value composites of AVHRR NDVI were calculated for 19 coniferous forest stands in Oregon, Washington, Montana, and California. It is concluded that the relationships under investigation vary according to seasonal changes in surface reflectance based on key biotic and abiotic controls including phenological changes in LAI caused by seasonal temperature and precipitation variations, the proportions of surface cover types contributing to the overall reflectance, and effects resulting from large variations in the solar zenith angle.

Spanner, Michael A.↗
NASA NTRS1998

Effects of Nonuniform Beam Filling on Rainfall Retrieval for the TRMM Precipitation Radar

The Tropical Rainfall Measuring Mission (TRMM) will carry the first spaceborne radar for rainfall observation. Because the TRMM Precipitation Radar (PR) footprint size of 4.3 km is greater than the scale of some convective rainfall events, there is concern that nonuniform filling of the PR antenna beam may bias the retrieved rain-rate profile. The authors investigate this effect theoretically and then observationally using data from the NASA Jet Propulsion Laboratory Airborne Rain Mapping Radar (ARMAR), acquired during Tropical Oceans Global Atmosphere Coupled Ocean Atmosphere Response Experiment in early 1993. The authors' observational approach is to simulate TRMM PR data using the ARMAR data and compare the radar observables and retrieved rain rate from the simulated PR data with those corresponding to the high-resolution radar measurements. The authors find that the path-integrated attenuation and the resulting path-averaged rain rate are underestimated. The reflectivity and rain rate near the top of the rainfall column are overestimated. The near-surface reflectivity can be overestimated or underestimated, with a mean error very close to zero. The near-surface rain rate, however, is usually underestimated, sometimes severely.

Durden, Stephen L.↗
DOE OSTI2022

Intensity Modulated Fiber Optic Sensor: A Novel Grid Measurement Unit

This paper presents a novel approach to physical displacement-based power grid measuring via an Intensity Modulated Fiber Optic Sensor (IMFOS). An IMFOS utilizes one fiber to transmit the intensity modulation light from its Electro-Optic controller to a fiber optic probe. The power grid voltage and current can induce physical displacements in transducers via the piezoelectric effect and the Lorentz law, respectively, which then result in a distance change between the optical probe and the reflective surface of the transducers. In parallel, multiple fibers are used to collect the reflective light for electro-optic conversion. Furthermore, a National Instruments-based characterization platform is set up for performance evaluation. Here, the testing result demonstrates that the IMFOS is immune to the inherent DC and low-frequency saturation issues prevalent in conventional potential and current transformers. Finally, the IMFOS is implemented in a Universal Grid Analyzer to illustrate its applicability for phasor estimation in actual power grids.

42 ENGINEERING↗