Search NASA⌕ Search

SEARCH · Search NASA

Results for “System Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Transient behavior of a scaled RCCS test facility under postulated fault and accident scenarios

Tests were performed on the Natural convection Shutdown heat removal Test Facility (NSTF) to simulate design basis accident and postulated fault scenarios. Residing at Argonne National Laboratory, the NSTF stands nearly 26-m in total height and reflects a ½ scale reactor cavity cooling system (RCCS) for high temperature gas cooled reactors. The following manuscript details three test conditions performed on the experimental test facility. The first simulated the reactor pressure vessel (RPV) boundary condition during depressurized conduction cool down accident with small primary leak, and was repeated during both winter and summer seasons. The second examined a short-circuit break between the inlet and outlet flow paths, and was performed in three incremental stages of nominal flow area break size. The third and final test case studied system behavior with varying amounts of cooling channel blockages, up to and including 50% flow areas. Nominal component temperatures, heat removal performance, and system stability will be presented to characterize the behavior at these conditions.

decay heat removal↗

Mechanistic study of methanol synthesis from CO₂ and H₂ on a modified model Mo₆S₈ cluster

We report the methanol synthesis from CO₂ and H₂ on metal (M = K, Ti, Co, Rh, Ni, and Cu)-modified model Mo₆S₈ catalyst using density functional theory (DFT). The results show that the catalytic behavior of a Mo₆S₈ cluster is changed significantly due to the modifiers, via the electron transfer from M to Mo₆S₈ and therefore the reduction of the Mo cation (ligand effect) and the direct participation of M in the reaction (ensemble effect) to promote some elementary steps. With the most positively charged modifier, the ligand effect in the case of K-Mo₆S₈ is the most obvious among the systems studied; however it cannot compete with the ensemble effect, which plays a dominate role in determining activity via the electrostatic attraction in particular to stabilize the CH x O y species adsorbed at the Mo sites of Mo₆S₈. In comparison, the ligand effect is weaker and the ensemble effect is more important when the other modifiers are used. In addition, the modifiers also vary the optimal reaction pathway for methanol synthesis on Mo₆S₈, ranging from the reverse water-gas shift (RWGS) + CO hydrogenation as that of Mo₆S₈ to the formate pathway. Finally, K is able to accelerate the methanol synthesis on Mo₆S₈ the most; while the promotion by Rh is relatively small. Using the modifiers like Ti, Co, Ni, and Cu, the activity of Mo₆S₈ is decreased instead. The relative stability between *HCOO and *HOCO is identified as a descriptor to capture the variation in mechanism and scales well with the estimated activity. Our study not only provides better understanding of the reaction mechanism and actives on the modified Mo₆S₈, but also predicts some possible candidates, which can be used a promoter to facilitate the CH₃OH synthesis on Mo sulfides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measured daylighting potential of a static optical louver system under real sun and sky conditions

Side-by-side comparisons were made over solstice-to-solstice changes in sun and sky conditions between an optical louver system (OLS) and a conventional Venetian blind set at a horizontal slat angle and located inboard of a south-facing, small-area, clerestory window in a full-scale office testbed. Daylight autonomy (DA), window luminance, and ceiling luminance uniformity were used to assess performance. The performance of both systems was found to have significant seasonal variation, where performance under clear sky conditions improved as maximum solar altitude angles transitioned from solstice to equinox. Although the OLS produced fewer hours per day of DA on average than the Venetian blind, the OLS never exceeded the designated 2000 cd/m2 threshold for window glare. In contrast, the Venetian blind was found to exceed the visual discomfort threshold over a large fraction of the day during equinox conditions. Notably, these peak periods of visual discomfort occurred during the best periods of daylighting performance. Luminance uniformity was analyzed using calibrated high dynamic range luminance images. Under clear sky conditions, the OLS was found to increase the luminance of the ceiling as well as produce a more uniform distribution. Furthermore, compared to conventional venetian blinds, the static optical sunlight redirecting system studied has the potential to significantly reduce the annual electrical lighting energy demand of a daylit space and improve the quality from the perspective of building occupants by consistently transmitting useful daylight while eliminating window glare.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Superfast high-energy storage hybrid device composed of MXene and Chevrel-phase electrodes operated in saturated LiCl electrolyte solution

Development of high power devices with improved energy density is a highly desired target for advanced energy storage applications. Herein we propose a new strategy of triply-hybridized supercapacitive energy storage device composed of hybrid battery–supercapacitor negative electrode [Mo 6 S 8 (Chevrel-phase)/Ti 3 C 2 (MXene)] coupled with positive nanoporous carbon electrode, integrated with novel yet unexplored saturated (14 M) aqueous solution of LiCl. The electrochemical stability window of this electrolyte solution (2.70 V) significantly exceeds the cell voltage (2.05 V) relevant for the asymmetrical (hybrid anode vs. carbon cathode) cells. The aqueous 14 M LiCl solution has far superior characteristics to that of the previously studies 21 m LiTFSI aqueous solution. The paper is also focused on a deep electroanalytical analysis of a peculiar redox/capacitive heterogeneity of hybrid electrodes. It establishes a variety of additivity rules for both differential and integral equilibrium and kinetic characteristics of the charging processes in hybrid electrodes, solving the puzzle of potential distribution of specific electrochemical energy stored the hybrid electrodes. A careful 3-level hybridization design of asymmetric supercapacitive storage devices enabled the integration of battery and supercapacitor materials to get free-standing binderless electrodes suitable for high power/high energy density systems. Studying thoroughly the properties of highly concentrated solutions such as aqueous 14 M LiCl, which are very suitable for different types of supercapacitive devices, combined with profound analyses of the properties of hybrid electrodes, will pave the way for a rational design of very effective devices for energy storage and conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advanced Control and Protection system Design Methods for Modular HTGRs

The project supported the Nuclear Regulatory Commission (NRC) in identifying and evaluating the regulatory implications concerning the control and protection systems proposed for use in the Department of Energy's (DOE) Next-Generation Nuclear Plant (NGNP). The NGNP, using modular high-temperature gas-cooled reactor (HTGR) technology, is to provide commercial industries with electricity and high-temperature process heat for industrial processes such as hydrogen production. Process heat temperatures range from 700 to 950 C, and for the upper range of these operation temperatures, the modular HTGR is sometimes referred to as the Very High Temperature Reactor or VHTR. Initial NGNP designs are for operation in the lower temperature range. The defining safety characteristic of the modular HTGR is that its primary defense against serious accidents is to be achieved through its inherent properties of the fuel and core. Because of its strong negative temperature coefficient of reactivity and the capability of the fuel to withstand high temperatures, fast-acting active safety systems or prompt operator actions should not be required to prevent significant fuel failure and fission product release. The plant is designed such that its inherent features should provide adequate protection despite operational errors or equipment failure. Figure 1 shows an example modular HTGR layout (prismatic core version), where its inlet coolant enters the reactor vessel at the bottom, traversing up the sides to the top plenum, down-flow through an annular core, and exiting from the lower plenum (hot duct). This research provided NRC staff with (a) insights and knowledge about the control and protection systems for the NGNP and VHTR, (b) information on the technologies/approaches under consideration for use in the reactor and process heat applications, (c) guidelines for the design of highly integrated control rooms, (d) consideration for modeling of control and protection system designs for VHTR, and (e) input for developing the bases for possible new regulatory guidance to assist in the review of an NGNP license application. This NRC project also evaluated reactor and process heat application plant simulation models employed in the protection and control system designs for various plant operational modes and accidents, including providing information about the models themselves, and the appropriateness of the application of the models for control and protection system studies. A companion project for the NRC focused on the potential for new instrumentation that would be unique to modular HTGRs, as compared to light-water reactors (LWRs), due to both the higher temperature ranges and the inherent safety features.

08 HYDROGEN↗

Techno-economic Analysis of an Integrated Gasification Direct-Fired Supercritical CO2 Power Cycle

This presentation describes recent systems studies of a coal-fueled, oxy-fired direct supercritical CO2 (sCO2) power cycle, which inherently captures carbon for storage (CCS). In this plant, coal is gasified in an entrained flow gasifier, the syngas is cleaned and burned with oxygen and diluent sCO2 in the cycle’s oxy-combustor. This is followed by turbine expansion and recuperation of thermal energy in the exhaust. After water is condensed from the working fluid, some of the CO2 is exhausted for CCS, and the balance is compressed and heated in the recuperator for return to the combustor. The conceptual design and system model for the plant are discussed, including thermal integration between the sCO2 cycle and the gasifier, and optimization of the overall plant configuration and operating conditions. The capital cost, operating expenses, and cost of electricity (COE) are also estimated. Results show improved efficiency and COE relative to IGCC plants with CCS.

Weiland, Nathan↗

Marine ARM GPCI Investigation of Clouds Bridge Display Field Campaign Report

At the beginning of the U.S. Department of Energy (DOE) Marine Atmospheric Radiation Measurement (ARM) Climate Research Facility Global Energy and Water Experiment (GEWEX) Cloud System Study (GCSS) Pacific Cross-Section Intercomparison (GPCI) Investigation of Clouds (MAGIC) experiment, we recognized that the crew on the ship’s bridge would like to see a display of the meteorological data that was being collected. While a display on the bridge would be marginally useful to the science, it was decided to make a display for the bridge. A display was programmed in Lab View and a personal computer (PC) was set up in the bridge. This remained in operation until the ship went to dry dock for upgrades and service. Part of the upgrade was a new meteorological system for the ship. After this time there was no need for the ARM display and so it was not re-installed for the remainder of the program.

54 ENVIRONMENTAL SCIENCES↗

A Machine Learning Initializer for Newton-Raphson AC Power Flow Convergence

Power flow computations are fundamental to many power system studies. Obtaining a converged power flow case is not a trivial task especially in large power grids due to the non-linear nature of the power flow equations. One key challenge is that the widely used Newton based power flow methods are sensitive to the initial voltage magnitude and angle estimates, and a bad initial estimate would lead to non-convergence. This paper addresses this challenge by developing a random-forest (RF) machine learning model to provide better initial voltage magnitude and angle estimates towards achieving power flow convergence. This method was implemented on a real ERCOT 6102 bus system under various operating conditions. By providing better Newton-Raphson initialization, the RF model precipitated the solution of 2,106 cases out of 3,899 non-converging dispatches. These cases could not be solved from flat start or by initialization with the voltage solution of a reference case. Finally, results obtained from the RF initializer performed better when compared with DC power flow initialization, Linear regression, and Decision Trees.

random forest↗

Chemical significance of x-ray photoelectron spectroscopy binding energy shifts: A Perspective

The principal intent of this Perspective is to review the mechanisms that are responsible for the shifts of binding energies, ΔBE, observed in x-ray photoelectron spectroscopy (XPS) measurements and so to relate the shifts to the electronic structure and the chemical bonding in the systems studied. To achieve this goal, several theoretical considerations are necessary beyond just the calculation of XPS BEs. Though briefly discussed here, we are not primarily interested in absolute values of BE or quantitation using relative intensities. Within the molecular orbital (MO) theory framework, it is shown that the analysis of orbital properties is critical for the correct interpretation of XPS. In particular, rigorous definitions are given for the initial state and final state contributions to BEs and to BE shifts, ΔBE. It is first shown how the BEs of core levels are related to the electronic structure by consideration of the BEs for a model atomic system to establish the origins and magnitudes of BE shifts. The mechanisms established for the model system are then applied to a review of XPS measurements and MO theory on a set of real examples. An important focus of the paper is to demonstrate that, in many cases, initial state mechanisms allow for a definitive interpretation of the XPS BE shifts and that an important role of theory is to provide qualitative explanations rather than quantitative agreement with XPS measurements. The mechanisms established are a guide to the interpretation of XPS measurements and consideration of these mechanisms may suggest additional calculations that would be useful. It is concluded that there is still a bright future for the coupling of ab initio MO theory with XPS measurements.

Materials Science↗

Compatibility Of U 3 Si 2 Fuel With Zr, FeCrAl and SiC/SiC Based Cladding

U 3 Si 2 fuel with FeCrAl or SiC/SiC composite cladding is being considered as an advanced concept and accident tolerant fuel (ATF) system for light water reactors. Understanding their chemical compatibility under operational and accident conditions is fundamental to predicting behavior and fuel qualification. In the present work, experimental determination of interactions and thermodynamic and first principle calculation methods were employed to assess U 3 Si 2 compatibility with novel cladding of FeCrAl-alloys and SiC composites, and were contrasted with compatibility with Zircaloy-4. Diffusion-couple experiments were performed to simulate fuelcladding conditions and the samples were subjected to characterization by scanning electron microscopy and x-ray diffraction. Thermodynamic calculations, based in part on newly determined thermodynamic properties, were used to predict the equilibrium state of the studied systems and to interpret experimental results. First principles calculations using density functional theory were employed to obtain incorporation energies for carbon, iron and uranium in U 3 Si 2 , α- Fe, and SiC structures. Together, the experimental and modeling results have allowed evaluation of the nature of interactions in the fuel-cladding systems.

36 MATERIALS SCIENCE↗

Effect of Grain Boundary Misorientation on Spall Strength in Ta via Shock-Free Simulations with Relatively Few Atoms

A suite of 37 molecular dynamics simulations is conducted at two system sizes to systematically characterize the role of grain boundary (GB) misorientation on spall strength in pure BCC tantalum (Ta). The systems studied consist of bicrystals with a single [110] symmetric tilt grain boundary. Two loading conditions are compared: (i) homogeneous extension under uniaxial strain simulated in this study and (ii) piston/flyer impact of sample, which induces heterogeneous deformation via shockwave propagation along the length of the sample. The piston/flyer impact is taken from the literature and run on the same set of GB misorientation angles using LAMMPS. The major finding here is that both methods result in similar spall strength predictions, but the homogeneous extension method generally requires two to three orders of magnitude fewer atoms and similar reductions in computational costs. Spall strength results systematically overpredict using this method, by about 10% for the dataset three orders of magnitude smaller than piston/flyer simulations, and 5% for the dataset two orders of magnitude smaller. Lastly, the effect of system size and pre-compression magnitude on spall strength is systematically characterized.

36 MATERIALS SCIENCE↗

Interconnection of Distributed Energy Resources in the Indian Context: IEEE 1547-2018 Adaptation for Locally-Appropriate Grid Code Development

The rapid growth of distributed energy resources (DERs) in India and ambitious renewable energy goals set forth by the Indian government have created the need for appropriate distribution interconnection standards to ensure continued system stability, reliability, and resilience. Existing DER interconnection codes in India, at the time of publishing this report, lack many of the critical grid support functionalities for DERs which may protect bulk system stability, such as event ride-through provisions, frequency droop control, or appropriate trip thresholds given the increasing importance of distributed generation. The formal adoption of IEEE 1547-2018 by the Bureau of Indian Standards (BIS) marks a significant step towards achieving appropriate interconnection of DERs, though the implementation of such a standard must be accompanied with careful consideration of the current codes, regulations, and operation of the Indian power system. Studies on the performance of the functionalities within 1547-2018, which properly incorporate local operating conditions, can inform decisions related to the adoption and adaptation of the clauses present in the standard. This report outlines several of these key considerations for stakeholders and provides analyses illustrating the performance of grid support functionalities on typical Indian distribution feeders.

1547↗

System-Level Efficiency Study of Modular DC/DC and Fuel Cell Stack Series–Parallel Configurations

This paper presents a system-level efficiency study of modular DC/DC converter and fuel cell stack configurations under series, parallel, and series–parallel connections. The investigation considers selected DC/DC converter topologies, including isolated and non-isolated architectures, boost, non-inverting buck-boost, and resonant converters, integrated with commercially available fuel cell stacks, including the Accelera FCE150, Ballard FCgen-HPS, and Toyota TFCM2. DC/DC converter modules are evaluated in modular configurations rated at 60 kW and 90 kW and two distinct output voltage ranges, specifically 580–730V and 780–930V, examining how different interconnection schemes impact overall system efficiency. The converters are evaluated under full load (100%), partial load (66%), and light load (33%) conditions, providing a comprehensive assessment of efficiency and operational characteristics across varying power demands. Approximately two-thousand efficiency data points are obtained from laboratory prototype–level component measurements and validated design evaluations across multiple converter topologies, modular configurations, voltage ranges, and load conditions, providing a robust dataset for comparative system-level efficiency analysis. The results highlight the effects of modularity and topology selection on system-level efficiency, offering a “playbook” framework for designers to select appropriate DC/DC converter arrangements and fuel cell stack connections for series, parallel, or hybrid configurations based on efficiency considerations.

DC/DC↗

Effects of ionomer morphology on oxygen reduction on Pt

In this paper, the oxygen reduction reaction (ORR) at the interface between platinum and Nafion 1100 equivalent weight was studied as a function of temperature (20–80 °C), humidity (10–100%), scan rate, the manner in which Nafion film was deposited, and the state of the Pt surface using ultramicroelectrodes employing cyclic voltammetry and chronoamperometry. ORR on smooth electrodes was strongly inhibited under specific conditions dependent on temperature, humidity, and scan rate. From the data presented, we postulate that dynamic changes in the molecular structure of the ionomer at the platinum interface result in differences in ORR voltammetry for films prepared and equilibrated under different conditions. The lack of similar changes for rough, platinized electrodes has been attributed to differences in initial ionomer structure and a higher energy barrier for ionomer restructuring. Finally, these model system studies yield insight into the ionomer-catalyst interface of particular interest for polymer electrolyte fuel cells.

14 SOLAR ENERGY↗

Functionality and operation of fluoroscopic automatic brightness control/automatic dose rate control logic in modern cardiovascular and interventional angiography systems: A Report of Task Group 125 Radiography/Fluoroscopy Subcommittee, Imaging Physics Committee, Science Council

Task Group 125 (TG 125) was charged with investigating the functionality of fluoroscopic automatic dose rate and image quality control logic in modern angiographic systems, paying specific attention to the spectral shaping filters and variations in the selected radiologic imaging parameters. The task group was also charged with describing the operational aspects of the imaging equipment for the purpose of assisting the clinical medical physicist with clinical set-up and performance evaluation. Although there are clear distinctions between the fluoroscopic operation of an angiographic system and its acquisition modes (digital cine, digital angiography, digital subtraction angiography, etc.), the scope of this work was limited to the fluoroscopic operation of the systems studied. The use of spectral shaping filters in cardiovascular and interventional angiography equipment has been shown to reduce patient dose. If the imaging control algorithm were programmed to work in conjunction with the selected spectral filter, and if the generator parameters were optimized for the selected filter, then image quality could also be improved. Although assessment of image quality was not included as part of this report, it was recognized that for fluoroscopic imaging the parameters that influence radiation output, differential absorption, and patient dose are also the same parameters that influence image quality. Therefore, this report will utilize the terminology ''automatic dose rate and image quality'' (ADRIQ) when describing the control logic in modern interventional angiographic systems and, where relevant, will describe the influence of controlled parameters on the subsequent image quality. A total of 22 angiography units were investigated by the task group and of these one each was chosen as representative of the equipment manufactured by GE Healthcare, Philips Medical Systems, Shimadzu Medical USA, and Siemens Medical Systems. All equipment, for which measurement data were included in this report, was manufactured within the three year period from 2006 to 2008. Using polymethylmethacrylate (PMMA) plastic to simulate patient attenuation, each angiographic imaging system was evaluated by recording the following parameters: tube potential in units of kilovolts peak (kVp), tube current in units of milliamperes (mA), pulse width (PW) in units of milliseconds (ms), spectral filtration setting, and patient air kerma rate (PAKR) as a function of the attenuator thickness. Data were graphically plotted to reveal the manner in which the ADRIQ control logic responded to changes in object attenuation. There were similarities in the manner in which the ADRIQ control logic operated that allowed the four chosen devices to be divided into two groups, with two of the systems in each group. There were also unique approaches to the ADRIQ control logic that were associated with some of the systems, and these are described in the report. The evaluation revealed relevant information about the testing procedure and also about the manner in which different manufacturers approach the utilization of spectral filtration, pulsed fluoroscopy, and maximum PAKR limitation. This information should be particularly valuable to the clinical medical physicist charged with acceptance testing and performance evaluation of modern angiographic systems.

61 RADIATION PROTECTION AND DOSIMETRY↗

Understanding the Phase of Responsivity and Noise Sources in Frequency-Domain Multiplexed Readout of Transition Edge Sensor Bolometers

Abstract Cosmic microwave background (CMB) experiments have deployed focal planes with $$\mathcal {O}(10^{4})$$ O ( 10 4 ) transition edge sensor (TES) bolometers cooled to sub-Kelvin temperatures by multiplexing the readout of many TES channels onto a single pair of wires. Digital Frequency-domain Multiplexing (DfMux) is a multiplexing technique used in many CMB polarization experiments, such as the Simons Array, SPT-3 G, and EBEX. The DfMux system studied here uses LC filters with resonant frequencies ranging from 1.5 to 4.5 MHz connected to an array of TESs. Each detector has an amplitude-modulated carrier tone at the resonant frequency of its accompanying LC resonator. The signal is recovered via quadrature demodulation where the in-phase (I) component of the demodulated current is in phase with the complex admittance of the circuit and the quadrature (Q) component is orthogonal to I. Observed excess current noise in the Q component is consistent with fluctuations in the resonant frequency. This noise has been shown to be non-orthogonal to the phase of the detector’s responsivity. We present a detailed analysis of the phase of responsivity of the TES and noise sources in our DfMux readout system. Further, we investigate how modifications to the TES operating resistance and bias frequency can affect the phase of noise relative to the phase of the detector responsivity, using data from Simons Array to evaluate our predictions. We find that both the phase of responsivity and phase of noise are functions of the two tuning parameters, which can be purposefully selected to maximize signal-to-noise (SNR) ratio.

47 OTHER INSTRUMENTATION↗

Fracton superfluid hydrodynamics

We examine the hydrodynamics of systems with spontaneously broken multipolar symmetries using a systematic effective field theory. We focus on the simplest nontrivial setting: a system with charge and dipole symmetry, but without momentum conservation. When no symmetries are broken, our formalism reproduces the quartic subdiffusion (ω ~ –ik 4 ) characteristic of “fracton hydrodynamics” with conserved dipole moment. Our formalism also captures spontaneous breaking of charge and/or dipole symmetry. When charge symmetry is spontaneously broken, the hydrodynamic modes are quadratically propagating and quartically relaxing (ω ~ ±k 2 – ik 4 ). When the dipole symmetry is spontaneously broken but the charge symmetry is preserved, then we find quadratically relaxing (diffusive) transverse modes, plus another mode which, depending on parameters, may be either purely diffusive (ω ~ – ik 2 ) or quadratically propagating and quadratically relaxing (ω ~ ± k 2 – ik 2 ). Furthermore, our work provides concrete predictions that may be tested in near-term cold atom experiments, and also lays out a general framework that may be applied to study systems with spontaneously broken multipolar symmetries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗