Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

TiO2 Nanotubes with a ZnO Thin Energy Barrier for Improved Current Efficiency of CdSe Quantum-Dot-Sensitized Solar Cells

This paper reports the formation of a thin ZnO energy barrier between a CdSe quantum dot (Q dots) sensitizer and TiO{sub 2} nanotubes (TONTs) for improved current efficiency of Q dot-sensitized solar cells. The formation of a ZnO barrier between TONTs and the Q dot sensitizer increased the short-circuit current under illumination and also reduced the dark current in a dark environment. The power conversion efficiency of Q dot-sensitized TONT solar cells increased by 25.9% in the presence of the ZnO thin layer due to improved charge-collecting efficiency and reduced recombination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dopant location identification in Nd3+ doped TiO2 nanoparticles

Large band gap semiconductors are typically doped in order to enhance their photocatalytic, photovoltaic, and other chemical and optoelectronic properties. The identification of dopant position and its local environment are essential to explore the effect of doping. X ray techniques, including extended x ray absorption fine structure, x ray photoelectron spectroscopy, and x ray diffraction, were performed to analyze the Nd (0 to 1.5 at. %) dopant location and the structural changes associated with the doping in anatase TiO{sub 2} nanoparticles, which were synthesized by metalorganic chemical vapor deposition. Nd ions were determined to have a trivalent chemical state and substitute for Ti{sup 4+} in the TiO{sub 2} structure. The substitutional Nd{sup 3+} ions cause anatase lattice expansion along c direction with a maximum value of 0.15 {angstrom} at 1.5% Nd doping level and the local structure of the dopants changes towards rutile like configuration. The lengths of the nearest neighbor Nd-O and Nd-Ti bonds increase by 0.5-0.8 {angstrom} compared to their counterparts in the pure TiO{sub 2} host structure. The substitutional nature of Nd{sup 3+} dopants explains why they are efficient not only for charge carrier separation but also for visible light absorption in TiO{sub 2}.

36 MATERIALS SCIENCE↗

Atomic structure of nanometer-sized amorphous TiO[subscript 2]

Amorphous titania (TiO{sub 2}) is an important precursor for synthesis of single-phase nanocrystalline anatase. We synthesized amorphous titania by hydrolysis of titanium ethoxide at the ice point. Transmission electron microscopy examination and nitrogen gas adsorption indicated that the particle size of the synthesized titania is -2 nm. Synchrotron wide-angle x-ray scattering (WAXS) was used to probe the atomic correlations in this amorphous sample. Atomic pair-distribution function (PDF) derived from Fourier transform of the WAXS data was used for reverse Monte Carlo (RMC) simulations of the atomic structure of the amorphous TiO{sub 2} nanoparticles. Molecular-dynamics simulations were used to generate input structures for the RMC. X-ray-absorption spectroscopy (XAS) simulations were used to screen candidate structures obtained from the RMC by comparing with experimental XAS data. The structure model that best describes both the WAXS and XAS data shows that amorphous TiO{sub 2} particles consist of a highly distorted shell and a small strained anataselike crystalline core. The average coordination number of Ti is 5.3 and most Ti-O bonds are populated around 1.940 {angstrom}. Relative to bulk TiO{sub 2}, the reduction in the coordination number is primarily due to the truncation of the Ti-O octahedra at the amorphous nanoparticle surface and the shortening of the Ti-O bond length to the bond contraction in the distorted shell. The pre-existence of the anataselike core may be critical to the formation of single-phase nanocrystalline anatase in crystallization of amorphous TiO{sub 2} upon heating.

43 PARTICLE ACCELERATORS↗

Atomic Control of Conductivity Versus Ferromagnestism in Wide-Gap Oxides via Selective Doping: V, Nb, Ta in Anatase TiO2

We identify two general types of electronic behaviors for transition-metal impurities that introduce excess electrons in oxides. (1) The dopants introduce resonant states inside the host conduction band and produce free electrons; (2) the dopants introduce a deep gap state that carries a magnetic moment. By combining electronic structure calculations, thermodynamic simulations, and percolation theory, we quantify these behaviors for the case of column V-B dopants in anatase TiO{sub 2}. Showing behavior (1), Nb and Ta dopants can convert the insulator TiO{sub 2} into a transparent conductor. Showing behavior (2), V dopants could convert nonmagnetic TiO{sub 2} into a ferromagnet. Whether a dopant shows behavior (1) or (2) is encoded in its atomic d orbital energy.

36 MATERIALS SCIENCE↗

Design of Narrow-Gap TiO2: A Passivated Codoping Approach for Enhanced Photoelectrochemical Activity

To improve the photoelectrochemical activity of TiO{sub 2} for hydrogen production through water splitting, the band edges of TiO{sub 2} should be tailored to match with visible light absorption and the hydrogen or oxygen production levels. By analyzing the band structure of TiO{sub 2} and the chemical potentials of the dopants, we propose that the band edges of TiO{sub 2} can be modified by passivated codopants such as (Mo+C) to shift the valence band edge up significantly, while leaving the conduction band edge almost unchanged, thus satisfying the stringent requirements. The design principle for the band-edge modification should be applicable to other wide-band-gap semiconductors.

14 SOLAR ENERGY↗

TiO{sub 2} nanotube arrays for photocatalysis: Effects of crystallinity, local order, and electronic structure

To furnish insight into correlations of electronic and local structure and photoactivity, arrays of short and long TiO{sub 2} nanotubes were synthesized by electrochemical anodization of Ti foil, followed by thermal treatment in O{sub 2} (oxidizing), Ar (inert), and H{sub 2} (reducing) environments. The physical and electronic structures of these nanotubes were probed with x-ray diffraction, scanning electron microscopy, and synchrotron-based x-ray absorption spectroscopy, and correlated with their photocatalytic properties. The photocatalytic activity of the nanotubes was evaluated by monitoring the degradation of methyl orange under UV-VIS light irradiation. Results show that upon annealing at 350 °C all as-anodized amorphous TiO{sub 2} nanotube samples partially transform to the anatase structure, with variations in the degree of crystallinity and in the concentration of local defects near the nanotubes' surface (∼5 nm) depending on the annealing conditions. Degradation of methyl orange was not detectable for the as-anodized TiO{sub 2} nanotubes regardless of their length. However, the annealed long nanotubes demonstrated detectable catalytic activity, which was more significant with the H{sub 2}-annealed nanotubes than with the Ar- and O{sub 2}-annealed nanotube samples. This enhanced photocatalytic response of the H{sub 2}-annealed long nanotubes relative to the other samples is positively correlated with the presence of a larger concentration of lattice defects (such as Ti{sup 3+} and anticipated oxygen vacancies) and a slightly lower degree of crystallinity near the nanotube surface. These physical and electronic structural attributes impact the efficacy of visible light absorption; moreover, the increased concentration of surface defects is postulated to promote the generation of hydroxyl radicals and thus accelerate the photodegradation of the methyl orange. The information obtained from this study provides unique insight into the role of the near-surface electronic and defect structure, crystal structure, and the local chemical environment on the photocatalytic activity and may be employed for tailoring the materials' properties for photocatalysis and other energy-related applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials Data on TiO2 (SG:160) by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on TiO2 (SG:62) by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗