Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Effect of thermal annealing on the emission properties of heterostructures containing a quantum-confined GaAsSb layer

Heterostructures containing single GaAsSb/GaAs quantum wells and bilayer GaAsSb/InGaAs quantum wells are produced by metal-organic vapor-phase epitaxy at atmospheric pressure. The growth temperature of the quantum-confined layers is 500–570°C. The structural quality of the samples and the quality of heterointerfaces of the quantum wells are studied by the high-resolution transmission electron microscopy of cross sections. The emission properties of the heterostructures are studied by photoluminescence measurements. The structures are subjected to thermal annealing under conditions chosen in accordance with the temperature and time of growth of the upper cladding p-InGaP layer during the formation of GaAs/InGaP laser structures with an active region containing quantum-confined GaAsSb layers. It is found that such heat treatment can have a profound effect on the emission properties of the active region, only if a bilayer GaAsSb/InGaAs quantum well is formed.

36 MATERIALS SCIENCE↗

Formation and reconstruction of Se nanoislands at the surface of thin epitaxial ZnSe layers grown on GaAs substrates

Strained epitaxial ZnSe layers are grown on GaAs substrates by the method of vapor-phase epitaxy from metal-organic compounds. It is found that Se nanoislands with a density of 10{sup 8} to 10{sup 9} cm{sup –2} are formed at the surface of such layers. It is established that an increase in the size of Se islands and a decrease in their density take place after completion of growth. Annealing in a H{sub 2} atmosphere at a temperature higher than 260°C leads to the disappearance of Se islands and to a decrease in the surface roughness. It is shown that annealing does not lead to deterioration of the structural perfection of the epitaxial ZnSe films; rather, annealing gives rise to a decrease in the intensity of impurity–defect luminescence and to an increase in the intensity of intrinsic radiation near the bottom of the exciton band.

36 MATERIALS SCIENCE↗

Bimodality in Arrays of In{sub 0.4}Ga{sub 0.6}As Hybrid Quantum-Confined Heterostructures Grown on GaAs Substrates

Hybrid quantum-confined heterostructures grown by metal-organic vapor-phase epitaxy (MOVPE) via the deposition of In{sub 0.4}Ga{sub 0.6}As layers with various nominal thicknesses onto vicinal GaAs substrates are studied by photoluminescence spectroscopy and transmission electron microscopy. The photoluminescence spectra of these structures show the superposition of two spectral lines, which is indicative of the bimodal distribution of the size and/or shape of light-emitting objects in an array. The dominant spectral line is attributed to the luminescence of hybrid “quantum well–dot” nanostructures in the form of a dense array of relatively small quantum dots (QDs) with weak electron and hole localization. The second, lower intensity line is attributed to luminescence from a less dense array of comparatively larger QDs. Analysis of the behavior of the spectral line intensities at various temperatures showed that the density of larger QDs grows with increasing thickness of the InGaAs layer.

36 MATERIALS SCIENCE↗

III–V Solar Cells Grown on Unpolished and Reusable Spalled Ge Substrates

Substrate reuse offers a promising route toward enabling high-efficiency III-V solar cells to become cost-competitive for one-sun terrestrial applications. In this study, Ge films were spalled using an electroplated Ni stressor layer, and the fracture surface was characterized. Initial heteroepitaxial GaAs films grown on spalled Ge substrates by hydride vapor phase epitaxy were found to be single crystal with nearly equivalent growth rates between growth on epi-ready and unpolished spalled Ge substrates. We show the first demonstration of III-V solar cells (GaInAsP, E g ~ 1.7 eV) grown on unpolished spalled Ge substrates to assess the viability of substrate reuse. We demonstrate equivalent performance for a solar cell grown on spalled Ge and on a coloaded epi-ready Ge substrate, despite the residual roughness on the spalled Ge substrate and the lack of any substrate surface preparation. This initial demonstration of combining substrate reuse with the ability to grow III-V solar cells using a high growth rate and high throughput deposition process is a promising step toward low-cost III-V photovoltaics.

14 SOLAR ENERGY↗

Numerical simulations of epitaxial growth process in MOVPE reactor as a tool for design of modern semiconductors for high power electronics

In the present study numerical simulations of epitaxial growth of gallium nitride in Metal Organic Vapor Phase Epitaxy reactor AIX-200/4RF-S is addressed. Epitaxial growth means crystal growth that progresses while inheriting the laminar structure and the orientation of substrate crystals. One of the technological problems is to obtain homogeneous growth rate over the main deposit area. Since there are many agents influencing reaction on crystal area such as temperature, pressure, gas flow or reactor geometry, it is difficult to design optimal process. According to the fact that it's impossible to determine experimentally the exact distribution of heat and mass transfer inside the reactor during crystal growth, modeling is the only solution to understand the process precisely. Numerical simulations allow to understand the epitaxial process by calculation of heat and mass transfer distribution during growth of gallium nitride. Including chemical reactions in numerical model allows to calculate the growth rate of the substrate and estimate the optimal process conditions for obtaining the most homogeneous product.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoconductivity Amplification in a Type-II n-GaSb/InAs/p-GaSb Heterostructure with a Single QW

Significant photocurrent/photoconductivity amplification is observed at low reverse biases in a type-II n-GaSb/InAs/p-GaSb heterostructure with a single quantum well (QW), grown by metal-organic vapor phase epitaxy. A sharp increase in the photocurrent by more than two orders of magnitude occurs under exposure of the heterostructure to monochromatic light with a wavelength of 1.2–1.6 μm (at 77 K) and the application of a reverse bias in the range 5–200 mV. The optical gain depends on the applied voltage and increases to 2.5 × 10{sup 2} at a reverse bias of 800 mV. Theoretical analysis demonstrated that the main role in the phenomenon is played by the screening of the external electric field by electrons accumulated in the deep InAs QW and by the mechanism of the tunneling transport of carriers with a small effective mass. It is shown that the effect under study is common to both isotype and anisotype type-II heterojunctions, including structures with QWs and superlattices.

36 MATERIALS SCIENCE↗

Multilayer Quantum Well–Dot InGaAs Heterostructures in GaAs-based Photovoltaic Converters

GaAs photovoltaic converters containing quantum well-dot (QWD) heterostructures are studied. The QWD properties are intermediate between those of quantum wells (QWs) and quantum dots. The QWDs are obtained by the epitaxial deposition of In{sub 0.4}Ga{sub 0.6}As with a nominal thickness of 8 single layers by metal-organic vapor phase epitaxy. QWDs are a dense array of elastically strained islands that localize carriers in three directions and are formed by a local increase in the indium concentration and/ or InGaAs-layer thickness. There are two quantum-well levels of varied nature in structures with QWDs. These levels are manifested in the spectral characteristics of GaAs photovoltaic converters. A short-wavelength peak with a maximum at around 935 nm is associated with absorption in the residual QW, and the long-wavelength peak (1015–1030 nm) is due to absorption in the QWDs. Investigation by transmission electron microscopy demonstrates that an increase in the number of InGaAs layers leads to stronger elastic stresses, which, in turn, increases the carrier confinement energy in the QWDs and lead to a corresponding long-wavelength shift of the internal quantum efficiency spectrum.

36 MATERIALS SCIENCE↗

Microstructural dependency of optical properties of m-plane InGaN multiple quantum wells grown on 2° misoriented bulk GaN substrates

A non-polar m-plane structure consisting of five InGaN/GaN quantum wells (QWs) was grown on ammonothermal bulk GaN by metal-organic vapor phase epitaxy. Surface step bunches propagating through the QW stack were found to accommodate the 2° substrate miscut towards the -c direction. Both large steps with heights of a few tens of nanometres and small steps between one and a few atomic layers in height are observed, the former of which exhibit cathodoluminescence at longer wavelengths than the adjacent m-plane terraces. This is attributed to the formation of semi-polar facets at the steps on which the QWs are shown to be thicker and have higher Indium contents than those in the adjacent m-plane regions. Discrete basal-plane stacking faults (BSFs) were occasionally initiated from the QWs on the main m-plane terraces, but groups of BSFs were frequently observed to initiate from those on the large steps, probably related to the increased strain associated with the locally higher indium content and thickness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chapter 5: Metamorphic Growth and Multijunction III-V Solar Cells

Metal organic vapor phase epitaxy (MOVPE) has proved to be the primary materials growth technique for low-cost, high-volume III-V multijunction (MJ) solar cells. This chapter shows the typical applications that drive volume production for MJ solar cells using MOVPE. The two commonly used structures for lattice-mismatched MJ solar cells are the upright metamorphic (UMM) structure and the inverted metamorphic (IMM) structure. The chapter discusses the key aspects of reactor technology pertinent to UMM and IMM solar cell growth. The main commercial low-pressure, As/P MOVPE reactor technology are vertical chambers where wafers are held on a planar rotating graphite susceptor, acting to aid the laminar flow or subplanetary rotation used to planarize the growth. The in situ monitoring becomes a critical component when considering lattice-mismatched growth, in particular the measurement of wafer curvature. One may relate the wafer curvature to the net strain at growth temperature through the use of Stoney's equation.

14 SOLAR ENERGY↗

Q-factor of (In,Ga)N containing III-nitride microcavity grown by multiple deposition techniques

A 3λ/2 (In,Ga)N/GaN resonant cavity, designed for ∼415 nm operation, is grown by molecular beam epitaxy and is sandwiched between a 39.5-period (In,Al)N/GaN distributed Bragg reflector (DBR), grown on c-plane GaN-on-sapphire pseudo-substrate by metal-organic vapor phase epitaxy and an 8-period SiO{sub 2}/ZrO{sub 2} DBR, deposited by electron beam evaporation. Optical characterization reveals an improvement in the cavity emission spectral purity of approximately one order of magnitude due to resonance effects. The combination of spectrophotometric and micro-reflectivity measurements confirms the strong quality (Q)-factor dependence on the excitation spot size. We derive simple analytical formulas to estimate leak and residual absorption losses and propose a simple approach to model the Q-factor and to give a quantitative estimation of the weight of cavity disorder. The model is in good agreement with both transfer-matrix simulation and the experimental findings. We point out that the realization of high Q-factor (In,Ga)N containing microcavities on GaN pseudo-substrates is likely to be limited by the cavity disorder.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Auger recombination in In(Ga)Sb/InAs quantum dots

We report on the epitaxial formation of type II In{sub 0.5}Ga{sub 0.5}Sb/InAs and InSb/InAs quantum dot ensembles using metal organic vapor phase epitaxy. Employing scanning tunneling spectroscopy, we determine spatial quantum dot dimensions smaller than the de Broglie wavelength of InGaSb, which strongly indicates a three dimensional hole confinement. Photoluminescence spectroscopy at low temperatures yields an enhanced radiative recombination in the mid-infrared regime at energies of 170–200 meV. This luminescence displays a strong excitation power dependence with a blueshift indicating a filling of excited quantum dot hole states. Furthermore, a rate equation model is used to extract the Auger recombination coefficient from the power dependent intensity at 77 K yielding values of 1.35 × 10{sup −28} cm{sup 6}/s for In{sub 0.5}Ga{sub 0.5}Sb/InAs quantum dots and 1.47 × 10{sup −27} cm{sup 6}/s for InSb/InAs quantum dots, which is about one order of magnitude lower as previously obtained values for InGaSb superlattices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Selective UV radiation detection on the basis of low-dimensional ZnCdS/ZnMgS/GaP and ZnCdS/ZnS/GaP heterostructures

The detecting properties of periodic heterostructures with ZnCdS quantum wells separated by ZnMgS or ZnS barrier layers are studied. Heterostructures are grown on semi-insulating GaP substrates by metal organic vapor-phase epitaxy (MOVPE). On their basis, metal–semiconductor–metal (MSM) diodes with interdigital Schottky contacts 3 μm, distances between them of 3 μm, and a total detector area of 100 × 100 μm are fabricated. The detectors have low dark currents (10{sup –12} A); at low bias voltages, they provide a narrow- band response (full-width at half-maximum of FWHM = 18 nm at a wavelength of 350 nm) which is controlled by the ZnCdS quantum-well composition. As bias is increased to 70 V, the maximum detector sensitivity shifts by a wavelength of 450 nm, which is caused by penetration of the external-bias electric field into the semi-insulating GaP substrate. In this case, the narrow-band response of the detector at a wavelength of 350 nm is retained, i.e., the two-color detection of light is provided.

36 MATERIALS SCIENCE↗

Long wavelength emitting GaInN quantum wells on metamorphic GaInN buffer layers with enlarged in-plane lattice parameter

Metamorphic (i.e., linear composition graded) GaInN buffer layers with an increased in-plane lattice parameter, grown by plasma-assisted molecular beam epitaxy, were used as templates for metal organic vapor phase epitaxy (MOVPE) grown GaInN/GaInN quantum wells (QWs), emitting in the green to red spectral region. A composition pulling effect was observed allowing considerable higher growth temperatures for the QWs for a given In composition. The internal quantum efficiency (IQE) of the QWs was determined by temperature and excitation power density dependent photoluminescence (PL) spectroscopy. An increase in IQE by a factor of two was found for green emitting QWs grown on metamorphic GaInN buffer compared to reference samples grown on standard GaN buffer layers. The ratio of room temperature to low temperature intensity PL of the red emitting QWs were found to be comparable to the PL efficiency of green emitting QWs, both grown on metamorphic GaInN buffers. The excitation density and well width dependence of the IQE indicate a reduction of the quantum confined Stark effect upon growth on GaInN buffer layers with increased in-plane lattice parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electroluminescence in n-GaSb/InAs/p-GaSb Heterostructures with a Single Quantum Well Grown by MOVPE

The electroluminescent characteristics of a type-II n-GaSb/n-InAs/p-GaSb heterostructure with a single deep quantum well grown by metalorganic vapor-phase epitaxy are investigated. The energy-band diagram of the structure and the positions of the electron and heavy-hole energy levels are calculated. The analysis of the current–voltage characteristics demonstrates that the dark current in the structure under study flows via the tunneling mechanism. Intense electroluminescence characterized by a weak temperature dependence was observed in the spectral range of 3–4 μm at T = 77 and 300 K. The main electroluminescence band (hν = 0.40 eV at 77 K) corresponds to direct radiative transitions between electrons from level E{sub 1} in the InAs quantum well and heavy holes from the continuum at the n-GaSb/n-InAs heterointerface. A low-intensity electroluminescence band at hν = 0.27 eV (T = 77 K) originates from indirect (tunneling) transitions from the first electron level in the quantum well to the second level of heavy holes localized in the valence-band “notch” at the n-InAs/p-GaSb heterointerface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development and application of InAsP/InP quantum well infrared detector

InAs{sub x}P{sub 1-x}/InP quantum wells grown using metal organic vapor phase epitaxy are investigated for infrared detector applications. The structural parameters of the QWs are evaluated from high resolution x-ray diffraction. The electronic transition energies measured from surface photo voltage and photoconductivity confirms that these QWs can be used for fabricating IR detectors in the wide wavelength range, i.e. 0.9–1.46 µm by inter-band transitions and 7–18 µm by inter-sub-band transitions. Subsequently the functionality of one such fabricated InAs{sub x}P{sub 1-x}/InPQW detector is verified by measuring the photoluminescence of suitable semiconductor quantum well structure. At the request of all authors of the paper, and with the agreement of the Proceedings Editor, an updated version of this article was published on 24 June 2016. The original version supplied to AIP Publishing contained an error in the Figures 1 and 2 where the right side of the images were cutoff. The error has been corrected in the updated and re-published article.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photovoltaic detector based on type II heterostructure with deep AlSb/InAsSb/AlSb quantum well in the active region for the midinfrared spectral range

Photodetectors for the spectral range 2-4 {mu}m, based on an asymmetric type-II heterostructure p-InAs/AlSb/InAsSb/AlSb/(p, n)GaSb with a single deep quantum well (QW) or three deep QWs at the heterointerface, have been grown by metal-organic vapor phase epitaxy and analyzed. The transport, luminescent, photoelectric, current-voltage, and capacitance-voltage characteristics of these structures have been examined. A high-intensity positive and negative luminescence was observed in the spectral range 3-4 {mu}m at high temperatures (300-400 K). The photosensitivity spectra were in the range 1.2-3.6 {mu}m (T = 77 K). Large values of the quantum yield ({eta} = 0.6-0.7), responsivity (S{sub {lambda}} = 0.9-1.4 A W{sup -1}), and detectivity (D*{sub {lambda}} = 3.5 Multiplication-Sign 10{sup 11} to 10{sup 10} cm Hz{sup 1/2} W{sup -1}) were obtained at T = 77-200 K. The small capacitance of the structures (C = 7.5 pF at V = -1 V and T = 300 K) enabled an estimate of the response time of the photodetector at {tau} = 75 ps, which corresponds to a bandwidth of about 6 GHz. Photodetectors of this kind are promising for heterodyne detection of the emission of quantum-cascade lasers and IR spectroscopy.

36 MATERIALS SCIENCE↗

Composition determination of quaternary GaAsPN layers from single X-ray diffraction measurement of quasi-forbidden (002) reflection

GaAsPN layers with a thickness of 30 nm were grown on GaP substrates with metalorganic vapor phase epitaxy to study the feasibility of a single X-ray diffraction (XRD) measurement for full composition determination of quaternary layer material. The method is based on the peak intensity of a quasi-forbidden (002) reflection, which is shown to vary with changing arsenic content for GaAsPN. The method works for thin films with a wide range of arsenic contents and shows a clear variation in the reflection intensity as a function of changing layer composition. The obtained thicknesses and compositions of the grown layers are compared with accurate reference values obtained by Rutherford backscattering spectroscopy combined with nuclear reaction analysis measurements. Based on the comparison, the error in the XRD defined material composition becomes larger with increasing nitrogen content and layer thickness. This suggests that the dominating error source is the deteriorated crystal quality due to the nonsubstitutional incorporation of nitrogen into the crystal lattice and strain relaxation. The results reveal that the method overestimates the arsenic and nitrogen content within error margins of about 0.12 and about 0.025, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron-transmuted carbon-14 in neutron-irradiated GaN: Compensation of DX-like center

The transmuted-C related luminescence and net carrier concentration are studied by combining photoluminescence, liquid scintillation, and Raman scattering. GaN single crystal films grown by metalorganic-vapor-phase epitaxy are irradiated with fast and thermal neutrons at fluxes of 3.9 × 10{sup 13} cm{sup −2}s{sup −1} and 8.15 × 10{sup 13} cm{sup −2}s{sup −1}, respectively. Irradiation time is 48 hours. The calculated {sup 72}Ge and {sup 14}C concentrations are 1.24 × 10{sup 18} cm{sup −3} and 1.13 × 10{sup 18} cm{sup −3}, respectively. The transmuted {sup 14}C is detected by the liquid scintillation method to survey β-rays emitted in the process of {sup 14}C decays from {sup 14}N. Tritium ({sup 3}H) is also emitted by a (n,t) reaction of {sup 14}N due to the neutron irradiation above 4.5 MeV. Photoluminescence relating to C, DX-like center of Ge and yellow luminescence band are observed in 1000 °C annealed NTD-GaN. The free electron concentration estimated from Raman scattering is 4.97 × 10{sup 17} cm{sup −3}. This value is lower than that from the transmuted Ge concentration, suggesting the compensation due to the transmuted {sup 14}C acceptors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗