Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Effect of Antagonistic Binder–Catalyst Interactions on Catalytic Activity in Lithium–Sulfur Batteries

Lithium-sulfur (Li-S) batteries are a promising next-generation energy storage solution, as they can reduce reliance on critical transition metals while offering high energy densities. However, their deployment is hindered by low sulfur utilization and the formation/diffusion of lithium polysulfides (LiPSs). While transition-metal catalysts and polymeric binders have been independently developed to enhance redox kinetics and LiPS adsorption, their mutual compatibility has remained largely unexplored. We show here that binder-catalyst interactions can significantly impact catalytic performance. Employing TiO 2 as a generic catalyst, the electrochemical performance is shown to depend strongly on the binder environment. TiO 2 paired with lithiated polyacrylic acid (LiPAA) shows benign interactions, resulting in enhanced cycle life. In contrast, pairing TiO 2 with protonated PAA produces antagonistic interactions that hinder Li 2 S growth. A mechanistic analysis unveils that the carboxylic H atom in PAA promotes COO − coordination to Ti sites, occupying catalytic centers and suppressing LiPS adsorption, increasing charge transfer and diffusion resistances. This phenomenon is observed across multiple catalysts, indicating that COOH-functionalized binders may broadly hinder catalytic activity. Overall, this study underscores the need for holistic cathode design and identifies binder-catalyst compatibility as an important parameter for high-performance Li-S batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Enhancing NO Reduction by CO Over NiO/CeO 2 Catalyst by Optimizing the Metal Oxide–Support Interaction

Noble metal catalysts are widely used in three-way catalysts (TWCs) due to their high efficiency, but their scarcity and high cost drive the need for effective, low-cost alternatives. Here, in this work, a series of NiO/CeO 2 catalysts were engineered by modulating the OH content and crystallite size of the CeO 2 support. This approach yielded Ni species ranging from isolated single atoms to small clusters and larger aggregates, with varied NiO/CeO 2 interaction strengths. Evaluation of their performance in NO reduction by CO, CO oxidation, and the water–gas shift reaction revealed that the NiO/CeO 2 -300 catalyst, featuring small CeO 2 crystallites and highly dispersed NiO clusters, delivered superior activity for NO reduction and CO oxidation. It was demonstrated that small NiO clusters, due to their efficient CO adsorption and activation, were more active than Ni single atoms. Furthermore, the presence of water was found to influence the catalyst stability, with NiO clusters less stable than single atoms likely due to the hydroxylation effect leading to the formation of Ni(OH) 2 . Oxygen storage capacity measurements revealed that performance was governed by a combination of CeO 2 crystallite size and the abundance of NiO/CeO 2 interfaces. These findings demonstrated that the catalytic performance of Ni/CeO 2 systems could be maximized by optimizing the Ni nanostructure and its interaction with CeO 2 support, positioning them as a promising, multifunctional nonprecious alternative for three-way catalysis application.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Genesis of Active Pt/CeO 2 Catalyst for Dry Reforming of Methane by Reduction and Aggregation of Isolated Platinum Atoms into Clusters

Atomically dispersed metal catalysts offer the advantages of efficient metal utilization and high selectivities for reactions of technological importance. Such catalysts have been suggested to be strong candidates for dry reforming of methane (DRM), offering prospects of high selectivity for synthesis gas without coke formation, which requires ensembles of metal sites and is a challenge to overcome in DRM catalysis. However, investigations of the structures of isolated metal sites on metal oxide supports under DRM conditions are lacking, and the catalytically active sites remain undetermined. Data characterizing the DRM reaction-driven structural evolution of a cerium oxide- supported catalyst, initially incorporating atomically dispersed platinum, and the corresponding changes in catalyst performance are reported. X-ray absorption and infrared spectra show that the reduction and agglomeration of isolated cationic platinum atoms to form small platinum clusters/nanoparticles are necessary for DRM activity. Density functional theory calculations of the energy barriers for methane dissociation on atomically dispersed platinum and on platinum clusters support these observations. Here the results emphasize the need for in-operando experiments to assess the active sites in such catalysts. The inferences about the catalytically active species are suggested to pertain to a broad class of catalytic conversions involving the rate-limiting dissociation of light alkanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Layer structured bifunctional monolith catalysts for energy-efficient conversion of CO 2 to dimethyl ether

A monolith supported bifunctional catalyst for the direct conversion of CO 2 to dimethyl ether was developed and evaluated. The catalyst consists of a layer structured configuration, in which a CuO/ZnO/ZrO 2 component for methanol synthesis using CO 2 as feedstock and a Ferrierite zeolite component for the subsequent dehydration reaction are washcoated onto the channel surfaces of a metallic monolith substrate as two consecutive layers. The metal substrate provides heat conduction to regulate the catalyst bed temperature. The layered configuration significantly improves the synergistic effects of the two components, resulting in a 20% increase in the productivity for dimethyl ether at 240 °C as compared with the conventional catalysts with the two components being blended in various levels of proximity. Furthermore, the layer structured design minimizes the undesirable interaction between the two components and drastically improves the on-stream durability of the catalyst. No activity decline was observed in a 146-h performance test.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Propane Dehydrogenation on Single-Site [PtZn4] Intermetallic Catalysts

Propane dehydrogenation (PDH) is a commercial propylene production technology that has received much attention, but high reaction temperature results in decrease of propylene selectivity and catalyst stability. This paper describes a single-site [PtZn 4 ] catalyst by assembling atomically ordered intermetallic alloy (IMA) as a selective and ultrastable PDH catalyst. The catalyst enables more than 95% propylene selectivity from 520 to 620 oC. No obvious deactivation is observed within 160-hours test, superior to PtSn/Al 2 O 3 and state-of-the-art Pt-based catalysts. Additionally, based on in situ X-ray absorption fine-structure, X-ray photoelectron spectroscopy measurements and density functional theory calculations, we reveal that the surface [PtZn 4 ] ensembles in PtZn IMAs serve as the key active site structures, wherein the geometry-isolated and electron-rich Pt1 site in [PtZn 4 ] ensembles readily promotes the first and second C–H cleavage of propane, but inhibits further dehydrogenation of surface-bounded propylene. This significantly improves the selectivity and stability by prohibiting coke side reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quantitative Cu Counting Methodologies for Cu/SSZ-13 Selective Catalytic Reduction Catalysts by Electron Paramagnetic Resonance Spectroscopy

Here, two Cu/SSZ-13 selective catalytic reduction (SCR) catalysts with distinct Si/Al ratios and isolated Z2Cu and ZCuOH distributions are prepared for in situ electron paramagnetic resonance (EPR) spectroscopic studies. These in situ studies include dehydration, titration of dehydrated samples with NO+O 2 and NH 3 , titration of NH 3 saturated samples with NO+O 2 , and finally steady-state standard NH 3 -SCR reaction. During dehydration, EPR active hydrated ZCuOH loses H 2 O ligands and becomes EPR silent due to a pseudo Jahn-Teller effect; a portion of ZCuOH also undergoes autoreduction to ZCu(I) species, a process that also induces EPR invisibility. During NO+O 2 treatment of dehydrated samples, ZCu(I) species are oxidized to Cu(II)-NO 3 - species, regaining EPR visibility. During NH3 titration, EPR silent dehydrated ZCuOH can also regain EPR visibility by coordinating with NH 3 ligands. During NO+O 2 titration of NH 3 -saturated samples, EPR active Cu contents first decrease due to Cu(II) reduction to Cu(I), and then increase due to Cu(II)-NO 3 - species formation. However, the Cu(II)-NO 3 - formation chemistry is substantially slower for the Si/Al = 36 catalyst. In steady-state SCR studies, the EPR active content decreases with increasing temperature in the kinetically controlled low-temperature regime and becomes largely invariant in mass-transfer limited regime. Importantly, Cu sites in the SCR more active Si/Al = 6 catalyst display substantially higher EPR visibility than the SCR less active Si/Al = 36 catalyst at any reaction temperatures tested. The higher Cu loading for the former catalyst is believed to be key for this difference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Catalysts Prepared from Atomically Dispersed Ce(III) on MgO Rival Bulk Ceria for CO Oxidation

Atomically dispersed cerium catalysts on an inert, crystalline MgO powder support were prepared by using both Ce(III) and Ce(IV) precursors. The materials were used as catalysts for CO oxidation in a once-through flow reactor and characterized by atomic-resolution scanning transmission electron microscopy, X-ray absorption near edge structure spectroscopy, X-ray photoelectron spectroscopy, and temperature-programmed reduction, among other techniques, before and after catalysis. The most active catalysts, formed from the precursor incorporating Ce(III), displayed a performance similar to that reported for bulk ceria under comparable conditions. The catalyst provided stable time-on-stream performance for as long as it was kept on stream, two days, increasing slightly in activity as the atomically dispersed cerium ions were transformed into ceria nanodomains represented as CeO x and having increased reducibility on the MgO support. Furthermore, the results suggest how highly dispersed supported ceria catalysts with low cerium loadings can be prepared and may pave the way to improved efficiencies of cerium utilization in oxidation catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Metal–Organic Framework Nodes as a Supporting Platform for Tailoring the Activity of Metal Catalysts

Catalysis is a ubiquitous element of the modern economy, representing a cornerstone of many sectors including energy, materials, and pharmaceuticals. Within this realm, 80% of reactions are carried out by heterogeneous catalysts due to their advantageous physical and chemical characteristics. In some heterogeneous systems, the reaction rate can be optimized through rational catalyst design, in which support materials can be tailored structurally and stereoelectronically for targeted purposes to better facilitate the catalytic reaction. To this end, metal-organic frameworks (MOFs) have garnered recent attention due to their high porosity, crystallinity, and chemical tunability, which can be used to derive structure-activity relationships in the design of catalysts. In this Perspective, we survey examples of catalytically active guest metals on the inorganic nodes of MOFs. This is done with the intention of providing design guidelines for tailoring chemical reactivity and insights into the opportunities for future growth in this field. Strategies for rational design in MOF catalysis include electronic tuning of the metal node in the MOF support, installing promoter ions onto the node to effect the reactivity of grafted metals, modulation of the spatial environment around the transition metal using the metal node structure, and achieving site uniformity in supported catalysts. By highlighting these efforts, we seek to underscore the role of MOF nodes as nonspectator supports for catalytic metal complexes and provide future directions for rational catalyst design by tuning reactivity on these anchoring platforms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Copper Single Atom-Triggered Niobia–Ceria Catalyst for Efficient Low-Temperature Reduction of Nitrogen Oxides

To reduce nitrogen oxide (NO x ) emission from diesel engines in the cold-start process benefitting the atmospheric environment, catalysts with superior low-temperature NO x removal efficiency are highly demanded. Herein, we report an efficient Nb 2 O 5 /CuO/CeO 2 (NbCuCe) oxide catalyst for the selective catalytic reduction (SCR) of NO x , showing much higher DeNO x activity below 200 °C, superior sulfur resistance, faster response, and much less NH 3 slip than the state-of-the-art Cu-CHA zeolite catalyst. Additionally, atomically dispersed Cu species facilitate the strong interaction between Cu and the Nb/Ce base catalyst, which significantly improves the low-temperature redox properties at Cu–O–Ce sites and NH 3 adsorption/activation at Nb–O–Cu sites, thus contributing to the superior SCR performance of NbCuCe at low temperatures. The developed NbCuCe catalyst is highly promising for efficient DeNO x from cold-start diesel engines and can be coupled with Cu-CHA to achieve a broad operation temperature window.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ceria Incorporation in Sinter-Resistant Platinum-Based Catalysts

Platinum group metals (PGM) are widely used for exhaust emission abatement. Sintering during the high-temperature emission control conditions decreases noble metal utilization efficiency. Efficient use of scarce noble metals requires sinter-resistant catalysts. Here we extend an approach to synthesize catalysts consisting of platinum nanoparticles encapsulated in a mixture of cerium and aluminum oxides (Pt@Al 2 O 3 -CeO 2 ). We tested the activity of this catalyst toward carbon monoxide, propene, and propane oxidation chosen as model oxidation reactions for emission control catalysts. Pt@Al 2 O 3 -CeO 2 catalysts demonstrated similar activity and stability upon aging as the comparison system without ceria, Pt@Al 2 O 3 , while maintaining small Pt nanoparticles and ceria crystallites. Additionally, we studied the influence of various thermal treatments on CO oxidation activity and determined that a steam treatment can activate low temperature CO oxidation activity of Pt@Al 2 O 3 -CeO 2 . STEM-EDS analysis revealed that thermal treatments led to the co-location of Pt and CeO 2 and temperature programmed-reduction analysis revealed that the steam treatment specifically enhanced CO oxidation activity through surface reduction of the CeO 2 . As a result, we demonstrate the versatility of this encapsulation approach to generate mixed metal-oxide supports with improved metal-support interactions without hindering nanoparticle stability.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Anion Exchange Membrane Water Electrolysis Using a Catalyst-Coated Membrane Cathode

A catalyst-coated membrane (CCM) approach to electrode fabrication for high pH water electrolysis offers enhanced interfacial contact between the catalyst layer and the membrane surface in comparison to the catalyst-coated substrate (CCS) electrode configuration. The CCM facilitates enhanced ionic and water transport between the cathode and the anion exchange membrane (AEM). This advantage is particularly significant with AEM water electrolysis (compared to proton exchange membrane water electrolysis) because the cathode typically operates under dry conditions and relies solely on diffusive water transport across the AEM from the liquid-fed anode. This study presents a direct performance comparison between CCS and CCM cathode configurations using identical hydrogen evolution reaction (HER) catalysts and other components. The use of a pseudo-reference electrode integrated into the membrane electrode assembly enabled detailed analysis of the CCM cathode polarization behavior. Surface characterization provided insight into the degradation mechanisms associated with the CCM configuration. Optimization of the cathode ionomer cross-link density improved both the cathode polarization performance and the electrolysis device durability. Further optimization of the HER catalyst loading in the CCM cathode resulted in additional gains in the electrolysis efficiency. Collectively, these findings offer valuable guidance for the design and fabrication of high-performance, durable AEM electrolysis CCMs.

Water electrolysis↗
DOE OSTI2022

Functional CeO x nanoglues for robust atomically dispersed catalysts

Single-atom catalysts make exceptionally efficient use of expensive noble metals and can bring out unique properties. However, applications are usually compromised by limited catalyst stability, which is due to sintering. Although sintering can be suppressed by anchoring the metal atoms to oxide supports, strong metal–oxygen interactions often leave too few metal sites available for reactant binding and catalysis, and when exposed to reducing conditions at sufficiently high temperatures, even oxide-anchored single-atom catalysts eventually sinter. Here we show that the beneficial effects of anchoring can be enhanced by confining the atomically dispersed metal atoms on oxide nanoclusters or ‘nanoglues’, which themselves are dispersed and immobilized on a robust, high-surface-area support. We demonstrate the strategy by grafting isolated and defective CeO x nanoglue islands onto high-surface-area SiO 2 ; the nanoglue islands then each host on average one Pt atom. Further, we find that the Pt atoms remain dispersed under both oxidizing and reducing environments at high temperatures, and that the activated catalyst exhibits markedly increased activity for CO oxidation. We attribute the improved stability under reducing conditions to the support structure and the much stronger affinity of Pt atoms for CeO x than for SiO 2 , which ensures the Pt atoms can move but remain confined to their respective nanoglue islands. The strategy of using functional nanoglues to confine atomically dispersed metals and simultaneously enhance their reactivity is general, and we anticipate that it will take single-atom catalysts a step closer to practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hydrogen generation via ammonia decomposition on highly efficient and stable Ru-free catalysts: approaching complete conversion at 450 °C

We report Hydrogen (H 2 ) is a prospective zero-carbon and high-energy-density fuel alternative to fossil fuels for generating power and clean energy. Ammonia (NH 3 ) is a promising H 2 (17.7%) carrier, which can easily overcome the challenges associated with H 2 storage and transportation. Thermocatalytic ammonia decomposition reaction (ADR) is an effective way to produce clean H 2 but it relies on the use of expensive and rare ruthenium (Ru)-based catalysts at elevated temperatures (>500 °C), hence is not sustainable and economically feasible. Herein, we report a synergistic strategy to design a heterostructured Ru-free catalyst, consisting of CoNi alloy nanoparticles well-dispersed on a MgO–CeO 2 –SrO mixed oxide support with potassium promotion. The resulting K–CoNi alloy –MgO–CeO 2 –SrO catalyst presents 97.7% and 87.5% NH 3 conversion efficiency at 450 °C at gas hourly space velocities (GHSVs) of 6000- and 12 000-mL h -1 g cat -1 , respectively. At 500 °C, the H 2 production rate (57.75 mmol g cat -1 min -1 ) becomes comparable to that of most of the reported Ru-based catalysts. The catalyst stability has been successfully demonstrated in both a fixed-bed reactor under high pressure (120 h at 5.0 bar) and a membrane reactor prototype (600 h at 1.5 bar) at 500 °C. High-temperature in situ XPS analysis, temperature-programmed desorption/reduction, and density functional theory calculations have been carried out to elucidate the possible active sites and performance enhancement mechanisms. This work highlights the importance of constructing optimal interfaces between active metal nanoparticles and oxide support for boosting the NH 3 to H 2 conversion efficiency and long-term stability.

25 ENERGY STORAGE↗
DOE OSTI2024

Reductive Depolymerization of Lignin to Aromatic Compounds over Promoted Nickel Catalysts in Sub– and Supercritical Methanol

The use of γ-Al 2 O 3 -supported Ni catalysts promoted with either Cu or Fe was investigated for the reductive catalytic fractionation (RCF) of hybrid poplar in methanol at 200 and 250 °C. The effectiveness of lignin depolymerization was quantified in terms of the lignin oil production, the quantity and distribution of identifiable monomers present in the lignin oil, and the yield of residual solids. All of the Ni-based catalysts tested provided improved yields of lignin oil and monomers, along with reduced char formation, relative to blank (sans catalyst) runs. The highest monomer yield of 51 % was obtained at 250 °C over a 20 wt.% Ni-5 wt.% Cu/Al 2 O 3 catalyst, the improved performance obtained through Cu promotion being attributed to the ability of Cu to facilitate NiO reduction, resulting in an increased amount of Ni 0 on the catalyst surface and, consequently, improved hydrogenation activity. Finally, the main monomers formed were propanol-, propyl- and propenyl-substituted guaiacol and syringol, the S/G ratio of the products corresponding closely to that in the native lignin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Correlating Catalyst Design and Discharged Product to Reduce Overpotential in Li-CO 2 Batteries

Li-CO 2 batteries with dual efficacy for greenhouse gas CO 2 sequestration and high energy output have been regarded as a promising electrochemical energy storage technology. However, battery feasibility has been hampered by inferior electrochemical performance due to large overpotentials and low cyclability primarily caused by the difficult decomposition of ultra-stable Li 2 CO 3 during charge. The use of cathode catalysts has been highlighted as a promising solution and catalyst properties, as well as the nature of discharge products, are closely correlated with electrochemical performance. Here, the catalyst design strategies that include active site enrichment, electrical transport enhancement, and mass transfer improvement are summarized. Catalyst effects on product decomposition are then subsequently introduced, while product geometry and chemical composition will be explored, with an emphasis on the formation/decomposition of Li 2 C 2 O 4 instead of Li 2 CO 3 . Building on previous research, future directions that facilitate improvements in catalyst design are put forward to reinforce the fundamental development of Li-CO 2 batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Redox oxide@molten salt as a generalized catalyst design strategy for oxidative dehydrogenation of ethane via selective hydrogen combustion

Here, the current study demonstrates a redox oxide @ molten salt core-shell architecture as a generalized redox catalyst design strategy for chemical looping – oxidative dehydrogenation of ethane. 17 combinations of redox active oxides and molten salts were prepared, evaluated, and characterized. X-ray diffraction indicates that the redox oxides and molten salts are fully compatible, forming separate and stable phases. X-ray photoelectron spectroscopy demonstrates that the molten salts aggregate at the redox oxide surface, forming a core-shell structure to block the non-selective sites responsible for CO x formation. Up to ~74% single-pass olefin yields were achieved using the proposed redox catalyst design strategy. Statistical analyses of the performance data indicate the potential to achieve up to 86.7% single-pass yield by simply optimizing the operating conditions using the redox catalysts reported in this study. Meanwhile, the generalizability of the catalyst design strategy offers exciting opportunities to further optimize the composition and performance of the redox catalysts for ethane ODH under a chemical looping scheme with significantly reduced energy consumption and CO 2 emissions.

03 NATURAL GAS↗
DOE OSTI2022

Crystallographic dependence of CO 2 hydrogenation pathways over HCP-Co and FCC-Co catalysts

We report efficient conversion of CO 2 is of great significance for sustainable supply of chemicals and fuels. While Co-based catalysts are known to be effective for CO hydrogenation in Fischer-Tropsch synthesis, they work very differently in CO 2 hydrogenation. This study reveals a crystallographic dependence of reaction pathways for CO 2 hydrogenation on Co catalyst showing a new type of structure sensitivity and structure-activity-selectivity relationship for CO 2 conversion to chemicals and fuels. The experimental work on CO 2 conversion including steady-state isotopic transient kinetic analysis (SSITKA) using 13 C-labeled CO 2 shows a preferential CH 4 formation over HCP-Co but dominant CO formation over FCC-Co. The density functional theory calculations indicate that CO 2 does dissociate directly into chemisorbed CO * and O * on both HCP-Co and FCC-Co, but the CO * intermediates on HCP-Co prefer to be hydrogenated to form CH 4 whereas the CO* on FCC-Co preferentially desorb to form CO. The significantly altered adsorption strength of CO * due to the presence of chemisorbed O * and CO 2 * species on the catalyst surface is responsible for the mechanistic disconnection in product selectivity between the CO 2 and CO hydrogenation over Co catalysts. This study also shows that the addition of K to Co diminishes the direct impact of Co crystal structure, but improves the selectivity to C 2 + hydrocarbons along with higher CO 2 conversion. This seems to result from another pathway originating from HCOO* intermediate from bonding interaction of surface Co atoms with carbon in CO 2 , leading to the formation of CH x * whose coupling subsequently give rises to C 2 + products. The present study sheds new light into the crystallographic structural sensitivity of CO 2 hydrogenation towards the rational design of more selective catalysts for CO 2 conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Multi-atom Pt and PtRu catalysts for high performance AEMFCs with ultra-low PGM content

To reduce the platinum group metal (PGM) loading in anion exchange membrane fuel cells (AEMFCs), it is important to transition to catalysts with very low PGM content, and eventually to catalysts that are completely PGM-free. Here, in this work, four supported low-PGM Pt and PtRu catalysts were prepared using a new, simple, scalable technique: Controlled Surface Tension (CST) method. CST allows for a high density of very small multi-atom clusters. Catalysts were physically characterized using a wide array of techniques and tested for their ORR and HOR activity both ex-situ and integrated into operating AEMFCs. The PGM loading was reduced by a factor of 14 while achieving comparable performance to commercial catalysts. AEMFCs were also assembled with ultralow PGM loading (0.05 mgPGM cm -2 ), where PtRu anodes were paired with Fe–N–C cathodes to achieve a specific power of 25 W/mg PGM (40 W/mg Pt ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗