Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Degradation of Congo Red dye by a Fe 2 O 3 @CeO 2 -ZrO 2 /Palygorskite composite catalyst: Synergetic effects of Fe 2 O 3

A newly designed Fe 2 O 3 @CeO 2 -ZrO 2 /Palygorskite heterogeneous Fenton catalyst with high degradation efficiency toward Congo Red (CR) is reported in this paper. The iron oxide (Fe 2 O 3 ) was used as the originator of hydroxyl radicals ( OH), CeO 2 -ZrO 2 was used as an efficient matrix of Fe 2 O 3 to enhance the oxidation performance, and the Palygorskite (Pal) played the role of substrate and adsorbent. A synergetic effect of the catalyst was realized by enhancing the adsorption capacity and dispersibility of CeO 2 -ZrO 2 and Fe 2 O 3 nanoparticles, and also due to charge transfer between these two species. The products were characterized by XRD, FTIR, SEM, TEM, XPS, VSM and nitrogen adsorption-desorption isotherms. The catalytic activities were evaluated in terms of many reaction parameters. The removal efficiency of CR was up to 95% on Fe 2 O 3 @CeO 2 -ZrO 2 /Pal under optimized conditions (Pal accounted for 30% of the catalyst mass fraction and Ce/Zr atoms molar ratio = 8:2, T = 30 °C, pH = 3.4, 4 g L -1 catalyst, 40 mM H 2 O 2 and 500 mg/L CR), the product also has shown good reusability. Both α-Fe 2 O 3 and CeO 2 -ZrO 2 played important roles in the generation of hydroxyl radicals, which determined the catalytic efficiency of the composite catalyst. Fe 2 O 3 @CeO 2 -ZrO 2 /Pal was proven to be a promising candidate in the field of heterogeneous Fenton catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of H 2 O in Catalytic Conversion of C 1 Molecules

Due to their role in controlling global climate change, the selective conversion of C 1 molecules such as CH 4 , CO, and CO 2 has attracted widespread attention. Typically, H 2 O competes with the reactant molecules to adsorb on the active sites and therefore inhibits the reaction or causes catalyst deactivation. However, H 2 O can also participate in the catalytic conversion of C 1 molecules as a reactant or a promoter. Herein, we provide a perspective on recent progress in the mechanistic studies of H 2 O-mediated conversion of C 1 molecules. We aim to provide an in-depth and systematic understanding of H 2 O as a promoter, a proton-transfer agent, an oxidant, a direct source of hydrogen or oxygen, and its influence on the catalytic activity, selectivity, and stability. We also summarize strategies for modifying catalysts or catalytic microenvironments by chemical or physical means to optimize the positive effects and minimize the negative effects of H 2 O on the reactions of C 1 molecules. Finally, we discuss challenges and opportunities in catalyst design, characterization techniques, and theoretical modeling of the H 2 O-mediated catalytic conversion of C 1 molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards computational design of zeolite catalysts for CO 2 reduction

Carbon dioxide, an energy waste by-product with significant environmental consequences can be utilized and converted into useful chemical products such as formic acid, formaldehyde, methanol or methane, but more energy and cost efficient catalytic processes are required. Here we develop the methodology for the intelligent selection of porous zeolites for dual-adsorption of hydrogen and carbon dioxide as templates for preparing the optimal catalytic environment for carbon dioxide reduction. Useful zeolite catalysts were computationally screened from over 300 thousand zeolite structures using a combination of molecular simulation and machine-learning techniques. Several of the top candidates were very promising energy-efficient templates for catalysis with the potential to perform at 50% above conventional reactors. As a result, it is also found that an optimal cavity size of around 6 Å is required to maximize the change in entropy–enthalpy upon adsorption with a maximum void space >30% to boost product formation per volume of material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cu deposited on CeOx-modified TiO 2 (110): Synergistic effects at the metal–oxide interface and the mechanism of the WGS reaction

Experimental techniques and DFT calculations have been combined to study and compare the effect of the metal–substrate interaction in Cu/TiO 2 (110) and Cu/CeO x /TiO 2 (110) catalysts for the water–gas shift (WGS) reaction. Experiments and theory show that CeOx nanoparticles affect the dispersion of copper on titania, and on the formed copper–ceria interface, there are synergistic effects which favor water dissociation and the WGS reaction. The minimum energy path for the WGS reaction on the new highly active catalytic system Cu/CeO x /TiO 2 (110) has been predicted by theoretical calculations. Main steps such as adsorption–dissociation of water and *OCOH carboxyl intermediate formation–deprotonation have been characterized. In this very particular system, water splitting is no longer the rate-limiting step because it can dissociate overcoming an energy barrier of only 0.92 kcal/mol. One important insight of the present work is to show that easy full hydration of the ceria particles strongly lowers the reaction barrier for the deprotonation of the *OCOH intermediate and facilitates the evolution of the WGS reaction. For the first time, a system has been found on which the WGS reaction is able to work with all the involved energy barriers below 12 kcal/mol. This remarkable behavior makes the metal/CeO x /TiO 2 family a potential candidate for industrial application as catalysts in the WGS reaction. In conclusion, the change in the metal–support interactions when going from Cu/TiO 2 to Cu/CeO x /TiO 2 illustrates the importance of optimizing the oxide phase when improving the performance of metal/oxide catalysts for the WGS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic enhancement in the performance of the microscopic two-stroke heat engine

Here we consider a model of heat engine operating in the microscopic regime: the two-stroke engine. It produces work and exchanges heat in two discrete strokes that are separated in time. The working body of the engine consists of two d-level systems initialized in thermal states at two distinct temperatures. Additionally, an auxiliary nonequilibrium system called catalyst may be incorporated with the working body of the engine, provided the state of the catalyst remains unchanged after the completion of a thermodynamic cycle. This ensures that the work produced by the engine arises solely from the temperature difference. Upon establishing the rigorous thermodynamic framework, we characterize twofold improvement stemming from the inclusion of a catalyst. Firstly, we prove that in the noncatalytic scenario, the optimal efficiency of the two-stroke heat engine with a working body composed of two-level systems is given by the Otto efficiency, which can be surpassed by incorporating a catalyst with the working body. Secondly, we show that incorporating a catalyst allows the engine to operate in frequency and temperature regimes that are not accessible for noncatalytic two-stroke engines. We conclude with a general conjecture about the advantage brought by a catalyst: including the catalyst with the working body always allows to improve efficiency over the noncatalytic scenario for any microscopic two-stroke heat engines. We prove this conjecture for two-stroke engines where the working body is composed of two d-level systems initialized in thermal states at two distinct temperatures, as long as the final joint state leading to optimal efficiency in the noncatalytic scenario is not a product state, or at least one of the d-level system is not thermal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Colloidal Platinum–Copper Nanocrystal Alloy Catalysts Surpass Platinum in Low-Temperature Propene Combustion

Low-temperature removal of noxious environmental emissions plays a critical role in minimizing the harmful effects of hydrocarbon fuels. Emission-control catalysts typically consist of large quantities of rare, noble metals (e.g., platinum and palladium), which are expensive and environmentally damaging metals to extract. Alloying with cheaper base metals offers the potential to boost catalytic activity while optimizing the use of noble metals. In this work, we show that Pt x Cu 100–x catalysts prepared from colloidal nanocrystals are more active than the corresponding Pt catalysts for complete propene oxidation. By carefully controlling their composition while maintaining nanocrystal size, alloys with dilute Cu concentrations (15–30% atomic fraction) demonstrate promoted activity compared to pure Pt. Complete propene oxidation was observed at temperatures as low as 150 °C in the presence of steam, and five to ten times higher turnover frequencies were found compared to monometallic Pt catalysts. Additionally, through DFT studies and structural and catalytic characterization, the remarkable activity of dilute Pt x Cu 100–x alloys was related to the tuning of the electronic structure of Pt to reach optimal binding energies of C* and O* intermediates. This work provides a general approach toward investigation of structure–property relationships of alloyed catalysts with efficient and optimized use of noble metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption-enhanced hydrolysis of glucan oligomers into glucose over sulfonated three-dimensionally ordered mesoporous carbon catalysts

The hydrolysis of cellulose and β(1 → 4) oligosaccharides on carbon catalysts is a promising approach for the selective production of glucose from cellulose and its derivatives. In this study, a structure–property relationship was developed for the hydrolysis of water soluble glucan oligomers over three dimensionally ordered mesoporous (3DOm) carbon with sulfonic acid groups. It was found that the number of sulfonic acid groups on 3DOm carbon catalysts and their adsorption properties need to be optimized to maximize the hydrolysis of water soluble glucan oligomers. The adsorption capacity of glucan oligomers on 3DOm carbon increases with their chain length, which can be attributed to two molecular behaviors: (a) long glucan oligomers adsorbed on the carbon surface exhibit a dense packing structure compared with relatively small glucan oligomers; and (b) a part of a glucan oligomer “dangles” off the carbon surface due to its branched structure. Furthermore, it was found that the adsorption enthalpy and entropy increased with increasing the chain length of the glucan oligomers, which favors the hydrolysis reaction to produce glucose over the carbon catalysts.

09 BIOMASS FUELS↗

Perspectives on Polyolefin Catalysis in Microfluidics for High-Throughput Screening: A Minireview

Polyolefins are the largest produced plastics in the world which traditionally employ continuous stirred tank reactors and fluidized bed reactors for commercial production. The operating condition, reaction kinetics, and molecular interactions inside the reactor strongly affect the polyolefin properties, which require stringent process control in conventional procedures. Understanding the catalytic pathway, behavior of polymer particles and effect of reactor conditions are essential for designing specific polymer properties, namely the molecular weight, chain length, polydispersity, etc. Microfluidics can play a significant role in designing polymers tailored to the user needs. Smaller channel dimensions help obtain uniform reaction conditions over the length of the microfluidic reactor in a controlled environment. With real-time monitoring techniques in microfluidics, even single particle growth of polymer can be studied to understand the parameters affecting the polymer properties. High throughput microfluidics can help catalyst screening in a short duration with less consumption of reagents generating less waste. When supplemented with efficient machine learning algorithms, automated high throughput microfluidics has the potential to rapidly optimize the process and develop new knowledge even with a limited data set. When trained on data sets generated using microfluidic experiments that are designed efficiently with working knowledge of the process, machine learning algorithms can provide the relationship between the multivariable parameters space and polymer properties, which is not possible with the traditional statistical methods and interpolation techniques. Here, the rise in the utilization of microfluidics, with the advancement of machine learning algorithms, for polyolefin catalysis, highlights the importance of microfluidics for catalyst discovery, parameter optimization, and understanding reaction pathway for producing polymers with specific properties for specialized applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-assisted pyrolysis of liquid hydrocarbons using iron-based alumina catalysts obtained by solution combustion synthesis: The effect of synthesis parameters

The microwave-absorbing and catalytic properties of iron-based alumina (FeAl x O y ) materials have enabled their use as catalysts for the microwave-assisted generation of hydrogen and carbon via pyrolysis of hydrocarbons. Solution combustion synthesis (SCS) is a promising method to fabricate these materials, but the pyrolysis performance still needs to be improved. The present work investigated how altering the SCS parameters affects the pyrolysis of diesel fuel, gasoline, and crude oil. Two fuels (citric acid and glycine), four Fe:Al molar ratios, and two heating modes (hotplate and furnace) were tested. Fe/γ-Al 2 O 3 and Fe/β-SiC catalysts were prepared via incipient wetness impregnation for comparison. Among the three fossil fuels tested, diesel fuel yielded the highest amounts of H 2 and least amounts of CO x . The choice of fuel for the SCS process and the Fe/Al ratio strongly affected pyrolysis performance as they influence properties important for both catalysis and microwave absorption. The use of glycine resulted in catalysts that exhibited high H 2 yield and low CO 2 generation, which is explained by the revealed structural differences. The increase in the Fe:Al molar ratio accelerated microwave heating by adding more magnetic loss but also increased the amount of CO x . When the optimal SCS parameters were used, FeAl x O y catalysts outperformed Fe/γ-Al 2 O 3 and Fe/β-SiC. The high H 2 generation efficiency of the SCS catalysts is explained by their enhanced microwave-absorption properties. Scanning electron microscopy and energy dispersive X-ray spectroscopy revealed the formation of large-diameter CNTs via the tip-growth mechanism. The regeneration of SCS catalysts was demonstrated via the Boudouard reaction.

Carbon nanotubes↗

Impacts of ruthenium valence state on the electrocatalytic activity of ruthenium ion-complexed graphitic carbon nitride/reduced graphene oxide nanosheets towards hydrogen evolution reaction

Design and engineering of effective electrode catalysts represents a critical first step for hydrogen production by electrochemical water splitting. Nanocomposites based on ruthenium atomically dispersed within a carbon scaffold have emerged as viable candidates. In the present study, ruthenium metal centers are atomically embedded within graphitic carbon nitride/reduced graphene oxide nanosheets by thermal refluxing. Subsequent chemical reduction/oxidation leads to ready manipulation of the ruthenium valence state, as evidenced in microscopic and spectroscopic measurements, and hence enhancement/diminishment of the electrocatalytic activity towards hydrogen evolution reaction in both acidic and alkaline media. Further, this is largely ascribed to the increased/reduced contribution of the Ru valence electrons to the density of state near the Fermi level which dictates the binding and reduction of hydrogen. Results from this study highlight the significance of the valence state of metal centers in the manipulation and optimization of the catalytic performance of single atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Catalyst Durability for the Oxidative Production of Biobased Chemicals (Cooperative Research and Development Final Report)

This CRADA will facilitate technology maturation for NREL-developed atomic layer deposition (ALD) coated catalyst materials that are tailored for durability during the oxidative production of biobased chemicals. This project will address optimizing process parameters for scaling aluminum oxide (Al 2 O 3 ) ALD coated catalysts, demonstrating ALD coated catalyst performance for biomass oxidation, and validating economic models that project significant cost benefits for ALD-enhanced catalytic processes. This work will strengthen private-public partnerships in the area of advanced catalyst manufacturing for energy-related technology. Critical information will be collected to elevate the Technology Readiness Level and increase our competitiveness for cooperative R&D agreements and licensing. Success of this work will be crosscutting as it can facilitate advanced catalyst development for both renewable and conventional processes.

09 BIOMASS FUELS↗

From thermal catalysis to plasma catalysis: a review of surface processes and their characterizations

The use of atmospheric pressure plasma to enhance catalytic chemical reactions involves complex surface processes induced by the interactions of plasma-generated fluxes with catalyst surfaces. Industrial implementation of plasma catalysis necessitates optimizing the design and realization of plasma catalytic reactors that enable chemical reactions that are superior to conventional thermal catalysis approaches. This requires the fundamental understanding of essential plasma-surface interaction mechanisms of plasma catalysis from the aspect of experimental investigation and theoretical analysis or computational modeling. In addition, experimental results are essential to validate the relative theoretical models and hypotheses of plasma catalysis that was rarely understood so far, compared to conventional thermal catalysis. This overview focuses on two important application areas, nitrogen fixation and methane reforming, and presents a comparison of important aspects of the state of knowledge of these applications when performed using either plasma-catalysis or conventional thermal catalysis. We discuss the potential advantage of plasma catalysis over thermal catalysis from the aspects of plasma induced synergistic effect and in situ catalyst regeneration. In-situ/operando surface characterization of catalysts in plasma catalytic reactors is a significant challenge since the high pressure of realistic plasma catalysis systems preclude the application of many standard surface characterization techniques that operate in a low-pressure environment. Here, we present a review of the status of experimental approaches to probe gas-surface interaction mechanisms of plasma catalysis, including an appraisal of demonstrated approaches for integrating surface diagnostic tools into plasma catalytic reactors.

54 ENVIRONMENTAL SCIENCES↗

Reactive Capture and Conversion of Carbon Dioxide to Methanol with ZnZrO 2 and Alkali-Promoted Mg 3 AlO x Mixed Oxide Catalytic Sorbents

Reactive capture and conversion (RCC) explores the use of a single-unit process to capture CO 2 and produce a product, in this case, methanol (MeOH). In this study, different configurations of a catalytic sorbent (CS) composed of ZnZrO 2 catalyst and Mg 3 AlO x sorbent with and without alkali modification are evaluated for CO 2 adsorption, steady-state catalysis with cofed CO 2 and H 2 , and transient RCC performance. A catalyst composed of a physical mixture of Mg 3 AlO x with ZnZrO 2 resulted in a slight increase in CO 2 uptake, with a low impact on the catalytic activity and RCC of the materials compared to ZnZrO 2 alone. In contrast, Na impregnation significantly increased the level of CO 2 uptake from 0.28 mmol/g (ZnZrO 2 alone) to 0.6 and 1.1 mmol/g for the CS with Na on the catalyst or Mg 3 AlO x , respectively. However, Na impregnation reduced the CO 2 conversion rate and MeOH selectivity during steady-state cofeed experiments at 300 °C and 6 bar. In contrast to steady-state catalysis conditions, RCC, which is a cyclic capture and conversion process, creates dynamic CO 2 and H 2 surface coverages, favoring CH 4 in the early stages of the conversion step and then CO and MeOH as the catalyst CO 2 coverage reduces. The highest MeOH productivity during RCC was achieved with CS that balanced the CO 2 uptake with only moderate catalyst rate reductions caused by Na addition. The optimal material, ZnZrO 2 +10%Na/Mg 3 AlO x , achieved a CO 2 uptake of 0.8 mmol/g and a MeOH productivity of 0.5 mmol/g with 100% selectivity at 260 °C and 6 bar during RCC. This marks the highest RCC MeOH productivity reported to date, although the process needs further optimization and even with optimization, may remain impractical. The results further demonstrate that optimization of catalytic sorbents under steady-state flow conditions does not easily correlate to transient capture and conversion cycles for methanol synthesis from CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced NO, CO and C 3 H 6 conversion on Pt/Pd catalysts: Impact of oxygen storage material and catalyst architecture

Simultaneous conversion of NO, CO and C 3 H 6 under stoichiometric conditions was carried out on washcoated monoliths containing oxygen storage material (OSM)-promoted mixed Platinum group metals (PGM: Pt(95 %)/Pd(5 %)), to evaluate OSM promotion and to identify the best architecture. The studied OSMs include ceria-zirconia (Ce 0.3 Zr 0.7 O 2 ; CZO) and mixed metal oxide spinel (Mn 0.5 Fe 2.5 O 4 ; MFO). PGM supported directly on the OSM was found to be the best design for CZO, leading to a ~70 °C simultaneous decrease in the light-off temperature (T 80 ; feed temperature giving 80 % conversion) for NO, CO and C 3 H 6 conversion compared to the alumina-supported PGM. Close coupling between the PGM and CZO is responsible for the activity promotion. In contrast, a dual-layer architecture (top PGM layer, bottom MFO layer) outperformed the MFO-supported PGM catalyst. The dual-layer PGM-MFO catalyst decreased the T 80 by ~50 °C for NO, CO and C 3 H 6 conversion compared to the PGM-only catalyst. Enhancement obtained with the dual-layer PGM-MFO architecture relies on a direct catalytic contribution from the spinel. During lean/rich modulation the addition of CZO or spinel helps to mitigate the detrimental impact of modulation on NO, CO and C 3 H 6 conversion above 400 °C. The data suggest that both CZO and MFO can buffer lean/rich modulation but exhibit preference to different reductants; CZO-supported PGM and dual-layer PGM-MFO show no conversion decrease during modulation for CO or C 3 H 6 modulation, respectively. Dynamic oxygen storage capacity (DOSC) measurements show that the spinel exhibits ~10 times higher DOSC than CZO for both CO and C 3 H 6 reductants. Both CO and C 3 H 6 are equally effective reductants for the MFO but CO is better for CZO and PGM-deposited CZO. The study provides useful insight into benefits of OSM and provides guidance for optimization of the multi-component PGM + OSM catalyst composition and architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pt/Ferric Hydroxyphosphate: An Effective Catalyst for the Selective Hydrogenation of α,β-Unsaturated Aldehydes (Ketones) into α,β-Unsaturated Alcohols

Four micro (nano)-sized mesoporous ferric hydroxyphosphates (FHP) are synthesized by a reverse microemulsion-solvothermal method, and then are used as supports to prepare supported Pt catalysts. The mean particle diameter of Pt nanoparticles (NPs) was 4.5–4.6 nm. When the four different Pt/FHP catalysts were used into the hydrogenation of α,β-unsaturated aldehydes (ketones) to their corresponding unsaturated alcohols, Pt/FHP (c) catalyst showed better catalytic performance than the other three partners. Under the optimal experimental conditions, several tested α,β-unsaturated aldehydes could be effectively transformed into corresponding unsaturated alcohols over Pt/FHP (c) catalyst. The catalyst could be recycled and reused several times without activity loss. We propose the stronger interaction between the Pt NPs and ferric ions of the FHP (c) are responsible for its good catalytic performance, and this stronger interaction should be rooted in its enhanced Lewis acid strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transport–Friendly Microstructure in SSC–MEA: Unveiling the SSC Ionomer–Based Membrane Electrode Assemblies for Enhanced Fuel Cell Performance

The significant role of the cathodic binder in modulating mass transport within the catalyst layer (CL) of fuel cells is essential for optimizing cell performance. This investigation focuses on enhancing the membrane electrode assembly (MEA) through the utilization of a short-side-chain perfluoro-sulfonic acid (SSC-PFSA) ionomer as the cathode binder, referred to as SSC-MEA. This study meticulously visualizes the distinctive interpenetrating networks of ionomers and catalysts, and explicitly clarifies the triple-phase interface, unveiling the transport-friendly microstructure and transport mechanisms inherent in SSC-MEA. The SSC-MEA exhibits advantageous microstructural features, including a better-connected ionomer network and well-organized hierarchical porous structure, culminating in superior mass transfer properties. Relative to the MEA bonded by long-side-chain perfluoro-sulfonic acid (LSC-PFSA) ionomer, noted as LSC-MEA, SSC-MEA exhibits a notable peak power density (1.23 W cm –2 ), efficient O 2 transport, and remarkable proton conductivity (65% improvement) at 65 °C and 70% relativity humidity (RH). These findings establish crucial insights into the intricate morphology-transport-performance relationship in the CL, thereby providing strategic guidance for developing highly efficient MEA.

25 ENERGY STORAGE↗

Multimetallic nanoparticle catalysts with enhanced electrooxidation

A new structure-control strategy to optimize nanoparticle catalysis is provided. The presence of Au in FePtAu facilitates FePt structure transformation from chemically disordered face centered cubic (fcc) structure to chemically ordered face centered tetragonal (fct) structure, and further promotes formic acid oxidation reaction (FAOR). The fct-FePtAu nanoparticles show high CO poisoning resistance, achieve mass activity as high as about 2810 mA/mg Pt, and retain greater than 90% activity after a 13 hour stability test.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗