Search NASA⌕ Search

SEARCH · Search NASA

Results for “data dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Simulation and Development of the Radial Time Projection Chamber For the Bonus12 Experiment in CLAS12

Knowledge of the structure of nucleons (i.e. protons and neutrons) is a central topic of interest to nuclear/particle physicists. Much more is known about the structure of the proton than the neutron due to the lack of high-density free neutron targets. The Barely Off-shell Nucleon Structure experiment (BONuS12) at Jefferson Lab (JLab) is a second generation experiment upgraded/optimized to advance our knowledge of the neutron's structure using the deep-inelastic scattering of electrons off deuterium. Typically, since deuterium is a nuclear target, corrections for off-shell and nuclear binding effects must be taken into account in order to extract results on the neutron. These corrections are model-dependent and therefore have limited our success in extracting neutron information using deuterium targets. In the BONuS12 experiment, 10.6 GeV electrons are scattered off of a deuterium target. By detecting the low momentum spectator proton at backward angles, the uncertainty due to final state interactions is minimized. The goal of the experiment is to measure the ratio of the neutron to proton structure functions ($F^n_2/F^p_2$) as the Bjroken scaling variable x approaches 1. The newly designed Radial Time Projection Chamber (RTPC) for BONuS12 detects the spectator proton in coincidence with the scattered electron, which is detected in the CEBAF Large Acceptance Spectrometer (CLAS12). This work presents the simulation and development of the new BONuS12 RTPC. The design, construction, and testing of the Drift-gas Monitoring Sysytem (DMS) for the BONuS12 experiment is also described. The results of the DMS operation as well as the first preliminary data from the BONuS12 experimental run are given. Because the BONuS12 data analysis depends on CLAS12 working effectively, an effort to verify the CLAS12 operation with the extraction of the inclusive deep inelastic cross section from the first experiment in CLAS12 (Run Group A) will be presented.

Dzbenski, Nathan↗

Identifiability and predictability of integer- and fractional-order epidemiological models using physics-informed neural networks

Here we analyze a plurality of epidemiological models through the lens of physics-informed neural networks (PINNs) that enable us to identify time-dependent parameters and data-driven fractional differential operators. In particular, we consider several variations of the classical susceptible-infectious-removed (SIR) model by introducing more compartments and fractional-order and time-delay models. We report the results for the spread of COVID-19 in New York City, Rhode Island and Michigan states and Italy, by simultaneously inferring the unknown parameters and the unobserved dynamics. For integer-order and time-delay models, we fit the available data by identifying time-dependent parameters, which are represented by neural networks. In contrast, for fractional differential models, we fit the data by determining different time-dependent derivative orders for each compartment, which we represent by neural networks. We investigate the structural and practical identifiability of these unknown functions for different datasets, and quantify the uncertainty associated with neural networks and with control measures in forecasting the pandemic.

60 APPLIED LIFE SCIENCES↗

The Problem of Perception

There is a common perception among young students that the surest path to resolving scientific controversies is to design a clever experiment, one that will definitively resolve conflicting hypotheses. However, I have found that most scientific controversies do not revolve around specific experimental data, but instead are disputes over data interpretation. Data interpretations depend on a scientist’s underlying assumptions and worldview. For example, a molecular biologist might think of protein expression as an outcome of mRNA levels, whereas a biochemist might think in terms of synthetic and degradation rates. Both are right, of course, but each might expect different reasons for a change in the amount of a protein. Our perspective and assumptions regarding how living systems work defines us as biologists, which is why arguments over interpretations can get so nasty. If another scientist disputes the validity of your viewpoint, it can impact your reputation as well as your ego.

99 GENERAL AND MISCELLANEOUS↗

RNi{sub 8}Si{sub 3} (R=Gd,Tb): Novel ternary ordered derivatives of the BaCd{sub 11} type

The title compounds have been synthesized and characterized both from the structural and magnetic point of view. Both crystallize in a new monoclinic structure strictly related to the tetragonal BaCd{sub 11} type. The structure was solved by means of X-ray single-crystal techniques for GdNi{sub 8}Si{sub 3} and confirmed for TbNi{sub 8}Si{sub 3} on powder data; the corresponding lattice parameters (obtained from Guinier powder patterns) are a=6.3259(2), b=13.7245(5), c=7.4949(3) Å, β=113.522(3)°, V{sub cell}=596.64(3) Å{sup 3} and a=6.3200(2), b=13.6987(4), c=7.4923(2) Å, β=113.494(2)°, V{sub cell}=594.88(2) Å{sup 3}. The symmetry relationship between the tI48-I4{sub 1}/amd BaCd{sub 11} aristotype and the new ordered mS48-C2/c GdNi{sub 8}Si{sub 3} derivative is described via the Bärnighausen formalism within the group theory. The large Gd–Gd (Tb–Tb) distances, mediated via Ni–Si network, likely lead to weak magnetic interactions. Low-field magnetization vs temperature measurements indicate weak and field-sensitive antiferromagnetic ground state, with ordering temperatures of 3 K in GdNi{sub 8}Si{sub 3} and about 2–3 K in TbNi{sub 8}Si{sub 3}. On the other hand, the isothermal field-dependent magnetization data show the presence of competing interactions in both compounds, with a field-induced ferromagnetic behavior for GdNi{sub 8}Si{sub 3} and a ferrimagnetic-like behavior in TbNi{sub 8}Si{sub 3} at the ordering temperature T{sub C/N} of about (or slightly higher than) 3K. The magnetocaloric effect, quantified in terms of isothermal magnetic entropy change ΔS{sub m}, has the maximum values of –19.8 J(kg K){sup −1} (at 4 K for 140 kOe field change) and −12.1 J(kg K){sup −1} (at 12 K for 140 kOe field change) in GdNi{sub 8}Si{sub 3} and TbNi{sub 8}Si{sub 3}, respectively. - Graphical abstract: GdNi{sub 8}Si{sub 3} and TbNi{sub 8}Si{sub 3} compounds are isostructural, and crystallize in a new monoclinic type strictly related to the tetragonal BaCd{sub 11} structure. The large R–R interatomic distances mediated via Ni–Si network lead to a weak magnetism in both compounds. - Highlights: • Novel RNi{sub 8}Si{sub 3} (R=Gd, Tb) compounds have been synthesized and characterized. • GdNi{sub 8}Si{sub 3} and TbNi{sub 8}Si{sub 3} are isostructural compounds, belonging to a new monoclinic structure type. • The monoclinic GdNi{sub 8}Si{sub 3} type is an ordered derivative of the tetragonal BaCd{sub 11} type. • The large R–R interatomic distances mediated via Ni–Si network lead to a weak magnetism. • Both compounds GdNi{sub 8}Si{sub 3} and TbNi{sub 8}Si{sub 3} show antiferromagnetic-like order around 3 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improving Grid Awareness by Empowering Utilities with Machine Learning and Artificial Intelligence

Gap filling time series data typically depends on linear interpolation. More recently gap filling advancements include machine learning techniques. However, none leverage advanced learning approach that uses cohort training or a neighborhood informed approach, which is described in this report. The report also describes a physics informed approach using Reduced Order Models (ROM). There are several methods to capture the nature of the detailed system in aggregated models, however there is a trade-off for these methods developed for multiple applications. These methods have specific requirements and applications that includes consideration of dynamics or covering a larger range of operating conditions, etc. The various methods of aggregation are: 1) Thevenin equivalents for downstream networks 2) Equivalent feeder representation to capture downstream network losses accurately 3) Structured reduced order models for dynamics 4) System identification-based ROM (abstract dynamical model) Methods described in items 1 and 2 above are ideal for steady-state models and useful for this application. Of these two methods, based on the data availability, the targeted application, the reduced order model that is proposed to be developed is the equivalent feeder model representation. This includes a structure of the reduced order model whose parameters can be determined by the system load and losses with the meter measurements.

14 SOLAR ENERGY↗

An adaptive alpha for the implicit Monte Carlo equations

During the derivation of Fleck and Cumming's Implicit Monte Carlo (IMC) equations, a global user parameter {alpha} is introduced that may be adjusted in the range 0.5 {<=} {alpha} {<=} 1.0 in order to control the degree of 'implicitness' of the IMC approximation of the thermal radiative transfer equations. For linear (and certain nonlinear) problems, it can be shown that the IMC equations are second-order accurate in the time step size {Delta}{sub t} if {alpha} = 0.5, and they are first-order accurate otherwise. However, users almost universally choose {alpha} = 1 in an attempt to avoid unphysical temperature oscillations that can occur for problem regions in which the optical time step is large. In this paper, we provide a mathematically motivated, adaptive value of {alpha} that dynamically changes according to the space- and time-dependent problem data. We show that our {alpha} {yields} 0.5 in the limit of small {Delta}{sub t}, which automatically produces second-order accuracy. In the limit of large time steps, {alpha} > 1; this retains the 'fully implicit' time behavior that is usually employed throughout the entire problem. An adaptive {alpha} also has the advantages of being trivial to implement in current IMC implementations and allowing the elimination of a user input parameter that is a potential source of confusion. Test problems are presented to demonstrate the accuracy of the new approach.

97 MATHEMATICS AND COMPUTING↗

Scientific Process Automation and Workflow Management

We introduce and describe scientific workflows, i.e., executable descriptions of automatable scientific processes such as computational science simulations and data analyses. Scientific workflows are often expressed in terms of tasks and their (data ow) dependencies. This chapter first provides an overview of the characteristic features of scientific workflows and outlines their life cycle. A detailed case study highlights workflow challenges and solutions in simulation management. We then provide a brief overview of how some concrete systems support the various phases of the workflow life cycle, i.e., design, resource management, execution, and provenance management. We conclude with a discussion on community-based workflow sharing.

97 MATHEMATICS AND COMPUTING↗

THE PAN-STARRS 1 PHOTOMETRIC REFERENCE LADDER, RELEASE 12.01

As of 2012 January 21, the Pan-STARRS 1 3{pi} Survey has observed the 3/4 of the sky visible from Hawaii with a minimum of 2 and mean of 7.6 observations in five filters, g {sub P1}, r {sub P1}, i {sub P1}, z {sub P1}, y {sub P1}. Now at the end of the second year of the mission, we are in a position to make an initial public release of a portion of this unprecedented data set. This article describes the PS1 Photometric Ladder, Release 12.01. This is the first of a series of data releases to be generated as the survey coverage increases and the data analysis improves. The Photometric Ladder has rungs every hour in right ascension and at four intervals in declination. We will release updates with increased area coverage (more rungs) from the latest data set until the PS1 survey and the final re-reduction are completed. The currently released catalog presents photometry of {approx}1000 objects per square degree in the rungs of the ladder. Saturation occurs at g {sub P1}, r {sub P1}, i {sub P1} {approx} 13.5; z {sub P1} {approx} 13.0; and y {sub P1} {approx} 12.0. Photometry is provided for stars down to g {sub P1}, r {sub P1}, i {sub P1} {approx} 19.1 in the AB system. This data release depends on the rigid 'Ubercal' photometric calibration using only the photometric nights, with systematic uncertainties of (8.0, 7.0, 9.0, 10.7, 12.4) mmag in (g {sub P1}, r {sub P1}, i {sub P1}, z {sub P1}, y {sub P1}). Areas covered only with lower quality nights are also included, and have been tied to the Ubercal solution via relative photometry; photometric accuracy of the non-photometric regions is lower and should be used with caution.

79 ASTRONOMY AND ASTROPHYSICS↗

Remote Sensing of Tropical Ecosystems: Atmospheric Correction and Cloud Masking Matter

Tropical rainforests are significant contributors to the global cycles of energy, water and carbon. As a result, monitoring of the vegetation status over regions such as Amazonia has been a long standing interest of Earth scientists trying to determine the effect of climate change and anthropogenic disturbance on the tropical ecosystems and its feedback on the Earth's climate. Satellite-based remote sensing is the only practical approach for observing the vegetation dynamics of regions like the Amazon over useful spatial and temporal scales, but recent years have seen much controversy over satellite-derived vegetation states in Amazônia, with studies predicting opposite feedbacks depending on data processing technique and interpretation. Recent results suggest that some of this uncertainty could stem from a lack of quality in atmospheric correction and cloud screening. In this paper, we assess these uncertainties by comparing the current standard surface reflectance products (MYD09, MYD09GA) and derived composites (MYD09A1, MCD43A4 and MYD13A2 - Vegetation Index) from the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard the Aqua satellite to results obtained from the Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm. MAIAC uses a new cloud screening technique, and novel aerosol retrieval and atmospheric correction procedures which are based on time-series and spatial analyses. Our results show considerable improvements of MAIAC processed surface reflectance compared to MYD09/MYD13 with noise levels reduced by a factor of up to 10. Uncertainties in the current MODIS surface reflectance product were mainly due to residual cloud and aerosol contamination which affected the Normalized Difference Vegetation Index (NDVI): During the wet season, with cloud cover ranging between 90 percent and 99 percent, conventionally processed NDVI was significantly depressed due to undetected clouds. A smaller reduction in NDVI due to increased aerosol levels was observed during the dry season, with an inverse dependence of NDVI on aerosol optical thickness (AOT). NDVI observations processed with MAIAC showed highly reproducible and stable inter-annual patterns with little or no dependence on cloud cover, and no significant dependence on AOT (p less than 0.05). In addition to a better detection of cloudy pixels, MAIAC obtained about 20-80 percent more cloud free pixels, depending on season, a considerable amount for land analysis given the very high cloud cover (75-99 percent) observed at any given time in the area. We conclude that a new generation of atmospheric correction algorithms, such as MAIAC, can help to dramatically improve vegetation estimates over tropical rain forest, ultimately leading to reduced uncertainties in satellite-derived vegetation products globally.

tropical ecosystems↗

Electrical and optical properties of Ta-Si-N thin films deposited by reactive magnetron sputtering

The electrical and optical properties of Ta{sub x}Si{sub y}N{sub z} thin films deposited by reactive magnetron sputtering from individual Ta and Si targets were studied in order to investigate the effects of nitrogen and silicon contents on both properties and their correlation to the film microstructure. Three sets of fcc-Ta{sub x}Si{sub y}N{sub z} thin films were prepared: sub-stoichiometric Ta{sub x}Si{sub y}N{sub 0.44}, nearly stoichiometric Ta{sub x}Si{sub y}N{sub 0.5}, and over-stoichiometric Ta{sub x}Si{sub y}N{sub 0.56}. The optical properties were investigated by near-normal-incidence reflectivity and ellipsometric measurements in the optical energy range from 0.375 eV to 6.8 eV, while the d.c. electrical resistivity was measured in the van der Pauw configuration from 20 K to 300 K. The optical and electrical measurements were interpreted using the standard Drude-Lorentz model and the so-called grain boundary scattering model, respectively. The electronic properties were closely correlated with the compositional and structural modifications of the Ta{sub x}Si{sub y}N{sub z} films due to variations in the stoichiometry of the fcc-TaN{sub z} system and the addition of Si atoms. According to the nitrogen and silicon contents, fcc-Ta{sub x}Si{sub y}N{sub z} films can exhibit room temperature resistivity values ranging from 10{sup 2} {mu}{Omega} cm to about 6 Multiplication-Sign 10{sup 4} {mu}{Omega} cm. The interpretation of the experimental temperature-dependent resistivity data within the Grain Boundary Scattering model, combined with the results from optical investigations, showed that the mean electron transmission probability G and the free carriers concentration, N, are the main parameters that control the transport properties of these films. The results indicated that the correlation between electrical and optical measurements with the chemical composition and the nanostructure of the Ta{sub x}Si{sub y}N{sub z} thin films provides a pertinent and consistent description of the evolution of the Ta-Si-N system from a solid solution to a nanocomposite material due to the addition of Si atoms.

36 MATERIALS SCIENCE↗

Magnetocaloric Effect in La{sub 0.67}Ba{sub 0.33}Mn{sub 0.95}Ni{sub 0.05}O{sub 3} Manganite Near Room Temperature

We report the structural, magnetic, and magnetocaloric properties of La{sub 0.67}Ba{sub 0.33}Mn{sub 0.95}Ni{sub 0.05}O{sub 3} (LBMNO) manganite, synthesized by sol-gel method. X-ray diffraction (XRD) analysis using Rietveld refinement showed that this sample crystallizes in the rhombohedral structure with R 3-bar c space group. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) analysis were used to confirm the structure formation of the LBMNO material. The temperature dependent magnetization data revealed a transition from ferromagnetic (FM) to paramagnetic (PM) phase at T{sub C}= 308 K. Using Arrott plots, it was found that the transition is of a second order. From the measured magnetization data as a function of magnetic applied field, the magnetic entropy change (−ΔS{sub M}) and the relative cooling power RCP have been determined. In the vicinity of T{sub C} (−ΔS{sub M}) reached a maximum value of 2.15 J kg{sup − 1} K{sup − 1} and a large RCP value of about 299 J kg{sup − 1} under 5 T{sup − 1}. This magnetocaloric effect has been analyzed by considering the Landau theory of magnetic phase transition. Consequently, our sample can be considered a promising material in room-temperature magnetic refrigeration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Leakage current phenomena in Mn-doped Bi(Na,K)TiO{sub 3}-based ferroelectric thin films

Mn-doped 80(Bi{sub 0.5}Na{sub 0.5})TiO{sub 3}-20(Bi{sub 0.5}K{sub 0.5})TiO{sub 3} thin films were fabricated by chemical solution deposition on Pt/TiO{sub 2}/SiO{sub 2}/Si substrates. Steady state and time-dependent leakage current were investigated from room temperature to 180 °C. Undoped and low-doped films showed space-charge-limited current (SCLC) at high temperatures. The electric field marking the transition from Ohmic to trap-filling-limited current increased monotonically with Mn-doping. With 2 mol. % Mn, the current was Ohmic up to 430 kV/cm, even at 180 °C. Modeling of the SCLC showed that all films exhibited shallow trap levels and high trap concentrations. In the regime of steady state leakage, there were also observations of negative differential resistivity and positive temperature coefficient of resistivity near room temperature. Both of these phenomena were confined to relatively low temperatures (below ∼60 °C). Transient currents were observed in the time-dependent leakage data, which was measured out to several hundred seconds. In the undoped films, these were found to be a consequence of oxygen vacancy migration modulating the electronic conductivity. The mobility and thermal activation energy for oxygen vacancies was extracted as μ{sub ion} ≈ 1.7 × 10{sup −12} cm{sup 2} V{sup −1} s{sup −1} and E{sub A,ion} ≈ 0.92 eV, respectively. The transient current displayed different characteristics in the 1 mol. % Mn-doped films which were not readily explained by oxygen vacancy migration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-electron-mobility GaN grown on free-standing GaN templates by ammonia-based molecular beam epitaxy

The dependence of electron mobility on growth conditions and threading dislocation density (TDD) was studied for n{sup −}-GaN layers grown by ammonia-based molecular beam epitaxy. Electron mobility was found to strongly depend on TDD, growth temperature, and Si-doping concentration. Temperature-dependent Hall data were fit to established transport and charge-balance equations. Dislocation scattering was analyzed over a wide range of TDDs (∼2 × 10{sup 6} cm{sup −2} to ∼2 × 10{sup 10} cm{sup −2}) on GaN films grown under similar conditions. A correlation between TDD and fitted acceptor states was observed, corresponding to an acceptor state for almost every c lattice translation along each threading dislocation. Optimized GaN growth on free-standing GaN templates with a low TDD (∼2 × 10{sup 6} cm{sup −2}) resulted in electron mobilities of 1265 cm{sup 2}/Vs at 296 K and 3327 cm{sup 2}/Vs at 113 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlating electroluminescence characterization and physics-based models of InGaN/GaN LEDs: Pitfalls and open issues

Electroluminescence (EL) characterization of InGaN/GaN light-emitting diodes (LEDs), coupled with numerical device models of different sophistication, is routinely adopted not only to establish correlations between device efficiency and structural features, but also to make inferences about the loss mechanisms responsible for LED efficiency droop at high driving currents. The limits of this investigative approach are discussed here in a case study based on a comprehensive set of current- and temperature-dependent EL data from blue LEDs with low and high densities of threading dislocations (TDs). First, the effects limiting the applicability of simpler (closed-form and/or one-dimensional) classes of models are addressed, like lateral current crowding, vertical carrier distribution nonuniformity, and interband transition broadening. Then, the major sources of uncertainty affecting state-of-the-art numerical device simulation are reviewed and discussed, including (i) the approximations in the transport description through the multi-quantum-well active region, (ii) the alternative valence band parametrizations proposed to calculate the spontaneous emission rate, (iii) the difficulties in defining the Auger coefficients due to inadequacies in the microscopic quantum well description and the possible presence of extra, non-Auger high-current-density recombination mechanisms and/or Auger-induced leakage. In the case of the present LED structures, the application of three-dimensional numerical-simulation-based analysis to the EL data leads to an explanation of efficiency droop in terms of TD-related and Auger-like nonradiative losses, with a C coefficient in the 10{sup −30} cm{sup 6}/s range at room temperature, close to the larger theoretical calculations reported so far. However, a study of the combined effects of structural and model uncertainties suggests that the C values thus determined could be overestimated by about an order of magnitude. This preliminary attempt at uncertainty quantification confirms, beyond the present case, the need for an improved description of carrier transport and microscopic radiative and nonradiative recombination mechanisms in device-level LED numerical models.

36 MATERIALS SCIENCE↗

The Sloan Digital Sky Survey Reverberation Mapping Project: An investigation of biases in C iv emission line properties

We investigate the dependence on data quality of quasar properties measured from the C iv emission line region at high redshifts. Our measurements come from 32 epochs of Sloan Digital Sky Survey Reverberation Mapping Project spectroscopic observations of 482 z>1.46 quasars. We compare the differences between measurements made from the single-epoch (SE) and coadded spectra, focusing on the C iv λ1549 emission line because of its importance for studies of high-redshift quasar demographics and physical properties, including black hole masses. In addition to statistical errors increasing (by factors of ∼2–4), we find increasing systematic offsets with decreasing signal-to-noise ratio (S/N). The systematic difference (measurement uncertainty) in our lowest-S/N (<5) subsample between the SE and coadded spectrum (i) C iv equivalent width is 17 Å (31 Å), (ii) centroid wavelength is <1 Å (2 Å), and fractional velocity widths, ΔV/V, characterized by (iii) the line dispersion, σ {sub l}, is 0.104 (0.12), and (iv) the mean absolute deviation (MAD) is 0.072 (0.11). These remain smaller than the 1σ measurement uncertainties for all subsamples considered. The MAD is found to be the most robust line-width characterization. Offsets in the C iv FWHM velocity width and the C iv profile characterized by FWHM/σ {sub l} are only smaller than the statistical uncertainties when S/N > 10, although offsets in lower-S/N spectra exceed the statistical uncertainties by only a factor of ∼1.5 and may depend on the type of functional fit to the line. Characterizing the C iv line profile by the kurtosis is the least robust property investigated, as the median systematic coadded–SE measurement differences are larger than the statistical uncertainties for all S/N subsamples.

79 ASTRONOMY AND ASTROPHYSICS↗

X-ray tomography of feed-to-glass transition of simulated borosilicate waste glasses

The feed composition of a high level nuclear waste (HLW) glass melter affects the overall melting rate by influencing the chemical, thermophysical, and morphological properties of a relatively insulating cold cap layer over the molten phase where the primary feed vitrification reactions occur. Data from X ray computed tomography imaging of melting pellets comprised of a simulated high-aluminum HLW feed heated at a rate of 10°C/min reveal the distribution and morphology of bubbles, collectively known as primary foam, within this layer for various SiO 2 /(Li 2 CO 3 +H 3 BO 3 +Na 2 CO 3 ) mass fractions at temperatures between 600°C and 1040°C. To track melting dynamics, cross-sections obtained through the central profile of the pellet were digitally segmented into primary foam and a condensed phase. Pellet dimensions were extracted using Photoshop CS6 tools while the DREAM.3D software package was used to calculate pellet profile area, average and maximum bubble areas, and two-dimensional void fraction. The measured linear increase in the pellet area expansion rates – and therefore the increase in batch gas evolution rates – with SiO 2 /(Li 2 CO 3 +H 3 BO 3 +Na 2 CO 3 ) mass fraction despite an exponential increase in viscosity of the final waste glass at 1050°C and a lower total amount of gas-evolving species suggest that the retention of primary foam with large average bubble size at higher temperatures results from faster reaction kinetics rather than increased viscosity. However, viscosity does affect the initial foam collapse temperature by supporting the growth of larger bubbles. Because the maximum bubble size is limited by the pellet dimensions, larger scale studies are needed to understand primary foam morphology at high temperatures. This temperature-dependent morphological data can be used in future investigations to synthetically generate cold cap structures for use in models of heat transfer within a HLW glass melter.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Experimental and ab initio studies on sub-lattice ordering and magnetism in Co{sub 2}Fe(Ge{sub 1−x}Si{sub x}) alloys

Crystallographic and magnetic properties of bulk Co{sub 2}Fe(Ge{sub 1−x}Si{sub x}) alloys with 0 ≤ x ≤ 1, synthesized by arc melting method, have been studied. Co{sub 2}FeSi alloy has been found to crystallize with L2{sub 1} structure, but the super-lattice peaks are absent in the X-ray diffraction patterns of alloys containing high Ge concentration. Unit cell volume of this series of alloys decreased from 185.2 to 178.5 Å{sup 3} as Si content was increased from 0 to 1.00. All alloy compositions exhibit ferromagnetic behavior with a high Curie temperature (T{sub C}). T{sub C} showed a systematic variation with x. A comparison between the values of saturation magnetization (M{sub s}) and effective moment per magnetic atom p{sub c} estimated from the temperature dependent susceptibility data above T{sub C}, shows that the alloys have half-metallic character. The alloy with x = 0 follows Slater-Pauling (S-P) rule with M{sub s} of 5.99μ{sub B}. However, M{sub s} for the alloy with x = 1.00 was found to be 5.42μ{sub B}, which is lower than the value of 6.0μ{sub B} predicted by S-P rule. Since atomic disorder is known to affect the M{sub s} and electronic structure of these alloys, ab initio calculations were carried out to explain the deviation in observed M{sub s} from S-P rule prediction and the half-metallic character of the alloys. Ab initio calculations reveal that alloys with L2{sub 1} structure have M{sub s} value as predicted by S-P rule. However, introduction of 12.5% DO{sub 3} disorder, which occurs due to swapping of Co and Fe atoms in the unit cell, decreases M{sub s} of alloys with x > 0 from the S-P prediction to values obtained experimentally. The results analyzed from the view point of electronic structure of the alloys in different ordered states bring out the influence of disorder on the observed magnetic properties of these technologically important alloys.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A NEW METHOD FOR EXTRACTING SPIN-DEPENDENT NEUTRON STRUCTURE FUNCTIONS FROM NUCLEAR DATA

High-energy electrons are currently the best probes of the internal structure of nucleons (protons and neutrons). By collecting data on electrons scattering off light nuclei, such as deuterium and helium, one can extract structure functions (SFs), which encode information about the quarks that make up the nucleon. Spin-dependent SFs, which depend on the relative polarization of the electron beam and the target nucleus, encode quark spins. Proton SFs can be measured directly from electron-proton scattering, but those of the neutron must be extracted from proton data and deuterium or helium-3 data because free neutron targets do not exist. At present, there is no reliable method for accurately determining spin-dependent neutron SFs in the low-momentum-transfer regime, where nucleon resonances are prominent and the functions are not smooth. The focus of this study was to develop a new method for extracting spin-dependent neutron SFs from nuclear data. An approximate convolution formula for nuclear SFs reduces the problem to an integral equation, for which a recursive solution method was designed. The method was then applied to recent data from proton and deuterium scattering experiments to perform a preliminary extraction of spin-dependent neutron SFs in the resonance region. The extraction method was found to reliably converge for arbitrary test functions, and the validity of the extraction from data was verifi ed using a Bjorken integral, which relates integrals of SFs to a known quantity. This new information on neutron structure could be used to assess quark-hadron duality for the neutron, which requires detailed knowledge of SFs in all kinematic regimes.

Kahn, Y F↗