Search NASA⌕ Search

SEARCH · Search NASA

Results for “data reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

POLARIMETRY WITH THE GEMINI PLANET IMAGER: METHODS, PERFORMANCE AT FIRST LIGHT, AND THE CIRCUMSTELLAR RING AROUND HR 4796A

We present the first results from the polarimetry mode of the Gemini Planet Imager (GPI), which uses a new integral field polarimetry architecture to provide high contrast linear polarimetry with minimal systematic biases between the orthogonal polarizations. We describe the design, data reduction methods, and performance of polarimetry with GPI. Point-spread function (PSF) subtraction via differential polarimetry suppresses unpolarized starlight by a factor of over 100, and provides sensitivity to circumstellar dust reaching the photon noise limit for these observations. In the case of the circumstellar disk around HR 4796A, GPI's advanced adaptive optics system reveals the disk clearly even prior to PSF subtraction. In polarized light, the disk is seen all the way in to its semi-minor axis for the first time. The disk exhibits surprisingly strong asymmetry in polarized intensity, with the west side ≳ 9 times brighter than the east side despite the fact that the east side is slightly brighter in total intensity. Based on a synthesis of the total and polarized intensities, we now believe that the west side is closer to us, contrary to most prior interpretations. Forward scattering by relatively large silicate dust particles leads to the strong polarized intensity on the west side, and the ring must be slightly optically thick in order to explain the lower brightness in total intensity there. These findings suggest that the ring is geometrically narrow and dynamically cold, perhaps shepherded by larger bodies in the same manner as Saturn's F ring.

79 ASTRONOMY AND ASTROPHYSICS↗

Direct Imaging of Extra-Solar Planets in Star Forming Regions: Lessons Learned from a False Positive Around IM Lup

Context. Most exoplanet imagers consist of ground-based adaptive optics coronagraphic cameras which are currently limited in contrast, sensitivity and astrometric precision, but advantageously observe in the near-infrared window (1 5 m). Because of these practical limitations, our current observational aim at detecting and characterizing planets puts heavy constraints on target selection, observing strategies, data reduction, and follow-up. Most surveys so far have thus targeted young systems (1 100 Myr) to catch the putative remnant thermal radiation of giant planets, which peaks in the near-infrared. They also favor systems in the solar neighborhood (d less than 80 pc), which eases angular resolution requirements but also ensures a good knowledge of the distance and proper motion, which are critical to secure the planet status, and enable subsequent characterization. Aims. Because of their youth, it is very tempting to target the nearby star forming regions, which are typically twice as far as the bulk of objects usually combed for planets by direct imaging. Probing these interesting reservoirs sets additional constraints that we review in this paper by presenting the planet search that we initiated in 2008 around the disk-bearing T Tauri star IM Lup, which is part of the Lupus star forming region (140-190 pc). Methods. We show and discuss why age determination, the choice of evolutionary model for both the central star and the planet, precise knowledge of the host star proper motion, relative or absolute (between different instruments) astrometric accuracy (including plate scale calibration), and patience are the key ingredients for exoplanet searches around more distant young stars. Results. Unfortunately, most of the time, precision and perseverance are not paying off: we discovered a candidate companion around IM Lup in 2008, which we report here to be an unbound background object. We nevertheless review in details the lessons learned from our endeavor, and additionally present the best detection limits ever calculated for IM Lup. We also accessorily report on the successful use of innovative data reduction techniques, such as the damped-LOCI and iterative roll subtraction.

D Mawet↗

The coincidence counting technique for orders of magnitude background reduction in data obtained with the magnetic recoil spectrometer at OMEGA and the NIF

A magnetic recoil spectrometer (MRS) has been built and successfully used at OMEGA for measurements of down-scattered neutrons (DS-n), from which an areal density in both warm-capsule and cryogenic-DT implosions have been inferred. Another MRS is currently being commissioned on the National Ignition Facility (NIF) for diagnosing low-yield tritium-hydrogen-deuterium implosions and high-yield DT implosions. As CR-39 detectors are used in the MRS, the principal sources of background are neutron-induced tracks and intrinsic tracks (defects in the CR-39). The coincidence counting technique was developed to reduce these types of background tracks to the required level for the DS-n measurements at OMEGA and the NIF. Using this technique, it has been demonstrated that the number of background tracks is reduced by a couple of orders of magnitude, which exceeds the requirement for the DS-n measurements at both facilities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

LOGNORMAL INTENSITY DISTRIBUTION OF THE FAR-ULTRAVIOLET CONTINUUM BACKGROUND SHORTWARD OF Ly{alpha}

The diffuse far-ultraviolet (FUV) continuum radiation 'longward' of Ly{alpha} (1216 A) is well known to correlate with the dust emission at 100 {mu}m. However, it has been claimed that the FUV continuum background 'shortward' of Ly{alpha} shows very weak or no correlation with the 100 {mu}m emission. In this paper, the observational data of the diffuse FUV radiation by the Far Ultraviolet Spectroscopic Explorer (FUSE) are reexamined in order to investigate the correlation between the diffuse FUV radiation shortward of Ly{alpha} and the 100 {mu}m emission. Large fluctuations were confirmed in the linear-linear correlation plots, but good correlations were found in the log-log plots. The large fluctuations in the linear-linear plots, and thus poor correlations, between the FUV and 100 {mu}m intensities were attributed to the lognormal property of the FUV intensity distribution. The standard deviation of the intensity distribution of the FUV radiation shortward of Ly{alpha} was found to be {sigma}{sub logI} = 0.16-0.25. The result is consistent with that obtained not only for the FUV radiation longward of 1216 A but also with the dust column density measurements of various molecular clouds. This implies that most of the diffuse FUV radiation shortward of Ly{alpha} is dust-scattered light in the turbulent interstellar medium. The diffuse FUV data obtained from the Voyager missions were also investigated. However, much wider random fluctuations were found compared with the FUSE data, which is most likely due to the systematic difficulties in data reduction of the Voyager data.

79 ASTRONOMY AND ASTROPHYSICS↗

Subaru Hyper Suprime-Cam Survey of Cygnus OB2 Complex – I. Introduction, photometry, and source catalogue

ABSTRACT Low-mass star formation inside massive clusters is crucial to understand the effect of cluster environment on processes like circumstellar disc evolution, planet, and brown dwarf formation. The young massive association of Cygnus OB2, with a strong feedback from massive stars, is an ideal target to study the effect of extreme environmental conditions on its extensive low-mass population. We aim to perform deep multiwavelength studies to understand the role of stellar feedback on the IMF, brown dwarf fraction and circumstellar disc properties in the region. We introduce here, the deepest and widest optical photometry of 1.5○ diameter region centred at Cygnus OB2 in r2, i2, z, and Y-filters, using Subaru Hyper Suprime-Cam (HSC). This work presents the data reduction, source catalogue generation, data quality checks, and preliminary results about the pre-main sequence sources. We obtain 713 529 sources in total, with detection down to ∼28, 27, 25.5, and 24.5 mag in r2, i2, z, and Y-band, respectively, which is ∼3 – 5 mag deeper than the existing Pan-STARRS and GTC/OSIRIS photometry. We confirm the presence of a distinct pre-main sequence branch by statistical field subtraction of the central 18 arcmin region. We find the median age of the region as ∼5 ± 2 Myr with an average disc fraction of ∼9 per cent. At this age, combined with A $_V\, \sim$ 6 – 8 mag, we detect sources down to a mass range of ∼0.01–0.17 M⊙. The deep HSC catalogue will serve as the groundwork for further studies on this prominent active young cluster.

Gupta, Saumya (ORCID:0000000161843958)↗

Mass spectograph analysis

Computer program provides a means of rapid data reduction of mass spectrograph data. The methods used are suited to mechanization on a digital computer since they consist of the systematic search of a large amount of tabular data and the unknown.

Shores, J. P.↗

Trace-element analysis of 1000 environmental samples per year using instrumental neutron activation analysis

The technology and methods developed at the Plum Brook Reactor to analyze 1000 samples per year and report data on as many as 56 elements are described. The manpower for the complete analysis of 20 to 24 samples per week required only 3 to 3.5 hours per sample. The solutions to problems encountered in sample preparation, irradiation, and counting are discussed. The automation of data reduction is described. Typical data on various sample matrices are presented.

Sheibley, D. W.↗

Pressure contact sounding data for NASA's Atmospheric Variability Experiment (AVE 2)

The basic rawinsonde data are described at each pressure contact from the surface to sounding termination for the 54 stations participating in the AVE 2 pilot experiment. Soundings were taken at three-hour intervals from stations within the United States east of about 105 degrees west longitude. Methods of data reduction and estimates of data accuracy are discussed. Examples of the data records produced are shown. The AVE 2 pilot experiment was conducted as part of NASA's program to better understand and establish the extent of applications for meteorological satellite sensor data through correlative ground truth experiments and to provide basic experimental data for use in studies of atmospheric scales-of-motion interrelationships.

Fuelberg, H. E.↗

Voltage-offset reduction in data transmitters

Current source, which consists of inductor and two silicon diodes, is used to reduce output voltage offset and to make circuit less sensitive to conductance differences in output transistors.

Theall, C. E.↗

Orbit determination accuracies using satellite-to-satellite tracking

Results of the ATS-6/GEOS-3 and the ATS-6/NIMBUS-6 satellite-to-satellite tracking orbit determination experiments to be applied to the NASA geostationary Tracking and Data Relay Satellite System (TDRSS) starting in 1980, are presented. A satellite radio or laser tracking system performed measurements of such parameters as range, range ratio, angles and direction cosines to a spacecraft relative to a given tracking station. Resolutions of 1 meter in range and .03 cm/sec in range rate for a 1 second averaging were achieved showing that with proper data reduction procedures the tracking data relay satellite system should provide orbit determination capability comparable to what is normally obtainable from ground based systems.

Vonbun, F. O.↗

Space Shuttle Orbiter flight heating rate measurement sensitivity to thermal protection system uncertainties

A study was completed to determine the sensitivity of computed convective heating rates to uncertainties in the thermal protection system thermal model. Those parameters considered were: density, thermal conductivity, and specific heat of both the reusable surface insulation and its coating; coating thickness and emittance; and temperature measurement uncertainty. The assessment used a modified version of the computer program to calculate heating rates from temperature time histories. The original version of the program solves the direct one dimensional heating problem and this modified version of The program is set up to solve the inverse problem. The modified program was used in thermocouple data reduction for shuttle flight data. Both nominal thermal models and altered thermal models were used to determine the necessity for accurate knowledge of thermal protection system's material thermal properties. For many thermal properties, the sensitivity (inaccuracies created in the calculation of convective heating rate by an altered property) was very low.

Bradley, P. F.↗

Contribution of Doppler and interferometric tracking during the Magellan approach to Venus

On May 4, 1989, the Magellan spacecraft began its 463 day and 1.3 billion km earth to Venus interplanetary cruise. Magellan's Venus approach trajectory required prediction accuracy of 6.1 seconds in arrival time and 126 km in the position of closest approach to achieve a desired Venus orbit. Data collection from Magellan's SAR required an elliptical orbit with an inclination between 84 deg and 86 deg to the Venus equator, a period between 3.1 and 3.3 hours, a periapsis altitude within 275 km and 325 km and a latitude of periapsis between 0 deg and 10 deg North. Predictions of Magellan's arrival time and closest approach to Venus were derived from cruise trajectories determined exclusively from coherent two-way Doppler using both S-band (2.3 GHz) uplink/downlink and X-band (8.4 GHz) uplink/downlink and X-band spacecraft-quasar interferometric delay data. Analysis of data reduction strategies employing various data arc lengths and data combinations shows that interferometric tracking data, used in conjunction with Doppler, improved trajectory solution accuracy and robustness.

Graat, E. J.↗

Long-Lasting Science Returns from the Apollo Heat Flow Experiments

The Apollo astronauts deployed geothermal heat flow instruments at landing sites 15 and 17 as part of the Apollo Lunar Surface Experiments Packages (ALSEP) in July 1971 and December 1972, respectively. These instruments continuously transmitted data to the Earth until September 1977. Four decades later, the data from the two Apollo sites remain the only set of in-situ heat flow measurements obtained on an extra-terrestrial body. Researchers continue to extract additional knowledge from this dataset by utilizing new analytical techniques and by synthesizing it with data from more recent lunar orbital missions such as the Lunar Reconnaissance Orbiter. In addition, lessons learned from the Apollo experiments help contemporary researchers in designing heat flow instruments for future missions to the Moon and other planetary bodies. For example, the data from both Apollo sites showed gradual warming trends in the subsurface from 1971 to 1977. The cause of this warming has been debated in recent years. It may have resulted from fluctuation in insolation associated with the 18.6-year-cycle precession of the Moon, or sudden changes in surface thermal environment/properties resulting from the installation of the instruments and the astronauts' activities. These types of reanalyses of the Apollo data have lead a panel of scientists to recommend that a heat flow probe carried on a future lunar mission reach 3 m into the subsurface, approx 0.6 m deeper than the depths reached by the Apollo 17 experiment. This presentation describes the authors current efforts for (1) restoring a part of the Apollo heat flow data that were left unprocessed by the original investigators and (2) designing a compact heat flow instrument for future robotic missions to the Moon. First, at the conclusion of the ALSEP program in 1977, heat flow data obtained at the two Apollo sites after December 1974 were left unprocessed and not properly archived through NASA. In the following decades, heat flow data from January 1975 through February 1976, as well as the metadata necessary for processing the data (the data reduction algorithm, instrument calibration data, etc.), were somehow lost. In 2010, we located 450 original master archival tapes of unprocessed data from all the ALSEP instruments for a period of April through June 1975 at the Washington National Records Center. We are currently extracting the heat flow data packets from these tapes and processing them. Second, on future lunar missions, heat flow probes will likely be deployed by a network of small robotic landers, as recommended by the latest Decadal Survey of the National Academy of Science. In such a scenario, the heat flow probe must be a compact system, and that precludes use of heavy excavation equipment such as a rotary drill for reaching the 3-m target depth. The new heat flow system under development uses a pneumatically driven penetrator. It utilizes a stem that winds out of a reel and pushes its conical tip into the regolith. Simultaneously, gas jets, emitted from the cone tip, loosen and blow away the soil. Lab experiments have demonstrated its effectiveness in lunar vacuum.

Nagihara, S.↗

Characterization of the Eugene Stansbery-Meterclass Autonomous Telescope on Ascension Island

In a focused effort to meet full operational capability for NASA’s Eugene Stansbery Meter Class Autonomous Telescope (ES-MCAT), a thorough system characterization analysis was completed. NASA’s Orbital Debris Program Office (ODPO)utilizes ES-MCAT as the primary sensor for characterizing the geosynchronous orbit (GEO)environment to acquire photometric data of small, faint debris objects in or near GEO. ES-MCAT is located on Ascension Island in the middle of the Atlantic Ocean at nearly 8° South latitude and 15° West longitude. This location provides dark skies suited for faint object observations but is also continuously subject to a harsh environment exposed to volcanic ash and salt spray. To better assess the overall system performance of the optical instrument, a historical assessment of the system’s performance was conducted. This analysis investigated all systematic and optical operational data to determine the overall performance parameters for ES-MCAT.A complete optical system throughput calculation was performed to determine the optimal filter for observing orbital debris in GEO orbits. The responses of each optical component to the solar spectrum, with atmospheric absorption, were multiplied and integrated to give ES-MCAT’s total system response for various filters. With the highest flux values, the Sloan Digital Sky Survey (SDSS) r’ and g’ were determined to be the optimal filters for ES-MCAT observations. Further analysis with known GEO debris objects enabled the selection of the r’ filter for characterization of the GEO debris population. A detailed overview of the optical system throughput, data reduction, photometric and astrometric data, and other system characteristics that define ES-MCAT will be discussed in the subsequent paper.

C. Cruz↗

Characterization of the Eugene Stansbery-Meter Class Autonomous Telescope on Ascension Island

In a focused effort to meet full operational capability for NASA’s Eugene Stansbery-Meter Class Autonomous Telescope (ES-MCAT), a thorough system characterization analysis was completed. NASA’s Orbital Debris Program Office (ODPO) utilizes ES-MCAT as the primary sensor for characterizing the geosynchronous Earth orbit (GEO) environment to acquire photometric data of small, faint debris objects in or near GEO. ES-MCAT is located on Ascension Island in the middle of the Atlantic Ocean at nearly 8° South latitude and 14° West longitude. This location provides dark skies suited for faint object observations but is also continuously subject to a harsh environment exposed to volcanic ash and salt spray. To better assess the overall system performance of the optical instrument, a historical assessment of the system’s performance was conducted. This analysis investigated all systematic and optical operational data to determine the overall performance parameters for ES-MCAT. A complete optical system throughput calculation was performed to determine the optimal filter for observing orbital debris in GEO orbits. The responses of each optical component to the solar spectrum, with atmospheric absorption, were multiplied and integrated to give ES-MCAT’s total system response for various filters. With the highest flux values, the Sloan Digital Sky Survey (SDSS) r′ and g′ were determined to be the optimal filters for ES-MCAT observations. Further analysis with known GEO debris objects enabled the selection of the r′ filter for characterization of the GEO debris population. A detailed overview of the optical system throughput, data reduction, photometric and astrometric data, and other system characteristics that define ES-MCAT are discussed.

Corbin L Cruz↗

Launch Vehicle Loads Analysis Using Pressure-Sensitive Paint

Pressure transducers have been the instrumentation of choice for measuring unsteady flow phenomena. With recent advances in high-speed cameras, high-powered LEDs, and fast-response, pressure-sensitive paint, the unsteady pressure-sensitive paint (uPSP) technique has become a valuable alternative for production wind tunnel facilities, enabling time-resolved measurements of unsteady pressure fluctuations over a dense spatial grid on a wind tunnel model. Launch vehicle ground tests have proven to be a particularly well-matched application for uPSP due to the high signal level relative to tunnel background acoustics, relatively simple camera optical access, and rigidity of the model in wind-on test conditions. This presentation will highlight recent advances in data reduction of uPSP measurement data from recent launch vehicle wind tunnel tests at the NASA Ames Unitary Plan Wind Tunnel Complex (UPWT). The system can provide both localized surface pressure spectra as well as regional or zonal estimates of turbulence correlation model parameters. In addition, integrated vehicle-scale loads can be provided for buffet analysis. Data is reduced at the on-premise NASA Advanced Supercomputer (NAS) Division for just-in-time delivery of results during an ongoing wind tunnel test.

Pressure-Sensitive Paint↗