Search NASA⌕ Search

SEARCH · Search NASA

Results for “deployable structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Coaxial Nanowire Electrodes Enable Exceptional Fuel Cell Durability

Polymer-electrolyte-membrane fuel cells (PEMFCs) hold great promise for applications in clean energy conversion, but cost and durability continue to limit commercialization. This work presents a new class of catalyst/electrode architecture that does not rely on Pt particles or carbon supports, eliminating the primary degradation mechanisms in conventional electrodes, and thereby enabling transformative durability improvements. The coaxial nanowire electrode (CANE) architecture consists of an array of vertically aligned nanowires, each comprising an ionomer core encapsulated by a nanoscale Pt film. This unique design eliminates the triple-phase boundary and replaces it with two double-phase boundaries, increasing Pt utilization. It also eliminates the need for carbon support and ionomer binder, enabling improved durability and faster mass transport. Fuel cell membrane electrode assemblies based on CANEs demonstrate extraordinary durability in accelerated stress tests (ASTs), with only 2% and 5% loss in performance after 5000 support AST cycles and 30000 catalysts AST cycles, respectively. The high-power density and extremely high durability provided by CANEs can enable a paradigm shift from random electrodes based on unstable platinum nanoparticles dispersed on carbon to ordered electrodes based on durable Pt nanofilms, facilitating rapid deployment of fuel cells in transportation and other clean energy applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Online evolutionary neural architecture search for multivariate non-stationary time series forecasting

Time series forecasting (TSF) is one of the most important tasks in data science. TSF models are usually pre-trained with historical data and then applied on future unseen datapoints. However, real-world time series data is usually non-stationary and models trained offline usually face problems from data drift. Models trained and designed in an offline fashion can not quickly adapt to changes quickly or be deployed in real-time. To address these issues, this work presents the Online NeuroEvolution-based Neural Architecture Search (ONE-NAS) algorithm, which is a novel neural architecture search method capable of automatically designing and dynamically training recurrent neural networks (RNNs) for online forecasting tasks. Without any pre-training, ONE-NAS utilizes populations of RNNs that are continuously updated with new network structures and weights in response to new multivariate input data. ONE-NAS is tested on real-world, large-scale multivariate wind turbine data as well as the univariate Dow Jones Industrial Average (DJIA) dataset. These results demonstrate that ONE-NAS outperforms traditional statistical time series forecasting methods, including online linear regression, fixed long short-term memory (LSTM) and gated recurrent unit (GRU) models trained online, as well as state-of-the-art, online ARIMA strategies. Additionally, results show that utilizing multiple populations of RNNs which are periodically repopulated provide significant performance improvements, allowing this online neural network architecture design and training to be successful.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Strain-Driven Surface Reactivity in Magnesium-Ion Battery Cathodes

Successful deployment of a Mg-ion battery requires cathodes that can achieve reversible Mg intercalation and high energy density. Recent theoretical and experimental studies indicated that the overall transport is likely limited by sluggish Mg transport at the cathode-electrolyte interface and not Mg diffusion through bulk. Here, in this work, we investigated the surface electrochemical activity of Mg ions by using a spinel-structured manganese oxide thin-film model system and in situ X-ray scattering. In combination with post-mortem microscopy analysis, we found that magnesium insertion was more favorable than subsequent extraction near the surface of the Mg x Mn 2 O 4 film, resulting in overmagnesiation, and eventually amorphization of the surface. This structural irreversibility and high overpotential required for Mg extraction could explain significant voltage hysteresis and Mg surface enrichment previously observed in bulk cathodes. Density functional theory calculations suggested that the tendency for the Mg surface enrichment could be associated with Mg diffusion kinetics, which varies with the strain state evolved due to constrained film volume change during Mg insertion and extraction. Particularly, out-of-plane Mg migration was predicted to be favorable in the tensile strain rather than in the compressive case.

25 ENERGY STORAGE↗
DOE OSTI2024

Modeling Distributed Computing Infrastructures for HEP Applications

Predicting the performance of various infrastructure design options in complex federated infrastructures with computing sites distributed over a wide area network that support a plethora of users and workflows, such as the Worldwide LHC Computing Grid (WLCG), is not trivial. Due to the complexity and size of these infrastructures, it is not feasible to deploy experimental test-beds at large scales merely for the purpose of comparing and evaluating alternate designs. An alternative is to study the behaviours of these systems using simulation. This approach has been used successfully in the past to identify efficient and practical infrastructure designs for High Energy Physics (HEP). A prominent example is the Monarc simulation framework, which was used to study the initial structure of the WLCG. New simulation capabilities are needed to simulate large-scale heterogeneous computing systems with complex networks, data access and caching patterns. A modern tool to simulate HEP workloads that execute on distributed computing infrastructures based on the SimGrid and WRENCH simulation frameworks is outlined. Studies of its accuracy and scalability are presented using HEP as a case-study. Hypothetical adjustments to prevailing computing architectures in HEP are studied providing insights into the dynamics of a part of the WLCG and candidates for improvements.

Horzela, Maximilian↗
DOE OSTI2020

Risk-Informed MultiPphysics BestEestimate Plus Uncertainties (BEPU) Application Development of RELAP5-3D Perturbation Model

The United States nuclear industry is facing a strong challenge to ensure maximum safety while enhancing economic benefit. Safety is a key parameter to all aspects related to light water reactor (LWR) nuclear power plants (NPPs), especially cost savings. Since the goal is to extend the lifetimes of these NPPs, the traditional deterministic safety concept may not guarantee a current economic asset. The Light Water Reactor Sustainability (LWRS) Program has been promoting a wide range of research and development (R&D) in this field to maximize the safety, economics, and performance of these NPPs through improved scientific understanding. One of the best practices to achieve this goal is to identify and optimize safety margins, which can lead to cost reduction. To do this, under the LWRS framework, the Risk-Informed Systems Analysis (RISA) Pathway will focus on the optimization of safety margin and minimization of uncertainties to ensure both safety and economics at the highest level. The RISA Pathway will provide enhanced capabilities for analyzing and characterizing LWR systems performance by developing and demonstrating methods, tools, and data to enable risk-informed margins management (RIMM). The goals of the RISA Pathway are twofold: (1) deploy the risk-informed tools and methods that enable better representation of safety margins and factors that contribute to cost and safety; and (2) conduct advanced risk assessment applications with industry to support margin management strategies that enable more cost-effective plant operation. The tools and methods provided by the RISA Pathway will support effective margin management for both active and passive safety systems, structures, and components (SSC) of an NPP. The tools and methods used in the RISA Pathway should have high confidence and highest technical maturity for and implementation to industry at its current setting. They should also have a capability to support risk-informed decision making for both probabilistic and deterministic elements of safety. The RISA Pathway will, therefore, perform a comprehensive assessment of verification and validation (V&V) status of RISA Toolkit to enhance credibility RISA Toolkit which be used by industry. This report summarizes RELAP5-3D development activities for best estimated and uncertainty (BEPU) capability to support ongoing RISA Pathway pilot projects for risk informed uncertainty quantification applications. Work scope includes (1) development of initial perturbation model for selected closure laws and (2) testing of suitable probability distribution functions (PDF) for the selected correlations. Developed BEPU modules are tested with selected separate effect cases and compared with conventional thermal-hydraulics model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Overview of NETL’s Low Temperature CO2 Electrolysis Research

This keynote lecture will briefly overview diverse research areas of National Energy Technology Laboratory (NETL) to advance energy and environmental sustainability along with carbon management. Our electrochemistry efforts on carbon conversion directly support the US goal of achieving carbon-free power sector by 2035 and net zero emissions by 2050. Since CO2 electroreduction is highly structure-sensitive, NETL ongoing research has been focused on the rational design and engineering of electrocatalysts to facilitate the CO2 conversion to desirable products with good selectivity, activity, and durability. Different classes and types of electrocatalytic materials will be covered in this talk, from well-defined atomic-scale model catalysts to heterogenous, scalable powder systems at nano- and micro-scale for “real world” performance evaluation. Several spectroscopic, microscopic, and electrochemical characterization techniques along with computational findings will be additionally discussed to gain more insights into the structure-activity relation. The last part of this seminar will provide more detail on how NETL has transitioned from the most common aqueous H-type reactor for lab-scale validation to more realistic full electrolyzer cell in bench-scale prototype. The knowledge, electrocatalytic materials, and device validation achieved from NETL in-house research will be translated to industrial sector for large scale deployment and the anticipated outcome will help advance the development of low temperature CO2 electrolysis technologies.

Nguyen Phan, Thuy Duong↗
DOE OSTI2025

Uranyl Capture and Activation with Lewis Acids and Macrocyclic Hosts (Final Technical Report)

This document is the final report for the project with the title, “Uranyl Capture with Lewis Acids and Macrocyclic Hosts.” Nuclear power is attractive for meeting the current and future energy needs of society, in that it does not release carbon dioxide or other pollutants into the atmosphere during routine use. This motivated the project, because preparation of nuclear fuel, recovery of useful components from used fuel, and handling of waste materials remain significant impediments to further deployment of important nuclear technologies. In part, these problems arise from limited availability of chemical reactions that can reliably interconvert forms of uranium and other heavy elements during preparation and processing. For example, harsh and expensive chemicals are often required for making and breaking chemical bonds to uranium, and the reactions involved are inefficient. The overall objective of this research was to harness knowledge of chemical structure and bonding to develop a useful and predictive und

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Laser-induced graphene gas sensors for environmental monitoring

Artemesia tridentatais a foundational plant taxon in western North America and an important medicinal plant threatened by climate change. Low-cost fabrication of sensors is critical for developing large-area sensor networks for understanding and monitoring a range of environmental conditions. However, the availability of materials and manufacturing processes is still in the early stages, limiting the capacity to develop cost-effective sensors at a large scale. In this study, we demonstrate the fabrication of low-cost flexible sensors using laser-induced graphene (LIG); a graphitic material synthesized using a 450-nm wavelength bench top laser patterned onto polyimide substrates. We demonstrate the effect of the intensity and focus of the incident beam on the morphology and electrical properties of the synthesized material. Raman analyses of the synthesized LIG show a defect-rich graphene with a crystallite size in the tens of nanometers. This shows that the high level of disorder within the LIG structure, along with the porous nature of the material provide a good surface for gas adsorption. The initial characterization of the material has shown an analyte response represented by a change in resistance of up to 5% in the presence of volatile organic compounds (VOCs) that are emitted and detected byArtemisiaspecies. Bend testing up to 100 cycles provides evidence that these sensors will remain resilient when deployed across the landscapes to assess VOC signaling in plant communities. The versatile low-cost laser writing technique highlights the promise of low-cost and scalable fabrication of LIG sensors for gas sensor monitoring.

Chemistry↗
DOE OSTI2025

Vibrational Signatures of Electronic Properties in Renewable-Energy Catalysis

The objective of this research program is to discover and develop new approaches for ab initio computational simulations of molecular motion. Specifically, this program aims to decipher the connection between the underlying electronic structure and the accordant molecular vibrations in reactive ions and radicals for renewable-energy purposes. Recent experimental progress in ion sources and optical spectroscopies has unearthed considerable new inner-sphere detail for these complexes, but the connection between these spectral signatures and mechanistic information often remains elusive, to the continued frustration of experimentalists. For this purpose, new anharmonic vibrational frequency methods, along with a publicly deployed software package, will be developed. Working closely with committed experimental collaborators, this conceptual and computational framework will be used to explain the results of new spectroscopy experiments, focusing specifically on the inner-shell mechanisms of renewable-energy catalysis. The oxidation half of catalytic water-splitting chemistry will be a central focus, along with fundamental studies of the manner in which strong ions and radicals activate solvent as a chemical species. The resulting products of the research program will include openly available software and algorithms for the ab initio simulation of challenging vibrational spectra, as well as critical mechanistic insight into energy-focused catalytic processes that are opaque to other existing analytical techniques.

42 ENGINEERING↗
DOE OSTI2020

Success Using A Granular-Activated Carbon Filtration Swab to Rehabilitate Westbay{sup R} Multi-level Groundwater Monitoring Wells at the INL - 20544

In November 2015, tetrachloroethylene (PCE) was discovered in groundwater samples collected from a Westbay{sup R} multi-level groundwater monitoring well at the Idaho National Laboratory (INL).a Subsequent investigation determined that PCE was not present in the groundwater. The detected PCE was instead due to inadvertent contamination of the internal tubing fluid in the Westbay well-monitoring system, which is isolated from the surrounding groundwater. Further investigation showed that three of the 11 Westbay wells at the INL contained PCE-contaminated tubing fluid at concentrations above the U.S. Environmental Protection Agency's maximum contaminant level for drinking water (5 μg/L). Loose sediment at the bottom of some Westbay wells was also found to contain PCE; the three wells were then identified for rehabilitation as part of the INL well maintenance program. The unique construction of the Westbay wells - i.e., the small diameter (5.72 cm [2.25 in.]) and the depths of the tubing fluid ranging from 144.8 to 419 m (475 to 1,376 ft) below ground surface - posed unique challenges to the rehabilitation. Because the tubing fluid provides structural integrity, the fluid cannot be removed and then replaced without damaging the integrity of the Westbay well. Additionally, the small diameter of the systems and the associated depths limit the availability of equipment that can be used for the rehabilitation. After an evaluation of potential methods, it was determined that the use of an in-well, custom-fabricated, granular-activated-carbon filtration swab deployed via a wire line would provide the safest and most cost-effective method for rehabilitation. Westbay well rehabilitation started at well MIDDLE-2051 in late June 2018 and paused in December 2018 for the season. The PCE concentration in the tubing fluid at MIDDLE-2051 was initially reduced to a maximum concentration of 3.81 μg/L from a maximum of 642 μg/L, while the concentration of PCE in the sediment had been reduced from 5,360 to 2,270 μg/kg. Sampling was performed at MIDDLE-2051 again in August 2019, and the tubing fluid increased to a maximum concentration of 45.4 μg/L, while the concentration in the sediment decreased further to 1,890 μg/kg due to desorption of PCE from the sediment to the tubing fluid. Rehabilitation resumed at well MIDDLE-2050A in late August 2019, and the PCE concentration in the tubing fluid had been reduced to a maximum concentration of 19.0 μg/L. Although the method has been shown to be time-consuming, it has proven to be effective and safe for personnel performing the work and to the integrity of the well. Future sample data results at all wells will help determine an estimated completion of the rehabilitation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Deacetylation and Mechanical Refining Pathway for the Bioconversion of Sugarcane Bagasse

Advancing lignocellulose biorefining is imperative for the deployment of cellulosic (2G) biofuels. This work investigates the tailoring of the alkaline deacetylation and mechanical refining (DMR) pathway for the bioconversion of sugarcane bagasse. Experiments are conducted at laboratory and pilot scales, varying the pretreatment conditions (70–92 °C; 48–100 g NaOH /kg) and the mechanical refining technologies (PFI and disk refining). The pretreatments selectively solubilize acetyl groups (> 86%) and lignin (10–63%) while mostly preserving structural carbohydrates in the solid phase. Enzymatic hydrolysis generates hydrolysates of clean sugars (glucose and xylose), with sugar yields increasing up to 81% for glucose and 89% for xylose in response to delignification and mechanical refining. Biochemical methane potential assays reveal specific methane productions of up to 568 NmL CH₄ gVS⁻¹ for alkaline liquor monodigestion and 344 NmL CH₄ gVS⁻¹ for co-digestion with sugarcane vinasse from the conventional (1G) sugarcane ethanol, indicating a strong potential for bioenergy recovery from this process stream. Synergies are identified in integrating 1G ethanol, 2G DMR processing of bagasse, and anaerobic co-digestion of 1G vinasse and 2G DMR alkaline liquor. This technology enables sugarcane biorefineries to enhance the co-production of ethanol, methane, and concentrated streams of CO 2 .

09 BIOMASS FUELS↗
DOE OSTI2021

Turbulence theories and statistical closure approaches

When discussing research in physics and in science more generally, it is common to ascribe equal importance to the three components of the scientific trinity: theoretical, experimental, and computational studies. This review will explore the future of modern turbulence theory by tracing its history, which began in earnest with Kolmogorov’s 1941 analysis of turbulence cascade and inertial range [A.N. Kolmogorov, Dokl. Akad. Nauk SSSR, 30, 299, (1941); 32, 19, (1941)]. The 80th Anniversary of Kolmogorov’s landmark study is a welcome opportunity to survey the achievements and evaluate the future of the theoretical approach of turbulence research. Over the years, turbulence theories have been critically important in laying the foundation of our understanding of the nature of turbulent flows. In particular, the Direct Interaction Approximation (DIA) [R.H. Kraichnan, J. Fluid Mech., 5, 497 (1959)] and its subsequent development, known as the statistical closure approach, can be identified as perhaps the most profound single advancement. The remarkable success of the statistical closure has furnished a platform to study such essential concepts as the energy transfer process and interacting scales, and the roles of the straining and sweeping motions. More recently, the quasi-Lagrangian formulation of V. L’vov & I. Procaccia and Kraichnan’s solvable passive scalar model provided powerful ways to explore another fundamental aspect of turbulent flows, the phenomena of intermittency, and the associated anomalous scaling exponents. In the meantime, the theory of fluid equilibria has been developed to describe the large-scale structures that can emerge from turbulent cascades of two-dimensional and geophysical flows at a later time. And yet, despite all these successes, analytical treatments suffer from mathematical complexities. As a result, the utility of theoretical approaches has been limited to relatively idealized flows. On the other hand, in recent decades, computational abilities and experimental facilities have reached an unprecedented scale. Looking beyond the horizon, the imminent deployment of exascale supercomputers will generate complete datasets of the entire flow field of key benchmark flows, allowing researchers to extract additional measurements concerning fully developed, complex turbulent flow fields far beyond those available from the statistical closure theories. Some other developments that could potentially influence the future course of turbulence theories include the advancement of machine learning, artificial intelligence, and data science; likely disruptions arising from the advent of quantum computation; and the increasingly prominent role of turbulence research in providing more accurate climate scientific data. Finally, turbulence theorists can leverage these developments by asking the right questions and developing advanced, sophisticated frameworks that will be able to predict and correlate vast amounts of data from the other two components of the trinity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Enabling microbial electrolysis cell scale-up via electrochemistry-, hydrodynamic-, and microbial ecology-informed framework

Microbial electrolysis cells (MECs) can produce green hydrogen while removing organic contaminants from liquid waste streams by leveraging the metabolic activity of electroactive microorganisms. Despite their potential in a sustainable, circular economy, large-scale MECs that can treat relevant volumes of wastewater have failed to deliver performance proportional to their lab-scale counterparts. The reason behind this lower performance at scale remains unclear. Here, in this study, we developed a combined electrochemistry-, hydrodynamic-, and microbial ecology-informed framework to analyze and optimize MEC performance during scale-up, enabling accurate quantification of major limitations and the identification of strategies to overcome them, ultimately facilitating equivalent performance at scale. Applying this framework to the scale-up of a zero-gap MEC from 9 cm 2 electrode area to 100 cm 2 electrode area, resulted in similar maximum current densities in a 100 cm 2 MEC (21.7 ± 1.1 A/m 2 ) compared to a 9 cm 2 system (25.1 ± 2.7 A/m 2 ), as well as equivalent hydrogen production rates of 69.3 L/L-d (100 cm 2 ) and 67.7 ± 2.4 L/L-d (9 cm 2 ). COMSOL flow dynamics simulations were used to scale up the reactor configuration without negatively affecting electrolyte velocity and distribution in the cell, minimizing the increase in internal resistances during scale-up (11.7 ± 0.5 mΩm 2 at 9 cm 2 ; 19.7 ± 1.3 mΩm 2 at 100 cm 2 ). Microbial community structures were assessed at both scales using high-throughput sequencing, highlighting the differences of populations across electrode dimensions and operational parameters. The framework presented here accelerates the development of effective strategies toward the scale-up of MECs by furthering the understanding of how electrochemical, hydrodynamic, and microbial ecology parameters change as the reactor dimension is increased. Ultimately, this approach contributes to advancing electrochemical biotechnology toward practical deployment in energy-efficient wastewater treatment systems.

Flow path↗
DOE OSTI2022

CRADA Number NFE-19-07851 with Electro-Active Technologies Inc. (CRADA Final Report)

Cooperative Research and Development Agreement (CRADA) NFE-19-07851 between Oak Ridge National Laboratory (ORNL) and Electro-Active Technologies Inc. focused on developing a modular stack system to produce renewable hydrogen from food waste and renewable electricity. Developing technologies that can produce renewable, affordable hydrogen is key to enabling wider adoption of fuel cell technologies. Electro-Active has developed a microbial electrolysis process that leverages microbes growing on an anode to convert waste into electrons and protons, which are recombined and reacted with the help of an additional applied voltage to generate pure hydrogen at a cathode. The work done under the CRADA focused on developing a deeper understanding of the microbial community biocatalyst and how feedstock and process conditions affect structure and function in a prototype system in order to increase and sustain performance. Analysis indicates that developing a robust microbial community for conversion of food waste feedstocks at high rates within a microbial electrolysis system is possible, as well as maintaining this optimal microbial biocatalyst in larger systems. However, further work is needed to maintain performance in the system as it is scaled up to enable commercial deployment of the technology.

08 HYDROGEN↗
DOE OSTI2022

Chain Redistribution Stabilizes Coexistence Phases in Block Copolymer Blends

The nanoscale morphologies of block copolymer (BCP) thin films are determined by chain architecture. Experimental studies of thin film blends of different BCP chain types have demonstrated that blending can stabilize new motifs, such as coexistence phases. Here, we deploy coarsegrained molecular dynamics (MD) simulations in order to better understand the self-assembly behavior of BCP blend thin films. Here, we consider blends of lamella- and cylinder-forming BCP chains, studying their morphological makeup, the chain distribution within the morphology, and the underlying polymer chain conformations. Our simulations show that there are local concentration deviations at the scale of the morphological objects that dictate the local structure, and that BCP chains redistribute within the morphology so as to stabilize the structure. Underlying these effects are measurable distortions in the BCP chain conformations. The conformational freedom afforded by BCP blending stabilizes defects and allows coexistence phases to appear, while also leading to kinetic trapping effects. These results highlight the power of blending in designing the morphology that forms.

36 MATERIALS SCIENCE↗
DOE OSTI2026

AGR-5/6/7 Ceramography Report

The Advanced Gas Reactor (AGR) Fuel Development and Qualification Program was established in 2002 to conduct research and development on tri-structural isotropic (TRISO)-coated particle fuel for High Temperature Gas-cooled Reactors (HTGRs). All AGR irradiations have been completed: AGR-1 (Collin 2015), AGR-2 (Collin 2014), AGR-3/4 (Collin 2016) and AGR-5/6/7 (Pham 2021). The objectives of each program are presented in Figure 1.1. The purpose of the AGR-5/6/7 program was to provide a baseline fuel qualification data set to support licensing, deployment, and operation of HTGRs in the United States. To achieve these goals, the program includes fuel fabrication, irradiations of TRISO fuels and high-temperature materials, safety testing and post-irradiation examination (PIE), fuel performance modeling, and fission product (FP) transport (Sharp 2020). The AGR-5/6/7 work continues as a final irradiation program of the Advanced Reactor Technologies (ART) program, that began in February 2018 and ended in July 2020. The AGR-5/6/7 fuel compacts were irradiated for a total of approximately 360.9 effective full power days (EFPDs) (Stempien 2023), resulting in final burn-up values, on a per-compact basis, ranging from 5.66% to 15.26% fissions per initial heavy metal atom (FIMA), and fast fluence values ranging from 1.62×1025 n/m2 to 5.55×1025 n/m2 (E >0.18 MeV) (Stempien 2022)

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

The electric vehicles-solar photovoltaics Nexus: Driving cross-sectoral adoption of sustainable technologies

Residential and transportation energy consumption account for more than one-half of the overall energy consumption in the United States. Adoption of electric vehicles (EVs) can play a key role in decarbonizing the transportation sector, while the adoption of renewable energy sources (e.g., solar photovoltaics [PVs]) could bring similar benefits to the residential energy sector and in turn support transport electrification. Although the market shares for both EVs and PVs continue to grow, both of these emerging technologies are deployed rather disjointly, without considering the existence of potential similarities among users who own (or aspire to own) these technologies. This might be due to lack of understanding of the behavioral interdependence in consumer preferences toward these technologies. To fill this gap in knowledge, this study utilizes data from the 2018 WholeTraveler Transportation Behavior Study to develop an integrated model system that explores interactive EV and PV adoption behaviors. A structural equation model is employed that incorporates direct effects as well as error correlations among the adoption behaviors for EVs and PVs. Model results indicate that the adoption behavior for both these technologies is indeed interconnected and significantly influenced by attitudes, values, and personality traits. Findings from this research suggest that incentives (e.g., subsidies) that drive bundled adoption of EV-PV systems could accelerate the adoption of both of these sustainable technologies. In conclusion, this study highlights the need to consider transport and building energy-efficient technology adoption behavior in a single integrated structure.

14 SOLAR ENERGY↗
DOE OSTI2021

Review of Graphite Properties Relevant to Micro-Reactor Design

Microreactors are advanced reactors that are designed to be small, scalable, and portable with up to 20 MW power. These reactors could operate independently, or as part of a microgrid, without need of a frequent refueling. Micro-reactors are designed to be deployable to provide electric power in remote locations, therefore providing greater flexibility. Several micro-reactors are under development in the US. These reactors are based on advanced gas-cooled or heat-pipe concepts. While Graphite can be found in various applications, some high-temperature reactors plan to employ Graphite in their core components due to its role as a moderator and its ability to maintain its structural integrity when subjected to elevated temperatures and high neutron fluence. Although there is significant experience with use of Graphite in nuclear applications, there are still unknowns that should be addressed. Graphite properties depend on the graphite type and affected by the fabrication procedures. Material properties are functions of the temperature and irradiation dose. The fundamental properties also affected by the oxidation environment. Therefore, in-depth understanding of graphite properties, including the effect of irradiation, oxidation and other influencing parameters are required to evaluate the design accurately. This draft aims to provide a comprehensive review of material properties for Graphite relevant to micro reactor design. For this work, two distinct grades of graphite were considered, namely IG-110 and Mersen-2114. Physical, thermal, and mechanical properties for these grades were comparatively evaluated. The properties that are discussed in this draft aim to serve as a basis for design and safety analysis.

42 ENGINEERING↗