Search NASA⌕ Search

SEARCH · Search NASA

Results for “discrete element method,”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Convergence study of Rattlesnake solutions for the two-dimensional C5G7 MOX benchmark

This paper presents the convergence study of a specific transport scheme, self-adjoint angular flux (SAAF) formulation with the discrete ordinates (SN) method and continuous finite element method (CFEM), implemented with Rattlesnake, on solving the well known two-dimensional C5G7 MOX benchmark. Both the convergence in space and angle are studied. Numerical results show the convergence of the spatial and angular refinements.

Benchmark↗

3-D transient analysis of pebble-bed HTGR by TORT-TD/ATTICA3D

As most of the acceptance criteria are local core parameters, application of transient 3-D fine mesh neutron transport and thermal hydraulics coupled codes is mandatory for best estimate evaluations of safety margins. This also applies to high-temperature gas cooled reactors (HTGR). Application of 3-D fine-mesh transient transport codes using few energy groups coupled with 3-D thermal hydraulics codes becomes feasible in view of increasing computing power. This paper describes the discrete ordinates based coupled code system TORT-TD/ATTICA3D that has recently been extended by a fine-mesh diffusion solver. Based on transient analyses for the PBMR-400 design, the transport/diffusion capabilities are demonstrated and 3-D local flux and power redistribution effects during a partial control rod withdrawal are shown. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Preconditioned Mixed Spectral Element Methods for Elasticity and Stokes Problems

Preconditioned iterative methods for the indefinite systems obtained by discretizing the linear elasticity and Stokes problems with mixed spectral elements in three dimensions are introduced and analyzed. The resulting stiffness matrices have the structure of saddle point problems with a penalty term, which is associated with the Poisson ratio for elasticity problems or with stabilization techniques for Stokes problems. The main results of this paper show that the convergence rate of the resulting algorithms is independent of the penalty parameter, the number of spectral elements Nu and mildly dependent on the spectral degree eta via the inf-sup constant. The preconditioners proposed for the whole indefinite system are block-diagonal and block-triangular. Numerical experiments presented in the final section show that these algorithms are a practical and efficient strategy for the iterative solution of the indefinite problems arising from mixed spectral element discretizations of elliptic systems.

Pavarino, Luca F.↗

Discontinuous Finite Element Quasidiffusion Methods

Here in this paper, two-level methods for solving transport problems in one-dimensional slab geometry based on the quasi-diffusion (QD) method are developed. A linear discontinuous finite element method (LDFEM) is derived for the spatial discretization of the low-order QD (LOQD) equations. It involves special interface conditions at the cell edges based on the idea of QD boundary conditions (BCs). We consider different kinds of QD BCs to formulate the necessary cell-interface conditions. We develop two-level methods with independent discretization of the high-order transport equation and LOQD equations, where the transport equation is discretized using the method of characteristics and the LDFEM is applied to the LOQD equations. We also formulate closures that lead to the discretization consistent with a LDFEM discretization of the transport equation. The proposed methods are studied by means of test problems formulated with the method of manufactured solutions. Numerical experiments are presented demonstrating the performance of the proposed methods. Lastly, we also show that the method with independent discretization has the asymptotic diffusion limit.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structure preserving transport stabilized compatible finite element methods for magnetohydrodynamics

Here, we present compatible finite element space discretizations for the ideal compressible magnetohydrodynamic equations. The magnetic field is considered both in div- and curl-conforming spaces, leading to a strongly or weakly preserved zero-divergence condition, respectively. The equations are discretized in space such that transfers between the kinetic, internal, and magnetic energies are consistent, leading to a preserved total energy. We also discuss further adjustments to the discretization required to additionally achieve magnetic helicity preservation. Finally, we describe new transport stabilization methods for the magnetic field equation which maintain the zero-divergence and energy conservation properties, including one method which also preserves magnetic helicity. The methods' preservation and improved stability properties are confirmed numerically using a steady state and a magnetic dynamo test case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A posteriori error analysis for a cut cell finite volume method

We study the solution of a diffusive process in a domain where the diffusion coefficient changes discontinuously across a curved interface. We consider discretizations that use regularly-shaped meshes, so that the interface “cuts” through the cells (elements or volumes) without respecting the regular geometry of the mesh. Consequently, the discontinuity in the diffusion coefficients has a strong impact on the accuracy and convergence of the numerical method. This motivates the derivation of computational error estimates that yield accurate estimates for specified quantities of interest. For this purpose, we adapt the well-known adjoint based a posteriori error analysis technique used for finite element methods. In order to employ this method, we describe a systematic approach to discretizing a cut-cell problem that handles complex geometry in the interface in a natural fashion yet reduces to the well-known Ghost Fluid Method in simple cases. We test the accuracy of the estimates in a series of examples.

97 MATHEMATICS AND COMPUTING↗

Error analysis and correction of discrete solutions from finite element codes

Many structures are an assembly of individual shell components. Therefore, results for stresses and deflections from finite element solutions for each shell component should agree with the equations of shell theory. This paper examines the problem of applying shell theory to the error analysis and the correction of finite element results. The general approach to error analysis and correction is discussed first. Relaxation methods are suggested as one approach to correcting finite element results for all or parts of shell structures. Next, the problem of error analysis of plate structures is examined in more detail. The method of successive approximations is adapted to take discrete finite element solutions and to generate continuous approximate solutions for postbuckled plates. Preliminary numerical results are included.

Thurston, G. A.↗

Analysis of the pebble burnup profile in a pebble-bed nuclear reactor

It is known that in a pebble bed nuclear reactor, each fuel pebble draining through the core experiences a different amount of burnup depending on the precise trajectory that it follows. Understanding the burnup profile of pebbles is essential for reactor safety, as well as for fuel economy. Here, we introduce a method for constructing the burnup profile based on performing a discrete element simulation of the pebble drainage, followed by a burnup calculation in each individual pebble. This method is more accurate than previous approaches, and in particular it captures the extremal cases of pebble burnup. We demonstrate the method using the geometry, neutron flux data, and thermal characteristics from the HTR-10 reactor being developed at Tsinghua University. We examine pebble burnup during a single drainage cycle, and over multiple drainage cycles characteristic of normal reactor operation. Our results show that the presence of slow-moving boundary layers of pebbles near the reactor wall strongly influences the burnup profile. We perform a systematic study where the pebble–pebble and pebble–wall friction coefficients are independently varied, and we show that the strength of the boundary layers is a complex interplay of these two parameters.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Nonlinear diffusion acceleration for the multigroup transport equation discretized with S{sub N} and continuous FEM with rattlesnake

Nonlinear diffusion acceleration (NDA) can improve the performance of a neutron transport solver significantly especially for the multigroup eigenvalue problems. The high-order transport equation and the transport-corrected low-order diffusion equation form a nonlinear system in NDA, which can be solved via a Picard iteration. The consistency of the correction of the low-order equation is important to ensure the stabilization and effectiveness of the iteration. It also makes the low-order equation preserve the scalar flux of the high-order equation. In this paper, the consistent correction for a particular discretization scheme, self-adjoint angular flux (SAAF) formulation with discrete ordinates method (S{sub N}) and continuous finite element method (CFEM) is proposed for the multigroup neutron transport equation. Equations with the anisotropic scatterings and a void treatment are included. The Picard iteration with this scheme has been implemented and tested with RattleS{sub N}ake, a MOOSE-based application at INL. Convergence results are presented. (authors)

97 MATHEMATICS AND COMPUTING↗

Simulation of the RPI Reactor Critical Facility Core Using High-Fidelity Neutronics Code PROTEUS

The PROTEUS code is a high-fidelity three-dimensional (3D) deterministic neutron transport code developed by ANL under the DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. The code contains the SN2ND (second order discrete ordinates method) and two MOC transport solvers, MOCFE and MOCEX (first order methods of characteristics), based on unstructured finite element meshes which allow users to model complex or unconventional geometry reactor problems. Among the two MOC solvers which normally perform better than SN for heterogeneous geometry problems, MOCEX is based on a rigorous formulation using the two-dimensional (2D) MOC radially and the discontinuous Galerkin finite element method axially to overcome the drawbacks of MOCFE with the full 3D MOC representation which requires enormous memory and computational efforts. The Reactor Critical Facility (RCF), an open tank research reactor at the Rensselaer Polytechnic Institute (RPI), became operational in 1956 under the American Locomotive company and has been operating using low-enriched uranium fuel pins, which makes it the only university research facility to use fuel rods similar to operating commercial light water reactors (LWRs). This paper presents modeling and simulation results of the RCF using PROTEUS for code verification and validation which also supports an ongoing NEUP project in which a set of benchmark validation experiments for multiphysics coupling is being developed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Multifunctional Interface Method for Coupling Finite Element and Finite Difference Methods: Two-Dimensional Scalar-Field Problems

A multifunctional interface method with capabilities for variable-fidelity modeling and multiple method analysis is presented. The methodology provides an effective capability by which domains with diverse idealizations can be modeled independently to exploit the advantages of one approach over another. The multifunctional method is used to couple independently discretized subdomains, and it is used to couple the finite element and the finite difference methods. The method is based on a weighted residual variational method and is presented for two-dimensional scalar-field problems. A verification test problem and a benchmark application are presented, and the computational implications are discussed.

Ransom, Jonathan B.↗

A time-parallel method for the solution of PDE-constrained optimization problems

We study a time-parallel approach to solving quadratic optimization problems with linear time-dependent partial differential equation (PDE) constraints. These problems arise in formulations of optimal control, optimal design and inverse problems that are governed by parabolic PDE models. They may also arise as subproblems in algorithms for the solution of optimization problems with nonlinear time-dependent PDE constraints, e.g., in sequential quadratic programming methods. We apply a piecewise linear finite element discretization in space to the PDE constraint, followed by the Crank-Nicolson discretization in time. The objective function is discretized using finite elements in space and the trapezoidal rule in time. At this point in the discretization, auxiliary state variables are introduced at each discrete time interval, with the goal to enable: (i) a decoupling in time; and (ii) a fixed-point iteration to recover the solution of the discrete optimality system. The fixed-point iterative schemes can be used either as preconditioners for Krylov subspace methods or as smoothers for multigrid (in time) schemes. We present promising numerical results for both use cases.

97 MATHEMATICS AND COMPUTING↗

Improved Transport Processes for CCSM

In atmospheric modeling, global spectral methods have dominated weather and climate simulation for the past two decades. However, global methods based upon the spherical harmonic basis functions require expensive non-local communication and thus have difficulty in exploiting the full potential of current high-performance parallel computers. The primary objective of HOMME ((11)) is the development of a class of high-order scalable conservative atmospheric models for climate and general atmospheric modeling applications. The spatial discretizations are based on continuous Galerkin (spectral element method) and discontinuous Galerkin (DG). These are local methods based on high-order accurate spectral basis functions which have been shown to perform well on massively parallel supercomputers at any resolution (18). HOMME employs a cubed-sphere geometry (26) exhibiting none of the singularities present in conventional latitude-longitude spherical geometries. The element based formulation enables the use of general curvilinear geometries and adaptive conforming or non-conforming meshes.

54 ENVIRONMENTAL SCIENCES↗

Matrix methods and automation in structural engineering

The partial differential equations of motion of shell structures subject to arbitrary loads may be extremely difficult or even impossible to solve. Since the digital computer is now an available tool for the structural engineer, current research has been directed toward methods which involve matrix formulation of large systems of algebraic equations and matrix solutions for discrete elements rather than the solution of the partial differential equations. These methods require rapid and accurate computer solutions. Recognizing the accuracy problems inherent in working with large matrices, a comprehensive survey of available computer programs was performed for large matrix inversion and for eigenvalue and eigenvector solutions under a Research Grant from the National Aeronautics and Space Administration and the techniques are developed in this paper for using these programs most efficiently for structural applications. The contents of the paper include: automation of matrix compilation, methods of very large matrix inversion and solution of simultaneous equation, and techniques for finding eigenvalues and vectors. In addition, a finite element stiffness matrix approach developed at the Denver Research Institute for both plates and shells subject to arbitrary dynamic loads is described as it was instrumented with complete automation on the digital computer.

Anita S West↗

Calibration of parallel bond parameters in bonded particle models via physics-informed adaptive moment optimisation

This study proposes an automated calibration procedure for bond parameters in bonded discrete element modelling. By exploring the underlying physical correlations between microscopic parameters of bonds and macroscopic strength parameters of the continuum to be modelled, the microscopic shear strength and tensile strength are identified as independent variables for calibration purpose. Then a physics-informed iterative scheme is proposed to automatically approximate the bond parameters by viewing the micro-macro relation as an implicitly defined mathematical mapping function. As a result of highly non-convex features of this implicit mapping, the adaptive moment estimation (Adam), which is especially suitable for problems with noisy gradients, is adopted as the basic iterative scheme, in conjunction with other numerical techniques to approximately evaluate the partial derivatives involved. The whole procedure offers a simple and effective framework for bond parameter calibration. Finally, a numerical example of SiC ceramic is provided for validation. By compared with some existing calibration methods, the proposed method shows significant advantages in terms of calibration efficiency and accuracy.

42 ENGINEERING↗

High-Order Curvilinear Finite Element Methods for Lagrangian Hydrodynamics [High Order Curvilinear Finite Elements for Lagrangian Hydrodynamics]

The numerical approximation of the Euler equations of gas dynamics in a movingLagrangian frame is at the heart of many multiphysics simulation algorithms. Here, we present a general framework for high-order Lagrangian discretization of these compressible shock hydrodynamics equations using curvilinear finite elements. This method is an extension of the approach outlined in [Dobrev et al., Internat. J. Numer. Methods Fluids, 65 (2010), pp. 1295--1310] and can be formulated for any finite dimensional approximation of the kinematic and thermodynamic fields, including generic finite elements on two- and three-dimensional meshes with triangular, quadrilateral, tetrahedral, or hexahedral zones. We discretize the kinematic variables of position and velocity using a continuous high-order basis function expansion of arbitrary polynomial degree which is obtained via a corresponding high-order parametric mapping from a standard reference element. This enables the use of curvilinear zone geometry, higher-order approximations for fields within a zone, and a pointwise definition of mass conservation which we refer to as strong mass conservation. Moreover, we discretize the internal energy using a piecewise discontinuous high-order basis function expansion which is also of arbitrary polynomial degree. This facilitates multimaterial hydrodynamics by treating material properties, such as equations of state and constitutive models, as piecewise discontinuous functions which vary within a zone. To satisfy the Rankine--Hugoniot jump conditions at a shock boundary and generate the appropriate entropy, we introduce a general tensor artificial viscosity which takes advantage of the high-order kinematic and thermodynamic information available in each zone. Finally, we apply a generic high-order time discretization process to the semidiscrete equations to develop the fully discrete numerical algorithm. Our method can be viewed as the high-order generalization of the so-called staggered-grid hydrodynamics (SGH) approach and we show that under specific low-order assumptions, we exactly recover the classical SGH method. We also present numerical results from an extensive series of verification tests that demonstrate several important practical advantages of using high-order finite elements in this context.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Entropy-based artificial viscosity stabilization for non-equilibrium Grey Radiation-Hydrodynamics

The entropy viscosity method is extended to the non-equilibrium Grey Radiation-Hydrodynamic equations. The method employs a viscous regularization to stabilize the numerical solution. The artificial viscosity coefficient is modulated by the entropy production and peaks at shock locations. The added dissipative terms are consistent with the entropy minimum principle. A new functional form of the entropy residual, suitable for the Radiation-Hydrodynamic equations, is derived. We demonstrate that the viscous regularization preserves the equilibrium diffusion limit. The equations are discretized with a standard Continuous Galerkin Finite Element Method and a fully implicit temporal integrator within the MOOSE multiphysics framework. The method of manufactured solutions is employed to demonstrate second-order accuracy in both the equilibrium diffusion and streaming limits. Several typical 1-D radiation-hydrodynamic test cases with shocks (from Mach 1.05 to Mach 50) are presented to establish the ability of the technique to capture and resolve shocks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗