Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic shock experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Stress field measurements using quantitative schlieren

Quantitative schlieren analysis is extended here to optically transparent solids in quasi-static and dynamic experiments to measure stress distributions. The quasi-static experiments in polymethyl methacrylate (PMMA) compared refraction angles and stress gradients calculated from schlieren images to the analytical Flamant solution of a line load on a half-space. The quantitative schlieren measurements of the stress field in the thin sample with a load compared well to the analytical solution. The analysis method was then extended to explosive induced shock waves in PMMA. The explosive induced response of PMMA was experimentally studied using high-speed schlieren to visualize the shock propagation in conjunction with Photon Doppler Velocimetry (PDV) to record surface velocity histories. The stress state estimated from the schlieren images was compared to the stress calculated from the PDV measurements. High-speed imaging limitations caused the shock wave to not be fully resolved in the images, but was resolved in the PDV measurement. The stress state behind the shock calculated from the high-speed images followed a similar trend to the stress calculated from the PDV measurements.

Physics↗

Ignition of magnesium powders in shock wave induced flows

Ignition of magnesium powders, resulting from an interaction with incident shock wave-induced flows, has been studied. A numerical analysis of particle dynamics and heating is presented and compared with experimental measurements. The induction period is strongly dependent on convective heat transfer and not on chemical reaction rate. Experimentally observed ignition delays were on the order of 100 microns and were inversely dependent on shock strength and initial pressure, directly dependent on particle size and cloud concentration, and independent of oxygen concentration down to 2.3 percent oxygen. Good agreement between experiment and theory was realized.

Fox, T. W.↗

On the utility of finite element theory for computational fluid dynamics

An implicit finite element numerical solution algorithm is derived for the compressible Navier-Stokes equations expressed in generalized coordinates. The theoretical basis utilizes a Galerkin-Weighted Residuals formulation, and extremization of approximation error within the context of a multipole expansion. A von Neumann analysis for a simplified form indicates the algorithm fourth- to sixth-order phase accurate, with third-order dissipation for the elementary linear element construction. Performance is improved for the algorithm constructed using quadratic interpolation. Numerical experiments for shocked duct flows are employed to optimize the several algorithm parameters. Additional numerical solutions validate algorithm accuracy and utility for aerodynamics applications.

Baker, A. J.↗

The dynamics and control of fluctuating pressure loads in the reattachment region of a supersonic free shear layer

An experimental program to investigate the control of a turbulent, reattaching shear layer at Mach 2.9 is described. In preliminary experiments, schlieren photography and Rayleigh scattering were used to visualize the effects of air injection normal to the plane of the shear layer. Localized blowing was qualitatively found to increase the growth rate of the shear layer, the intensity of the turbulence, and the unsteadiness of the reattachment shock. However, uniformly distributed air injection did not appear to affect the flow strongly. These results suggest that three-dimensional disturbances are more effective for flow control than two-dimensional disturbances, and that there is a strong connection between the incoming turbulence and the shock motion in this flow.

Poggie, J.↗

X-ray imaging of liquid-liquid Mg cavitation

The coupling of dynamic loading platforms with synchrotron light sources have enabled experiments examining void formation in optically opaque materials. Much like spallation in a solid, cavitation occurs when rarefaction waves collide within a liquid. The resulting deformation leads to a complex flow field with numerous voids. It has been suggested that compaction of such a structure may be a significant source of ejecta (i.e. shallow bubble collapse). Experiments imaging supported and unsupported shocks interacting with a free surface in shock melted Mg with synchrotron radiation are presented. Here, the results are used to examine the structure of a cavitation plane that forms in the unsupported case and provide an estimate of the porosity within this region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental shock Hugoniot and melt boundary temperatures of aluminum

Aluminum is a ubiquitous component in dynamic compression, pulsed power, and other high energy density physics studies. Its high-pressure behavior and phase diagram are extensively studied standards in shockwave physics. While theoretical calculations and multiphase equations of state have been benchmarked to velocity measurements of loading and unloading waves, pressure and density under shock, and other mechanical data, experimental temperature data under these conditions have not been reported. We conducted a series of experiments shocking and releasing aluminum 6061 and 1100 samples into lithium fluoride windows. We measured temperature at the sample–window interface under steady compression and subsequent isentropic release. These results allow us to constrain the temperature of the solid Hugoniot and the boundary between the liquid and face-centered cubic solid phases.

Hartsfield, Thomas Murray [Sandia National Laborat↗

SPECTRUM OF THE SUPERNOVA RELIC NEUTRINO BACKGROUND AND METALLICITY EVOLUTION OF GALAXIES

The spectrum of the supernova relic neutrino (SRN) background from past stellar collapses including black hole formation (failed supernovae) is calculated. The redshift dependence of the black hole formation rate is considered on the basis of the metallicity evolution of galaxies. Assuming the mass and metallicity ranges of failed supernova progenitors, their contribution to SRNs is quantitatively estimated for the first time. Using this model, the dependences of SRNs on the cosmic star formation rate density (CSFRD), shock revival time, and equation of state (EOS) are investigated. The shock revival time is introduced as a parameter that should depend on the still unknown explosion mechanism of core collapse supernovae. The dependence on EOS is considered for failed supernovae, whose collapse dynamics and neutrino emission are certainly affected. It is found that the low-energy spectrum of SRNs is mainly determined by the CSFRD. These low-energy events will be observed in the Super-Kamiokande experiment with gadolinium-loaded water.

79 ASTRONOMY AND ASTROPHYSICS↗

Full Facility Shock Frame Simulations of the Electric Arc Shock Tube

Radiative heating computations are performed for high speed lunar return experiments conducted in the Electric Arc Shock Tube (EAST) facility at NASA Ames Research Center. The nonequilibrium radiative transport equations are solved via NASA's in-house radiation code NEQAIR using flow field input from US3D flow solver. The post-shock flow properties for the 10 km/s Earth entry conditions are computed using the stagnation line of a blunt-body and a full facility CFD (Computational Fluid Dynamics) simulation of the EAST shock tube. The shocked gas in the blunt-body flow achieves a thermochemical equilibrium away from the shock front whereas EAST flow exhibits a nonequilibrium behavior due to strong viscous dissipation of the shock by boundary layer. The full-tube flow calculations capture the influence of the boundary layer on the shocked gas state and provide a realistic fluid dynamic input for the radiative predictions. The integrated radiance behind the shock is calculated in NEQAIR for wavelength regimes from Vacuum-UltraViolet (VUV) to InfraRed (IR), which are pertinent to the emission characteristics of high enthalpy shock waves in air. These radiance profiles are validated against corresponding EAST shots. The full-tube simulations successfully predict a sharp radiance peak at the shock front which gets smeared in the test data due to the spatial resolution in the measurements. The full facility based radiance behind the shock shows a slightly better match with the test data in the VUV and Red spectral regions, as compared to that from a blunt-body based predictions. The UV radiance is very similar for both geometries and under-predicts the test behavior. The IR test data matches better with the blunt-body based predictions where the full-tube simulations show a significant over-prediction.

Radiation↗

X-ray Radiography and Scattering Diagnosis of Dense Shock-Compressed Matter

Highly coupled Boron plasma has been probed by spectrally resolving an x-ray source scattered by the plasma. Electron density was inferred from the inelastic feature in the collective scattering regime. In addition, the mass density inferred from the non-collective X-ray Thomson scattering has been tested with independent characterization using X-ray radiography in the same drive condition. High-intensity laser produced K-alpha radiation was used as a backlighter for these dynamically compressed plasma experiments providing a high temporal resolution of the measurements. Mass density measurements from both methods are in good agreement. The measurements yield a compression of 1.3 in agreement with detailed radiation-hydrodynamic modeling. From the charge state measured in the non-collective regime and the electron density measured in the collective regime the mass density can then be constrained to 3.15 {+-} 0.16.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Understanding the transport and break up of reactive ejecta

This manuscript investigates reactive- versus hydrodynamic-breakup processes of ejecta. For this paper, the reactive metal is cerium (Ce) and the nonreactive metal is tin (Sn), the nonreactive gas is helium (He) and the reactive gas is deuterium (D 2 ) or hydrogen (H 2 ). Experiments were performed in vacuum and the reactive- and nonreactive-gases at various pressures, where we endeavored to match the post-shock gas densities to differentiate between reactive- versus hydrodynamic-breakup processes. Hydrodynamic breakup sensitively links to the Weber number (gas density, liquid fragment diameter, surface tension, and the square of the relative velocity between the fragment and the gas), whereas reactive breakup links to the reactive dynamics which includes two processes. In one case the reactive metal breaks up into smaller fragments as rapidly as the reaction rate, and in the other a crust grows on the liquid fragments as the reactions occur, a diffusion limited process. In the latter case, the particle diameters increase with time as the crust grows. In this process, which is indicated by the data, particles breakup as the CeD 2 loses strength with increasing temperature, leaving an exponentially increasing diameter.

36 MATERIALS SCIENCE↗

Shock-induced chemistry of phenylacetylene

Gas gun-driven shock compression experiments of phenylacetylene using embedded electromagnetic gauging were used to obtain in situ particle velocity wave profiles at multiple Lagrangian positions at several shock input conditions. At shock conditions above 6 GPa, the input shock wave evolved over time and distance into a complex multiple wave structure due to shock-driven chemical reactions. The 3-wave structure was marked by a fast risetime 2nd wave, slower risetime 3rd wave, and unusual wave dynamics in the 1st wave. From the measured shock and particle velocities, the 1st wave, and intermediate and final product states associated with the chemical reactions were determined. A thermodynamically complete unreacted equation of state was calibrated to estimate the temperature rise along the shock locus. Use of this EOS with the measured 2nd and 3rd wave risetimes yielded highly statesensitive global reaction rates as a function of the shock locus.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solar wind three; Proceedings of the Third Conference, Pacific Grove, Calif., March 25-29, 1974

Papers are presented relating to the study of solar abundances, the evolution of the solar wind, solar corona dynamics, solar wind interactions, and stellar winds. Some of the topics covered include the nuclear composition of cosmic rays, the solar wind as deduced from lunar samples, spectral characteristics of flares, numerical simulation of interplanetary shock ensembles, radial gradient of solar wind velocity from 1 to 5 AU, the enhancement of solar wind fluctuations with scale size near the proton gyroradius, solar wind-Venus interaction observed from magnetic field experiment on Mariner 10, and binary stellar winds. Individual items are announced in this issue.

Russell, C. T.↗

Impact of Numerical Hydrodynamics in Turbulent Mixing Transition Simulations

Underresolved simulations are unavoidable in high Reynolds (Re) and Mach (Ma) number turbulent flow applications at scale. Implicit large-Eddy simulation (ILES) often becomes the effective strategy to capture the dominating effects of convectively driven flow instabilities. We evaluate the impact of three distinct numerical strategies in simulations of transition and turbulence decay with ILES: the Harten–Lax–van Leer (HLL) Riemann solver applying Strang splitting and a Lagrange-plus-Remap formalism to solve the directional sweep—denoted split; the Harten–Lax–Van Leer-Contact (HLLC) Riemann solver using a directionally unsplit strategy and parabolic reconstruction—denoted unsplit; and the HLLC Riemann solver using unsplit and a low-Ma correction (LMC)—denoted unsplit*. Three case studies are considered: (1) a shock tube problem prototyping shock-driven turbulent mixing, (2) the Taylor–Green Vortex (TGV) prototyping transition to turbulence, and, (3) an homogeneous isotropic turbulence (HIT) case, focusing on the impact of discretization on transition and decay from fixed well-characterized initial conditions. Significantly more accurate predictions are provided by the unsplit schemes, in particular, when augmented with the LMC. For given resolution, only the unsplit schemes predict the turbulent mixing transition after reshock observed in the shock tube experiments. Relevant comparisons of ILES based on Euler and Navier–Stokes equations addressing potential occurrence of low-Re regimes in the applications are presented. Unsplit schemes are instrumental in allowing to capture the spatial development of the TGV flow and its validation at prescribed Re with significantly less resolution. HIT analysis confirms higher simulated turbulence Re and increased small-scale content associated with the unsplit discretizations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Solid state streak camera prototype performance testing and future upgrades

Streak Cameras are an essential diagnostic tool used in shock physics and high energy density physics experiments. Such experiments require well calibrated temporally resolving diagnostics for studying events that occur on the nanosecond to microsecond time scales. The Nevada National Security Site (NNSS) and Sandia National Laboratories (SNL) have built a 42-channel solid state streak camera (SSSC) prototype as a proof of concept for use as a streak camera replacement. This work is part of an ongoing project to develop the technology to a level competitive with analog streak cameras. This manuscript discusses the device concept, results from electronic and laser testing, and recent improvements to increase the device’s dynamic range.

Plasma diagnostics - interferometry, spectroscopy ↗

Simulating Picosecond X-ray Diffraction from shocked crystals by Post-processing Molecular Dynamics Calculations

Calculations of the x-ray diffraction patterns from shocked crystals derived from the results of Non-Equilibrium-Molecular-Dynamics (NEMD) simulations are presented. The atomic coordinates predicted by the NEMD simulations combined with atomic form factors are used to generate a discrete distribution of electron density. A Fast-Fourier-Transform (FFT) of this distribution provides an image of the crystal in reciprocal space, which can be further processed to produce quantitative simulated data for direct comparison with experiments that employ picosecond x-ray diffraction from laser-irradiated crystalline targets.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Are We Adapting to Floods? Evidence from Global Flooding Fatalities

There has been a growing interest in understanding whether and how people adapt to extreme weather events in a changing climate. This article presents one of the first empirical analyses of adaptation to flooding on a global scale. Using a sample of 97 countries between 1985 and 2010, we investigate the extent and pattern of flood adaptation by estimating the effects of a country's climatological risk, recent flood experiences, and socioeconomic characteristics on its flood-related fatalities. Our results provide mixed evidence on adaptation: countries facing greater long-term climatological flooding risks do not necessarily adapt better and suffer fewer fatalities; however, after controlling for the cross-country heterogeneity, we find that more recent flooding shocks have a significant and negative effect on fatalities from subsequent floods. These findings may suggest the short-term learning dynamics of adaptation and potential inefficacy of earlier flood control measures, particularly those that promote increased exposure in floodplains. Our findings provide important implications for climate adaptation policy making and climate modeling.

54 ENVIRONMENTAL SCIENCES↗

Modeling used fuel response to normal conditions of transportation package drops to access geometric sensitivities

The US Department of Energy Used Fuel Disposition program is performing research to determine the loading conditions that used nuclear fuel (UNF) experiences during normal conditions of transportation (NCT). This loading environment includes mechanical shock and vibration as the UNF is transported by rail or truck, and it also includes potential package free drop conditions, which are the topic of this study. NCT drop test requirements for UNF package designs are defined in 10 CFR 71.71. The free drop test height is 30 cm for the UNF packages considered in this study. Explicit dynamic finite element models of generic rail and truck UNF packages containing a highly resolved 17x17 PWR fuel assembly are used to estimate the potential range of loading experienced by UNF during NCT horizontal package drops onto an unyielding surface. There are many variables and uncertainties that can affect the loading of UNF during this type of free drop scenario. This study focuses on geometric variables, such as gap conditions and small adjustments to the angle of impact, in a number of analysis cases. The LS-DYNA finite element analyses calculate detailed results for all the components of the fuel assembly. The results show that the peak localized axial strain in the fuel cladding is estimated to be 0.006421 (nominal) with an upper bound of 0.014511, based on the peak instantaneous bending moment of 63.65 N-m and other uncertainty factors. For the assumed low burnup condition of the UNF, the cladding yield strain is 0.011027 and the failure strain is 0.015574, which means that the calculated upper bound strain approaches the cladding failure limit without exceeding it. The peak shear force on the cladding was calculated to be 7879 N. This could be significant to cladding integrity if applied to the UNF in a situation where the fuel pellets do not support the shear transfer. Further evaluation is needed to determine if this is a credible threat to cladding integrity for these 30 cm free drop scenarios.

42 ENGINEERING↗

Pressure-induced phase transformations in Nb 2 O 5 from ab initio molecular dynamics simulations

Here, the equations of state for the H-, L- and T-Nb 2 O 5 polymorphs were investigated with density functional theory. The shock Hugoniot curves were predicted from ab initio molecular dynamics simulations along 300–2500 K isotherms. Enthalpies derived from simulations at 300 K show that the H → L transition occurs at 6.2 GPa, in agreement with the measured value of ~5.9 GPa, and is more favorable than the H → T transition. Pressure-induced amorphization (PIA) of L-Nb 2 O 5 is in the range ~18-25 GPa, consistent with experiments reporting PIA above 21.4 GPa. The simulated PIA of T-Nb 2 O 5 between ~16 and 26 GPa reproduces PIA observed above 19.2 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗