Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamical model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

A modified many-body dissipative particle dynamics model for mesoscopic fluid simulation: methodology, calibration, and application for hydrocarbon and water

The many-body dissipative particle dynamics (mDPD) is a prominent mesoscopic multiphase model for fluid transport in mesoconfinement. However, it has been a long-standing challenge for mDPD (and other multiphase-enabled DPD models) to accurately predict real-fluid static and dynamic properties simultaneously. We have developed a modified mDPD model to overcome the issue and a rigorous calibration approach that uses reference data, including experimental and/or molecular dynamics (MD) simulations to parameterise the modified mDPD for real fluids. We choose heptane as a representative example of hydrocarbon in source rocks to demonstrate the model's capability to accurately predict the equation of state (EOS), free surface tension, diffusivity, and viscosity. Our timing test shows that the modified mDPD is 400–500 times faster than its MD counterpart for simulating bulk heptane in equivalent volumes. To further demonstrate the robustness of the model, we revisited the benchmark problem of mesoscopic modelling of water, in which all the previous works on DPD reported only a limited portion of the water properties. Here, we show that the modified mDPD can provide accurate modelling of water static and dynamic properties and an EOS that matches the experimental data to a large range of confinement pressure.

42 ENGINEERING↗

FVCOM-plume – A Three-dimensional Lagrangian Outfall Plume Dilution and Transport Model for Dynamic Tidal Environments: Model Development

Although numerous steady-state effluent plume dilution models are in use, their application in tidal environments remains a challenge. Three-dimensional dynamic circulation models are also inadequate, often due to the lack of required resolution and simplifying assumptions. To overcome these limitations, we present FVCOM-plume—an outfall plume dilution and transport model that operates within the Finite Volume Coastal Ocean Model (FVCOM) framework. It provides simultaneous inclusion of near-field dilution and far-field plume transport processes. The near-field is based on UM3 model using Lagrangian Control Volume approach to compute buoyant plume trajectory and dilution from multiport diffusers. The far-field uses neutrally buoyant particles with point masses and the random walk method to solve unsteady advection-diffusion processes. A density kernel approach is used to compute concentrations at point locations and analyze far-field plume characteristics. The results demonstrate the ability of FVCOM-plume to simultaneously capture near-field and far-field effluent plume dynamics in tidal environments.

Plume Dilution Models↗

GEOMETRIC AND DYNAMICAL MODELS OF REVERBERATION MAPPING DATA

We present a general method to analyze reverberation (or echo) mapping data that simultaneously provides estimates for the black hole mass and for the geometry and dynamics of the broad-line region (BLR) in active galactic nuclei (AGNs). While previous methods yield a typical scale size of the BLR or a reconstruction of the transfer function, our method directly infers the spatial and velocity distribution of the BLR from the data, from which a transfer function can be easily derived. Previous echo mapping analysis requires an independent estimate of a scaling factor known as the virial coefficient to infer the mass of the black hole, but this is not needed in our more direct approach. We use the formalism of Bayesian probability theory and implement a Markov Chain Monte Carlo algorithm to obtain estimates and uncertainties for the parameters of our BLR models. Fitting of models to the data requires knowledge of the continuum flux at all times, not just the measured times. We use Gaussian Processes to interpolate and extrapolate the continuum light curve data in a fully consistent probabilistic manner, taking the associated errors into account. We illustrate our method using simple models of BLR geometry and dynamics and show that we can recover the parameter values of our test systems with realistic uncertainties that depend upon the variability of the AGN and the quality of the reverberation mapping observing campaign. With a geometry model we can recover the mean radius of the BLR to within {approx}0.1 dex random uncertainty for simulated data with an integrated line flux uncertainty of 1.5%, while with a dynamical model we can recover the black hole mass and the mean radius to within {approx}0.05 dex random uncertainty, for simulated data with a line profile average signal-to-noise ratio of 4 per spectral pixel. These uncertainties do not include modeling errors, which are likely to be present in the analysis of real data, and should therefore be considered as lower limits to the accuracy of the method.

79 ASTRONOMY AND ASTROPHYSICS↗

Structural dynamics model and response of the deployable reference configuration space station

The analytical models and results of a structural dynamics investigation of the reference initial operation and evolutionary configurations of the nine foot bay space station are presented. This investigation was carried out between April and August 1984 as part of a team effort to define a reference configuration for the first U.S. manned space station. The results presented herein serve as a guide, a point of departure and a standard for future NASA and contractor studies leading to the design of the Space Station. The reference initial operation configuration of the nine foot bay station was found to be very flexible, with its lowest mode between 0.096 and 0.138 Hertz depending on station attachments. However, for the transient load cases which were then available, internal member loads had positive margins of safety and preliminary results indicate that laboratory experiments which require quiescent conditions can be satisfied down to the order of 0.0001 g's.

Housner, J. M.↗

A "Kane's Dynamics" Model for the Active Rack Isolation System

Many microgravity space science experiments require vibratory acceleration levels unachievable without active isolation. The Boeing Corporation's Active Rack Isolation System (ARIS) employs a novel combination of magnetic actuation and mechanical linkages to address these isolation requirements on the International Space Station (ISS). ARIS provides isolation at the rack (International Standard Payload Rack (ISPR)) level. Effective model-based vibration isolation requires: (1) an appropriate isolation device, (2) an adequate dynamic (i.e., mathematical) model of that isolator, and (3) a suitable, corresponding controller. ARIS provides the ISS response to the first requirement. This paper presents one response to the second, in a state space framework intended to facilitate an optimal-controls approach to the third. The authors use "Kane's Dynamics" to develop a state-space, analytical (algebraic) set of linearized equations of motion for ARIS.

Hampton, R. D.↗

A "Kanes's Dynamics" Model for the Active Rack Isolation System

Many microgravity space-science experiments require vibratory acceleration levels unachievable without active isolation. The Boeing Corporation's Active Rack Isolation System (ARIS) employs a novel combination of magnetic actuation and mechanical linkages, to address these isolation requirements on the International Space Station (ISS). ARIS provides isolation at the rack (international Standard Payload Rack, or ISPR) level. Effective model-based vibration isolation requires (1) an appropriate isolation device, (2) an adequate dynamic (i.e., mathematical) model of that isolator, and (3) a suitable, corresponding controller. ARIS provides the ISS response to the first requirement. This paper presents one response to the second, in a state-space framework intended to facilitate an optimal-controls approach to the third. The authors use "Kane's Dynamics" to develop an state-space, analytical (algebraic) set of linearized equations of motion for ARIS.

Hampton, R. David↗

Molecular Dynamics Modeling of Tethered Organics in Confined Spaces

A computational method for constructing and evaluating the dynamic behaviour of functionalised hexagonal mesoporous silica (HMS) MCM-41 models is reported. HMS with three pore diameters (1.7, 2.2 and 2.9 nm) were prepared, and, from these, two series of derivative structures were constructed - one with 1,3-diphenylpropyl (DPP) tethers and the other with smaller dimethylsilyl (DMS) tethers attached to the mesopores internal surfaces. Comparison with experimental data shows that simulation results correctly predict the maximum tether density that can be achieved for each tether and each pore diameter. For the smaller pore models, the extent of DPP functionalisation that can be achieved is limited by the available pore volume. However, for the larger pore model, the extent of functionalisation is limited by access to potentially reactive sites on the pore surface. The dynamic behaviour of the models was investigated over a range of temperatures (240-648 K). At lower temperatures (< 400 K), the mobility of DPP tethers in the 2.9 nm model is actually less than that observed in either the 2.2 nm model or the 1.7 nm model due to the extensive non-bonded interactions that are able to develop between tethers and the silica surface at this diameter. At higher temperatures, the free ends of these tethers break away from the surface, extend further into the pore space and the DPP mobility in the 2.9 nm model is higher than in the smaller pore systems.

99 GENERAL AND MISCELLANEOUS↗

Interpreting experimental measurements of helium bubbles using stochastic cluster dynamics models of heterogeneous nucleation and growth in irradiated ferritic alloys

Among a number of other advantageous features, ferritic/martensitic steels are being considered as fusion reactor structural materials due to their low intrinsic swelling under irradiation. However, under high-energy neutron irradiation, He produced through (n, α) reactions stabilizes vacancy clusters, which then act as seeds for bubble formation and growth, negating the intrinsic swelling resistance of these alloys. Standard models of irradiation damage accumulation and microstructural evolution consider homogeneous nucleation as the basis for bubble formation and growth. However, this generally does not explain the large bubble densities and sizes observed experimentally under a number of different conditions. Here, we propose a more realistic physical model of bubble nucleation, formation, and growth designed to capture recent experimental measurements of He-bubble formation and evolution during co-implantation of He and Fe ions in model ferritic alloys. We find that experimental results are explained only when the following three features are considered simultaneously: (i) heterogeneous nucleation of He-vacancy bubbles at defect sinks (e.g., dislocations, grain boundaries, and second-phase precipitates), (ii) nucleation and growth of bubbles via the ‘trap mutation’ mechanism (i.e., spontaneous production of Frenkel pairs due to absorption of He atoms), and (iii) transition from a growth-limited, He-stabilized bubble regime to a ‘runaway’ void-type growth scenario. The model is implemented into a stochastic cluster dynamics framework that takes advantage of cluster size grouping methods to accelerate the simulations, allowing us to reach 10 dpa of simulated irradiated dose, and to capture cluster sizes in excess of 20 nm. Further, a careful extrapolation exercise conducted assuming classical nucleation theory leads to excellent agreement with the experimental measurements at 50 dpa of irradiation.

36 MATERIALS SCIENCE↗

Extension to the dynamic modeling of the large angle magnetic suspension test fixture

The Large Angle Magnetic Suspension Test Fixture (LAMSTF) is a laboratory scale proof-of-concept system. The configuration is unique in that the electromagnets are mounted in a circular planar array. A mathematical model of the system had previously been developed, but was shown to have inaccuracies. These inaccuracies showed up in the step responses. Eddy currents were found to be the major cause of the modeling errors. In the original system, eddy currents existed in the aluminum baseplate, iron cores, and the sensor support frame. An attempt to include the eddy current dynamics in the system model is presented. The dynamics of a dummy sensor ring were added to the system. Adding the eddy current dynamics to the simulation improves the way it compares to the actual experiment. Also presented is a new method of determining the yaw angle of the suspended element. From the coil currents the yaw angle can be determined and the controller can be updated to suspend at the new current. This method has been used to demonstrate a 360 degree yaw angle rotation.

Foster, Lucas E.↗

Algal Cultivation Growth Dynamic Modeling and Analysis

The purpose of this PTS was for Sandia National Laboratories (Sandia) to conduct collaborative research with Arizona Board of Regents for and on behalf of Arizona State University (ASU) to further develop algae growth and computational fluid dynamics (CFO) models that can predict and optimize pond design and cultivation methods to improve algal yield in outdoor algal ponds.

59 BASIC BIOLOGICAL SCIENCES↗

Algal Cultivation Growth Dynamic Modeling and Analysis

The purpose of this PTS was for Sandia National Laboratories (Sandia) to conduct collaborative research with Arizona Board of Regents for and on behalf of Arizona State University (ASU) to further develop algae growth and computational fluid dynamics (CFO) models that can predict and optimize pond design and cultivation methods to improve algal yield in outdoor algal ponds.

Gharagozloo, Patricia↗

Modeling dynamic fracture in granite under in situ conditions at high temperatures and pressures

Reproducing the in situ mechanical response of granite at a depth of a few kilometer under dynamic loading presents significant challenges. We have developed and calibrated a new thermo-mechanical model for granite using extensive experimental data from both quasi-static and dynamic test data. The model includes parameters which can be calibrated for a specific geologic setting. Using the model developed we have performed a series of 2D and 3D simulations to evaluate effects of in situ stress and temperature on the extent of damage surrounding underground explosions. We compare our results with available data for cavity size, plastic zone and peak velocity attenuation with range in granite.

58 GEOSCIENCES↗

Generalized 3D beam dynamics model for industrial traveling wave linacs design and simulations

Beam dynamics simulations in traveling wave (TW) accelerating structures with significant beam loading is a challenging problem. Some codes are capable of calculating the TW electromagnetic fields, and some can track particles through such fields, but most cannot treat both self-consistently. A few commercial codes can model the physics correctly at the expense of many processor-hour computations to obtain converged self-consistent solutions. However, simple, accurate equations of motion for intensive beam dynamics in TW accelerating structure analysis have been previously obtained by Masunov and subsequently implemented in the Hellweg code, which was developed at the Moscow Engineering-Physics Institute. Hellweg is based on equations that allow fast simulations of beam dynamics while taking into account such effects as beam loading, space charge, and external magnetic fields. In this paper, we describe in detail some recent improvements to the Hellweg physics kernel. We have generalized the Masunov results into a 3D set of equations of motion, which include all spatial components of the radiofrequency (RF) and external magnetic fields. We have also improved the Lapostolle space charge model to the general 3D ellipsoid form for any dimensions’ ratio, consideration for the particles outside the beam core, and the fields from the neighboring bunches that can exist in the real machine. These modifications allow approaching the Hellweg accuracy to the self-consistent commercial codes while keeping the simulation time short, which is essential during the linac design and optimization stage. The implementation of these new capabilities in Hellweg is carefully benchmarked against other codes and analytical calculations. The code is freely available with an open source license.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of a Computational Fluid Dynamics Model for a High-Speed Centrifugal Compressor

Computational fluid dynamics (CFD) has become widely used in the design and analysis of turbomachinery components such as centrifugal compressors. However, CFD is only a limited representation of experimental cases and struggles to model complex flows or can lack small model details to increase computation speed. To make advancements in compressor technology, designers need tools like CFD that can help them predict flow behavior in new designs. The High Efficiency Centrifugal Compressor (HECC) was designed by United Technologies Research Center (UTRC) for NASA to investigate the difficulties behind improving centrifugal compressor technology and to provide an open case to the turbomachinery research community. CFD analysis was completed by UTRC to aid in the design process. The pre-test study significantly overpredicted the compressor’s performance, and while post-test analysis was more representative, its results have yet to be publicly available. CFD technology has also since improved in recent years. In this study, a high-fidelity computational model for the vaneless configuration of HECC operating at its design point was developed and compared to an equivalent experimental case. This model incorporated GPU versions of mesh generation and solver codes from AeroDynamic Solutions, Inc. The development of such a model is significant since there has yet to be a published numerical simulation of HECC’s vaneless configuration. Additionally, the use of GPU codes decreases computation times for the model, which has allowed for the inclusion of impeller blade fillets. Initial results showed a general overprediction of compressor performance by the model. Predictions were more accurate for the impeller compared to predictions for the full compressor stage. Spanwise analyses showed that the model tended to follow flow behavior patterns exhibited in the experiment. Beyond this study, this model will be iterated upon and experimentally validated to further examine HECC performance.

centrifugal compressor↗

Static and dynamic modeling of steam integration for a NuScale small modular reactor and pulp and paper mill coupling for carbon-neutral manufacturing

Small modular reactors (SMRs) are reactor designs producing less than 300 MWe and are generally planned for deployment as multimodule nuclear power plants. The possibility of factory-manufactured, flexibly sized plants expands the opportunities for nuclear power to different communities and industries, including manufacturing plants that currently utilize fossil fuels to produce both steam and electricity. This paper examines the feasibility of coupling a NuScale SMR with a midsize pulp and paper mill in the Southeastern United States. A steady-state mill model was developed in Aspen HYSYS, based on real data from the operation of the mill, and modified it to include the SMR while maintaining steam quality requirements and making as few changes as possible to existing equipment. Dynamic plant models were also developed Dymola to demonstrate possible plant conditions, using three configurations. Preliminary results suggest that, while SMR coupling is physically feasible, its economic feasibility is limited by the differences in steam and electricity demands. Because of limitations in the amount of steam the mill can take from the SMR, sizing the SMR for the plant’s steam demand may result in an electricity deficit, or vice versa. Furthermore, dynamic analyses show that the addition of a thermal storage system could reduce such deficits, but this entails its own challenges. Each plant must determine the best configuration and control scheme for itself, based on its electricity and heat needs, including the peak duration and intensity for both. Ultimately, an implementation of SMRs with manufacturing processes would benefit from partnering with a local utility to purchase excess electricity generated by the SMR. This will help manufacturing facilities meet their environmental and cost-savings goals, in addition to meeting the need for cost-effective baseload power across the United States.

03 NATURAL GAS↗