Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Nanostructured Powders Made from Flame Spray Pyrolysis for Li-Ion Cathode

Flame processes are the most economic ones to produce fine powders and have been used to produce pigment titanium oxide and fused silica in large volumes. In this work a flame spray pyrolysis (FSP) process is used to make positive electrode materials for Li-ion battery, which is made of complex metal oxide powders, such as Li(Ni1/3Mn1/3Co1/3)O2. In particular, the work was focused on making the NMC materials with stoichiometric compositions and desired morphologies. During the pyrolysis process different morphologies can be formed, involving often powders with primary nanoparticles. Such nanostructures were found to have affected the battery performance. Detailed results of the synthesis, characterization, and battery testing of the NMC powder materials will be presented.

25 ENERGY STORAGE↗
DOE OSTI2023

Tungsten Electrodeposition

Tungsten is a refractory metal with a very high melting point (3422 °C), hardness (7.5 on Mohs hardness scale), and chemical resistance, making it useful in applications with extreme conditions. Electrodeposition is an attractive technique for coating metals because of its scalability and applicability to objects of intricate shape, though tungsten electrodeposition remains difficult. Some multi-step methods first coat either a sacrificial metal such as zinc or a layer of tungsten oxide which is then converted to metallic tungsten with WCl6 immersion (i.e. a redox replacement reaction) or heating in a reducing atmosphere, respectively. Single step deposition would save time and money, making it more viable on an industrial scale. Most reports detailing direct tungsten electrodeposition use molten salts which are energy intensive, hazardous, and difficult to maintain. Few reports have demonstrated single-step, low temperature electrodeposition deposition of tungsten in atmosphere. An article from 1931 reports successful metal tungsten electrodeposition from a highly basic sodium tungstate solution, though the authors reported very low current efficiency (<1%) and required heating to 80+ °C to obtain metallic films. This report outlines our attempts to electroplate tungsten from various solutions on different electrode materials, none of which succeeded. Our intent is to guide future researchers at Los Alamos National Laboratory that would attempt tungsten electrodeposition.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Microscopic 3D Graphene for High-Performance Supercapacitors with Ultra-High Areal Capacitance

Despite graphene being considered as an ideal supercapacitor electrode material, its use in commercial devices is limited because few methods exist to produce high-quality graphene at large scale and low-cost. We report a simple method to synthesize 3D graphene by graphenization of coal tar pitch with a K2CO3 catalyst. This produces 3D graphenes with high specific surface areas up to 2113 m2 g-1 and exceptional crystallinity (Raman ID/IG as low as ~ 0.15). The material has an outstanding specific capacitance of 182.6 F g-1 at a current density of 1.0 A g-1. This occurs at mass loading of 30 mg cm-2 which is 3 times higher than commercial requirements, yielding an ultra-high areal capacitance of 5.48 F cm-2. Moreover, the K2CO3 is recycled and reused over 10 cycles. The synthesis method and resulting electrocapacitive performance properties create new opportunities for using 3D graphene more broadly in practical supercapacitor devices.

Pham, Viet Hung↗
DOE OSTI2024

Using the Principals of Electrochemistry to Understand and Overcome the Complicated Degradation Mechanisms of Silicon Anodes in Lithium-Ion Batteries [Slides]

Battery technology is the most significant problem facing widespread market adoption of battery electric vehicles (BEVs). The low energy density of state-of-the-art lithium-ion electrode materials leaves BEV owners and prospective buyers with lower ranges than a comparable internal combustion engine (ICE) vehicle, and vulnerable to a nascent fast charging network. Silicon has the potential to increase the anode energy density by nearly ten times compared to the incumbent material (graphite) and make BEVs a more competitive transportation option. However, lithiated silicon is extremely reactive towards components of the electrolyte and forms a heterogeneous, complicated, and dynamic solid at its surface known as the solid electrolyte interphase (SEI). Ideally, the SEI would passivate the silicon surface, but continuous chemical degradation persists even when the battery is not operating. This reactivity reduces silicon anode lifetimes well below the necessary standards for BEVs. The NREL-led Silicon Consortium Project is dedicated to understanding and solving these mechanisms of degradation. Here, I will discuss an electrochemical method that provides deep insights into the silicon interface during battery operation. I will link these observations to fundamental electrochemical principals and how they translate into actionable strategies that extend the lifetime of silicon anodes.

25 ENERGY STORAGE↗
DOE OSTI2025

Reducing the Cost and Energy of Lithium-ion Battery Manufacturing using High Throughput Atomic Layer Deposition Processes

Forge Nano has recently developed an innovative strategy based on atomic layer deposition(ALD) of oxide coatings on battery separators and electrode materials. ORNL team worked with Forge Nano under this CRADA to construct larger format cells, validate battery and separator performance, and perform advanced materials characterization. It was observed that oxide coatings improve the battery cell performance in terms of both rate capability and long-term cyclic stability. ORNL team performed the research under this CRADA at DOE’s Battery Manufacturing Facility (BMF) at ORNL.

25 ENERGY STORAGE↗
DOE OSTI2025

Reducing the Cost and Energy of Lithium-ion Battery Manufacturing using High Throughput Atomic Layer Deposition Processes

Forge Nano has recently developed an innovative strategy based on atomic layer deposition (ALD) of oxide coatings on battery separators and electrode materials. ORNL team worked with Forge Nano under this CRADA to construct larger format cells, validate battery and separator performance, and perform advanced materials characterization. It was observed that oxide coatings improve the battery cell performance in terms of both rate capability and long-term cyclic stability. ORNL team performed the research under this CRADA at DOE’s Battery Manufacturing Facility (BMF) at ORNL.

25 ENERGY STORAGE↗
DOE OSTI2026

Novel Organosulfur-Based Electrolytes for Safe Operation of High Voltage Li-ion Batteries over a Wide Operating Temperature

This project addresses the failure of conventional electrolytes and enables high-voltage operation of lithium-ion batteries (LIBs) by developing a novel organosulfur-based electrolyte system. To achieve this goal, we first designed and synthesized new organosulfur solvents that functionalized with strong electron-withdrawing groups such as fluoroalkyl and cyano substituents. Through regio-specific molecular engineering, supported by theoretical calculations, we lowered the highest occupied molecular orbital (HOMO) energy levels of these molecules to increase their anodic stability for high-voltage operation. We then optimized the formulation of the organosulfur-based electrolyte with additives, co-solvents and salts tailored to the newly synthesized solvent molecules. In parallel, we utilized advanced spectroscopic techniques—including in situ FTIR, EIS, and DEMS—to thoroughly elucidate the mechanisms of interaction between the electrolyte and electrode materials. Finally, we evaluated 2 Ah pouch cells under both normal and extreme conditions. Pouch cells with the newly developed electrolyte system demonstrated >90% capacity retention after 500 cycles under 4.5 V operating voltage, >80% capacity retention after 1000 cycles in coin cell level. In addition, the cells exhibited high safety and reliable operation capability over a wide temperature range from −30 °C to +45 °C.

25 ENERGY STORAGE↗
DOE OSTI2023

Post Access Report: Initial testing of wave energy powered UV-C LED anti-biofouling system

In the experiment entitled “Initial Testing of Wave Energy Powered UV-C LED Anti-Biofouling System,” a UV-C LED was used to treat platinum-coated titanium coupons emulating CTD electrode material. An additional control set of coupons were exposed to seawater without the LED treatment. The experimental setup was deployed in seawater tanks at PNNL-Sequim’s Marine and Coastal Research Laboratory (MCRL) for the duration of six months. Tank seawater temperature data were collected for the duration of the experimental campaign. At two-month intervals triplicate sets of coupons were removed from both treatment and control test chambers and weighed to characterize biomass accumulation. After weighing, the coupons were photographed in initial condition, with a stain applied to highlight biofouling growth, and after rinsing off excess stain. These photographs were analyzed using PNNL’s Biofouling Growth Index (BGI) software and with a calculation of percentage dark pixels after conversion to grayscale. Additionally, at the final 6-month datapoint triplicate sets of control and test coupons were sent to PNNL-Richland’s Environmental Molecular Sciences Laboratory (EMSL) for scanning electron microscopy. All data organization and collection methods are described in further detail in the document “TEAMER_3newable_Data_Guide.pdf.” Biomass accumulation increased over time on both sets of coupons, and percent area biofouled demonstrated a similar trend. Analysis of the collected data resulted in the findings that treatment method has an impact on biofouling growth, though to a much less significant extent than time does. Additionally, qualitative findings included the presence of advanced life forms such as worms in the control test chamber, but not in the treated test chamber.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Enable High-Energy LiNi0.5Co0.2Mn0.3O2 by Ultra-Thin Coating through Wet Impregnation

A high cut-off voltage is required for nickel-rich layered oxide LiNixCoyMnzO2 (NCM) to meet the high energy density requirement of lithium-ion batteries in electric vehicles. However, such a high voltage application leads to an unstable interface between NCM and liquid electrolytes. To stabilize the interface, the facile wet impregnation method has been developed to apply an ultra-thin Al2O3 coating layer on the NCM particles. This coating layer was found to have a strong interaction with the NCM and resulted in Al-doped NCM at the surface structure of NCM. The change of surface structure can not only reduce the surface resistance of lithium diffusion of LiNi0.5Co0.2Mn0.3O2 (NCM523), but also stabilize the solid electrolyte interface between NCM523 and the electrolyte with the cut-off voltage of 4.5 V vs. Li/Li+. Compared to other coating methods, wet impregnation coating can provide an ultra-thin and uniform coating with surface doping on NCM particles. Furthermore, this scalable coating method can be applied to various electrode materials without adding much additional cost.

25 ENERGY STORAGE↗
DOE OSTI2024

Pulse Electrodeposition for Carbonate-Rich Deposits from Seawater

Seawater electrodeposition is gaining renewed interest in the context of sustainable development, both to build climate-resilient coastal infrastructure and for ocean-based decarbonization applications. Most of the applications benefit from CaCO 3 -rich deposits, but constant-voltage electrodeposition results in a mixture of CaCO 3 and Mg(OH) 2 , especially at higher voltages where precipitation rates are more desirable. The use of pulse voltages can help control interfacial pH that dictates the precipitation reactions. Here, we explore the use of pulse electrodeposition as a function of pulse frequency and duty cycle to control deposit composition. The most CaCO 3 -rich deposits were obtained under 10 Hz frequency and 10% duty cycle conditions for the voltage window investigated (-0.8 V to -1.2 V vs. SCE). While pulsing the voltage increases the amount of CaCO 3 deposited, the energy required per gram of CaCO 3 is significantly higher (14.5×) when compared to the base case of applying a constant voltage of -0.8 V vs. SCE. Further optimization of pulse conditions, electrode materials, and system configuration could lead to finding parameters that result in exclusively carbonate deposits without compromising precipitation rates, which may prove to be more useful for corrosion protection, coastal infrastructure, and other applications in sustainable development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Determination and Comparison of Parameters from Cyclic Voltammetry of LaCl 3 in Eutectic LiCl-KCl

Electrochemical measurements of LaCl 3 were obtained in eutectic LiCl-KCl at 773 K. Cyclic voltammetry data were acquired using a tungsten electrode LaCl 3 amounts in the molten salt in the range of 0.5 to 3.0 wt%. Both cyclic voltammetry and Tafel analyses of the data resulted in calculation of values for the charge transfer coefficient (0.262), diffusion coefficient (1.67 × 10 -5 cm 2 s -1 ), exchange current density (0.0148 to 0.0473 A cm -2 ), and charge transfer resistance (0.404 to 1.99 Ω) related to lanthanum ions in the molten salt. Calculated values were compared to those available in the literature. The values of parameters found in literature varied significantly in comparison to those in the present study due to dissimilar experimental conditions, e.g., electrode material, temperature, and LaCl 3 concentration.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1971

Durable cathodes for high-power inert-gas arcs

Cathode design minimizes evaporation of electrode material which may deposit on associated optical surfaces. It also results in stable operation and precise positioning of arc relative to optical collector. Innovation applies to high power light sources and to arcs used in industrial furnaces.

Decker, A. J.↗