Search NASA⌕ Search

SEARCH · Search NASA

Results for “height function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Global Statistics of Microphysical Properties of Cloud-Top Ice Crystals

Ice crystals in clouds are highly complex. Their sizes, macroscale shape (i.e., habit), mesoscale shape (i.e., aspect ratio of components) and microscale shape (i.e., surface roughness) determine optical properties and affect physical properties such as fall speeds, growth rates and aggregation efficiency. Our current understanding on the formation and evolution of ice crystals under various conditions can be considered poor. Commonly, ice crystal size and shape are related to ambient temperature and humidity, but global observational statistics on the variation of ice crystal size and particularly shape have not been available. Here we show results of a project aiming to infer ice crystal size, shape and scattering properties from a combination of MODIS measurements and POLDER-PARASOL multi-angle polarimetry. The shape retrieval procedure infers the mean aspect ratios of components of ice crystals and the mean microscale surface roughness levels, which are quantifiable parameters that mostly affect the scattering properties, in contrast to a habit. We present global statistics on the variation of ice effective radius, component aspect ratio, microscale surface roughness and scattering asymmetry parameter as a function of cloud top temperature, latitude, location, cloud type, season, etc. Generally, with increasing height, sizes decrease, roughness increases, asymmetry parameters decrease and aspect ratios increase towards unity. Some systematic differences are observed for clouds warmer and colder than the homogeneous freezing level. Uncertainties in the retrievals will be discussed. These statistics can be used as observational targets for modeling efforts and to better constrain other satellite remote sensing applications and their uncertainties.

Van Diedenhoven, Bastiaan↗
NASA NTRS2003

Concentration and Velocity Gradients in Fluidized Beds

In this work we focus on the height dependence of particle concentration, average velocity components, fluctuations in these velocities and, with the flow turned off, the sedimentation velocity. The latter quantities are measured using Particle Imaging Velocimetry (PIV). The PIV technique uses a 1-megapixel camera to capture two time-displaced images of particles in the bed. The depth of field of the imaging system is approximately 0.5 cm. The camera images a region with characteristic length of 2.6 cm for the small particles and 4.7 cm. for the large particles. The local direction of particle flow is determined by calculating the correlation function for sub-regions of 32 x 32 pixels. The velocity vector map is created from this correlation function using the time between images (we use 15 to 30 ms). The software is sensitive variations of 1/64th of a pixel. We produce velocity maps at various heights, each consisting of 3844 velocities. We break this map into three vertical zones for increased height information. The concentration profile is measured using an expanded (1 cm diameter) linearly polarized HeNe Laser incident on the fluidized bed. A COHU camera (gamma=1, AGC off) with a lens and a polarizer images the transmitted linearly polarized light to minimize the effects of multiply scattered light. The intensity profile (640 X 480 pixels) is well described by a Gaussian fit and the height of the Gaussian is used to characterize the concentration. This value is compared to the heights found for known concentrations. The sedimentation velocity is estimated using by imaging a region near the bottom of the bed and using PIV to measure the velocity as a function of time. With a nearly uniform concentration profile, the time can be converted to height information. The stable fluidized beds are made from large pseudo-monodisperse particles (silica spheres with radii (250-300) microns and (425-500) microns) dispersed in a glycerin/water mix. The Peclet number is sufficiently large that Brownian motion of the particles can be ignored and the Reynolds number sufficiently small that particle inertia is negligible. A packed particle bed is used to randomize and disperse the flowing fluid introduced by a peristaltic pump. The bed itself is a rectangular glass cell 8 cm wide (x), 0.8 cm deep and a height of 30.5 cm (z). The depth of field of the camera is approximately 0.5 cm so depth information is averaged. Over flow fluid is returned to the reservoir making a closed loop system. In these experiments the particles form a sediment approximately 5.7 cm high with the pump off and expand to 22 cm with the pump on. For the smaller particles the pump velocity is .5 millimeters per second and 1.1 millimeters per second for the large particles. At this concentration the bed has a very well defined top where particle concentration rapidly drops to zero.

McClymer, James P.↗
NASA NTRS1978

The determination of gravity anomalies from geoid heights using the inverse Stokes' formula, Fourier transforms, and least squares collocation

A numerical method for the determination of gravity anomalies from geoid heights is described using the inverse Stokes formula. This discrete form of the inverse Stokes formula applies a numerical integration over the azimuth and an integration over a cubic interpolatory spline function which approximates the step function obtained from the numerical integration. The main disadvantage of the procedure is the lack of a reliable error measure. The method was applied on geoid heights derived from GEOS-3 altimeter measurements in the calibration area of the GEOS-3 satellite.

Rummel, R.↗
NASA NTRS2014

Functional Sensory-Motor Performance Following Long Term Space Flight: The First Results of "Field Test" Experiment

The effect that extended-duration space flights may have on human space travelers, including exploration missions, is widely discussed at the present time. Specifically, there is an increasing amount of evidence showing that the physical capacity of cosmonauts is significantly reduced after long-duration space flights. It is evident that the most impaired functions are those that rely on gravity, particularly up right posture and gait. Because of the sensorimotor disturbances manifested in the neurology of the posture and gait space flight and postflight changes may also be observed in debilitating motion sickness. While the severity of particular symptoms varies, disturbances in spatial orientation and alterations in the accuracy of voluntary movements are persistently observed after long-duration space flights. At this time most of the currently available data are primarily descriptive and not yet suitable for predicting operational impacts of most sensorimotor decrements observed upon landing on planetary surfaces or asteroids. In particular there are no existing data on the recovery dynamics or functionality of neurological, cardiovascular or muscle performance making it difficult to model or simulate the cosmonauts' activity after landing and develop the appropriate countermeasure that will ensure the rapid and safe recovery of crewmembers immediately after landing in what could be hostile environments. However and as a starting position, the videos we have acquired during recent data collection following the long duration flights of cosmonauts and astronauts walking and performing other tasks shortly after return from space flight speak volumes about their level of deconditioning. A joint Russian-American team has developed a new study specifically to address the changes in crewmembers performance and the recovery of performance with the intent of filling the missing data gaps. The first (pilot) phase of this study includes recording body kinematics and quantifying the coordination and timing of relatively simple basic movements - transition from seated and prone positions to standing, walking, stepping over obstacles, tandem walking, muscle compliance, as well as characteristics of postural sway and orthostatic tolerance. Testing for changes in these parameters have been initiated in the medical tent at the landing site. The first set of experiments showed that during the first hour after landing, cosmonauts and astronauts were able to execute (although slower and with more effort than preflight) simple movements such as egress from a seated or prone position and also to remain standing for 3.5 minutes without exhibiting pronounced cardiovascular changes. More challenging tests, however, demonstrated a prominent reduction in coordination - the obstacle task, for example, was performed at much slower speed and with a marked overestimation of the obstacle height and tandem walking was greatly degraded suggesting significant changes in proprioception, brainstem and vestibular function. There is some speculation that the neural changes, either from the bottom-up or top down may be long lasting; requiring compensatory responses that will modify or mask the adverse responses we have observed. Furthermore, these compensatory responses may actually be beneficial, helping achieve a more rapid adaptation to both weightlessness and a return to earth.

Tomilovskaya, E. S.↗
DOE OSTI2023

Tank 27 Solids Disturbance Testing Using M-Star for the Impact of CSMP Usage on Blend Tank Mixing Effectiveness

Savannah River Mission Completion (SRMC) plans to operate Tank 27as a blend tank for future waste disposal operations. It is desirable to avoid additional worker exposure by using the planned commercial submersible mixing pump (CSMP) installations in Risers B2 and B4 to function as the blend pumps for prolonged blend tank operations. The purpose of this task is to evaluate the impacts to mixing across a range of pump installation heights from 1 to 201 inches above the tank floor. The CSMPs shall maintain adequate blending within a 24 hour maximum timeframe and an adequate nozzle discharge velocity as outlined in U-ESR-G-00030, using the specifications of the planned CSMPs listed in PO SRRA149971 and M-DS-G-00081. Specifications include: maximum pump diameter of D=22.5 in., dual nozzles placed tangentially opposed with nominal inside diameter of 2 in., total flow range (both nozzles combined) of 500 to 1950 GPM and maximum RPM of 1800. Tank 27 is expected to have a fill height maximum of 360". This analysis began by using results from the 2010 testing and applying them to the Tank 27 design to calculate a mixing time as a function of pump flow rate. These results were modified to account for the higher liquid level in Tank 27. Once the liquid level was increased to 360 inches, the results were modified to account for a higher viscosity in Tank 27 than in the testing. Once the viscosity was increased, the effect of changing pump elevation was applied to calculations of the mixing time in Tank 27. Finally, the uncertainty from the testing was included in the analysis to recommend a blend time as a function of pump flow rate and elevation. The conclusion from this study is that the particles in tank 27 will be suspended at both the 600 and 900 gpm flow rates. Only particles above 90 micron will not be suspended in significant amounts when the flow rate is 600 gpm. At 900 gpm even 100 micron particles were thoroughly suspended in the tank. From the series of simulations it has been concluded that it will not be possible to mix tank 27 at the proposed fluid flow rates and not suspend the solid particles at the bottom of the tank.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

An integrated framework of plant form and function: the belowground perspective

Summary Plant trait variation drives plant function, community composition and ecosystem processes. However, our current understanding of trait variation disproportionately relies on aboveground observations. Here we integrate root traits into the global framework of plant form and function. We developed and tested an overarching conceptual framework that integrates two recently identified root trait gradients with a well‐established aboveground plant trait framework. We confronted our novel framework with published relationships between above‐ and belowground trait analogues and with multivariate analyses of above‐ and belowground traits of 2510 species. Our traits represent the leaf and root conservation gradients (specific leaf area, leaf and root nitrogen concentration, and root tissue density), the root collaboration gradient (root diameter and specific root length) and the plant size gradient (plant height and rooting depth). We found that an integrated, whole‐plant trait space required as much as four axes. The two main axes represented the fast–slow ‘conservation’ gradient on which leaf and fine‐root traits were well aligned, and the ‘collaboration’ gradient in roots. The two additional axes were separate, orthogonal plant size axes for height and rooting depth. This perspective on the multidimensional nature of plant trait variation better encompasses plant function and influence on the surrounding environment.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1972

Theoretical analysis of rough-surface shadowing from point-source radiation.

The shadowing function, defined as the probability that a point on a rough surface will be illuminated by radiation from a source at fixed height above the surface, is considered. An exact expression for this probability is derived and evaluated approximately when the surface elevation is a normal random process. The effect of surface correlation is considered and shown to be appreciable. Several numerical computations of the shadowing function are presented.

Hardin, J. C.↗
DOE OSTI2025

A general kinetic framework for dislocation mobility derived from probabilistic cellular automaton simulations of the kink-pair mechanism

Dislocation mobility laws are essential components of dislocation-density-based crystal plasticity models. For dislocations governed by the kink-pair mechanism, however, existing formulations are typically limited to specific regimes due to the com plex interplay between stochastic kink-pair nucleation and lateral kink migration. In this work, we develop a general kinetic framework that expresses the average dislocation velocity as a function of mechanism-level variables: positive/negative kink pair nucleation rates, kink migration velocity, dislocation segment length, critical kink-pair width, and kink height. Probabilis tic cellular automaton simulations are used to capture the behavior of conceptual dislocation segments between the limiting conditions of migration outpacing nucleation on the one end and nucleation outpacing migration on the other. An elemen tary functional form that captures the system dynamics is suggested and fitted against the simulation results. This framework remains valid for arbitrary combinations of the six variables and is, therefore, compatible with any admissible constitutive re lations that describe their stress and temperature dependence. Comparisons with established approaches and experimental results confirm the robustness and physical consistency of the formulation, making it broadly applicable to material systems in which dislocation motion is governed by the kink-pair mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Enhancing climate-smart crop performance in arid agrivoltaics systems: effects of photovoltaic shading and soil amendments on tepary bean growth, yield, and associated soil microbiome

As climate change expands the world’s arid and semiarid regions, sustainable systems that integrate food and energy production are becoming increasingly critical. Agrivoltaics—co-locating crops with photovoltaic (PV) panels—offers a dual land-use strategy that mitigates environmental stress by shading crops, conserving soil moisture, and enhancing PV efficiency. While climate-smart crops like the tepary bean ( Phaseolus acutifolius ) are well adapted to heat and drought, little is known about how these crops and their associated soil microbiomes respond to the unique microclimates created by PV shading. This study evaluated tepary bean performance and plant–microbial interactions under PV-shade vs. no shade across three soil amendment treatments at two experimental sites. We assessed plant traits including germination, phenology, biomass, height, as well as yield and bean morphology, alongside shifts in soil microbial composition and functional potential. Plants grown under PV-shade were generally taller, with extended reproductive periods and higher yields: 42% of shaded plants produced beans compared to only 8% under full sun. Shaded plants also produced rounder, higher-quality beans, whereas non-shaded plants yielded flatter, less developed beans. Microbial community composition was more strongly influenced by amendment and site conditions than by shading alone. Key microbial taxa (e.g., Glomeromycetes, Desulfobacterota ) and predicted functions (e.g., denitrification, nitrogen-respiration, sulfate reduction) were associated with differences in plant performance. Finally, combining agrivoltaic systems with targeted soil amendments can enhance crop yield and soil microbial functionality—offering a promising strategy for sustainable agriculture in arid landscapes.

14 SOLAR ENERGY↗
DOE OSTI2021

Enhanced resistance to decay of imprinted nanopatterns in thin films by bare nanoparticles compared to polymer-grafted nanoparticles

We extend a previous study on the influence of nanoparticles on the decay of nanoimprinted polymer film patterns to compare the effects of “bare” silica (SiO 2 ) nanoparticles and SiO 2 nanoparticles with grafted polymer layers having the same chemical composition as the polymer matrix. This method involves nanoimprinting substrate-supported polymer films using a pattern replicated from a digital versatile disc (DVD), and then annealing the patterned polymer nanocomposite films at elevated temperatures to follow the decay of the topographic surface pattern with time by atomic force microscopy imaging after quenching. We quantified the relaxation of the pattern height (“slumping”) and determined the relaxation time τ for this pattern decay process as a function of nanoparticle filler type and concentration to determine how nanoparticle additives influence relative film stability. Attractive interactions between the bare nanoparticles and the polymer matrix significantly enhance the thermal resilience of the nanopatterns to decay, compared to those of the particle brushes, wherein the particle core interactions are screened from the matrix via the brush layer. A novel aspect of this method is that it readily lends itself to in situ film relaxation measurements in a manufacturing context. We observe that the relaxation time of the pattern relaxation exhibits entropy–enthalpy compensation in the free energy parameters governing the pattern relaxation process as a function of temperature, irrespective of the NP system used, consistent with our previous experimental and computational studies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Strongly Heated Turbulent Flow in a Channel with Pin Fins

Large-eddy simulations (LES) were performed to study the turbulent flow in a channel of height H with a staggered array of pin fins with diameter D = H/2 as a function of heating loads that are relevant to the cooling of turbine blades and vanes. The following three heating loads were investigated—wall-to-coolant temperatures of Tw/Tc = 1.01, 2.0, and 4.0 - where the Reynolds number at the channel inlet was 10,000 and the back pressure at the channel outlet was 1 bar. For the LES, two different subgrid-scale models—the dynamic kinetic energy model (DKEM) and the wall-adapting local eddy-viscosity model (WALE)—were examined and compared. This study was validated by comparing with data from direct numerical simulation and experimental measurements. The results obtained show high heating loads to create wall jets next to all heated surfaces that significantly alter the structure of the turbulent flow. Results generated on effects of heat loads on the mean and fluctuating components of velocity and temperature, turbulent kinetic energy, the anisotropy of the Reynolds stresses, and velocity-temperature correlations can be used to improve existing RANS models.

42 ENGINEERING↗
DOE OSTI2020

Applying Noether's theorem to matter in the Milky Way: evidence for external perturbations and non-steady-state effects from Gaia Data Release 2

We apply Noether's theorem to observations of main-sequence stars from the Gaia Data Release 2 archive to probe the matter distribution function of the Galaxy. That is, we examine the axial symmetry of stars at vertical heights $z$, $0.2 \le |z| \le 3$ kpc, to probe the quality of the angular momentum $L_z$ as an integral of motion. The failure of this symmetry test would speak to a Milky Way, in both its visible and dark matter, that is not isolated and/or not in steady state. The left-right symmetry-breaking pattern we have observed, north and south, reveals both effects, with a measured deviation from symmetry of typically 0.5%. We show that a prolate form of the gravitational distortion of the Milky Way by the Large Magellanic Cloud, determined from fits to the Orphan stream by Erkal et al., 2019, is compatible with the size and sign of the axial-symmetry-breaking effects we have discovered in our sample of up to 14.4 million main-sequence stars, speaking to a distortion of an emergent, rather than static, nature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1969

The laser radar above 30 kilometers

A short "state of the art' report on laser radar observations of the atmosphere at heights greater than 30 km is presented. Graphs of recent measurements of the Rayleigh backscattering function between 30 and 70 and above 50 kilometers are included.

Clemesha, B. R.↗
NASA NTRS1986

Parameterization of albedo, thermal inertia, and surface roughness of desert scrub/sandy soil surface

Spectral albedo, A sub n, for the direct solar beam is defined as A sub n (r sub i,s, theta sub 0) = r sub i exp(-s tan theta sub 0)1-I(s) where I(s) is the integral over all reflection angles describing the interception by the absorbing plants of the flux reflected from the soil, r sub i soil reflectance, assumed Lambertian, S the projection on a vertical plane of plants per unit surface area, and theta sub 0 is the solar zenith angle. Hemispheric reflectance for the direct solar beam equals 1-I(s) times the reflectance to the zenith. The values of s of 0.1, 0.2, and 0.3 respectively quantify sparse, moderately dense, and very dense desert scrub. Thin plants are assumed to be of negligible thermal inertia, and thus directly yield the absorbed insolation to the atmosphere. Surface thermal inertia is therefore effectively reduced. The ratio of surface roughness height to plant height is parameterized for sparse, moderately dense, and very dense desert-scrub as a function of s based on data expressing the dependence of this ratio on plant silhouette.

Otterman, J.↗
NASA NTRS1990

Cloud radiative forcing variability during FIFE

The present study evaluates a set of radiative flux surface measurements, concomitant with other meteorological observations, so as to derive the cloud radiative forcing at the surface. The forcing is analyzed in terms of variability and relation to other meteorological parameters. Both SW and LW cloud forcings show a very large temporal variability due to the changing cloudiness and to measurements and computational uncertainties. No dominant correlation between either components of the cloud radiative forcing and cloudiness were found using sky camera data. This is explained by the fact that forcings are a function not only of cloudiness but also of cloud liquid water content and cloud base height. Surface cloud radiative forcing showed a rather large diurnal cycle with a minimum at local noon for the LW component and two pronounced minima at sunrise and sunset for the SW component.

Breon, Francois-Marie↗
NASA NTRS1994

A new approach for determining fully empirical altimeter wind speed model functions

A statistical technique is developed for determining fully empirical model functions relating altimeter backscatter (sigma(sub 0)) measurements to near-surface neutral stability wind speed. By assuming that sigma(sub 0) varies monotonically and uniquely with wind speed, the method requires knowledge only of the separate, rather than joint distribution functions of sigma(sub 0) and wind speed. Analytic simplifications result from using a Weibull distribution to approximate the global ocean wind speed distribution; several different wind data sets are used to demonstrate the validity of the Weibull approximation. The technique has been applied to 1 year of Geosat data. Validation of the new and historical model functions using an independent buoy data set demonstrates that the present model function not only has small overall bias and root mean square (RMS) errors, but yields smaller systematic error trends with wind speed and pseudowave age than previously published models. The present analysis suggests that generally accuracte altimeter model functions can be derived without the use of colocated measurements, nor is additional significant wave height information measured by the altimeter necessary.

Freilich, M. H.↗
NASA NTRS2003

Comparisons of Gas-phase Temperature Measurements in a Flame Using Thin-Filament Pyrometry and Thermocouples

Less-intrusive, fast-responding, and full-field temperature measurements have long been a desired tool for the research community. Recently, the emission of a silicon-carbide (SiC) fiber placed in a flowing hot (or reacting) gas has been used to measure the temperature profile along the length of the fiber. The relationship between the gas and fiber temperature comes from an energy balance on the fiber. In the present work, we compared single point flame temperature measurements using thin-filament pyrometry (TFP) and thermocouples. The data was from vertically traversing a thermocouple and a SiC fiber through a methanol/air diffusion flame of a porous-metal wick burner. The results showed that the gas temperature using the TFP technique agreed with the thermocouple measurements (25.4 m diameter wire) within 3.5% for temperatures above 1200 K. Additionally, we imaged the entire SiC fiber (with a spatial resolution of 0.14 mm) while it was in the flame using a high resolution CCD camera. The intensity level along the fiber length is a function of the temperature. This results in a one-dimensional temperature profiles at various heights above the burner wick. This temperature measurement technique, while having a precision of less than 1 K, showed data scatter as high as 38 K. Finally, we discuss the major sources of uncertainty in gas temperature measurement using TFP.

Struk, Peter↗
NASA NTRSDate not supplied

NASA TROPOMI Aerosol Products: Algorithmic Upgrades and Preliminary Evaluation

This poster presentation describes an expanded NASA TROPOMI (Tropospheric Monitoring Instrument)aerosol algorithm (N-TROPOMAER) that takes advantage of TROPOMI observations in the ultraviolet and visible spectral regions. The availability of the Oxygen B-band observations, and the unprecedentedly high spatial resolution (3.5 km X 5.5 km) for a hyper-spectral sensor are significant improvements for aerosol properties retrieval. The heritage N-TROPOMAER aerosol algorithm uses near-ultraviolet radiances at 354 nm and 388 nm from Sentinel 5 Precursor-TROPOMI for simultaneously retrieving aerosol optical depth (AOD), single-scattering albedo (SSA), aerosol absorption optical depth (AAOD), and above-cloud aerosol optical depth(ACAOD) at 388 nm, along with the qualitative UV aerosol index (UVAI). We have expanded the inversion capability beyond the UV, to retrieve AOD at 466 nm and 680 nm. Surface reflectance effects at466 nm are accounted for using a recently developed geometry-dependent surface Lambertian-equivalent reflectivity (GLER) product, which is derived from the top-of-atmosphere radiance computed with Rayleigh scattering and surface bidirectional reflectance distribution function (BRDF) for the exact viewing geometry at the sensor’s spatial resolution. Aerosol layer height (ALH) and 680 nm AOD are simultaneously derived from observations at 680 nm and at the Oxygen-B band (688 nm). Another important upgrade is the use of time averaged total column carbon monoxide from the NASA GEOS-CF(Global Earth Observing System Composition Forecast) as a tracer of carbonaceous aerosols.

TROPOMI↗