Search NASA⌕ Search

SEARCH · Search NASA

Results for “hematite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Uranium Extraction From Laboratory Synthesized, Uranium-Doped Hydrous Ferric Oxides

The extractability of uranium (U) from synthetic hydrous ferric oxides has been shown to decrease as a function of mineral ripening, consistent with the hypothesis that the ripening process decrease contaminant lability. To evaluate this process, three hydrous ferric oxide (HFO) suspensions were co-precipitated with uranyl (UO22+) and maintained at pH 7.0 ± 0.1. Uranyl was added to the HFO post-precipitation in a fourth suspension. Two suspensions also contained either co-precipitated silicate (Si-U-HFO) or phosphate (P-U-HFO). After precipitation of the HFOs, at time intervals of one week, one month, six months, one year, and 2 years, aliquots of the suspensions were contacted with five solutions for a range of time. The extracts were analyzed for U and iron (Fe). The results are consistent with the hypothesis that U and Fe extractability will decrease as the mineral phase ripens. All extracting solutions exhibited some degree of selectivity for U, as the proportional extraction of U exceeded that for congruent dissolution. Micro X-ray diffraction analysis indicates the transformation from an amorphous phase to a material containing substantial proportions of crystalline goethite and hematite, except the P-U-HFO which remained primarily amorphous. Further analysis of the co-precipitates by the Mössbauer technique and scanning electron microscopy (SEM) provides further evidence of mineralogic ripening

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Surface Chemistry of Trimethyl Phosphate on α-Fe2O3

The chemistry of trimethyl phosphate (TMP) was examined on the (012) crystallographic face of hematite (α-Fe2O3) using temperature programmed desorption (TPD), high resolution electron energy loss spectroscopy (HREELS), static secondary ion mass spectrometry (SSIMS) and Auger electron spectroscopy (AES). TMP binds to Fe3+ sites on the clean α-Fe2O3(012) surface through lone pairs on the P=O oxygen atom. A small portion of adsorbed TMP desorbs without decomposition, however, the majority of adsorbed TMP decomposes in a two step process on the clean surface. The first step, occurring at or below room temperature (RT), likely involves displacement or substitution of one –OCH3 group to form surface methoxy groups and adsorbed dimethyl phosphate (DMP). In the second step, DMP decomposes above 500 K to a 1:1 ratio of gaseous methanol and formaldehyde with phosphate left on the surface. Identification of these steps was confirmed using the chemistry of methanol on the clean surface. Coadsorption of TMP and water led to a small degree of hydrolysis between these two molecules in the multilayer, but no significant change in the chemistry on the surface. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

10 SYNTHETIC FUELS↗

Electrostatic Potential of Specific Mineral Faces

Reaction rates of environmental processes occurring at hydrated mineral surfaces are primarily controlled by the electrostatic potential that develops at the interface. This potential depends on the structure of exposed crystal faces, as well as the pH and the type of ions and their interactions with these faces. Despite its importance, experimental methods for determining fundamental electrostatic properties of specific crystal faces such as the point of zero charge are few. Here we show that this information may be obtained from simple, cyclic potentiometric titration using a well characterized single-crystal electrode exposing the face of interest. The method exploits the presence of a hysteresis loop in the titration measurements that allows extraction of key electrostatic descriptors using the Maxwell construction. The approach is demonstrated for hematite (α-Fe 2 O 3 ) (001), and a thermodynamic proof is provided for the resulting estimate of its point of zero charge. Insight gained from this method will aid in predicting the fate of migrating contaminants, mineral growth/dissolution processes, mineral-microbiological interactions, and in testing surface complexation theories.

58 GEOSCIENCES↗

Structural and Morphological Features of Concentric Iron Oxide/Carbon Nanotubes Obtained from Phospholipids

Biologically active 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DC{sub 8,9}PC) nanotube-forming phospholipids (PLs) have been utilized as templates to prepare ferromagnetic nanotubes (FMNTs). Combining X-ray diffraction (XRD), selected area electron diffraction (SAD), high-resolution transmission electron microscopy (HRTEM), Raman, and Moessbauer spectroscopy measurements, FMNTs morphological features and chemical composition were determined. These studies showed that FMNTs consist of iron oxide/carbon/iron oxide concentric nanotubes with the amorphous carbon phase sandwiched between two iron oxide layers. The iron oxide phase consists of nanocrystalline magnetite (Fe{sub 3}O{sub 4}) which coexist as tetrahedral Fe{sup 3+} and octahedral Fe{sup 2.5+} sites containing minute quantities of hematite ({alpha}-Fe{sub 2}O{sub 3}) phase. The carbon phase consists of amorphous carbon forming an amorphous carbon nanotube (ACNT). Magnetic measurements showed that saturation magnetization (M{sub s}) of FMNTs is 79 emu/g, but upon removal of the iron oxide outer and inner layers, ACNTs become paramagnetic. The electrical resistivity ({rho}) of single FMNT is 3.3 x 10{sup -2} {Omega} {center_dot} m, which decreases to 5.06 x 10{sup -4} {Omega} {center_dot} m for ACNT. These magneto-electric properties can be easily tailored, depending upon desired applications and needs.

36 MATERIALS SCIENCE↗

Activating magnetite ores for aqueous ironmaking at high current densities

Low-temperature electrochemical cells reducing iron oxides to metal in alkaline electrolytes can support fully electrified steelmaking processes. Previous studies on these cells have primarily focused on high-surface-area hematite, Fe 2 O 3 , reactants whereas attempts to reduce suspensions of magnetite, Fe 3 O 4 —one of the two feedstocks for existing ironmaking reactors—have generally been limited to low rates of reaction (<30 mA cm −2 ). Here, in this study, we control the crystalline domain size of Fe 2 O 3 and Fe 3 O 4 particles in 10 M NaOH electrolytes to study how the nanoscale morphology of oxides controls the rate of electrochemical ironmaking. Rotating-ring disk electrode measurements of Fe 2+ , in situ Raman spectroscopy of the electrode surface, and ex situ electron microscopy were consistent with a hypothesized passivation process at Fe 3 O 4 surfaces that may prevent the continuous formation of soluble intermediates. Sufficiently small (<100 nm diameter) oxide particles yielded Fe partial current densities >160 mA cm −2 , a fivefold increase relative to previously reported rates for Fe 3 O 4 suspensions and comparable to active Fe 2 O 3 . Electron microscopy revealed that electrodeposited films were composed of micron-scale crystalline Fe domains with a porous film of Fe 3 O 4 nanoparticles and supports a model where Fe is grown primarily from soluble Fe 2+ intermediates. Based on these insights, inactive blast-furnace-grade iron-oxides were transformed into high surface area nanoparticles (1.6 to 229.2 m 2 g −1 ) via reprecipitation, leading to a ninefold enhancement in faradaic efficiency and an Fe partial current density of 120 mA cm −2 . When integrated with chlor-iron cells producing reagents for reprecipitation, this approach could lead to a cost-competitive process for electrochemical ironmaking from industrially relevant feedstocks.

TEM↗

The Byzantine Church of '40 Holy Martyrs' in Veliko Turnovo, Bulgaria: Pigments and Technique

The 'St. 40 Martyrs' church is the most famous medieval building in Veliko Turnovo, Bulgaria. It is located in Assenova mahala, just next to Tsarevets. It was built and its walls were painted during the reign of Bulgarian king Ivan Assen II after the victory against Epyrus despot Theodoros Comninos (1230 AD). It consists of two buildings - a six-column basilica and another, smaller building on its western wall, which was built later. During the presence of the Ottoman Turks, maybe until the first half of the 18th century, the church remained christian. When it was converted to a mosque, all the christian symbols in it were destroyed. The archeological researches on site were initiated in 1969. As it is clear, the 40 Martyrs church is a historical monument of culture with great significance. The church had murals, from the earlier period, but in the following years and especially during the Ottoman period, the church has suffered many and different destructions. Nevertheless, the very few pieces of murals that are rescued till nowadays provide important information for the technique and the pigments that were used on its wall paintings. In the present work, twelve series of samples from the wall paintings were studied in order to characterize the materials and the technique used for church iconography. The study was based on the micro-analytical techniques of the Fourier Transform Infrared micro-spectroscopy (mus-FTIR), the Optical Microscopy and the Scanning Electron Microscopy (SEM) coupled to an Energy Dispersive X-ray Spectrometer (EDS). In the FTIR spectra of all pigments the characteristic peaks of calcite were detected, confirming the use of fresco technique for the creation of murals. The combination of FTIR spectroscopy and SEM-EDS analysis, reveal the existence of lapis-lazuli for the blue color, green earth for the green color, cinnabar for the red color, calcite for the white color and carbon black for the black color. Moreover, in other chromatic layers, the presence of iron oxides (hematite and limonite) indicating the use of ochre for the yellow and red pigments, is identified. Finally, the surface of some samples was covered by a transparent and tensile material. This material was characterized by mus-FTIR spectroscopy as an organic substance, probably a natural resin that was used to protect the murals in the early ages.

36 MATERIALS SCIENCE↗

Heavy mineral distribution in stream sediment of Tapah area, Perak, Malaysia

This paper aims to provide the overview of occurrence, distribution and origin of the heavy minerals in the study area. A total of 45 selected stream sediment heavy mineral concentrate samples were panned using standard dulangs, dried and separated from other light minerals using bromoform. The heavy minerals were separated into different fractions at different amperes using Frantz Isodynamic magnetic separator. Mineral identification was done using binocular microscope augmented by X-ray diffraction analyses. Mineral abundance data were analysed graphically using triangular diagrams to show their origin. Dominant minerals present in the heavy mineral samples collected are ilmenite, cassiterite, tourmaline, zircon, topaz, and magnetite. The less common minerals, present in trace amounts are hematite, xenotime, allanite, monazite, rutile, anatase, leucoxene, chromite, garnet and olivine. Examination of the heavy mineral assemblage shows that they originated from granite batholiths of the Main Range, Changkat Rembian as well as from the metasedimentary rock in the area. The gold flakes present are found together with cassiterite and topaz indicating that gold originates from the mineralized veins contact-metamorphosed metasedimentary rocks. Almost all samples collected contain cassiterite grains in various amounts. From the mineral assemblage, the source of cassiterite originates from the mineralized quartz veins that cut granitic rocks of Main Range, Changkat Rembian as well as the metasedimentary rock in the area. Greisenized veins containing quartz, mica and tourmaline with the presence of wolframite and arsenopyrite also contribute to the presence of cassiterite in this study area.

36 MATERIALS SCIENCE↗

Photo-driven oxidation of water on α-Fe{sub 2}O{sub 3} surfaces: An ab initio study

Adopting the theoretical scheme developed by the Nørskov group [see, for example, Nørskov et al., J. Phys. Chem. B 108, 17886 (2004)], we conducted a density functional theory study of photo-driven oxidation processes of water on various terminations of the clean hematite (α-Fe{sub 2}O{sub 3}) (0001) surface, explicitly taking into account the strong correlation among the 3d states of iron through the Hubbard U parameter. Six best-known terminations, namely, Fe − Fe −O{sub 3}− (we call S{sub 1}), O− Fe − Fe − (S{sub 2}), O{sub 2}− Fe − Fe −(S{sub 3}), O{sub 3}− Fe − Fe − (S{sub 4}), Fe −O{sub 3}− Fe − (S{sub 5}), and O− Fe −O{sub 3}−(S{sub 6}), are first exposed to water, the stability of resulting surfaces is investigated under photoelectrochemical conditions by considering different chemical reactions (and their reaction free energies) that lead to surfaces covered by O atoms or/and OH groups. Assuming that the water splitting reaction is driven by the redox potential for photogenerated holes with respect to the normal hydrogen electrode, U{sub VB}, at voltage larger than U{sub VB}, most 3-oxygen terminated substrates are stable. These results thus suggest that the surface, hydroxylated in the dark, should release protons under illumination. Considering the surface free energy of all the possible terminations shows that O{sub 3}–S{sub 5} and O{sub 3}–S{sub 1} are the most thermodynamically stable. While water oxidation process on the former requires an overpotential of 1.22 V, only 0.84 V is needed on the latter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic structures of FeTiO{sub 3}-Fe{sub 2}O{sub 3} solid solution thin films studied by soft X-ray magnetic circular dichroism and ab initio multiplet calculations

The solid solutions between ilmenite (FeTiO{sub 3}) and hematite (α-Fe{sub 2}O{sub 3}) have recently attracted considerable attention as a spintronic material due to their interesting magnetic and electrical properties. In this study, the electronic and magnetic structures of epitaxially grown 0.6FeTiO{sub 3}·0.4Fe{sub 2}O{sub 3} solid solution thin films were investigated by combining x-ray absorption near-edge structure (XANES), x-ray magnetic circular dichroism (XMCD) for two different crystallographic projections, and first-principles theoretical calculations. The Fe L-edge XANES and XMCD spectra reveal that Fe is in the mixed-valent Fe{sup 2+}–Fe{sup 3+} states while Fe{sup 2+} ions are mainly responsible for the magnetization. Moreover, the experimental Fe L-edge XANES and XMCD spectra change depending on the incident x-ray directions, and the theoretical spectra explain such spectral features. We also find a large orbital magnetic moment, which can originate the magnetic anisotropy of this system. On the other hand, although the valence state of Ti was interpreted to be 4+ from the Ti L-edge XANES, XMCD signals indicate that some electrons are present in the Ti-3d orbital, which are coupled antiparallel to the magnetic moment of Fe{sup 2+} ions.

36 MATERIALS SCIENCE↗

An ultra-high vacuum electrochemical flow cell for in situ/operando soft X-ray spectroscopy study

An in situ flow electrochemical cell has been designed and fabricated to allow better seal under UHV chamber thus to achieve a good signal to noise ratio in fluorescence yield detection of X-ray absorption spectra for spectroelectrochemical study. The cell also stabilizes the thin silicon nitride membrane window in an effective manner so that the liquid cell remains intact during X-ray absorption experiments. With the improved design of the liquid cell, electrochemical experiments such as cyclic voltammetry have been performed for 10 cycles with a good stability of sample window. Also an operando electrochemical experiment during photoelectrochemistry has been performed on n-type hematite electrode deposited on silicon nitride window. The experiment allows us to observe the formation of two extra electronic transitions before pre edge of O K-edge spectra.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Synthesis and characterization of black, red and yellow nanoparticles pigments from the iron sand

The aim of this research is to synthesize nanoparticles of black pigment of Magnetite (Fe{sub 3}O{sub 4}), red pigment of hematite (α-Fe{sub 2}O{sub 3}), and yellow pigment of ghoetite (α-FeOOH) from the iron sand. The black pigment of Fe{sub 3}O{sub 4} and the yellow pigment α-FeOOH nanoparticles were synthesized by coprecipitation method with variation of pH. Whereas, the red pigment Fe{sub 2}O{sub 3} was synthesized by sintering Fe{sub 3}O{sub 4} nanoparticles at temperature between 400 °C and 700 7°C for 1 hour. All the pigments has been characterized using X-ray diffraction and SEM. The XRD results shown that the particle size of the black pigmen Fe{sub 3}O{sub 4}, red pigment Fe{sub 3}O{sub 4} and yellow pigment α-FeOOH are around 12, 32, and 30 nm respectively. The particle size of Fe{sub 2}O{sub 3} nanoparticles increase by increasing sintering temperature from 32 nm at 400 °C to 39 nm at 700 °C. For yellow pigment of α-FeOOH, the particle size increase by increasing pH from 30,54 nm at pH 4 to 48,60 nm at pH 7. The SEM results shown that the morphologies of black, yellow and red pigments are aglomarated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface effects and phase stability in metal oxides nanoparticles under visible irradiation

The light induced phase transformation between stable phases of metal oxides nanoparticles is analyzed. The surrounding atmosphere as well as the defect density at the surface play a fundamental role. It has been found that in oxygen poor chamber atmosphere the phase transformation is favored, while the phase transition cannot be achieved if the defects at the surface are properly passivated. The phase transition is activated by intragap irradiation, able to activate the F- center at the surface connected to oxygen vacancies, and promoting the activation of the surface and the nucleation of neighboring crystallites. The phase transition was studied in Titanium oxide (TiO{sub 2}) and in Iron oxide (Fe{sub 2}O{sub 3}): Maghemite is subjected to a phase transformation to α−Fe{sub 2}O{sub 3} (hematite), Anatase nanoparticles converts to Rutile. The general mechanism of the phase transition and, more in general, the possibility to optically control the surface activity of metal oxides is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of in-plane oriented barium hexaferrite thin films prepared by direct current magnetron sputtering

In-plane c-axis oriented Ba-hexaferrite (BaM) thin films were prepared on a-plane (112{sup ¯}0) sapphire (Al{sub 2}O{sub 3}) substrates by DC magnetron sputtering followed by ex-situ annealing. The DC magnetron sputtering was demonstrated to have obvious advantages over the traditionally used RF magnetron sputtering in sputtering rate and operation simplicity. The sputtering power had a remarkable influence on the Ba/Fe ratio, the hematite secondary phase, and the grain morphology of the as-prepared BaM films. Under 80 W of sputtering power, in-plane c-axis highly oriented BaM films were obtained. These films had strong magnetic anisotropy with high hysteresis loop squareness (M{sub r}/M{sub s} of 0.96) along the in-plane easy axis and low M{sub r}/M{sub s} of 0.03 along the in-plane hard axis. X-ray diffraction patterns and pole figures revealed that the oriented BaM films grew via an epitaxy-like growth process with the crystallographic relationship BaM (101{sup ¯}0)//α-Fe{sub 2}O{sub 3}(112{sup ¯}0)//Al{sub 2}O{sub 3}(112{sup ¯}0)

36 MATERIALS SCIENCE↗

Effect of structural phase transformation in FeGaO{sub 3} on its magnetic and ferroelectric properties

We investigate the structural phase transformation from orthorhombic to rhombohedral structure in FeGaO{sub 3} by adopting a combined effect of mechanical alloying/milling and solid state sintering techniques. The structural phase formation of the FeGaO{sub 3} compound has been characterized by X-ray diffraction pattern. Mechanical milling played a significant role on the stabilization of rhombohedral phase in FeGaO{sub 3}, where as high temperature sintering stabilized the system in orthorhombic phase. A considerable difference has been observed in magnetic and ferroelectric properties of the system in two phases. The system in rhombohedral (R-3c) phase exhibited better ferromagnetic and of ferroelectric properties at room temperature in comparison to orthorhombic (Pc2{sub 1}n) phase. The rhombohedral phase appears to be good for developing metal doped hematite system for spintronics applications and in that process mechanical milling played an important role.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic field cycling effect on the non-linear current-voltage characteristics and magnetic field induced negative differential resistance in α-Fe{sub 1.64}Ga{sub 0.36}O{sub 3} oxide

We have studied current-voltage (I-V) characteristics of α-Fe{sub 1.64}Ga{sub 0.36}O{sub 3}, a typical canted ferromagnetic semiconductor. The sample showed a transformation of the I-V curves from linear to non-linear character with the increase of bias voltage. The I-V curves showed irreversible features with hysteresis loop and bi-stable electronic states for up and down modes of voltage sweep. We report positive magnetoresistance and magnetic field induced negative differential resistance as the first time observed phenomena in metal doped hematite system. The magnitudes of critical voltage at which I-V curve showed peak and corresponding peak current are affected by magnetic field cycling. The shift of the peak voltage with magnetic field showed a step-wise jump between two discrete voltage levels with least gap (ΔV{sub P}) 0.345(± 0.001) V. The magnetic spin dependent electronic charge transport in this new class of magnetic semiconductor opens a wide scope for tuning large electroresistance (∼500-700%), magnetoresistance (70-135 %) and charge-spin dependent conductivity under suitable control of electric and magnetic fields. The electric and magnetic field controlled charge-spin transport is interesting for applications of the magnetic materials in spintronics, e.g., magnetic sensor, memory devices and digital switching.

36 MATERIALS SCIENCE↗

Structural analysis of emerging ferrite: Doped nickel zinc ferrite

Ni{sub 0.6-x}Zn{sub 0.4}Co{sub x}Fe{sub 2}O{sub 4} (x = 0, 0.033, 0.264) nanoparticles were synthesized by sol-gel method and annealed at 900°C. Structural properties of all prepared samples were examined with X-ray diffraction (XRD). The partial formation of hematite (α-Fe{sub 2}O{sub 3}) secondary phase with spinel phase cubic structure of undoped and cobalt doped nickel zinc ferrite was found by XRD peaks. The variation in crystallite size and other structural parameters with cobalt doping has been calculated for most prominent peak (113) of XRD and has been explained on the basis of cations ionic radii difference.

36 MATERIALS SCIENCE↗

Characterizations of maghemite thin films prepared by a sol-gel method

Iron is one of the abundant elements of Mother Nature and its compound, iron oxide is an interesting material to study since its discovery in the form of magnetite. It can exist in many phases such as hematite and maghemite, this unique nature has put it as a potential candidate in various applications. The aim of this work is to study the influence of different precursor concentrations on the microstructural and magnetic properties of iron oxide thin film. All samples were prepared via the sol-gel method followed by a spin coating technique on quartz substrates. Iron oxide films were confirmed as maghemite phase from X-ray diffraction patterns. The film morphology was examined by a field emission scanning electron microscope and it showed non-systematic value of average grain size and film thickness throughout the study. Hysteresis loop further confirmed that maghemite is a magnetic material when it was characterized by a vibrating sample magnetometer. The coercivity did not show any correlation with molarity. Nevertheless, it increased as the precursor concentration of the film increased due to the domain behaviour. In conclusion, maghemite thin films were successfully synthesized by the sol-gel method with different precursor concentrations in this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗