Results for “intersection” — Page 31

NASA NTRSDate not supplied

A Strategic Approach for Dense, Integrated, Vehicle Navigation

Drone usage has been on the rise in recent years with applications that include parcel delivery, wildlife protection, precision farming, law enforcement, and industrial inspection, just to name a few. Once regulations and safety policies are put in place to allow for the widespread use of unmanned drones, the number of aircraft in the National Airspace System (NAS) is expected to skyrocket to millions, potentially congesting the airspace which increases the likelihood of separation violations and possibly incidents. Currently, flight infrastructure can only support a few thousand aircraft flying over the United States National Airspace System (NAS) at any given time. A delay at one airport can send ripple effects throughout the system, causing more delays and missed connections. In air traffic control, separation is the concept of keeping an “ownship” aircraft outside a minimum distance from “intruder” aircraft to reduce the risk of the aircraft colliding, as well as preventing accidents due to secondary factors, such as wake turbulence. Maintaining proper separation is often a safety critical property for fixed-wing drones in the airspace. This paper addresses drone separation in time and distance for high volume corridors (en route) and lanes (on ground), merging as well as crossing intersections of multiple corridors/lanes. In this paper, the term drone is applied to both Unmanned Aerial Vehicle (UAV) and small Unmanned Aircraft System (UAS) vehicles operating autonomously. There exists a gamut of approaches to the merging and crossing problems. At one end of the extreme are the conservative yet low cost and verifiable solutions of today that deal with two drones at a time. At the other end are complex Machine Learning-based solutions with high computing requirements for fully autonomous drones of the future that are expected to handle all contentions. This paper presents a feasible and verifiable strategic approach to these problems that is based on distributed cooperation between the drones and the infrastructure. Three phases of the strategic approach (Prepare, Adjust, Commit) are presented. Simulation results are presented that show the proposed approach is stable and resilient to induced perturbations and guarantees a set of fixed-wing drones to merge and cross intersections by adjusting their speed based on their distance to the aircraft in front of them while remaining in the equilibrium state. The equilibrium state is defined as the state when a set of n aircraft move at a relatively constant speed and uniform spacing from each other in a congested system. A congested system is defined as the state when at least one aircraft cannot move at its maximum allowed speed. Unlike existing centralized and pre-planned approaches, the proposed solution is fully distributed and enables autonomous aircraft to decide to adjust their speed and distance with respect to the preceding aircraft, dynamically. Simulation results are presented that assess the feasibility of the approach.

Distributed↗

NASA NTRSDate not supplied

A Strategic Approach for Dense, Integrated, Vehicle Navigation

Drone usage has been on the rise in recent years with applications that include parcel delivery, wildlife protection, precision farming, law enforcement, and industrial inspection, just to name a few. Once regulations and safety policies are put in place to allow for the widespread use of unmanned drones, the number of aircraft in the National Airspace System (NAS) is expected to skyrocket to millions, potentially congesting the airspace which increases the likelihood of separation violations and possibly incidents. Currently, flight infrastructure can only support a few thousand aircraft flying over the United States National Airspace System (NAS) at any given time. A delay at one airport can send ripple effects throughout the system, causing more delays and missed connections. In air traffic control, separation is the concept of keeping an “ownship” aircraft outside a minimum distance from “intruder” aircraft to reduce the risk of the aircraft colliding, as well as preventing accidents due to secondary factors, such as wake turbulence. Maintaining proper separation is often a safety critical property for fixed-wing drones in the airspace. This paper addresses drone separation in time and distance for high volume corridors (en route) and lanes (on ground), merging as well as crossing intersections of multiple corridors/lanes. In this paper, the term drone is applied to both Unmanned Aerial Vehicle (UAV) and small Unmanned Aircraft System (UAS) vehicles operating autonomously. There exists a gamut of approaches to the merging and crossing problems. At one end of the extreme are the conservative yet low cost and verifiable solutions of today that deal with two drones at a time. At the other end are complex Machine Learning-based solutions with high computing requirements for fully autonomous drones of the future that are expected to handle all contentions. This paper presents a feasible and verifiable strategic approach to these problems that is based on distributed cooperation between the drones and the infrastructure. Three phases of the strategic approach (Prepare, Adjust, Commit) are presented. Simulation results are presented that show the proposed approach is stable and resilient to induced perturbations and guarantees a set of fixed-wing drones to merge and cross intersections by adjusting their speed based on their distance to the aircraft in front of them while remaining in the equilibrium state. The equilibrium state is defined as the state when a set of n aircraft move at a relatively constant speed and uniform spacing from each other in a congested system. A congested system is defined as the state when at least one aircraft cannot move at its maximum allowed speed. Unlike existing centralized and pre-planned approaches, the proposed solution is fully distributed and enables autonomous aircraft to decide to adjust their speed and distance with respect to the preceding aircraft, dynamically. Simulation results are presented that assess the feasibility of the approach.

Distributed↗

NASA NTRSDate not supplied

ETM Industry: Tabletop Defining Notions for Cooperative Operating Practices

This tabletop plans to cover 3 main topics in regards to the research that NASA has conducted for High-E Traffic Management (ETM), as well as implementing it to stand up an ETM system in the Airspace Operations Lab to invite industry participants to join us in a collaborative evaluation at the end of 2023. (Or earlier for system architectural connectivity). Working to define the notions that go into Cooperative Operating Practices for a collaborative traffic management process, we will be showing and training to some of our early prototype concepts and discussing: 1. Operational Intent: We have built an OI generation tool and would like to discuss specifics to the requirements of OI size, update rates, and duration. 2. Strategic Conflict Detection: We have built a concept to detect overlapping OI’s and would like to discuss the output information; time horizon, geometry and confidence level of intersection. In addition we are looking at a service that would provide all users with additional information in regards to the probability of your actual flight intent getting within a specified separation envelope. 3. Cooperative Operating Practices (COPS): Specifically looking at COPs for strategic deconfliction, we are looking to industry to build the actual COPS based on various criteria; vehicle-to-vehicle interactions, or company to company agreements. What is the strategy when OIs intersect; wait and see, take a pre-negotiated COPS action, or ad-hoc negotiation and discuss what that looks like.

High-E Traffic Management (ETM)↗

NASA NTRSDate not supplied

Transcriptomics-based Machine Learning Analysis Predicts Space-Exposed Murine Livers

Limited sample sizes, high data dimensionality, and sensitivity to technical and biological variability of next generation sequencing (NGS), typically limits machine learning (ML) approaches in spaceflight studies that include radiation effects. However, pooling smaller studies while addressing intra- and inter-study variabilities allows for ML predictive modeling. Here, integration methods were applied to whole transcriptome shotgun sequencing (RNA-seq) data from six mouse liver GeneLab datasets (GLDS) (n ranging from 6 to 39 samples) from with a total of 81 spaceflight and ground-control samples to determine top features (i.e. genes) relevant to spaceflight including the effect of radiation exposure. RNASeq counts were normalized for each study, then merged and scaled across all datasets. Data dimensionality was reduced using a minimum redundancy maximum relevance (MRMR) methodology. Redundancy and relevance were computed using the Pearson correlation and F-statistic, respectively. The top 100 MRMR features were used to predict spaceflight vs. ground-control samples using Random Forest (RF), Support Vector Machine (SVM), and Linear Discriminant Analysis (LDA) classifiers with 5-fold cross validation (CV). Principal component analysis (PCA) on the complete feature set versus the MRMR features shows separation between spaceflight samples and ground controls (Figure 1A). The ML-based gene sets were compared against differential gene expression results obtained with DESeq2 from individual GLDS. Using all features or randomly sampled subsets at matching set sizes with MRMR, a maximum classifier accuracy of 69% was shown on the test set over 5 folds. For all classifiers, CV training using at least the top 30 MRMR genes show minimum 89% accuracy and 0.95 AUC value on the test set over 5 folds (Figure 1B). Baseline set analysis on differentially expressed genes (DEGs) identified using padj ≤ 0.05 show 295 DEGs that overlap at least two studies and 13 DEGs that overlap three studies (Figure 1C). Set analysis between the top 100 MRMR features and the DEGs showed 47 genes that overlap at least one study and 24 genes that overlap two studies. Over-representation analysis showed overlapping biological processes related to fatty acid and lipid metabolism which may indicate these processes in the response to spaceflight stressors. MRMR feature selection for the selected ML methods improve performance relative to a classifier built on all features or randomly sampled subsets. Permutation feature importance within the decorrelated MRMR features showed concordance in feature ranking between ML methods. A challenge of applying ML methods across heterogeneous NGS data is accounting for signal:noise. Here, signal validation across studies was shown by intersecting sets between top MRMR genes and DEGs from DESeq2 analysis. Non-intersecting sets introduce opportunity to explore genes relevant to differentiating space flight exposed groups and implementing ML methods across existing NGS datasets may overcome sample size limitations.

Machine Learning↗

NASA NTRSDate not supplied

Aerial Vehicle Routing and Scheduling for UAS Traffic Management: A Monte Carlo Tree Search Approach

Numerous unmanned aircraft systems operating at low altitudes to deliver goods and services may one day become ubiquitous in our cities. In the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) framework, such a concept is envisioned, where aerial vehicles operate beyond visual line of sight (BVLOS) within specifically reserved and time stamped “corridors” in the airspace. For example, these corridors or operational intent volumes can connect an aerial vehicle’s origin site to its destination site for package delivery operations. There may also be more than one corridor available for an aerial vehicle to choose from and often different corridors may intersect with one another. Thus, it is imperative to ensure flight trajectories belonging to different aerial vehicles are not in conflict. Per the UTM CONOPs, we assume that a vehicle almost always stays inside its corridor or operational volume. This work provides a framework for strategic deconfliction of UTM or package delivery drones, where we schedule the departure time of all vehicles subject to various temporal constraints (including the corridor deconfliction at the intersections). We present the “multi-route weighted package delivery problem” which serves as an exemplifying model for strategic deconfliction in UTM. In the multi-route weighted package delivery problem, a graph network is given which consists of a set of depots (source) and drop-off (destination) nodes, with multiple routes (defined as a sequence of waypoints) connecting the depots to drop-off nodes. In addition, routes are weighted by the associated ground risk and total travel distance for package delivery. The goal is for a known set of aerial vehicles to depart from the depots, choose a route and take off time, while avoiding conflicts with other aerial vehicles, and minimizing both risk and distance traveled. We provide a mixed integer linear programming (MILP) formulation of the problem, as well as a heuristic solution based on Monte Carlo Tree Search (MCTS) – a method used in game theory and artificial intelligence – to overcome limitations inherent to optimal solvers. Computational results show the advantages of using MCTS over the MILP formulation; the former can provide a sub-optimal solution quickly, and may sometimes even reach an optimal solution, whereas the latter may not even produce a solution in reasonable time. Furthermore, results from both the MILP formulation and MCTS methods were validated using a preliminary agent-based simulator implementing the UTM concept of operations. Thus, the MCTS method can be seen as a scalable solution to the complex multi-route weighted package delivery problem and may possibly be extended to similar complex optimization problems.

Kenny Chour↗

NASA NTRS2020

Shape Estimation for Elongated Deformable Object using B-spline Chained Multiple Random Matrices Model

In this paper, a B-spline chained multiple random matrix models (RMMs) representation is proposed to model geometric characteristics of an elongated deformable object. The hyper degrees of freedom structure of the elongated deformable object make its shape estimation challenging. Based on the likelihood function of the proposed B-spline chained multiple RMMs, an expectation-maximization (EM) method is derived to estimate the shape of the elongated deformable object. A split and merge method based on the Euclidean minimum spanning tree (EMST) is proposed to provide initialization for the EM algorithm. The proposed algorithm is evaluated for the shape estimation of the elongated deformable objects in scenarios, such as the static rope with various configurations (including configurations with intersection), the continuous manipulation of a rope and a plastic tube, and the assembly of two plastic tubes. The execution time is computed and the accuracy of the shape estimation results is evaluated based on the comparisons between the estimated width values and its ground-truth, and the intersection over union (IoU) metric.

Gang Yao↗

NASA NTRSDate not supplied

Separation Assurance in Urban Air Mobility Systems Using Shared Scheduling Protocols

Ensuring safe separation between aircraft is a critical challenge in air traffic management, particularly in urban air mobility (UAM) environments where high traffic density and low altitudes require precise control. In these environments, conflicts often arise at the intersections of flight corridors, posing significant risks. We propose a tactical separation approach leveraging shared scheduling protocols, originally designed for Ethernet networks and operating systems, to coordinate access to these intersections. Using a decentralized Markov decision process framework, the proposed approach enables aircraft to autonomously adjust their speed and timing as they navigate these critical areas, maintaining safe separation without a central controller. We evaluate the effectiveness of this approach in simulated UAM scenarios, demonstrating its ability to reduce separation violations to zero while acknowledging trade-offs in flight times as traffic density increases. Additionally, we explore the impact of non-compliant aircraft, showing that while shared scheduling protocols can no longer guarantee safe separation, they still provide significant improvements over systems without scheduling protocols.

Separation Assurance↗

NASA NTRSDate not supplied

Separation Assurance in Urban Air Mobility Systems Using Shared Scheduling Protocols

Ensuring safe separation between aircraft is a critical challenge in air traffic management, particularly in urban air mobility (UAM) environments where high traffic density and low altitudes require precise control. In these environments, conflicts often arise at the intersections of flight corridors, posing significant risks. We propose a tactical separation approach leveraging shared scheduling protocols, originally designed for Ethernet networks and operating systems, to coordinate access to these intersections. Using a decentralized Markov decision process framework, the proposed approach enables aircraft to autonomously adjust their speed and timing as they navigate these critical areas, maintaining safe separation without a central controller. We evaluate the effectiveness of this approach in simulated UAM scenarios, demonstrating its ability to reduce separation violations to zero while acknowledging trade-offs in flight times as traffic density increases. Additionally, we explore the impact of non-compliant aircraft, showing that while shared scheduling protocols can no longer guarantee safe separation, they still provide significant improvements over systems without scheduling protocols.

system safety↗

NASA NTRSDate not supplied

Incorporation of Human Risk Directed Acyclic Graphs (DAG) With Mishap Investigations to Un-Silo Knowledge

NASA’s Human System Risk Board (HSRB) has been a central driver in efforts to understand, mitigate, and communicate the 29 human systems risks monitored by the board. As a result of the collaboration between research, operations, and technical authorities, large bodies of knowledge have been collected and digested to represent the current understanding of the risks. As a part of these bodies of knowledge, directed acyclic graphs (DAGs) have been developed to communicate the current understanding of the causal relationship of the hazards, contributing factors, countermeasures, other risks, and outcomes that contribute to the overall risk. This risk knowledge is applied in a theoretical sense for potential incidents during exploration even while informed by surveillance data. However, there have been mishaps and close calls during past space exploration that intersect with one or more of the Human System Risks DAGs and knowledge bases. The purpose of this exercise was to un-silo this risk knowledge and connect it to the close call of EVA 23 through the development of a DAG representing the intersection of the HSRB Risks and the events of the close call. The development of the DAG occurred through an iterative process, with each iteration expanding and/or refining the nodes and connections described by the source materials. In addition to the risk documentation developed by the HSRB, lessons learned and other mishap investigation documents were utilized to understand the events that led to water entering the helmet of a crewmember on the EVA. New nodes specific to the events of EVA 23 were interconnected with existing HSRB DAG nodes and edges. Nodes within the DAG were defined within a “DAG-tionary” with any updates to a definition that may have previously existed from the HSRB DAGs, and edges were recorded in a matrix. Both the DAG-tionary and matrix describe where nodes and edges are present across the Risk and Mishap DAG. This DAG will then be reviewed by experts outside of HSRB and HRP to confirm that interpretations of the non-health related events (such as the engineering nodes) are represented accurately. DISCUSSION This process highlighted a method by which the knowledge generated among the contributing members of the HSRB Risks can be effectively adapted and utilized through the tools employed by the Risk Custodian teams. By leveraging these tools, new context and insights to the information at hand can be brought forward to address current spaceflight challenges. Moreover, un-siloing this knowledge through future DAGs and other efforts can drive interprofessional collaboration and foster communication. This will enable teams to work together more effectively, leveraging their diverse expertise to tackle the complex challenges of space exploration and human research. Ultimately, this collaboration will bring NASA closer to achieve agency goals and contribute to the overall shared mission and vision.

Samuel Jacobs↗

DOE OSTI2020

Results of Multiple Tracer Injections into Fractures in the EGS Collab Testbed-1

The EGS Collab project constructed an intermediate scale (~10-20 m) testbed at the 4850 level of the Stanford Underground Research Facility (SURF) in South Dakota for testing and validating fracture stimulation and flow/transport models. This testbed consists of eight ~200 ft (~60 m) HQ-diameter (9.6 cm) boreholes that are drilled into the crystalline rocks of the Poorman Formation from the West Access Drift tunnel. Of the eight boreholes, one borehole is used as an injection/stimulation well, while another sub-parallel borehole located about 10 m away from the injection well is used as a production well, and rest of the other boreholes are used as geophysical/fluid sampling monitoring wells. Hydraulic stimulation activities were conducted at three locations along the injection hole in an attempt to create direct fracture connections to the production hole. A flow system has been established between injection and production boreholes through a set of hydraulically stimulated fractures propagated from a notch located at 164 ft in the injection hole. Although we planned for a single production well, a set of natural fractures in the testbed is believed to have intersected the stimulated hydraulic fractures and provided additional flow paths for water to be transported to the drift through multiple monitoring boreholes and weep zones. As the flow tests continued after stimulation activities, single or a combination of two or three producers become dominant producers at different times, mostly as a response to intersection of hydraulic fracture and testbed wells, activation of natural fractures and making new leak points to the monitoring wells, resealing of leaky wells, and so on. Since late October 2018, multiple tracers were injected into the fracture system at the 164 ft location that involves both stimulated and natural fractures, and tracers were recovered from multiple locations in nearby wells and weep. The cumulative water recoveries over the time have ranged from 50 to 90%; however, the injected tracer recoveries from various production sources are much less (ranging from a few percentages to 38%). Changes in water/tracer recoveries, shifting of major producing wells from one well to the others, and other observations (e.g., microseismic, electric resistivity tomography, etc.) indicate a testbed that has undergone several changes since October 2018. In this paper, we present tracer recovery data accumulated during several tracer campaigns, provide conceptual testbed flow pathways, and provide observations that suggest a evolutionary nature of fracture volume and fracture geometry in the testbed.

15 GEOTHERMAL ENERGY↗

DOE OSTI2021

Subsurface Characterization and Machine Learning Predictions at Brady Hot Springs: Preprint

Subsurface data analysis, reservoir modeling, and machine learning (ML) techniques have been applied to the Brady Hot Springs (BHS) geothermal field in Nevada, USA to further characterize the subsurface and assist with optimizing reservoir management. Hundreds of reservoir simulations have been conducted in TETRAD-G and CMG STARS to explore different injection and production fluid flow rates and allocations and to develop a training data set for ML. This process included simulating the historical injection and production since 1979 and prediction of future performance through 2040. ML networks were created and trained using TensorFlow based on multilayer perceptron (MLP), long short-term memory (LSTM), and convolutional neural network (CNN) architectures. These networks took as input selected flow rates, injection temperatures, and historical field operation data and produced estimates of future production temperatures. This approach was first successfully tested on a simplified single fracture doublet system, followed by the application to the BHS reservoir. Using an initial BHS dataset with 37 simulated scenarios, the trained and validated network predicted the production temperature for 6 production wells with the mean absolute percentage error of less than 8%. In a complementary analysis effort, the principal component analysis applied to 13 BHS geological parameters revealed that vertical fracture permeability shows the strongest correlation with fault density and fault intersection density. A new BHS reservoir model was developed considering the fault intersection density as proxy for permeability. This new reservoir model helps to explore under-exploited zones in the reservoir. A data gathering plan to obtain additional subsurface data was developed; it includes temperature surveying for three idle injection wells, at which the reservoir simulations indicate high bottom-hole temperatures. The collected data assist with calibrating the reservoir model and may lead to converting these wells to producers to access under-exploited zones in the reservoir. Data gathering activities are planned for the first quarter of 2021.

40 EE - Geothermal Technologies Office (EE-4G)↗

DOE OSTI2020

Integrating Overhead Camera Imagery with Reinforcement Learning to Improve Fuel Economy Through Adaptive Traffic Control

Overhead cameras have been deployed for some time as a sensor for traffic control, with many advantages over conventional inductive loop sensors in terms of robustness, ease of installation, and simplicity with respect to maintenance. We explore the utility of such imagery (in particular, fisheye lens cameras) for intelligent traffic control in real-time using reinforcement learning, with a goal of improving fuel economy for the overall intersection and grid of intersections. We summarize our initial work in data collection and approach to ascertain the ability to visually sense vehicular fuel consumption using real-world data. We then describe our deep reinforcement learning topology to test adaptive control informed by the camera capabilities. Next, we tested the proof-of-concept through a variety of simulation scenarios using the Simulation of Urban Mobility (SUMO) traffic simulator, which included different estimates on vehicle classifications, different traffic distributions, and different traffic densities. Six different control policies were tested ranging from simple timing, to heuristic visual-based methods, to actual policies learned via the reinforcement learning approach. Our results demonstrate the feasibility of the approach for controlling traffic lights for better fuel efficiency based on visual vehicle estimates from commercial, fisheye lens cameras.

Karnowski, Thomas↗

DOE OSTI2023

GCR: Class B Code Case

This PowerPoint presentation is for Joint ART Materials/AMMT Program Review, Germantown, MD, on June-5-8, 2023. It will discuss development to revamp the ASME Section III Division 5 Class B design rules. There will be a plan in the FY24 to assess extrapolation methods for other Class A materials, alternative strain range evaluations for fatigue damage, evaluation of Class B intersection point in D-diagram relative to material-specific Class A intersection points, and evaluation of new Class B rules against Class A rules based on Elastic-Perfectly Plastic (EPP) methodology and full inelastic analysis method, using sample problems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Microscale device and method for purification of radiopharmaceuticals

A microfluidic chip device for the purification of radiochemical compounds includes a chip having an injection channel and intersecting branch channels with a plurality of valves are located along the injection channel and branch channels and configured to retain a plug of solution containing the radiochemical compound. The chip further includes a serpentine channel segment (for separation) coupled to the output of the injection channel. A high voltage power source advances the plug of solution through the purification region and into the downstream fraction collection channel. The chip includes a downstream fraction collection channel coupled to the serpentine channel segment and having an optical and radiation detection regions. One or more branch fraction channels intersect with the fraction collection channel and include valves located therein so that the radiochemical compound that is detected using a radiation detector is directed into the desired branch fraction channel for subsequent use.

Van Dam, R. Michael↗

DOE OSTI2023

Towards a Software Development Framework for Interconnected Science Ecosystems

The innovative science of the future must be multi-domain and interconnected to usher in the next generation of “self-driving” laboratories enabling consequential discoveries and transformative inventions. Such a disparate and interconnected ecosystem of scientific instruments will need to evolve using a system-of-systems (SoS) approach. The key to enabling application integration with such an SoS will be the use of Software Development Kits (SDKs). Currently, SDKs facilitate scientific research breakthroughs via algorithmic automation, databases and storage, optimization and structure, pervasive environmental monitoring, among others. However, existing SDKs lack instrument-interoperability and reusability capabilities, do not effectively work in an open federated architectural environment, and are largely isolated within silos of the respective scientific disciplines. Inspired by the scalable SoS framework, this work proposes the development of INTERSECT-SDK to provide a coherent environment for multi-domain scientific applications to benefit from the open federated architecture in an interconnected ecosystem of instruments. This approach will decompose functionality into loosely coupled software services for interoperability among several solutions that do not scale beyond a single domain and/or application. Furthermore, the proposed environment will allow operational and managerial inter-dependence while providing opportunities for the researchers to reuse software components from other domains and build universal solution libraries. We demonstrate this research for microscopy use-case, where we show how INTERSECT-SDK is developing the tools necessary to enable advanced scanning methods and accelerate scientific discovery.

Malviya, Addi Thakur↗

DOE OSTI2023

Finding a contaminant source in a volume of flowing fluid

A method includes: mapping a boundary of a volume of flowing fluid; partitioning the volume by a computational mesh; finding a contaminant location at a first sensor that is disposed within the volume; obtaining a measured velocity of the flowing fluid within the volume; generating a reversed velocity vector field within the mesh, in response to the measured velocity; time stepping the contaminant location from the first sensor along the reversed velocity vector field until the contaminant location intersects the boundary of the volume; and finding a contaminant source at the intersection of the time stepped contaminant location with the boundary of the volume.

Lopez-Marrero, Vanessa↗

DOE OSTI2023

Hollow lattice thermal energy storage heat exchanger

Example heat exchangers and methods of use are described herein. An example heat exchanger includes a lattice structure including a plurality of conduits defining a plurality of interstitial voids between the plurality of conduits. Each of the plurality of conduits includes an inlet and an outlet, and the plurality of conduits are arranged such that, between the inlet and the outlet, each of the conduits intersects at least one other conduit to enable flow between the intersecting conduits. The example heat exchanger also includes a first manifold formed unitarily with the lattice structure, the first manifold comprising a first plurality of openings in fluid communication with each inlet of the plurality of conduits. The example heat exchanger further includes a phase change material (PCM) disposed within and substantially filling the plurality of interstitial voids.

Stoia, Michael F.↗

DOE OSTI2020

Determining Compression Characteristics of Honeycomb Material - 19674

The objective is to determine compression test characteristics of stainless steel honeycomb material to be able to represent honeycomb structures accurately in analytical models used to simulate hypothetical accident scenarios of shipping packages. Honeycomb is a material used primary in the aerospace industry due to its high strength-to-weight ratio. Because it doesn't have a shelf life and can withstand high heats, it is an excellent candidate for a structural material in package designs. Honeycomb has orthotropic material properties. The honeycomb currently being evaluated is made of metal ribbons spot welded together to form hexagon pattern between metal plates. The hexagon ribbons are brazed to the metal plates. The complexity of the honeycomb significantly lengthens the simulation time, which is further complicated when the brazing, welding, and imperfections of the material is considered. This means to affectively represent the honeycomb in simulation programs, such as Abaqus, the material needs to be approximated as a uniform orthotropic material. This requires material properties in each of the three directions, T, W, and L. The T direction is defined as the 'strong' direction, perpendicular to the honeycomb sheet. The L direction is parallel the ribbon and the W direction is perpendicular to the ribbon. Honeycomb has 3 different compression stages. Stage 1 is the initial compression where the honeycomb maintains its structural integrity and does not permanently deform from loads from normal operations. Stage 2 is when the initial buckling causes irreversible damage to the honeycomb. Stage 2 is the one we are most interested in because it absorbs the most energy from a hypothetical accident scenario. During Stage 2, the honeycomb fails layer-by-layer, indicating that the more layers, the longer material crushing is sustained, and thus the more energy that is absorbed. Stage 3 is final compression, similar to compressing solid metal. During stage 3 the stress increases with a diminishing rate of elongation and the honeycomb is completely failed where the plates between the honeycomb core sandwich the crushed honeycomb ribbon. The stress-strain graph bellow shows compression test of 3 different samples in the T direction. The red lines divide the three stages. The far left is Stage 1, the middle stage 2, and the right stage 3. The data collected is displayed in the table below. The expressions in the table represent the regression formula that represents each stage of the compression on a stress-strain graph. Stage 1 is assumed to intersect with the origin; data for stage 3 for the crush in W and L directions where unable to be gathered due to the nature of failure for those directions. Stage 1 and 2 are linear regressions while stage 3 is a degree 2, to best match the curve. Linear regression is used on stage 2 because ultimately that represents the energy absorbed. With more data, a degree n x 2 regression would be a more appropriate regression for stage 2, where n is the number of layers. The table below is the approximation of each scenario and stage. Each stage starts and ends at the intersection of the next stage. There where two main objectives for these tests: firstly to understand how honeycomb performs under extreme compression, and secondly to be able to numerically represent the honeycomb structure. Both of these where completed to varying degrees. It is important understood how the honeycomb fails. If it is crushed in the T direction it retains its integrity even after being crushed, however when crushed in the L and W crush direction, if it fails, it disintegrates, and loses all integrity. Also, the more layers the more time the material spends in stage 2. Failure is started by buckling, thus if there is any imperfection, the stress will not spike but transition straight into stage 2. The data collected and aggregated can be used for initial simulation of honeycomb used in packages. The initial testing has set the ground work for more data to be collected in order to verify results and to allow more confidence in the simulation results. This is only the initial data collected. The next steps is to continue to collect more data to verify results and to test more variants of honeycomb, with different brazing, layers, and shape.

36 MATERIALS SCIENCE↗