Search NASA⌕ Search

SEARCH · Search NASA

Results for “large structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Efficient reanalysis of structures by a direct modification method

A procedure for the local stiffness modifications of large structures is described. It enables structural modifications without an a priori definition of the changes in the original structure and without loss of efficiency due to multiple loading conditions. The solution procedure, implemented in NASTRAN, involved the decomposed stiffness matrix and the displacement vectors of the original structure. It solves the modified structure exactly, irrespective of the magnitude of the stiffness changes. In order to investigate the efficiency of the present procedure and to test its applicability within a design environment, several real and large structures were solved. The results of the efficiency studies indicate that the break-even point of the procedure varies between 8% and 60% stiffness modifications, depending upon the structure's characteristics and the options employed.

Raibstein, A. I.↗
NASA NTRS1979

Weight optimization of ultra large space structures

The paper describes the optimization of a solar power satellite structure for minimum mass and system cost. The solar power satellite is an ultra large low frequency and lightly damped space structure; derivation of its structural design requirements required accommodation of gravity gradient torques which impose primary loads, life up to 100 years in the rigorous geosynchronous orbit radiation environment, and prevention of continuous wave motion in a solar array blanket suspended from a huge, lightly damped structure subject to periodic excitations. The satellite structural design required a parametric study of structural configurations and consideration of the fabrication and assembly techniques, which resulted in a final structure which met all requirements at a structural mass fraction of 10%.

Reinert, R. P.↗
NASA NTRS1990

Simultaneous expansion and orthogonalization of measured modes for structure identification

Tests of large structures on-orbit will be performed with measurements at a relatively few structure points. Values for the unmeasured degrees of freedom (dofs) can be estimated based on measured dofs and analytical model dynamic information. These 'expanded' mode shapes are useful for optimal-update identification and damage location as well as test/analysis correlation. A new method of expansion for test mode shape vectors is developed from the orthogonal Procrustes problem from computational linear algebra. A subspace defined by the set of measured dofs is compared to a subspace defined by mode shapes from an analytical model of the structure. The method simultaneously expands and orthogonalizes the mode shape vectors. Two demonstration problems are used to compare the new method to current expansion techniques. One demonstration uses test data from a laboratory scale-model truss structure. Performance of the new method is comparable or superior to that of the previous expansion methods which require separate orthogonalization.

Smith, Suzanne Weaver↗
NASA NTRS1981

EVA assembly of large space structure element

The results of a test program to assess the potential of manned extravehicular activity (EVA) assembly of erectable space trusses are described. Seventeen tests were conducted in which six "space-weight" columns were assembled into a regular tetrahedral cell by a team of two "space"-suited test subjects. This cell represents the fundamental "element" of a tetrahedral truss structure. The tests were conducted under simulated zero-gravity conditions. Both manual and simulated remote manipulator system modes were evaluated. Articulation limits of the pressure suit and zero gravity could be accommodated by work stations with foot restraints. The results of this study have confirmed that astronaut EVA assembly of large, erectable space structures is well within man's capabilities.

Bement, L. J.↗
NASA NTRS1979

Low cost fabrication of graphite epoxy column elements for large space structures

A procedure for fabricating graphite epoxy column elements used in the construction of large space platforms is described. Dry fiber is wound on a tapered aluminum mandrel in the LMSC vertical winding machine, and resin is injected between the mandrel and an outer sleeve. The winding and injection take place at elevated temperature to minimize the thermal expansion problems that arise in curing a tube on an aluminum mandrel when the end fittings are integrally wound.

Bluck, R. M.↗
NASA NTRS1992

Large-scale structure of the heliospheric magnetic field - 1976-1991

A uniform set of computed large-scale coronal fields derived from photospheric field observations now exists for the interval 1976 to the present. Using this data base we can begin to compare Solar Cycle 21 with Solar Cycle 22. The character of the field and its evolution are the same, but many of the particulars are different. The polar field was about 25 percent stronger at solar minimum in 1986 than in 1976, consequently the heliospheric current sheet was confined to a narrower latitude range. In the rising phase of Cycle 21 a strong 4-sector pattern developed; the same pattern was not present in Cycle 22. Other differences include the timing of the polar field reversals and changes in latitudinal extent of the current sheet.

Hoeksema, J. T.↗
NASA NTRS1979

State and model error estimation for distributed parameter systems

In-flight estimation of large structure model errors in order to detect inevitable deficiencies in large structure controller/estimator models is discussed. Such an estimation process is particularly applicable in the area of shape control system design required to maintain a prescribed static structural shape and, in addition, suppress dynamic disturbances due to the vehicle vibrational modes. The paper outlines a solution to the problem of static shape estimation where the vehicle shape must be reconstructed from a set of measurements discretely located throughout the structure. The estimation process is based on the principle of least-squares that inherently contains the definition and explicit computation of model error estimates that are optimal in some sense. Consequently, a solution is provided for the problem of estimation of static model errors (e.g., external loads). A generalized formulation applicable to distributed parameters systems is first worked out and then applied to a one-dimensional beam-like structural configuration.

Rodriguez, G.↗
NASA NTRS1991

Could the electroweak scale be linked to the large scale structure of the Universe?

We study a model where the domain walls are generated through a cosmological phase transition involving a scalar field. We assume the existence of a coupling between the scalar field and dark matter and show that the interaction between domain walls and dark matter leads to an energy dependent reflection mechanism. For a simple Yakawa coupling, we find that the vacuum expectation value of the scalar field is theta approx. equals 30GeV - 1TeV, in order for the model to be successful in the formation of large scale 'pancake' structures.

Chakravorty, Alak↗
NASA NTRS1979

EVA Assembly of Large Space Structure Neutral Buoyancy, Zero-Gravity Simulation: NASA-LaRC Nestable Columns and Joints

The film depicts an extravehicular activity (EVA) that involved the assembly of six "space-weight" columns into a regular tetrahedral cell by a team of two "space"-suited test subjects. This cell represents the fundamental "element" of a tetrahedral truss structure. The tests were conducted under simulated zero-gravity conditions, achieved by neutral buoyancy in water. The cell was assembled on an "outrigger" assembly aid off the side of a mockup of the Shuttle Orbiter cargo bay. Both manual and simulated remote manipulator system (RMS) modes were evaluated. The simulated RMS was used only to transfer stowed hardware from the cargo bay to the work sites. Articulation limits of the pressure suit and zero gravity could be accommodated by work stations with foot restraints. The results of this study have confirmed that astronaut EVA assembly of large, erectable space structur is well within man's capabilities.

TESTS↗
NASA NTRS1989

Initial operational capability of the ASTREX large space structures test bed

Future DOD, NASA, and SDI space systems will be larger than any spacecraft flown before. The economics of placing these large space systems (LSS) into orbit dictates that they be as low in mass as possible. The combination of very large size and relatively low mass produces systems which possess little structural rigidity. This flexibility causes severe technical problems when combined with the precise shape and pointing requirements associated with many future LSS missions. Development of new control technologies which can solve these problems and enable future LSS missions is under way, but a test bed is needed for demonstration and evaluation of the emerging control hardware (sensors and actuators) and methodologies. In particular, the need exists for a facility which enables both large angle slewing and subsequent pointing/shape control of a variety of flexible bodies. The Air Force Astronautics Laboratory (AFAL) has conceived the Advanced Space Structures Technology Research Experiments (ASTREX) facility to fill this need. An overview of the ASTREX facility is given.

Norris, G. A.↗
DOE OSTI2023

Energetic robustness to large scale structural fluctuations in a photosynthetic supercomplex

Abstract Photosynthetic organisms transport and convert solar energy with near-unity quantum efficiency using large protein supercomplexes held in flexible membranes. The individual proteins position chlorophylls to tight tolerances considered critical for fast and efficient energy transfer. The variability in protein organization within the supercomplexes, and how efficiency is maintained despite variability, had been unresolved. Here, we report on structural heterogeneity in the 2-MDa cyanobacterial PSI-IsiA photosynthetic supercomplex observed using Cryo-EM, revealing large-scale variances in the positions of IsiA relative to PSI. Single-molecule measurements found efficient IsiA-to-PSI energy transfer across all conformations, along with signatures of transiently decoupled IsiA. Structure based calculations showed that rapid IsiA-to-PSI energy transfer is always maintained, and even increases by three-fold in rare conformations via IsiA-specific chls. We postulate that antennae design mitigates structural fluctuations, providing a mechanism for robust energy transfer in the flexible membrane.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1980

Solution sensitivity and accuracy study of NASTRAN for large dynamic problems involving structural damping

Large dynamic problems involving NASTRAN SOLUTION 8 (i.e., the steady state dynamic response option wherein all response quantities vary as e sub i omega t, where omega is the driving frequency and t is time) are considered. Using a submerged steel plate with a viscoelastic layer layer as the bench mark sample, the solution sensitivity and solution accuracy are checked. The solution sensitivity is examined by running the same finite element model on different computers, different versions of NASTRAN, and different precision levels. The solution accuracy is evaluated for these same runs by comparing the NASTRAN results with the exact solution of the same problem.

Kalinowski, A. J.↗
NASA NTRS2005

Catalytic Metal Free Production of Large Cage Structure Carbon Particles: A Candidate for Hydrogen Storage

We will demonstrate that carbon particles consisting of large cages can be produced without catalytic metal. The carbon particles were produced in CO gas as well as by introduction of 5% methane gas into the CO gas. The gas-produced carbon particles were able to absorb approximately 16.2 wt% of hydrogen. This value is 2.5 times higher than the 6.5 wt% goal for the vehicular hydrogen storage proposed by the Department of Energy in the USA. Therefore, we believe that this carbon particle is an excellent candidate for hydrogen storage for fuel cells.

Kimura, Yuki↗
NASA NTRS1985

Frequency Domain Control Design of Large Space Structures: A Practical Approach

Requirements indicate the need for much larger, more accurate, and in some cases, very dynamic satellites. Large control system bandwidths are needed to meet accuracy and response requirements while maintaining tight control over appendage oscillations. Studies in recent years have shown that linear quadratic Gaussian (LQG) controllers can achieve the desired performance if the system is linearized and if the system model is accurate. Results of an LQG controller applied to a single axis satellite with large solar arrays, are given. A reduced order model (ROM) comprises rigid body motion with dominant structural modes. Optimal control and estimation gains are calculated based on an extremely conservative 0.0005 critical damping ratio. In order to examine stability characteristics, single-input single-output (SISO) frequency response concepts are generalized to develop a method of displaying open loop frequency response of multi-input multi-output (MIMO) control system.

Harding, R.↗
NASA NTRS1989

Grid sensitivity capability for large scale structures

The considerations and the resultant approach used to implement design sensitivity capability for grids into a large scale, general purpose finite element system (MSC/NASTRAN) are presented. The design variables are grid perturbations with a rather general linking capability. Moreover, shape and sizing variables may be linked together. The design is general enough to facilitate geometric modeling techniques for generating design variable linking schemes in an easy and straightforward manner. Test cases have been run and validated by comparison with the overall finite difference method. The linking of a design sensitivity capability for shape variables in MSC/NASTRAN with an optimizer would give designers a powerful, automated tool to carry out practical optimization design of real life, complicated structures.

Nagendra, Gopal K.↗
NASA NTRS1987

Modification of turbulent boundary layer structure by large-eddy breakup devices

The modification of the turbulent boundary layer large-eddy structure by streamlined devices is analyzed using the rapid distortion approximation and unsteady aerodynamic theory. The fluctuating velocity downstream of thin plate and airfoil-shaped devices is calculated throughout the boundary layer for two-dimensional and three-dimensional upstream harmonic disturbances. It is shown that such devices suppress most effectively the fluctuating vertical velocity for a range of reduced frequencies k(1) based on the device chord length. This effect depends on the device geometry and loading, its distance to the wall, and on the upstream disturbance condition. Effective devices suppressing most of the large-scale turbulent energy are such that k(1) varies over the 0.5 to 3.0 range. For airfoil-shaped devices, the device thickness has minimal effect on its performance. On the other hand, lifting devices are more effective than thin plates particularly for two-dimensional disturbances.

Atassi, H. M.↗
NASA NTRS1988

Experimental facilities for system identification

Future space vehicles will differ significantly from the space systems used in the past. The planned spacecraft configurations will include extremely large structures, up to 100-200 meters across. Because the allowable launch weights are limited, the large space structures must be constructed of lightweight, flexible elements, and active control of the shape and attitude of the spacecraft will be required. The behavior of large structures is characterized by many closely spaced natural modes, and some applications may also include large on-board disturbances. Consequently, the control and disturbance forces will invariably spill over to a large number of modes. Structural identification will be necessary for precision pointing and shape controls to be effective. An accurate mathematical model of a structure is essential for the success of precision control system design. However, the currently available analytical modeling codes, such as NASTRAN, are incapable of producing numerical models of the required precision. The favored approach for model determination is to refine the mathematical model based on experiments in the orbital environment. It is to this effect that we must develop techniques to reliably generate the accurate models required for future missions, and the arena in which these methods will be developed and proved is through ground-based system identification experiments and demonstrations. The Air Force Astronautics Laboratory (AFAL) has expanded the on-site ground-test facilities in recent years, and additional sites are planned for the immediate future. We shall review the plans for laboratory growth at AFAL with regard to the type of experiments proposed and the availability of the new facilities.

Das, Alok↗