Search NASA⌕ Search

SEARCH · Search NASA

Results for “map validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Benchmark for evaluation and validation of reactor simulations (BEAVRS)

Advances in parallel computing have made possible the development of high-fidelity tools for the design and analysis of nuclear reactor cores, and such tools require extensive verification and validation. This paper introduces BEAVRS, a new multi-cycle full-core Pressurized Water Reactor (PWR) depletion benchmark based on two operational cycles of a commercial nuclear power plant that provides a detailed description of fuel assemblies, burnable absorbers, in-core fission detectors, core loading patterns, and numerous in-vessel components. This benchmark enables analysts to develop extremely detailed reactor core models that can be used for testing and validation of coupled neutron transport, thermal-hydraulics, and fuel isotopic depletion. The benchmark also provides measured reactor data for Hot Zero Power (HZP) physics tests, boron letdown curves, and three-dimensional in-core flux maps from fifty-eight instrumented assemblies. Initial comparisons between calculations performed with MIT's OpenMC Monte Carlo neutron transport code and measured cycle 1 HZP test data are presented, and these results display an average deviation of approximately 100 pcm for the various critical configurations and control rod worth measurements. Computed HZP radial fission detector flux maps also agree reasonably well with the available measured data. All results indicate that this benchmark will be extremely useful in validation of coupled-physics codes and uncertainty quantification of in-core physics computational predictions. The detailed BEAVRS specification and its associated data package is hosted online at the MIT Computational Reactor Physics Group web site (http://crpg.mit.edu/), where future revisions and refinements to the benchmark specification will be made publicly available. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2012

VMAT QA: Measurement-guided 4D dose reconstruction on a patient

Purpose: To develop and validate a volume-modulated arc therapy (VMAT) quality assurance (QA) tool that takes as input a time-resolved, low-density ({approx}10 mm) cylindrical surface dose map from a commercial helical diode array, and outputs a high density, volumetric, time-resolved dose matrix on an arbitrary patient dataset. This first validation study is limited to a homogeneous 'patient.'Methods: A VMAT treatment is delivered to a diode array phantom (ARCCHECK, Sun Nuclear Corp., Melbourne, FL). 3DVH software (Sun Nuclear) derives the high-density volumetric dose using measurement-guided dose reconstruction (MGDR). MGDR cylindrical phantom results are then used to perturb the three-dimensional (3D) treatment planning dose on the patient dataset, producing a semiempirical volumetric dose grid. Four-dimensional (4D) dose reconstruction on the patient is also possible by morphing individual sub-beam doses instead of the composite. For conventional (3D) dose comparison two methods were developed, using the four plans (Multi-Target, C-shape, Mock Prostate, and Head and Neck), including their structures and objectives, from the AAPM TG-119 report. First, 3DVH and treatment planning system (TPS) cumulative point doses were compared to ion chamber in a cube water-equivalent phantom ('patient'). The shape of the phantom is different from the ARCCHECK and furthermore the targets were placed asymmetrically. Second, coronal and sagittal absolute film dose distributions in the cube were compared with 3DVH and TPS. For time-resolved (4D) comparisons, three tests were performed. First, volumetric dose differences were calculated between the 3D MGDR and cumulative time-resolved patient (4D MGDR) dose at the end of delivery, where they ideally should be identical. Second, time-resolved (10 Hz sampling rate) ion chamber doses were compared to cumulative point dose vs time curves from 4D MGDR. Finally, accelerator output was varied to assess the linearity of the 4D MGDR with global fluence change. Results: Across four TG-119 plans, the average PTV point dose difference in the cube between 3DVH and ion chamber is 0.1 {+-} 1.0%. Average film vs TPS {gamma}-analysis passing rates are 83.0%, 91.1%, and 98.4% for 1%/2 mm, 2%/2 mm, and 3%/3 mm threshold combinations, respectively, while average film vs 3DVH {gamma}-analysis passing rates are 88.6%, 96.1%, and 99.5% for the same respective criteria. 4D MGDR was also sufficiently accurate. First, for 99.5% voxels in each case, the doses from 3D and 4D MGDR at the end of delivery agree within 0.5%local dose-error/1 mm distance. Moreover, all failing voxels are confined to the edge of the cylindrical reconstruction volume. Second, dose vs time curves track between the ion chamber and 4D MGDR within 1%. Finally, 4D MGDR dose changes linearly with the accelerator output: the difference between cumulative ion chamber and MGDR dose changed by no more than 1% (randomly) with the output variation range of 10%. Conclusions: Even for a well-commissioned TPS, comparison metrics show better agreement on average to MGDR than to TPS on the arbitrary-shaped measurable 'patient.' The method requires no more accelerator time than standard QA, while producing more clinically relevant information. Validation in a heterogeneous thoracic phantom is under way, as is the ultimate application of 4D MGDR to virtual motion studies.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1976

A moving-window parameter adaptive control system for the F8-DFBW aircraft

This paper describes the moving-window parameter adaptive control system developed for the NASA F8-DFBW aircraft. The control system employs a parameter identification process that, iteratively, adjusts parameters of a model of the aircraft motions in a batch processing manner so that responses generated from the model fit the outputs of sensors stored in a finite record referred to as the moving window. Tests are made on the validity of the parameter estimates before using the parameters in an on-line design process. The on-line design process is an algebraic mapping of the parameters of the model into primary control system feedback and feedforward gains. The mapping was selected to satisfy specific flying quality characteristics over the range of parameter variations expected. Results are presented from simulation studies on the identification algorithm, tests for parameter validity, and the on-line design process.

Montgomery, R. C.↗
DOE OSTI2026

Integrating very-high-resolution imagery, Sentinel-2 time-series data, and machine learning to map shrub fractional abundance across arid and semi-arid ecosystems in China

Shrub fractional abundance (SFA), the proportion of shrub cover per unit area, serves as a critical indicator of environmental aridity and ecosystem health in arid and semi-arid regions, particularly across the Mongolian steppe. However, large-scale SFA mapping in Mongolian steppe ecosystems remains challenging due to the small crown size of shrubs, their sparse distribution, and spectral overlap with coexisting low vegetation (e.g., grasses and herbs), which hinders accurate detection using coarser-resolution satellite data or traditional field surveys. To address these challenges, we developed a two-step approach that integrates very-high-resolution (VHR) imagery, time-series Sentinel-2 data, and deep learning techniques. First, we generated high-accuracy benchmark maps of individual shrub crowns from 0.5 m VHR imagery by combining manual segmentation with a hybrid deep learning framework (Dino V2 and convolutional neural networks). Second, we used these shrub crown maps as training data to build an XGBoost model for predicting SFA from 20 m Sentinel-2 time-series data, leveraging phenological information to improve estimation. We validated our approach across 70 sites (1km 2 each) in the Inner Mongolia Autonomous Region, which is representative of Mongolian steppe ecosystems. From VHR imagery, we mapped 1.31 million shrub crowns with an accuracy of R 2 = 0.92. Scaling up with Sentinel-2 data yielded regional SFA maps with an R 2 = 0.60. Further SHAP (SHapley Additive exPlanations) analysis on the developed XGBoost model revealed that phenological metrics (particularly observations in early-May, mid-July, and late-September), which distinguish shrub phenology from that of other land cover types (e.g., grasses and bare soil), were the most influential predictors of SFA. Finally, our regional SFA maps uncovered unimodal relationships between shrub distribution and climate variables, peaking at mean annual minimum temperatures near 0 °C and annual precipitation around 200 mm. Collectively, these findings demonstrate how the integration of multi-source remote sensing and machine learning can overcome historical limitations in SFA mapping, enabling accurate, spatially continuous assessments across vast Inner-Mongolian steppe ecosystems. Our framework has the potential to be applied to other steppe ecosystems and dryland ecosystems across the Mongolian steppe and beyond, offering a foundation for improved monitoring and ecological impact assessments in the face of global climate changes.

Arid and semi-arid landscapes↗
DOE OSTI2018

Crystal c-axis mapping of hcp metals by conventional reflected polarized light microscopy: Application to untextured and textured cp-Titanium

Highlights: • A computer-aided methodology based on reflected PLM was developed for c-axis orientation mapping of hcp structures. • The methodology was applied to two alpha cp-Ti bulk samples with different texture characteristics. • Calibration and validation of the methodology were performed by using EBSD. - Abstract: Nowadays the crystallographic characterization of polycrystalline metals and metallic alloys is usually performed by means of the electron backscatter diffraction (EBSD) technique. However, when dealing with coarse structures presenting intrinsic optical anisotropy, polarized light microscopy (PLM) imaging might be an alternative or a complementary time-efficient technique. Accordingly, a new computer-aided methodology has been developed in the present study and successfully applied on the crystal c-axis characterization of a hexagonal close-packed (hcp) structure, alpha commercial pure-Titanium (cp-Ti). In this sense, the correlation between EBSD-based crystallographic parameters and PLM-based parameters under certain light microscope settings has been first established by direct comparison using a representative amount of random orientations. Finally, PLM-based c-axis mapping and subsequent c-axis texture plotting have been performed and validated with EBSD for untextured and textured cp-Ti.

36 MATERIALS SCIENCE↗
NASA NTRS2003

Structure and Variability of Water Vapor in the Upper Troposphere and Lower Stratosphere

An algorithm has been developed to synoptically-map asynoptic measurements, while rejecting small-scale under-sampled variance that is intrinsic to satellite measurements of water vapor, cloud, and other convective properties. The algorithm has been validated against high-resolution Global Cloud Imagery (GCI) , constructed from 6 satellites simultaneously viewing the global convective pattern. It has been applied to synoptically map Upper-tropospheric humidity (UTH) from UARS/MLS. Mapped distributions of UTH have been used, jointly with the GCI, to study how the upper troposphere is humidified. The time-mean distribution of UTH is spatially correlated to the time-mean distribution of cold cloud fraction eta(sub c) (T less than 230 K). Regions of large UTH coincide with regions of large eta(sub c), which mark deep convection. They also coincide with regions of reduced vertical stability, in which the vertical gradient of Theta is weakened by convective mixing. Coldest cloud cover is attended convective overshoots above the local tropopause, which is simultaneously coldest and highest. Together, these features reflect the upper-troposphere being ventilated by convection, which mixes in air from lower levels.

Salby, Murry L.↗
NASA NTRS1983

Data selection techniques in the interpretation of MAGSAT data over Australia

The MAGSAT data require critical selection in order to produce a self-consistent data set suitable for map construction and subsequent interpretation. Interactive data selection techniques are described which involve the use of a special-purpose profile-oriented data base and a colour graphics display. The careful application of these data selection techniques permits validation every data value and ensures that the best possible self-consistent data set is being used to construct the maps of the magnetic field measured at satellite altitudes over Australia.

Johnson, B. D.↗
DOE OSTI2015

Determination of contact maps in proteins: A combination of structural and chemical approaches

Contact map selection is a crucial step in structure-based molecular dynamics modelling of proteins. The map can be determined in many different ways. We focus on the methods in which residues are represented as clusters of effective spheres. One contact map, denoted as overlap (OV), is based on the overlap of such spheres. Another contact map, named Contacts of Structural Units (CSU), involves the geometry in a different way and, in addition, brings chemical considerations into account. We develop a variant of the CSU approach in which we also incorporate Coulombic effects such as formation of the ionic bridges and destabilization of possible links through repulsion. In this way, the most essential and well defined contacts are identified. The resulting residue-residue contact map, dubbed repulsive CSU (rCSU), is more sound in its physico-chemical justification than CSU. It also provides a clear prescription for validity of an inter-residual contact: the number of attractive atomic contacts should be larger than the number of repulsive ones — a feature that is not present in CSU. However, both of these maps do not correlate well with the experimental data on protein stretching. Thus, we propose to use rCSU together with the OV map. We find that the combined map, denoted as OV+rCSU, performs better than OV. In most situations, OV and OV+rCSU yield comparable folding properties but for some proteins rCSU provides contacts which improve folding in a substantial way. We discuss the likely residue-specificity of the rCSU contacts. Finally, we make comparisons to the recently proposed shadow contact map, which is derived from different principles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Identifying Urban Pluvial Frequency Flooding Hotspots Using the Topographic Control Index and Remote Sensing Radar Images for Early Warning Systems

Identifying areas that frequently experience post-rainfall ponding is essential for effective flood mitigation and planning. This study integrates Sentinel-1 radar imagery and the Topographic Control Index (TCI) to identify 378 flood-prone urban depressions in Beaumont, Texas. Out of 159 major rainfall events, only six had Sentinel-1 radar imagery acquired within six hours of peak rainfall, and these were used to generate the flood frequency map; the ground-based flood sensor data were used to verify that these selected events corresponded to actual peak rainfall and to validate radar-detected water pixels. Validation results showed 100% precision, 70.87% recall, an F1-score of 82.95%, and 71.32% overall accuracy. Approximately 84% of medium-to-high TCI depressions overlapped with Beaumont’s two-year inundation map, confirming a strong relationship between TCI and observed flooding. A total of 124 depressions retained significant water, and after excluding 25 engineered detention ponds, 99 natural depressions remained flood vulnerable. Among these, 74 depressions with medium or high TCI were identified as the highest-priority nuisance flooding hotspots. The results demonstrate that combining TCI with radar imagery provides a reliable and cost-effective approach for identifying areas prone to frequent urban ponding. This framework supports practical decision-making for drainage improvements, hotspot identification, and early-warning system development in urban flood-prone regions.

Sentinel-1 radar imagery↗
DOE OSTI2019

First Step in Validating the Radiological Inventories of the Current French Nuclear Fleet - 19000

To anticipate the evolution of the mechanical characteristics of its PWR vessels, EDF developed a vessels fluence monitoring program. This program was based on vessel samples and neutron dosimeters deployed between the fuel assemblies and vessels. These samples and dosimeters are regularly analyzed in laboratories. To calculate the radioactive inventories, we have developed a calculation scheme which includes a 3D mapping of the neutron flux, the calculation of the radiological inventories of the structures of interest, and finally the validation of the results. The validation needs samples to propose calculation/measurement ratios. Unfortunately before the final shut down, the internal and vessel samplings are not possible. To anticipate the decommissioning of the current French nuclear fleet, this paper shows how the samples of the vessels fluence monitoring program can be used to validate the calculated radiological inventories. Using state-of-the-art simulations (i.e. 3D geometric model, 3D neutron sources, 3D neutron propagation, operational fuel loading coupled with effective power distributions) we calculated the radiological inventories of some vessel fluence monitoring program samples. The comparisons between calculated and measured results were done on 'standard chemical elements'. To qualify a chemical element as 'standard', many criteria must be satisfied such as a high concentration level, a low uncertainty about concentration, activation into an expanded cross section range, production of radionuclides having significant half-lives and finally no difficulties measuring the radionuclides produced. The retained 'standard' is Fe which produces, under neutrons flux, Fe-55. The comparisons show that the calculations slightly overestimate the measurements. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1989

Cloud cover determination in polar regions from satellite imagery

The objectives are to develop a suitable validation data set for evaluating the effectiveness of the International Satellite Cloud Climatology Project (ISCCP) algorithm for cloud retrieval in polar regions, to identify limitations of current procedures and to explore potential means to remedy them using textural classifiers, and to compare synoptic cloud data from model runs with observations. Toward the first goal, a polar data set consisting of visible, thermal, and passive microwave data was developed. The AVHRR and SMMR data were digitally merged to a polar stereographic projection with an effective pixel size of 5 sq km. With this data set, two unconventional methods of classifying the imagery for the analysis of polar clouds and surfaces were examined: one based on fuzzy sets theory and another based on a trained neural network. An algorithm for cloud detection was developed from an early test version of the ISCCP algorithm. This algorithm includes the identification of surface types with passive microwave, then temporal tests at each pixel location in the cloud detection phase. Cloud maps and clear sky radiance composites for 5 day periods are produced. Algorithm testing and validation was done with both actural AVHRR/SMMR data, and simulated imagery. From this point in the algorithm, groups of cloud pixels are examined for their spectral and textural characteristics, and a procedure is developed for the analysis of cloud patterns utilizing albedo, IR temperature, and texture. In a completion of earlier work, empirical analyses of arctic cloud cover were explored through manual interpretations of DMSP imagery and compared to U.S. Air Force 3D-nephanalysis. Comparisons of observed cloudiness from existing climatologies to patterns computed by the GISS climate model were also made.

Barry, R. G.↗
NASA NTRS2002

Application of DPIV to Enhanced Mixing Heated Nozzle Flows

Digital Particle Imaging Velocimetry (DPIV) is a planar velocity measurement technique that continues to be applied to new and challenging engineering research facilities while significantly reducing facility test time. DPIV was used in the GRC Nozzle Acoustic Test Rig (NATR) to characterize the high temperature (560 C), high speed (is greater than 500 m/s) flow field properties of mixing enhanced jet engine nozzles. The instantaneous velocity maps obtained using DPIV were used to determine mean velocity, rms velocity and two-point correlation statistics to verify the true turbulence characteristics of the flow. These measurements will ultimately be used to properly validate aeroacoustic model predictions by verifying CFD input to these models. These turbulence measurements have previously not been possible in hot supersonic jets. Mapping the nozzle velocity field using point based techniques requires over 60 hours of test time, compared to less than 45 minutes using DPIV, yielding a significant reduction in testing time. A dual camera DPIV configuration was used to maximize the field of view and further minimize the testing time required to map the nozzle flow. The DPIV system field of view covered 127 by 267 mm. Data were acquired at 19 axial stations providing coverage of the flow from the nozzle exit to 2.37 in downstream. At each measurement station, 400 image frame pairs were acquired from each camera. The DPIV measurements of the mixing enhanced nozzle designs illustrate the changes in the flow field resulting in the reduced noise signature.

Wernet, Mark P.↗
DOE OSTI2015

Clinical Validation of 4-Dimensional Computed Tomography Ventilation With Pulmonary Function Test Data

Purpose: A new form of functional imaging has been proposed in the form of 4-dimensional computed tomography (4DCT) ventilation. Because 4DCTs are acquired as part of routine care for lung cancer patients, calculating ventilation maps from 4DCTs provides spatial lung function information without added dosimetric or monetary cost to the patient. Before 4DCT-ventilation is implemented it needs to be clinically validated. Pulmonary function tests (PFTs) provide a clinically established way of evaluating lung function. The purpose of our work was to perform a clinical validation by comparing 4DCT-ventilation metrics with PFT data. Methods and Materials: Ninety-eight lung cancer patients with pretreatment 4DCT and PFT data were included in the study. Pulmonary function test metrics used to diagnose obstructive lung disease were recorded: forced expiratory volume in 1 second (FEV1) and FEV1/forced vital capacity. Four-dimensional CT data sets and spatial registration were used to compute 4DCT-ventilation images using a density change–based and a Jacobian-based model. The ventilation maps were reduced to single metrics intended to reflect the degree of ventilation obstruction. Specifically, we computed the coefficient of variation (SD/mean), ventilation V20 (volume of lung ≤20% ventilation), and correlated the ventilation metrics with PFT data. Regression analysis was used to determine whether 4DCT ventilation data could predict for normal versus abnormal lung function using PFT thresholds. Results: Correlation coefficients comparing 4DCT-ventilation with PFT data ranged from 0.63 to 0.72, with the best agreement between FEV1 and coefficient of variation. Four-dimensional CT ventilation metrics were able to significantly delineate between clinically normal versus abnormal PFT results. Conclusions: Validation of 4DCT ventilation with clinically relevant metrics is essential. We demonstrate good global agreement between PFTs and 4DCT-ventilation, indicating that 4DCT-ventilation provides a reliable assessment of lung function. Four-dimensional CT ventilation enables exciting opportunities to assess lung function and create functional avoidance radiation therapy plans. The present work provides supporting evidence for the integration of 4DCT-ventilation into clinical trials.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
NASA NTRS1996

Random-breakage mapping method applied to human DNA sequences

The random-breakage mapping method [Game et al. (1990) Nucleic Acids Res., 18, 4453-4461] was applied to DNA sequences in human fibroblasts. The methodology involves NotI restriction endonuclease digestion of DNA from irradiated calls, followed by pulsed-field gel electrophoresis, Southern blotting and hybridization with DNA probes recognizing the single copy sequences of interest. The Southern blots show a band for the unbroken restriction fragments and a smear below this band due to radiation induced random breaks. This smear pattern contains two discontinuities in intensity at positions that correspond to the distance of the hybridization site to each end of the restriction fragment. By analyzing the positions of those discontinuities we confirmed the previously mapped position of the probe DXS1327 within a NotI fragment on the X chromosome, thus demonstrating the validity of the technique. We were also able to position the probes D21S1 and D21S15 with respect to the ends of their corresponding NotI fragments on chromosome 21. A third chromosome 21 probe, D21S11, has previously been reported to be close to D21S1, although an uncertainty about a second possible location existed. Since both probes D21S1 and D21S11 hybridized to a single NotI fragment and yielded a similar smear pattern, this uncertainty is removed by the random-breakage mapping method.

NASA Discipline Radiation Health↗
DOE OSTI2012

Entropy excess in strongly correlated Fermi systems near a quantum critical point

A system of interacting, identical fermions described by standard Landau Fermi-liquid (FL) theory can experience a rearrangement of its Fermi surface if the correlations grow sufficiently strong, as occurs at a quantum critical point where the effective mass diverges. As yet, this phenomenon defies full understanding, but salient aspects of the non-Fermi-liquid (NFL) behavior observed beyond the quantum critical point are still accessible within the general framework of the Landau quasiparticle picture. Self-consistent solutions of the coupled Landau equations for the quasiparticle momentum distribution n(p) and quasiparticle energy spectrum {epsilon}(p) are shown to exist in two distinct classes, depending on coupling strength and on whether the quasiparticle interaction is regular or singular at zero momentum transfer. One class of solutions maintains the idempotency condition n{sup 2}(p)=n(p) of standard FL theory at zero temperature T while adding pockets to the Fermi surface. The other solutions are characterized by a swelling of the Fermi surface and a flattening of the spectrum {epsilon}(p) over a range of momenta in which the quasiparticle occupancies lie between 0 and 1 even at T=0. The latter, non-idempotent solution is revealed by analysis of a Poincare mapping associated with the fundamental Landau equation connecting n(p) and {epsilon}(p) and validated by solution of a variational condition that yields the symmetry-preserving ground state. Significantly, this extraordinary solution carries the burden of a large temperature-dependent excess entropy down to very low temperatures, threatening violation of the Nernst Theorem. It is argued that certain low-temperature phase transitions, notably those involving Cooper-pair formation, offer effective mechanisms for shedding the entropy excess. Available measurements in heavy-fermion compounds provide concrete support for such a scenario. - Highlights: Black-Right-Pointing-Pointer Extension of Landau quasiparticle theory to strongly correlated Fermi systems. Black-Right-Pointing-Pointer Analysis of associated topological phase transitions at a quantum critical point. Black-Right-Pointing-Pointer Fermi surface rearrangement featuring hole pockets or emergence of flat bands. Black-Right-Pointing-Pointer Shedding of flat-band excess entropy via pairing transition at very low temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Modulation of thermal conductivity of iron-doped ß-Ga2O3 by helium-ion irradiation

This study examines the impact of helium-ion irradiation on the thermal conductivity of ß-Ga2O3. A laser-based spatial domain thermoreflectance technique is used to investigate thermal conductivity map for both un-irradiated and irradiated ß-Ga2O3, which are then validated against simulation results derived from density functional theory-based phonon transport simulations. Since helium bubble evolution was ob- served at the nanoscale using transmission electron microscopy, the simulation study was carried out on eight distinct helium-induced sites in ß-Ga2O3. Our findings indicate a reduction in thermal conductivity for the irradiated samples. Experimental results show a significant reduction in thermal conductivity in irradiated samples, with de- creases of approximately 25% along the [100] direction and 40% along [001] directions. Phonon transport simulations closely replicate these findings, particularly when helium occupying interstitial sites, predicting reductions of ˜53% along [100] and ˜50% along [001] directions. This work underscores the role of irradiation-induced microstructural changes in the heat transport properties of ß-Ga2O3 which is crucial for its application in sensor devices in extreme environments.

36 - MATERIALS SCIENCE↗
DOE OSTI2017

Distributed temperature sensing inside a 19-rod bundle

The temperature field within a model of a sodium-cooled fast reactor fuel rod bundle was measured using Ø155 μm fiber optic distributed temperature sensors (DTS). The bundle consists of 19 electrically-heated rods Ø6.3 mm and 865 mm long. Working fluids were argon and air at atmospheric pressure and Reynolds numbers up to 300. A 20 m-long DTS was threaded through Ø1 mm capillaries wound around rods as wire-wraps. The sensor generated 173 measurements along each rod at 5 mm resolution for a total of 3300 data locations. A second DTS, 58 m long, was suspended between rods to provide 9300 fluid temperature measurements at 20 mm resolution. Such data density makes it possible to construct 3D maps of the temperature field that are beyond the reach of traditional sensors such as thermocouples. This is illustrated through a series of steady-state and transient tests. As a result, the work demonstrates the feasibility of mapping temperature within the close confines of a rod bundle at resolutions suitable for validation of computational fluid dynamics codes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗