Search NASA⌕ Search

SEARCH · Search NASA

Results for “new battery cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Understanding Discharge‐Driven Growth of Cathode Impedance in Ni‐Rich NMC Cathodes

Degradation of LiNi x Mn y Co 1-x-y O 2 (NMC)-based lithium-ion batteries depends strongly on cut-off voltage ranges. In addition to the high upper cut-off voltage, a high depth of discharge (i.e., lower cut-off voltage) significantly worsens cathode impedance growth and capacity fade during long-term cycling. However, there is currently no consensus on the mechanism behind the negative role of a deep discharge. Here, this phenomenon was investigated in graphite||NMC cells with single-crystal cathodes (LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NMC622) or LiNi 0.76 Co 0.14 Mn 0.10 O 2 (NMC76)) using targeted aging protocols (constant high-voltage holds vs. charge–discharge cycling), while monitoring transition-metal (TM) dissolution, cathode-electrolyte interface (CEI) impedance, and NMC surface composition. We demonstrate a correlation between discharge-driven CEI impedance growth and increased TM dissolution. Furthermore, this degradation pathway is more pronounced in lower-Ni NMC622 than in higher-Ni (NMC76) under comparable delithiation states at charge, with both compositions undergoing the H2→H3 phase transition. X-ray photoelectron spectroscopy (XPS) reveals NMC composition-dependent evolution of surface lattice oxygen and restructured surface layer composition between charged and discharged states. These findings add mechanistic depth to the role of discharge as an active driver of interfacial degradation and provide new insights into its composition dependence.

25 ENERGY STORAGE↗
DOE OSTI2021

Superior long-term cycling of high-voltage lithium-ion batteries enabled by single-solvent electrolyte

A new single-solvent electrolyte system comprising lithium bis(fluorosuflonyl) imide (LiFSI) and beta-fluorinated sulfone (TFPMS) was designed to enable very stable long-term cycling of high-voltage lithium-ion batteries. Compared to other fluorinated solvents such as alpha-fluorinated sulfone (FMES) and fluorinated carbonate (FEMC), which are prone to reduction on the graphite anode, the LiFSI-TFPMS system displayed outstanding compatibility with graphite. While regular carbonate and sulfone from the LiFSI electrolyte system are compatible with the graphite anode, their high solvating power not only induces severe corrosion on the aluminum cathode current collector at high voltage, but also renders a low aggregation level at a normal salt concentration (about 1.0 M), resulting in the formation of an unstable solid-electrolyte interphase (SEI) on the graphite anode. Owing to the low solvating power of TFPMS, the aggregation level of the LiFSI-TFPMS system is relatively high even at normal salt concentration, which not only facilitates the formation of a robust SEI by the sacrificial decomposition of LiFSI, but also suppresses the aluminum corrosion of the LiFSI electrolyte system at high voltage. Together with the high intrinsic anodic stability of TFPMS, the superior cycling performance of graphite parallel to LiNi 0.6 Co 0.2 Mn 0.2 O 2 cells was achieved by employing the non-flammable LiFSI-TFPMS single-solvent electrolyte system.

25 ENERGY STORAGE↗
DOE OSTI2022

Composition Dependent Electrochemical Properties of Earth-Abundant Ternary Nitride Anodes

Growing energy storage demands on lithium-ion batteries necessitate exploration of new electrochemical materials as next-generation battery electrode materials. In this work, we investigate the previously unexplored electrochemical properties of earth-abundant and tunable Zn 1-x Sn 1+x N 2 (x = -0.4 to x = 0.4) thin films, which show high electrical conductivity and high gravimetric capacity for Li insertion. Enhanced cycling performance is achieved compared to previously published end-members Zn 3 N 2 and Sn 3 N 4 , showing decreased irreversible loss and increased total capacity and cycle stability. The average reversible capacity observed is >1050 mAh/g for all compositions and 1220 mAh/g for Zn-poor (x = 0.2) films. Extremely Zn-rich films (x = -0.4) show improved adhesion; however, Zn-rich films undergo a phase transformation on the first cycle. Zn-poor and stoichiometric films do not exhibit significant phase transformations which often plague nitride materials and show no required overpotential at the 0.5 V plateau. Cation composition x is explored as a mechanism for tuning relevant mechanical and electrochemical properties, such as capacity, overpotential, phase transformation, electrical conductivity, and adhesion. The lithiation/delithiation experiments confirm the reversible electrochemical reactions. Without any binding additives, the as-deposited electrodes delaminate resulting in fast capacity degradation. We demonstrate the mechanical nature of this degradation through decreased electrode thinning, resulting in cells with improved cycling stability due to increased mechanical stability. Combining composition and electrochemical analysis, this work demonstrates for the first time composition dependent electrochemical properties for the ternary Zn 1-x Sn 1+x N 2 and proposes earth-abundant ternary nitride anodes for increased reversible capacity and cycling stability.

25 ENERGY STORAGE↗
NASA NTRS2004

Construction and Analysis of Electronic circuits

The Aviation Environmental Technical Branch produces many various types of aeronautical research that benefits the NASA mission for space exploration and in turn, produces new technology for our nation. One of the present goals of the Aviation Environmental Technical Branch is to create better engines for airplanes by testing supersonic jet propulsion and safe fuel combustion. During the summer of 2004, I was hired by Vincent Sattenvhite Chief executive of the Aviation Environmental Technical Branch to Assist Yves Lamothe with a fuel igniter circuit. Yves Lamothe is an electrical engineer who is currently working on safe fuel combustion testing. This testing is planned to determine the minimum ignition energy for fuel and air vapors of current and alternative fuels under simulated flight conditions. An air temperature bath will provide simulated flight profile temperatures and the heat fluxes to the test chamber. I was assigned with Yves to help complete the igniter circuit which consists of a 36k voltage supply an oscilloscope, and a high voltage transistor switch. During my tenure in the L.E.C.I.R.P. program I studied the basics of electricity and circuitry along with two other projects that I completed. In the beginning of my internship, I devote all of my time to research the aspects of circuitry so that I would be prepared for the projects that I was assigned to do. I read about lessons on; the basic physical concepts of electronics, Electrical units, Basic dc circuits, direct current circuit analysis, resistance and cell batteries, various types of magnetism , Alternating current basics, inductance, and power supplies. I received work sheets and math equations from my Mentor so that I could be able to apply these concepts into my work. After I complete my studies, I went on to construct a LED chaser circuit which displays a series of light patterns using a 555 timer. I incorporated a switch and motion detector into the circuit to create basic alarm system. This project challenged my ability to interpret a schematic and expand it. While I was still completing the LED chaser circuit I Also was given A Basic Stamp Toddler Robot to build and program. The Toddler robot can walk in 36 various styles using advanced robotics. I used many different programs to create movement and direction of the robot. Also the Toddler can use infrared vision to sense objects. This enables the robot to maneuver indefinitely without running into objects. During my tenure at the NASA Glen Research Center I definite utilized the NASA mission to educate. I learned valuable information to help in my up coming year as a freshman in college.

Thomas, Ashley N.↗
DOE OSTI2025

Synthesis and post-heating treatment of inorganic NaF·Na 3 SbS 4 solid electrolytes

Sulfide-type sodium (Na) solid electrolytes (SEs) with halide doping have attracted serious interest due to their high ionic conductivity and great potential in solid-state Na batteries. While other halogens such as Cl, Br, I have been studied to enhance Na-ion transport in sulfide-type SEs, the introduction of fluorine (F) is rarely investigated. Moreover, synthetic parameters such as heating treatment temperatures strongly influence the structure and conductive properties of halide-doped sulfide SEs. Herein, we prepared xNaF·(1-x)Na 3 SbS 4 nanocomposites with varying concentration of F using a low-temperature (150 °C) heating method, and studied the effects of post-heating treatment on structure and conductivity. In-situ neutron diffraction was employed to investigate the structural evolution of X-doped Na 3 SbS 4 (X = F, Cl) during the post-heating treatment and cooling process. In addition, the post-heating treatment at 300 °C leads to increased ionic conductivity of xNaF·(1-x)Na 3 SbS 4 nanocomposites with various F contents. After 300 °C post-heating treatment, 0.2NaF·0.8Na 3 SbS 4 exhibited the highest conductivity of 0.48 mS cm –1 at room temperature. Moreover, improved electrochemical stability was also observed in Na-Sn symmetric cells, specially, with prolonged stable cycling for 300 h and much lower polarization voltage (<0.35 V). Furthermore, this work highlights the importance of post-heating treatment on the structural evolution and its role in exploring new halide-incorporated sulfide-type SEs, promoting the development of inorganic solid-state ionic conductors.

25 ENERGY STORAGE↗
DOE OSTI2022

Characterization of the structure and chemistry of the solid–electrolyte interface by cryo-EM leads to high-performance solid-state Li-metal batteries

Solid-state lithium-metal (Li 0 ) batteries are gaining traction for electric vehicle applications because they replace flammable liquid electrolytes with a safer, solid-form electrolyte that also offers higher energy density and better resistance against Li dendrite formation. Solid polymer electrolytes (SPEs) are highly promising candidates because of their tunable mechanical properties and easy manufacturability; however, their electrochemical instability against lithium metal (Li 0 ), mediocre conductivity, and poorly understood Li 0 /SPE interphases have prevented extensive application in real batteries. In particular, the origin of the low Coulombic efficiency (CE) associated with SPEs remains elusive, as the debate continues as to whether it originates from unfavored interfacial reactions or lithium dendritic growth and dead lithium formation. In this work, we use state-of-the-art cryo-electromicroscopy (cryoEM) imaging and spectroscopic techniques to characterize the structure and chemistry of the interface between Li 0 and a polyacrylate-based SPE. Contradicting the conventional knowledge, we find that no protective interphase forms, owing to the sustained reactions between deposited Li dendrites and polyacrylic backbones and succinonitrile plasticizer. Due to the reaction induced volume change, large amounts of cracks form inside the Li dendrites with a stress corrosion-cracking behavior, indicating that Li0cannot be passivated in this SPE system. Based on this observation, we then introduce additive engineering leveraging on the knowledge of liquid electrolytes, and demonstrate that the Li 0 surface can be effectively protected against corrosion using fluoroethylene carbonate (FEC), leading to densely packed Li 0 domes with conformal and stable solid-electrolyte interphases (SEIs) films. Owing to the high room temperature ionic conductivity of 1.01 mS/cm -1 , the high transference number of 0.57 and the stabilized lithium electrolyte interface, this improved new SPE delivers an excellent lithium plating/stripping CE of 99% and 1800 hours of stable cycling in Li||Li symmetric cells (0.2 mA/cm -2 , 1mAh/cm -2 ). Furthermore, this improved cathodic stability along with the high anodic stability enables record high cycle life of >2000 cycles for Li||LiFePO 4 and >400 cycles for Li||LiCoO 2 full cells.

25 ENERGY STORAGE↗
NASA NTRS2021

Low Cost Access to Mars Surface using a Small Impact Lander

In order to reduce the cost of landing small payloads on Mars, a new technology is being developed: the Small High Impact Energy Landing Device concept (SHIELD). The purpose of SHIELD is to provide a low-cost option to deliver up to 6 kg of science payload to the surface of Mars. SHIELD could be launched as a hosted payload, rideshare on as a secondary payload adapter, or launching from a dedicated small launch vehicle using a kick stage to get to Mars. In order to enable delivery of low cost, SHIELD uses a large diameter deployed drag surface (> 2 m diameter) and low entry mass (< 50 kg) to achieve a very low ballistic coefficient (< 10 kg/m^2): this low ballistic coefficient results in low terminal velocity (< 70 m/sec) without requiring a parachute. Upon impacting the Martian surface at terminal velocity, SHIELD uses a mechanism to decelerate the payload to rest in a robust and predictable manner that limits acceleration of the payload to < 2000 g with a duration less than 8 milliseconds. The SHIELD concept payload subsystem includes a “ruggedized” small warm electronics box (WEB). The WEB houses the telecommunications, command and data handling, thermal control, electrical power, and payload subsystems while maintaining an internal operating temperature ranging between -20° to 20° C. The system is designed to survive the Martian night by utilizing electric heaters powered in a highly insulated box that is powered solar cells and secondary batteries. The WEB is designed to be impact resistant, capable of surviving an impact acceleration pulse equal to or less than 2000 g’s.

Woolley, Ryan↗
NASA NTRS2007

The NASA "PERS" Program: Solid Polymer Electrolyte Development for Advanced Lithium-Based Batteries

In fiscal year 2000, The National Aeronautics and Space Administration (NASA) and the Air Force Research Laboratory (AFRL) established a collaborative effort to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The ultimate objective of this development program, which was referred to as the Polymer Energy Rechargeable System (PERS), was to establish a world-class technology capability and U.S. leadership in polymer-based battery technology for aerospace applications. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. Out of a total of 38 proposals received in response to a NASA Research Announcement (NRA) solicitation, 18 proposals (13 contracts and 5 grants) were selected for initial award to address these technical challenges. Brief summaries of technical approaches, results and accomplishments of the PERS Program development efforts are presented. With Agency support provided through FY 2004, the PERS Program efforts were concluded in 2005, as internal reorganizations and funding cuts resulted in shifting programmatic priorities within NASA. Technically, the PERS Program participants explored, to various degrees over the lifetime of the formal program, a variety of conceptual approaches for developing and demonstrating performance of a viable advanced solid polymer electrolyte possessing the desired attributes, as well as several participants addressing all components of an integrated cell configuration. Programmatically, the NASA PERS Program was very successful, even though the very challenging technical goals for achieving a viable solid polymer electrolyte material or the overall envisioned long-term, program objectives were not met due to funding reductions. The NASA PERS Program provided research opportunities and generated and disseminated a wealth of new scientific knowledge and technical competencies within the polymer electrolyte area.

Baldwin, Richard S.↗
DOE OSTI2026

Covalent adaptable networks for electrolyte–binder integration in recyclable lithium metal batteries

Lithium-metal batteries (LMBs) are considered a promising next-generation energy storage technology due to their exceptionally high energy density. However, the development of solid polymer electrolytes and cathode binders for LMBs faces critical challenges, including interfacial instability, poor recyclability, and growing environmental concerns. In particular, current systems often rely on non-recyclable components featuring permanently crosslinked networks and polyfluoroalkyl substances (PFAS), such as poly(vinylidene fluoride) (PVDF), which cause battery waste and environmental harm. Herein, we introduce a multifunctional covalent adaptable network (CAN) platform based on thermally reversible Diels–Alder (DA) chemistry, designed for dual functionality as a CAN-based electrolyte (CAE) and a CAN-based cathode binder. The CAE achieves high ionic conductivity and strong storage modulus (1.4 mS cm −1 and ∼ 10 5 Pa at room temperature, respectively) and enables stable long-term cycling in symmetric Li||Li cells for over 2000 h with low overpotential. When it is applied as a cathode binder in LiFePO 4 (LFP) composite electrodes (C-LFP), the CAN matrix significantly reduces interfacial resistance and enhances discharge capacity compared to conventional PVDF-based systems. Thermal treatment induces self-healing at the cathode–electrolyte interface, further improving contact and yielding a discharge capacity of 150 mAh g −1 at 0.5 C. Moreover, the dynamic CAN architecture allows efficient recovery and reuse of lithium salts from spent electrolytes through retro-DA reactions under mild conditions (∼80 °C), establishing a low-energy, cost-effective recycling pathway. In conclusion, this work presents a scalable and sustainable strategy for high-performance LMBs by integrating recyclability, interfacial healing, and PFAS-free design, offering a holistic solution aligned with circular economy principles and next-generation battery demands.

Diels–Alder↗
DOE OSTI2023

Dicarbonyl Electrolyte for High-Voltage Lithium Metal Batteries: Importance of the Entropy of Solvation in Bidentate Solvent

An electrolyte system based on dicarbonyl solvents has been proposed and implemented in lithium metal batteries (LMBs). Among several dicarbonyl solvents explored, dimethyl dicarbonate (DMDC) emerged as the most promising electrolyte candidate. Interestingly, despite the structural similarities between DMDC and its monocarbonyl counterpart DMC, the DMDC electrolyte exhibits higher solvent coordination, even at the same lithium-to-carbonyl ratio. Further, this leads to the formation of a more robust solid-electrolyte interphase and enhances the anodic stability of the electrolyte. Notably, in various electrolyte systems, the solvation energy is typically enthalpy-driven. However, the bidentate nature of DMDC introduces a significant role for the entropy of solvation because the Li + -DMDC complexes release fewer free molecules. With the addition of non-solvating co-solvent 1,1,2,2-tetrafluoro-ethyl 2,2,3,3-tetrafluoro-propyl ether (TTE), which reduces the viscosity of the electrolyte, the DMDC-TTE system enables remarkably stable cycling of the lithium anode by manipulating the entropy of solvation. This introduces a new strategy for tailoring functional electrolyte systems.

25 ENERGY STORAGE↗
DOE OSTI2025

Scalable mechanochemical synthesis of high-quality Prussian blue analogues for high-energy and durable potassium-ion batteries

Prussian blue analogues (PBAs) are recognized as promising cathode materials for potassium-ion batteries (PIBs), particularly the low-cost and high-energy K 2 Mn[Fe(CN) 6 ](KMnF). However, conventional solution-based synthesis inevitably introduces [Fe(CN) 6 ] 4− defects and lattice water while suffering low synthesis efficiency, unfavorable to the improvement of electrochemical performance and scalability. Here, in this work, we report a simple solvent-free mechanochemical strategy for the synthesis of a wide variety of K 2 M[Fe(CN) 6 ] (M = Mn, Mg, Ca, etc.) with negligible defects and water, and it is unprecedented to achieve kilogram-level products of high-quality KMnF within just 10 minutes. The as-prepared KMnF delivers a high energy density of 590 Wh kg −1 at 0.2 C and exhibits an astonishing stability over 10 000 cycles and rate ability up to 50 C in a potassium metal half-cell. Encouragingly, a high-areal-capacity pouch cell with 2.2 mAh cm −2 (16.5 mg cm −2 ) exhibits a capacity retention of 80.7% after 500 cycles. Furthermore, systematic in situ characterization reveals underlying mechanism insights into structure–performance relationships. Specifically, the fully coordinated Mn–N 6 octahedral configuration effectively suppresses Mn 3+ Jahn–Teller distortion, enabling reversible phase transitions under both high-voltage and long-term cycling conditions. In addition, minimal defects provide sufficient redox centers, while the continuous three-dimensional framework facilitates rapid K + diffusion kinetics. This work provides a new opportunity for the ultrafast, universal and scalable synthesis of high-quality PBAs, facilitating the practical application of PIBs while enabling precise structural and compositional design of novel PBAs.

Mechanochemical method↗
DOE OSTI2021

Discovery of Energy Storage Molecular Materials Using Quantum Chemistry-Guided Multiobjective Bayesian Optimization

Redox flow batteries (RFBs) are a promising technology for stationary energy storage applications due to their flexible design, scalability, and low cost. In RFBs, energy is carried in flowable redoxactive materials (redoxmers) which are stored externally and pumped to the cell during operation. Further improvements in the energy density of RFBs necessitates redoxmer designs with wider redox potential windows and higher solubility. Additionally, designing redoxmers with a fluorescence-enabled self-reporting functionality allows monitoring of the state of health of RFBs. To accelerate the discovery of redoxmers with desired properties, state-of-the- art machine learning ( ML) methods, such as multiobjective Bayesian optimization (MBO), are useful. Here, we first employed density functional theory calculations to generate a database of reduction potentials, solvation free energies, and absorption wavelengths for 1400 redoxmer molecules based on a 2,1,3-benzothiadiazole (BzNSN) core structure. From the computed properties, we identified 22 Pareto-optimal molecules that represent best trade-off among all of the desired properties. We further utilized these data to develop and benchmark an MBO approach to identify candidates quickly and efficiently with multiple targeted properties. With MBO, optimal candidates from the 1400-molecule data set can be identified at least 15 times more efficiently compared to the brute force or random selection approach. Importantly, we utilized this approach for discovering promising redoxmers from an unseen database of 1 million BzNSN-based molecules, where we discovered 16 new Pareto-optimal molecules with significant improvements in properties over the initial 1400 molecules. Furthermore, we anticipate that this active learning technique is general and can be utilized for the discovery of any class of functional materials that satisfies multiple desired property criteria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effects of catholyte aging on high-nickel NMC cathodes in sulfide all-solid-state batteries

Sulfide solid-state electrolytes (SSEs) in all-solid-state batteries (SSBs) are recognized for their high ionic conductivity and inherent safety. The LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathode offers a high thermodynamic potential of approximately 3.8 V vs. Li/Li + and a theoretical specific capacity of 200 mA h g −1 . However, the practical utilization of NMC811 in sulfide SSBs faces significant interfacial challenges. The oxidation instability of sulfide solid electrolytes against NMC811 and the formation of the cathode electrolyte interphase (CEI) during cycling lead to degradation and reduced cell performance. Volumetric changes in NMC during lithiation and de-lithiation can also cause detachment from sulfide electrolytes or internal particle cracking. Despite extensive galvanostatic cycling studies to address the issues, the calendar life of sulfide SSBs remains poorly understood. Here, we systematically studied the effects of four different catholytes on the calendar aging of LiNbO 3 (LNO)-coated NMC811, including Li 6 PS 5 Cl (LPSCl), Li 3 InCl 6 –Li 6 PS 5 Cl (LIC–LPSCl), Li 3 YCl 6 –Li 6 PS 5 Cl (LYC–LPSCl), and Li 10 GeP 2 S 12 (LGPS). Our results indicate that LPSCl provides optimal capacity retention when stored at high state-of-charge (SOC) at room temperature, but the LIC–LPSCl cathode shows significant capacity degradation and chemical incompatibility. We also established an effective electrochemical calendar aging testing protocol to simulate daily usage, enabling quick inference of the calendar life of SSBs. In conclusion, this new testing approach accelerates materials selection strategies for high-nickel NMC composite cathodes in sulfide SSBs.

25 ENERGY STORAGE↗
DOE OSTI2020

In Situ X-Ray Absorption Spectroscopy Disentangles the Roles of Copper and Silver in a Bimetallic Catalyst for the Oxygen Reduction Reaction

Silver-based bimetallic catalysts for the oxygen reduction reaction (ORR) are promising for a wide variety of renewable energy technologies, including alkaline fuel cells and metal-air batteries. The activity of bimetallic catalysts can sometimes surpass that of either constituent element, but the origin of the enhanced performance is still debated. At a given active site, two complementary mechanisms are proposed to explain the performance improvements: the binding energy of intermediate adsorbates can be tuned by direct electronic contributions from the alloying element or by changes in the bond lengths from lattice distortion. To distinguish between these effects and elucidate the respective roles of each element in the bimetallic, it is critical to study catalysts at the molecular scale under reaction conditions. In this work, we use in situ X-ray absorption spectroscopy (XAS) alongside density functional theory (DFT) to show that direct electronic rather than geometric effects are the primary cause of improved ORR activity in a bimetallic CuAg catalyst. Our results indicate that the local bonding as well as the electronic structure of Ag are virtually unchanged by the presence of Cu, whereas the electronic states of Cu in CuAg are significantly altered. DFT calculations support these experimental findings. We show strong evidence that the activity of the bimetallic CuAg catalyst exceeds the sum of the activities of Cu and Ag, not by incremental improvement of the active Ag sites, but by creating highly active Cu-centered catalytic sites. The insight that the main role of Ag in bimetallic catalysts may be to promote its fellow element through local electronic interactions provides a new design principle for engineering the next generation of bimetallic catalysts for the ORR and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Using chiral-induced spin selectivity as a tool to improve materials and processes for energy science

Studies relating to electrical energy conversion, storage, and generation, date back to the 19th century, however only in recent years have scientists begun to investigate the impact of the electron spin on these processes. Control and manipulation of the electron spin, an intrinsically quantum property of matter, opens new approaches to addressing energy science challenges. Furthermore, the chiral-induced spin selectivity (CISS) effect is enabling for this effort, because of the control over the transport and generation of both pure spin currents and spin-polarized charge currents. In this review article, we begin with a brief introduction on design strategies for the implementation of CISS in materials and then describe recent studies that demonstrate how CISS can be used to improve electrocatalysis and spintronics. Lastly, we conclude with forward-looking thoughts on the next steps for leveraging CISS in energy science.

Batteries↗
DOE OSTI2020

Structural Changes and Reversibility Upon Deintercalation of Li from LiCoPO 4 Derivatives

In an effort to improve the cycle life and rate capability of olivine LiCoPO 4 , Cr, Fe, and Si were added to produce nominal Li 1.025 Co 0.84 Fe 0.10 Cr 0.05 Si 0.01 (PO 4 ) 1.025 . This cathode material has an energy density comparable to LiCoPO 4 , with markedly improved electrochemical performance. Here, we apply operando X-ray diffraction to gain an understanding of the crystallographic delithiation mechanism of this new substituted electrode material, compared to both LiCo 0.75 Fe 0.25 PO 4 and LiCo 0.75 Fe 0.25 PO 4 . Throughout charging, the extent of solid-solution domains was significantly increased in Li 1.025 Co 0.84 Fe 0.10 Cr 0.05 Si 0.01 (PO 4 ) 1.025 and LiCo 0.75 Fe 0.25 PO 4 compared to LiCoPO 4 . These domains reduce the mechanical strain during electrode function, providing a clear explanation for the high durability with Co substitution. Li 1.025 Co 0.84 Fe 0.10 Cr 0.05 Si 0.01 (PO 4 ) 1.025 operated at notably higher average potential than LiCo 0.75 Fe 0.25 PO 4 , which would increase the energy density of the cell. Ex situ measurements reveal the persistence of structural irreversibilities in the substituted phase after the first cycle, identifying avenues for further improvement in durability. Overall, this finding sheds light on the strategies for judicious cation substitution in LiCoPO 4 electrodes to maximize the cycle life while preserving high energy density, especially compared to LiFePO 4 .

25 ENERGY STORAGE↗
DOE OSTI2022

Development of Numerical Model of Metal Foam with PCM for the Estimation of Effective Thermal Conductivity

Global warming due to climate change is a threat to humankind. Nuclear energy is one of the promising solutions to reduce fossil fuel usage. Nuclear energy can handle the base load, compensating for the volatility of renewable energy. If nuclear energy could achieve load following capability, the combination with renewable energy would be more suitable. Thermal energy storage (TES) is one of the options for enabling load following of nuclear reactors. The TES makes it possible to store surplus nuclear thermal energy and release it later as needed. In Idaho National Laboratory (INL), a new concept of latent heat TES integrated with high-temperature heat pipe has been proposed and is under development, which is called Heat pipe-Integrated Thermal Battery (HITB). HITB exchanges thermal energy between the reactor system and TES via heat pipe. The heat transferred to TES medium, made of phase change material (PCM), stores energy as sensible heat and/or latent heat. As PCM typically has poor thermal conductivity, however, various heat transfer enhancement techniques are required to achieve a rapid charging cycle. There are many techniques to enhance the heat transfer ability of TES medium such as disk, fin, and metal foam. Among them, metal foam is an appropriate option to enhance the heat transfer because it maximizes the heat transfer area through metal wicks. Metal foam is a lightweight metal structure that has a high porosity of over 0.9. The typical materials for metal foam are Aluminum, Copper, Nickel, and Silicon Carbide (SiC). Metal foam not only enhances heat transfer via conduction but also increases contact surface area. In the HITB design , the metal foam is being considered as one of the options to enhance the heat transfer of TES medium (PCM) [1]. To predict the enhanced thermal performance of TES, one should properly estimate the effective thermal conductivity of metal foam combined with PCM material or calculate heat transfer in distributed model. There are many experimental works that provides effective thermal conductivity of metal foam with various PCM [2,3]. Also, many theoretical models were developed based on the unit cell model of metal foam [4,5]. With a distributed model, on the other hand, detail heat transfer characteristics between metal foam and PCM material can be analyzed considering the geometry or buoyancy effect. However, due to the complex geometry of metal foam pores, the computational cost for three-dimensional modeling highly increases. Therefore, if metal foam structure can be modeled in simple and repetitive design, the computational cost would decrease Among the various metal foam models [2], lattice model is one of the simple and extendable design. The porosity and pores per inch (PPI) can be characterized by the size and spatial distance of lattice structure. If the three-dimensional metal foam model consists of lattice structure could properly estimate the heat transfer, which is characterized by effective thermal conductivity, it would be a good option to assess the thermal performance of metal foam with PCM. In this study, a three-dimensional numerical model was developed to simulate conductive heat transfer between metal foam and PCM. The three-dimensional lattice structure of square pillars was selected as a basic structure of the metal foam. The calculation result was characterized by the effective thermal conductivity of the whole domain. A sensitivity study was conducted for mesh size, domain size, and PPI to check whether the calculation result gives a converged result or not. Lastly, the effective thermal conductivity from the lattice model was compared with existing experimental data to validate the model result

25 ENERGY STORAGE↗
DOE OSTI2022

Excitonic Effects in X-ray Absorption Spectra of Fluoride Salts and Their Surfaces

Given their natural abundance and thermodynamic stability, fluoride salts may appear as evolving components of electrochemical interfaces in Li-ion batteries and emergent multivalent ion cells. This is due to the practice of employing electrolytes with fluorine-containing species (salt, solvent, or additives) that electrochemically decompose and deposit on the electrodes. Operando X-ray absorption spectroscopy (XAS) can probe the electrode–electrolyte interface with a single-digit nanometer depth resolution and offers a wealth of insights into the evolution and Coulombic efficiency or degradation of prototype cells, provided that the spectra can be reliably interpreted in terms of local oxidation state, atomic coordination, and electronic structure about the excited atoms. Here we explore fluorine K-edge XAS of mono- (Li, Na, and K) and di-valent (Mg, Ca, and Zn) fluoride salts from a theoretical standpoint and discover a surprising level of detailed electronic structure information about these materials despite the relatively predictable oxidation state and ionicity of the fluoride anion and the metal cation. Utilizing a recently developed many-body approach based on the ΔSCF method, we calculate the XAS using density functional theory and experimental spectral profiles are well reproduced despite some experimental discrepancies in energy alignment within the literature, which we can correct for in our simulations. We outline a general methodology to explain shifts in the main XAS peak energies in terms of a simple exciton model and explain line-shape differences resulting from the mixing of core-excited states with metal d character (for K and Ca specifically). Given ultimate applications to evolving interfaces, some understanding of the role of surfaces and their terminations in defining new spectral features is provided to indicate the sensitivity of such measurements to changes in interfacial chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗