Search NASA⌕ Search

SEARCH · Search NASA

Results for “numerical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Unified viscoplastic constitutive equations and their applications

Unified constitutive equations for time- and temperature-dependent metallic plastic deformation have been applied in FEM simulations of forming processes; increasingly powerful computational tools and physical models are being used to numerically model complex engineering problems. Once confidence has been gained through adequate verification, these numerical models will increasingly replace experimental models. Attention is presently given to the contributions made by physical metallurgy, continuum mechanics, and computational mechanics.

Lindholm, U. S.↗
NASA NTRS1993

FNAS computational modeling

Numerical calculations of the electronic properties of liquid II-VI semiconductors, particularly CdTe and ZnTe were performed. The measured conductivity of these liquid alloys were modeled by assuming that the dominant temperature effect is the increase in the number of dangling bonds with increasing temperature. For low to moderate values of electron correlation, the calculated conductivity as a function of dangling bond concentration closely follows the measured conductivity as a function of temperature. Both the temperature dependence of the chemical potential and the thermal smearing in region of the Fermi surface have a large effect on calculated values of conductivity.

Franz, J. R.↗
NASA NTRS1986

Simulation of the thermospheric tides by use of the NCAR thermospheric general circulation model

Numerical calculations of the thermospheric tidal winds and temperatures at equinox are presented. The calculations were made using the National Center for Atmospheric Research Thermospheric General Circulation Model (TGCM), which includes the effects of viscosity, conductivity, diffusion, ion drag, winds, and temperature gradients. The thermospheric diurnal and semidiurnal tides are excited in situ by solar heating and by ion-neutral momentum coupling. The semidiurnal tidal calculations also include the effects of upward propagating waves generated by heating in the lower atmosphere. This semidiurnal propagating component is modeled by use of the classical tidal perturbations as lower boundary conditions. The model is tuned by adjusting the propagating tidal forcing term until calculated semidiurnal wind and temperature fields best approximate incoherent scatter observations. The tidal TGCM results are consistent with previous theoretical work and successfully reproduce high altitude temperature and meridional velocity data, but they give significantly lower magnitudes for velocities and temperatures near 160 km than are seen by observations.

Fensen, C. G.↗
NASA NTRS2017

CIMI Simulations with Newly Developed Multiparameter Chorus and Plasmaspheric Hiss Wave Models

Numerical simulation studies of the Earth's radiation belts are important to understand the acceleration and loss of energetic electrons. The Comprehensive Inner Magnetosphere-Ionosphere (CIMI) model considers the effects of the ring current and plasmasphere on the radiation belts to obtain plausible results. The CIMI model incorporates pitch angle, energy, and cross diffusion of electrons, due to chorus and plasmaspheric hiss waves. These parameters are calculated using statistical wave distribution models of chorus and plasmaspheric hiss amplitudes. However, currently, these wave distribution models are based only on a single-parameter, geomagnetic index (AE) and could potentially underestimate the wave amplitudes. Here we incorporate recently developed multiparameter chorus and plasmaspheric hiss wave models based on geomagnetic index and solar wind parameters. We then perform CIMI simulations for two geomagnetic storms and compare the flux enhancement of megavolt electrons with data from the Van Allen Probes and Akebono satellites. We show that the relativistic electron fluxes calculated with multiparameter wave models resemble the observations more accurately than the relativistic electron fluxes calculated with single-parameter wave models. This indicates that wave models based on a combination of geomagnetic index and solar wind parameters are more effective as inputs to radiation belt models.

Aryan, Homayon↗
NASA NTRSDate not supplied

Using XR for Improving Scientific Discovery With Numerical Weather Models

Our work explores the use of extended reality (XR) to im- prove scientific discovery with numerical weather/climate models that inform Earth science digital twins, specifically the NASA Goddard Earth Observing System (GEOS) global atmospheric model. The overall project is named the Vi- sualization And Lagrangian dynamics Immersive eXtended Reality Toolkit (VALIXR), which has two main areas of focus: (1) enhancing the understanding of and interaction with model output data through advanced visualizations in the XR environment, and (2) the integration of Lagrangian dynamics into the GEOS model, which allows a natural, feature-specific analysis of Earth science phenomena as op- posed to traditional, fixed-point Eulerian dynamics. Here, we report initial work on these focus areas.

Thomas Grubb↗
DOE OSTI2026

Development, Monitoring, and Control of Fracture Thermal Energy Storage (FTES) in Crystalline Rock Formations (DEMO-FTES) (CRADA Final Report)

The DEMO-FTES project sought to demonstrate the thermal efficiency of fracture thermal energy storage (FTES) through numerical simulations, laboratory and meso-scale field tests. A detailed dimensional and scaling analysis was performed to identify key parameters and how they can be most effectively scaled to the laboratory and decameter scale. Numerical models were developed and used for three purposes: 1. Before field experiments, numerical modelling can be used to estimate fracture properties based on previous data from the EGS Collab experiment and then predict thermal hydrological behaviors of the fracture system with hot water injection/withdrawal, therefore, help to design the experiments (e.g., to decide the duration of the cycles based on the flow rate the pump can provide, and the estimated fracture properties); 2. After the field experiment, to estimate the system properties during the experiment (as the size and shape of a fracture could change over time), and understand why system performance is different than what has been predicted, i.e., to help understand the meso-scale test; and, 3. To model the lab experiments and estimate fracture properties and storage efficiency. Ultimately, the experiment and numerical models could shed light on the processes and uncertainty happening during fracture activation and help understand the scaling between lab and field test, and finally, the design and optimization of potential fracture thermal energy storage systems.

25 ENERGY STORAGE↗
NASA NTRS1996

Internal Passage Heat Transfer Prediction Using Multiblock Grids and a Kappa-Omega Turbulence Model

Numerical simulations of the three-dimensional flow and heat transfer in a rectangular duct with a 180 C bend were performed. Results are presented for Reynolds numbers of 17,000 and 37,000 and for aspect ratios of 0.5 and I.O. A kappa-omega turbulence model with no reference to distance to a wall is used. Direct comparison between single block and multiblock grid calculations are made. Heat transfer and velocity distributions are compared to available literature with good agreement. The multi-block grid system is seen to produce more accurate results compared to a single-block grid with the same number of cells.

Rigby, David L.↗
NASA NTRS1988

Time-dependent models of radiatively driven stellar winds. I - Nonlinear evolution of instabilities for a pure absorption model

Numerical radiation-hydrodynamics simulations of the nonlinear evolution of instabilities in radiatively driven stellar winds have been performed. The results show a strong tendency for the unstable flow to form rather sharp rarefactions in which the highest speed material has very low density. The qualitative features of the model agree well with the reqirements of displaced narrow absorption components in UV lines.

Owocki, Stanley P.↗
NASA NTRS1988

Transition mixing study empirical model report

The empirical model developed in the NASA Dilution Jet Mixing Program has been extended to include the curvature effects of transition liners. This extension is based on the results of a 3-D numerical model generated under this contract. The empirical model results agree well with the numerical model results for all tests cases evaluated. The empirical model shows faster mixing rates compared to the numerical model. Both models show drift of jets toward the inner wall of a turning duct. The structure of the jets from the inner wall does not exhibit the familiar kidney-shaped structures observed for the outer wall jets or for jets injected in rectangular ducts.

Srinivasan, R.↗
NASA NTRS2010

Application of Raytracing Through the High Resolution Numerical Weather Model HIRLAM for the Analysis of European VLBI

An important limitation for the precision in the results obtained by space geodetic techniques like VLBI and GPS are tropospheric delays caused by the neutral atmosphere, see e.g. [1]. In recent years numerical weather models (NWM) have been applied to improve mapping functions which are used for tropospheric delay modeling in VLBI and GPS data analyses. In this manuscript we use raytracing to calculate slant delays and apply these to the analysis of Europe VLBI data. The raytracing is performed through the limited area numerical weather prediction (NWP) model HIRLAM. The advantages of this model are high spatial (0.2 deg. x 0.2 deg.) and high temporal resolution (in prediction mode three hours).

Garcia-Espada, Susana↗
NASA NTRS1984

Line emission from H II blister models

Numerical techniques to calculate the thermal and geometric properties of line emission from H II 'blister' regions are presented. It is assumed that the density distributions of the H II regions are a function of two dimensions, with rotational symmetry specifying the shape in three-dimensions. The thermal and ionization equilibrium equations of the problem are solved by spherical modeling, and a spherical sector approximation is used to simplify the three-dimensional treatment of diffuse ionizing radiation. The global properties of H II 'blister' regions near the edges of a molecular cloud are simulated by means of the geometry/density distribution, and the results are compared with observational data. It is shown that there is a monotonic increase of peak surface brightness from the i = 0 deg (pole-on) observational position to the i = 90 deg (edge-on) position. The enhancement of the line peak intensity from the edge-on to the pole-on positions is found to depend on the density, stratification, ionization, and electron temperature weighting. It is found that as i increases, the position of peak line brightness of the lower excitation species is displaced to the high-density side of the high excitation species.

Rubin, R. H.↗
NASA NTRS2017

Interaction of Delaminations and Matrix Cracks in a CFRP Plate, Part II: Simulation Using an Enriched Shell Finite Element Model

Numerical simulations are presented of a recently developed test which creates multiple delaminations in a CFRP laminate specimen that grow and interact via transverse matrix cracks. A novel shell element enriched with the Floating Node Method, and a damage algorithm based on the Virtual Crack Closure Technique, were used to successfully simulate the tests. Additionally, a 3D high mesh fidelity model based on cohesive zones and continuum damage mechanics was used to simulate the tests and act as a representative of other similar state-of-the-art high mesh fidelity modeling techniques to compare to the enriched shell element. The enriched shell and high mesh fidelity models had similar levels of accuracy and generally matched the experimental data. With runtimes of 36 minutes for the shell model and 55 hours for the high mesh fidelity model, the shell model is 92 times faster than the high- fidelity simulation.

Mark W McElroy↗
NASA NTRS1993

Structure of the dayside reconnection layer in resistive MHD and hybrid models

Numerical simulations were performed to investigate the structure of the reconnection layer at the dayside magnetopause. Two typical cases are examined in detail; both are asymmetric in magnetic field and plasma density. In case 1, the guide fields in the magnetosheath and in the magnetosphere are set at zero and thus the tangential magnetic fields on the two sides of the initial current sheet are exactly antiparallel. In case 2, the angle between the tangential magnetic fields on the two sides of the initial current sheet is 145 deg. The results obtained from a resistive MHD model and from a hybrid model are found to be different. In the MHD simulation of case 1, a 2-4 intermediate shock is found to bound the reconnection layer on the magnetosheath side, while an Alfven wave pulse bounds the reconnection layer on the magnetospheric side. In case 2, it is found that a time-dependent intermediate shock (TDIS) bounds the reconnection layer on the magnetosheath side, with a slow expansion wave propagating behind. With the MHD simulations, in the general case in which the tangential magnetic fields on the two sides of the initial current sheet are not exactly antiparallel, a rotational discontinuity across which the tangential magnetic field rotates, a large angle is found to bound the reconnection layer on the magnetosheath side.

Lin, Y.↗
NASA NTRS2012

A Computational Methodology for Simulating Thermal Loss Testing of the Advanced Stirling Convertor

The U.S. Department of Energy (DOE) and Lockheed Martin Space Systems Company (LMSSC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. This generator would use two highefficiency Advanced Stirling Convertors (ASCs), developed by Sunpower Inc. and NASA Glenn Research Center (GRC). The ASCs convert thermal energy from a radioisotope heat source into electricity. As part of ground testing of these ASCs, different operating conditions are used to simulate expected mission conditions. These conditions require achieving a particular operating frequency, hot end and cold end temperatures, and specified electrical power output for a given net heat input. In an effort to improve net heat input predictions, numerous tasks have been performed which provided a more accurate value for net heat input into the ASCs, including the use of multidimensional numerical models. Validation test hardware has also been used to provide a direct comparison of numerical results and validate the multi-dimensional numerical models used to predict convertor net heat input and efficiency. These validation tests were designed to simulate the temperature profile of an operating Stirling convertor and resulted in a measured net heat input of 244.4 W. The methodology was applied to the multi-dimensional numerical model which resulted in a net heat input of 240.3 W. The computational methodology resulted in a value of net heat input that was 1.7 percent less than that measured during laboratory testing. The resulting computational methodology and results are discussed.

Reid, Terry V.↗
NASA NTRS1981

Closed coronal structures. II - Generalized hydrostatic model

Numerical computations of stationary solar coronal loop atmospheres are used to extend earlier analytical work. Two classes of loops are examined, namely symmetric loops with a temperature maximum at the top but now having a length greater than the pressure scale height and loops which have a local temperature minimum at the top. For the first class, new scaling laws are found which relate the base pressure and loop length to the base heating, the heating deposition scale height, and the pressure scale height. It is found that loops for which the length is greater than about two to three times the pressure scale height do not have stable solutions unless they have a temperature minimum at the top. Computed models with a temperature inversion at the top are permitted in a wider range of heating deposition scale height values than are loops with a temperature maximum at the top. These results are discussed in relation to observations showing a dependence of prominence formation and stability on the state of evolution of magnetic structures, and a general scenario is suggested for the understanding of loop evolution from emergence in active regions through the large-scale structure phase to opening in coronal holes.

Serio, S.↗
DOE OSTI2025

Effect of toolpath in large-format additive manufacturing with bio-derived composites

There has been growing interest in integrating bio-derived composites into Large-format additive manufacturing (LFAM) feedstocks to reduce the use of petroleum-derived materials and reduce the overall carbon footprint of LFAM. However, these materials present unique challenges during manufacturing due to their variability, which can lead to unintended deformations and failures attributable to suboptimal process conditions. While numerical modelling has been extensively employed to simulate numerous manufacturing processes, its application in LFAM with bio-derived composites remains limited. This study addresses this gap by systematically developing a numerical model to simulate the LFAM process using bio-based materials, specifically wood fiber-reinforced polylactic acid (PLA/WF). Experimental investigations were conducted to characterise the thermal and mechanical properties of additively manufactured PLA/WF specimens. Numerical simulations were performed to predict temperature profiles and deformations during LFAM. The effect of varying infill patterns, internal structures, and tool paths on the temperature distribution and deformation of printed parts was explored using the developed model. This article aims to advance the utilisation of bio-derived composites in LFAM systems and provide a comprehensive understanding of the LFAM process. The findings offer valuable insights for optimising process parameters and enhancing the performance of LFAM with bio-based composites.

Large-format additive manufacturing↗
NASA NTRS1997

Numerical Study of Magnetic Damping During Unidirectional Solidification

A fully 3-D numerical model is developed to represent magnetic damping of complex fluid flow, heat transfer and electromagnetic field distributions in a melt cavity. The model is developed based on our in-house finite element code for the fluid flow, heat transfer and electromagnetic field calculations. The computer code has been tested against benchmark test problems that are solved by other commercial codes as well as analytical solutions whenever available. The numerical model is tested against numerical and experimental results for water reported in literature. With the model so tested, various numerical simulations are carried out for the Sn-35.5% Pb melt convection and temperature distribution in a cylindrical cavity with and without the presence of a transverse magnetic field. Numerical results show that magnetic damping can be effectively applied to reduce turbulence and flow levels in the melt undergoing solidification and over a certain threshold value a higher magnetic field resulted in a higher velocity reduction. It is found also that for a fully 3-D representation of the magnetic damping effects, the electric field induced in the melt by the applied DC magnetic field does not vanish, as some researchers suggested, and must be included even for molten metal and semiconductors. Also, for the study of the melt flow instability, a long enough time has to be applied to ensure the final fluid flow recirculation pattern. Moreover, our numerical results suggested that there seems to exist a threshold value of applied magnetic field, above which magnetic damping becomes possible and below which the convection in the melt is actually enhanced. Because of the limited financial resource allocated for the project, we are unable to carry out extensive study on this effect, which should warrant further theoretical and experimental study. In that endeavor, the developed numerical model should be very useful; and the model should serve as a useful tool for exploring necessary design parameters for planning magnetic damping experiments and interpreting the experimental results.

Li, Ben Q.↗
NASA NTRS2004

Experimental and Numerical Correlation of Gravity Sag in Solar Sail Quality Membranes

Solar sails are among the most studied members of the ultra-lightweight and inflatable (Gossamer) space structures family due to their potential to provide propellentless propulsion. They are comprised of ultra-thin membrane panels that, to date, have proven very difficult to experimentally characterize and numerically model due to their reflectivity and flexibility, and the effects of gravity sag and air damping. Numerical models must be correlated with experimental measurements of sub-scale solar sails to verify that the models can be scaled up to represent full-sized solar sails. In this paper, the surface shapes of five horizontally supported 25 micron thick aluminized Kapton membranes were measured to a 1.0 mm resolution using photogrammetry. Several simple numerical models closely match the experimental data, proving the ability of finite element simulations to predict actual behavior of solar sails.

Black, Jonathan T.↗