Search NASA⌕ Search

SEARCH · Search NASA

Results for “optimisation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Optimal feedback in efficient ring double-cavity optical parametric oscillators

It is shown that the use of two feedback circuits with matched transfer constants and optimal phase incursions in a nondegenerate optical parametric oscillator (OPO) makes it possible to localise the extremes of intensity distributions of interacting waves on the output face of a nonlinear crystal, which provides maximum possible conversion efficiency of pump energy. The optimisation procedure in this case is rather flexible because it is reduced to ambiguous matching of the period and shift of the extremes of exact analytic solutions of the corresponding problem in the form of cnoidal waves with respect to the nonlinear crystal position. Unlike the single-cavity OPO scheme, both these parameters can substantially exceed the nonlinear crystal length and even tend to infinity, which corresponds to solitary soliton-like solutions. (optical parametric oscillators)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanoporous titania films produced by pulsed interference lithography

We describe a simple, inexpensive technique for producing deep nanopores on the surface of titania films using laser exposure in a four-beam interference configuration. In addition to producing nanopores, laser pulses convert amorphous titania films to a polycrystalline state. The effect of laser exposure on the TiO{sub 2} surface can be used to improve its biophotocatalytic properties, optimise solar cells, etc. (nanostructures)

36 MATERIALS SCIENCE↗

Laser-induced modification of transparent crystals and glasses

We analyse the processes taking place in transparent crystals and glasses irradiated by ultrashort laser pulses in the regimes typical of various applications in optoelectronics and photonics. We consider some phenomena, which have been previously described by the authors within the different model representations: charging of the dielectric surface due to electron photoemission resulting in a Coulomb explosion; crater shaping by using an adaptive control of the laser pulse shape; optimisation of the waveguide writing in materials strongly resistant to laser-induced compaction under ordinary irradiation conditions. The developed models and analysis of the processes relying on these models include the elements of the solid-state physics, plasma physics, thermodynamics, theory of elasticity and plasticity. Some important experimental observations which require explanations and adequate description are summarised. (photonics and nanotechnology)

36 MATERIALS SCIENCE↗

Laser nanostructuring of materials surfaces

This paper reviews results of experimental and theoretical studies of surface micro- and nanostructuring of metals and other materials irradiated directly by short and ultrashort laser pulses. Special attention is paid to direct laser action involving melting of the material (with or without ablation), followed by ultrarapid surface solidification, which is an effective approach to producing surface nanostructures. Theoretical analysis of recrystallisation kinetics after irradiation by ultrashort laser pulses makes it possible to determine the volume fraction of crystallised phase and the average size of forming crystalline structures as functions of laser treatment regime and thermodynamic properties of the material. The present results can be used to optimise pulsed laser treatment regime in order to ensure control nanostructuring of metal surfaces. (photonics and nanotechnology)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Regenerative amplification of picosecond 10-{mu}m pulses in a high-pressure optically pumped CO{sub 2} laser

A model is developed and numerical calculations are performed for the regenerative amplification of seed picosecond 10-{mu}m radiation pulses in a high-pressure optically pumped CO{sub 2} laser. It is established that by varying the cavity parameters, the conditions of efficient regenerative amplification may be optimised for the case of a relatively short-duration (50 ns) solid-state Cr:Er:YSGG laser and 'long-duration' (250 ns) electrodischarge chemical HF laser. It is shown that the schemes of a CO{sub 2} amplifier with optical pumping presented allow obtaining the pulses with the duration of 3ps, output energy of 1-5 mJ, and peak power of {approx}1 GW at the pump energy of 150-200 mJ. (lasers and amplifiers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of argon on the performance of a fast-axial flow CO{sub 2} laser

The performance characteristics of a fast-axial flow (FAF) cw CO{sub 2} laser are described. The dependences of the output power, efficiency, and discharge voltage on the discharge current of a FAF cw CO{sub 2} laser with optimised composition of the CO{sub 2}:N2:He=1:4.4:7.6 gas mixture with a small amount of argon are studied experimentally at two pressures of 50 and 60 mbar in open and closed cycle regimes of the laser system. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of K{sub {alpha}} radiation by high-efficiency laser targets

The intensity of K{sub {alpha}} radiation emanating from transversely limited thin laser targets with a periodic relief superposed onto its front side was calculated. The relief parameters and the geometrical target dimensions were optimised with the help of an analytic model. The optimal target was shown to possess a nearly 100% absorption coefficient for laser radiation and a high (up to 10{sup -3}) coefficient of laser radiation conversion to the X-ray K{sub {alpha}} radiation. (interaction of laser radiation with matter. laser plasma)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimal acceleration of ions by laser pulses with a sharp leading edge

We consider acceleration of ions through the interaction of a laser pulse with a sharp leading edge with nanofilms. At sufficiently large amplitude of the pulse, all the electrons can be expelled from the film, which provides an effective regime of ion acceleration. Limiting the maximum energy of ions can result from the longitudinal reverse motion of electrons to the initial position and by the transverse motion of electrons along the nanofilm surface, which causes the ion charge compensation. The characteristic parameters of the dynamics of ions and electrons in the system are analytically evaluated, which agree well with the results of twodimensional numerical simulations by the particle-in-cell method. Optimisation of the acceleration process by using the analytical estimates makes it possible to select the optimal parameters of the laser pulse and nanofilm. Numerical simulation of ion acceleration at these parameters shows that the maximum energy of ions can be substantially increased.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Aperiodic multilayer structures in soft X-ray radiation optics

We review the works related to the development of aperiodic multilayer structures - optical elements for the soft X-ray range. The potentialities of aperiodic multilayer mirrors as regards reflection of soft X-ray radiation in a broad wavelength range, first and foremost at normal radiation incidence, as well as the capabilities of broadband polariser mirrors are investigated. The results of multiparametric optimisation and experimental results for Mo/Si aperiodic mirrors ({lambda} {>=} 12.5 nm) as well as calculations for several promising material pairs (Pd/Y, Ag/Y, etc.) for {lambda} {<=} 12.5 nm are outlined. The effect of transition layers on the reflectivity is considered, in particular by taking into account the smooth variation of the permittivity near interfacial boundaries. The use of broadband mirrors in laser-plasma spectroscopic experiments is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Wideband and flat-gain amplifier based on high concentration erbium-doped fibres in parallel double-pass configuration

A wideband and flat gain erbium-doped fibre amplifier (EDFA) is demonstrated using a hybrid gain medium of a zirconiabased erbium-doped fibre (Zr-EDF) and a high concentration erbium-doped fibre (EDF). The amplifier has two stages comprising a 2-m-long ZEDF and 9-m-long EDF optimised for C- and L-band operations, respectively, in a double-pass parallel configuration. A chirp fibre Bragg grating (CFBG) is used in both stages to ensure double propagation of the signal and thus to increase the attainable gain in both C- and L-band regions. At an input signal power of 0 dBm, a flat gain of 15 dB is achieved with a gain variation of less than 0.5 dB within a wide wavelength range from 1530 to 1605 nm. The corresponding noise figure varies from 6.2 to 10.8 dB within this wavelength region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-performace cladding-pumped erbium-doped fibre laser and amplifier

We report cladding-pumped erbium-doped fibre laser and amplifier configurations. Through fibre design optimisation, we have achieved a record-high laser slope efficiency, 40 % with respect to absorbed pump power ({lambda} = 976 nm), and an output power of 7.5 W. The erbium-doped fibre amplifier efficiency reaches 32 %.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Blood group typing based on recording the elastic scattering of laser radiation using the method of digital imaging

The possibility is demonstrated to determine the human blood group by recording the scattering of laser radiation with the help of the digital imaging method. It is experimentally shown that the action of a standing ultrasound wave leads to acceleration of the agglutination reaction of red blood cells, to formation of larger immune complexes of red blood cells, and, as a consequence, to acceleration of their sedimentation. In the absence of agglutination of red blood cells the ultrasound does not enhance the relevant processes. This difference in the results of ultrasound action on the mixture of blood and serum allows a method of blood typing to be offered. Theoretical modelling of the technique of the practical blood typing, carried out on the basis of the elastic light scattering theory, agrees well with the experimental results, which made it possible to plan further improvement of the proposed method. The studies of specific features of sedimentation of red blood cells and their immune complexes were aimed at the optimisation of the sample preparation, i.e., at the search for such experimental conditions that provide the maximal resolution of the method and the device for registering the reaction of red blood cells agglutination. The results of the study may be used in designing the instrumentation for blood group assessment in humans.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Repetitively pulsed VUV emitter pumped by a barrier discharge in a mixture of helium with heavy water (D{sub 2}O) vapour

A gas-discharge lamp based on a barrier discharge in a He - D{sub 2}O mixture at partial pressures p{sub D2O} = 0.04 - 0.33 kPa and p{sub He} = 10 - 60 kPa is studied. The emission spectrum of the discharge plasma contains mainly the A {yields} X and C {yields} X bands of OD hydroxyl ({lambda} = 144 - 160 nm). The intensities of these bands are optimised by varying the pressure and composition of working mixtures. (laser applications and other topics in quantum electronics)

74 ATOMIC AND MOLECULAR PHYSICS↗

Formation of an optical pulsed discharge in a supersonic air flow by radiation of a repetitively pulsed CO{sub 2} laser

Results of optimisation of repetitively pulsed CO{sub 2}-laser generation are presented for finding physical conditions of forming stable burning of an optical pulsed discharge (OPD) in a supersonic air flow and for studying the influence of pulse parameters on the energy absorption efficiency of laser radiation in plasma. The optical discharge in a supersonic air flow was formed by radiation of a repetitively pulsed CO{sub 2} laser with mechanical Q-switching excited by a discharge with a convective cooling of the working gas. For the first time the influence of radiation pulse parameters on the ignition conditions and stable burning of the OPD in a supersonic air flow was investigated and the efficiency of laser radiation absorption in plasma was studied. The influence of the air flow velocity on stability of plasma production was investigated. It was shown that stable burning of the OPD in a supersonic flow is realised at a high pulse repetition rate where the interval between radiation pulses is shorter than the time of plasma blowing-off. Study of the instantaneous value of the absorption coefficient shows that after a breakdown in a time lapse of 100 - 150 ns, a quasi-stationary 'absorption phase' is formed with the duration of {approx}1.5 ms, which exists independently of air flow and radiation pulse repetition rate. This phase of strong absorption is, seemingly, related to evolution of the ionisation wave. (laser applications and other topics in quantum electronics)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cascade amplification of self-similar frequency-modulated pulses in normal group velocity dispersion active fibres

This paper examines the possibility of efficient amplification of self-similar frequency-modulated wave packets in longitudinally inhomogeneous active fibres. We analyse the dynamics of parabolic pulses with a constant frequency modulation rate and derive algorithms for optimising the group velocity dispersion profile in order to ensure self-similar propagation of such pulses. We demonstrate that the use of a cascade scheme can ensure efficient amplification of individual subpicosecond pulses of this type. (optical fibres, lasers and amplifiers. properties and applications)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Active-region designs in quantum cascade lasers

This paper analyses the development of active-region designs in quantum cascade lasers. Active-region designs have been demonstrated to date that employ various radiative transitions (vertical, diagonal, interminiband and interband). The lower laser level is depopulated through nonradiative transitions, such as one- or two-phonon (and even three-phonon) relaxation or bound state {yields} continuum transitions. Advances in active-region designs and energy diagram optimisation in the past few years have led to significant improvements in important characteristics of quantum cascade lasers, such as their output power, emission bandwidth, characteristic temperature and efficiency. (invited paper)

47 OTHER INSTRUMENTATION↗

Features of the electronic spectrum in a type-I core - shell quantum dot

The model is proposed, which allows one to solve the problem of finding the energy spectrum and the wave function of an electron in a type-I core - shell quantum dot. It is shown that the size of the core and shell can serve as control parameters for the optimisation of the energy structure of the quantum dot in order to obtain the real structures with desired electrophysical and optical properties. (quantum dots)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Linewidth-tunable laser diode array for rubidium laser pumping

To optimise the pump source for a high-power diodepumped rubidium vapour laser, we have designed a laser diode array (LDA) with a narrowed and tunable linewidth and an external cavity formed by two volume Bragg gratings (VBGs). Through controlling the temperature differences between the two VBGs, the LDA linewidth, which was 1.8 nm before mounting the two VBGs, was tunable from 100 pm to 0.2 nm, while the output power changed by no more than 4 %. By changing simultaneously the temperature in both VBGs, the centre wavelength in air of the linewidth-tunable LDA was tunable from 779.40 nm to 780.05 nm. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗