Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallel methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

SU-F-SPS-09: Parallel MC Kernel Calculations for VMAT Plan Improvement

Purpose: Adding kernels (small perturbations in leaf positions) to the existing apertures of VMAT control points may improve plan quality. We investigate the calculation of kernel doses using a parallelized Monte Carlo (MC) method. Methods: A clinical prostate VMAT DICOM plan was exported from Eclipse. An arbitrary control point and leaf were chosen, and a modified MLC file was created, corresponding to the leaf position offset by 0.5cm. The additional dose produced by this 0.5 cm × 0.5 cm kernel was calculated using the DOSXYZnrc component module of BEAMnrc. A range of particle history counts were run (varying from 3 × 10{sup 6} to 3 × 10{sup 7}); each job was split among 1, 10, or 100 parallel processes. A particle count of 3 × 10{sup 6} was established as the lower range because it provided the minimal accuracy level. Results: As expected, an increase in particle counts linearly increases run time. For the lowest particle count, the time varied from 30 hours for the single-processor run, to 0.30 hours for the 100-processor run. Conclusion: Parallel processing of MC calculations in the EGS framework significantly decreases time necessary for each kernel dose calculation. Particle counts lower than 1 × 10{sup 6} have too large of an error to output accurate dose for a Monte Carlo kernel calculation. Future work will investigate increasing the number of parallel processes and optimizing run times for multiple kernel calculations.

60 APPLIED LIFE SCIENCES↗
NASA NTRS2003

Parallel Subconvolution Filtering Architectures

These architectures are based on methods of vector processing and the discrete-Fourier-transform/inverse-discrete- Fourier-transform (DFT-IDFT) overlap-and-save method, combined with time-block separation of digital filters into frequency-domain subfilters implemented by use of sub-convolutions. The parallel-processing method implemented in these architectures enables the use of relatively small DFT-IDFT pairs, while filter tap lengths are theoretically unlimited. The size of a DFT-IDFT pair is determined by the desired reduction in processing rate, rather than on the order of the filter that one seeks to implement. The emphasis in this report is on those aspects of the underlying theory and design rules that promote computational efficiency, parallel processing at reduced data rates, and simplification of the designs of very-large-scale integrated (VLSI) circuits needed to implement high-order filters and correlators.

Gray, Andrew A.↗
NASA NTRS1990

Parallelization of implicit finite difference schemes in computational fluid dynamics

Implicit finite difference schemes are often the preferred numerical schemes in computational fluid dynamics, requiring less stringent stability bounds than the explicit schemes. Each iteration in an implicit scheme involves global data dependencies in the form of second and higher order recurrences. Efficient parallel implementations of such iterative methods are considerably more difficult and non-intuitive. The parallelization of the implicit schemes that are used for solving the Euler and the thin layer Navier-Stokes equations and that require inversions of large linear systems in the form of block tri-diagonal and/or block penta-diagonal matrices is discussed. Three-dimensional cases are emphasized and schemes that minimize the total execution time are presented. Partitioning and scheduling schemes for alleviating the effects of the global data dependencies are described. An analysis of the communication and the computation aspects of these methods is presented. The effect of the boundary conditions on the parallel schemes is also discussed.

Decker, Naomi H.↗
NASA NTRS1994

Heat flux instrumentation for Hyflite thermal protection system

Using Thermal Protection Tile core samples supplied by NASA, the surface characteristics of the FRCI, TUFI, and RCG coatings were evaluated. Based on these results, appropriate methods of surface preparation were determined and tested for the required sputtering processes. Sample sensors were fabricated on the RCG coating and adhesion was acceptable. Based on these encouraging results, complete Heat Flux Microsensors were fabricated on the RCG coating. The issue of lead attachment was addressed with the annnealing and welding methods developed at NASA Lewis. Parallel gap welding appears to be the best method of lead attachment with prior heat treatment of the sputtered pads. Sample Heat Flux Microsensors were submitted for testing in the NASA Ames arc jet facility. Details of the project are contained in two attached reports. One additional item of interest is contained in the attached AIAA paper, which gives details of the transient response of a Heat Flux Microsensors in a shock tube facility at Virginia Tech. The response of the heat flux sensor was measured to be faster than 10 micro-s.

Diller, T. E.↗
DOE OSTI2014

Parareal in time 3D numerical solver for the LWR Benchmark neutron diffusion transient model

In this paper we present a time-parallel algorithm for the 3D neutrons calculation of a transient model in a nuclear reactor core. The neutrons calculation consists in numerically solving the time dependent diffusion approximation equation, which is a simplified transport equation. The numerical resolution is done with finite elements method based on a tetrahedral meshing of the computational domain, representing the reactor core, and time discretization is achieved using a θ-scheme. The transient model presents moving control rods during the time of the reaction. Therefore, cross-sections (piecewise constants) are taken into account by interpolations with respect to the velocity of the control rods. The parallelism across the time is achieved by an adequate use of the parareal in time algorithm to the handled problem. This parallel method is a predictor corrector scheme that iteratively combines the use of two kinds of numerical propagators, one coarse and one fine. Our method is made efficient by means of a coarse solver defined with large time step and fixed position control rods model, while the fine propagator is assumed to be a high order numerical approximation of the full model. The parallel implementation of our method provides a good scalability of the algorithm. Numerical results show the efficiency of the parareal method on large light water reactor transient model corresponding to the Langenbuch–Maurer–Werner benchmark.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1990

Parallel computation using boundary elements in solid mechanics

The inherent parallelism of the boundary element method is shown. The boundary element is formulated by assuming the linear variation of displacements and tractions within a line element. Moreover, MACSYMA symbolic program is employed to obtain the analytical results for influence coefficients. Three computational components are parallelized in this method to show the speedup and efficiency in computation. The global coefficient matrix is first formed concurrently. Then, the parallel Gaussian elimination solution scheme is applied to solve the resulting system of equations. Finally, and more importantly, the domain solutions of a given boundary value problem are calculated simultaneously. The linear speedups and high efficiencies are shown for solving a demonstrated problem on Sequent Symmetry S81 parallel computing system.

Chien, L. S.↗
DOE OSTI2016

Challenges of Monte Carlo Transport

These are slides from a presentation for Parallel Summer School at Los Alamos National Laboratory. Solving discretized partial differential equations (PDEs) of interest can require a large number of computations. We can identify concurrency to allow parallel solution of discrete PDEs. Simulated particles histories can be used to solve the Boltzmann transport equation. Particle histories are independent in neutral particle transport, making them amenable to parallel computation. Physical parameters and method type determine the data dependencies of particle histories. Data requirements shape parallel algorithms for Monte Carlo. Then, Parallel Computational Physics and Parallel Monte Carlo are discussed and, finally, the results are given. The mesh passing method greatly simplifies the IMC implementation and allows simple load-balancing. Using MPI windows and passive, one-sided RMA further simplifies the implementation by removing target synchronization. The author is very interested in implementations of PGAS that may allow further optimization for one-sided, read-only memory access (e.g. Open SHMEM). The MPICH_RMA_OVER_DMAPP option and library is required to make one-sided messaging scale on Trinitite - Moonlight scales poorly. Interconnect specific libraries or functions are likely necessary to ensure performance. BRANSON has been used to directly compare the current standard method to a proposed method on idealized problems. The mesh passing algorithm performs well on problems that are designed to show the scalability of the particle passing method. BRANSON can now run load-imbalanced, dynamic problems. Potential avenues of improvement in the mesh passing algorithm will be implemented and explored. A suite of test problems that stress DD methods will elucidate a possible path forward for production codes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1989

Spectral element simulations of laminar and turbulent flows in complex geometries

Spectral element methods are high-order weighted residual techniques based on spectral expansions of variables and geometry for the Navier-Stokes (NS) and transport equations. Here, practical aspects of these methods and their efficient implementation are examined, and several examples of flows in truly complex geometries are presented. The spectral element discretization for NS equations is introduced, and the convergence of the method is addressed. An efficient data management scheme is discussed in the context of parallel processing computations. The method is validated by comparing the spectral element solutions with the exact eigensolutions for the Orr-Sommerfeld equations in two and three dimensions. Computer-aided flow visualizations are presented for an impulsive flow past a sharp edge wedge. Three-dimensional states of channel flow disrupted by an array of cylindrical eddy promoters are studied, and the results of a direct simulation of the turbulent flow in a plane channel are presented.

Karniadakis, George EM↗
DOE OSTI2018

ANALYSIS OF COMMUNICATION PERFORMANCE DEGRADATION OF THE RADIATION TRANSPORT CODE PIDOTS ON HIGH-UTILIZATION, MULTI-USER HPC SYSTEMS

The PIDOTS radiation transport code implements a spatially decomposed Integral Transport Matrix Method (ITMM) solver, which is intended to fully utilize the capabilities of modern, massively parallel high-performance computing (HPC) systems. While the code shows promising results, there was also an unexpected loss of parallel efficiency on the test systems as the number of participating processors grew and the parallelization grain size got finer. We seek to identify and characterize the communication-latency based effects that contribute to this slowdown. Through the creation of a high-level, parameterized representation of the workload of the code, the communication methodology was identified as the likely reason. From there, low-level, InfiniBand communication performance data measured on the Falcon HPC at Idaho National Laboratory (INL) was used to produce a discrete-event model of the communication scheme. The data, as well as the model, show that infrequent, large spikes in send/receive latency drive an unexpectedly substantial increase in projected runtime of a code. Furthermore, these effects are more pronounced under the high-utilization, scattered-workload environment of Falcon. Based on results from the model, it can be shown that a high-communication volume, small message-size regime can easily lead to slowdowns of ~5-10x, when compared to ideal results, as the processor count increases.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2015

Iterative stability analysis of spatial domain decomposition based on block Jacobi algorithm for the diamond-difference scheme

Here, we study convergence of the integral transport matrix method (ITMM) based on a parallel block Jacobi (PBJ) iterative strategy for solving particle transport problems. The ITMM is a spatial domain decomposition method proposed for massively parallel computations. AFourier analysis of the PBJ-based iterations applied to SN diamond-difference equations in 1D slab and 2D Cartesian geometries is performed. It is carried out for infinite-medium problems with homogeneous material properties. To analyze the performance of the ITMM with the PBJ algorithm and evaluate its potential in scalability we consider a limiting case of one spatial cell per subdomain. The analysis shows that in such limit the spectral radius of the iteration method is one without regard to values of the scattering ratio and optical thickness of the spatial cells. This implies lack of convergence in infinite medium. Numerical results of finite-medium problems are presented. They demonstrate effects of finite size of spatial domain on the performance of the iteration algorithm as well as its asymptotic behavior when the extent of the spatial domain increases. Finally, these numerical experiments also show that for finite domains iterative convergence to a finite criterion is achievable in a multiple of the sum of number of cells in each dimension.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Local time stepping for the shallow water equations in MPAS

In this work we assess the performance of a set of local time-stepping (LTS) schemes for the shallow water equations implemented in the Model for Prediction Across Scales (MPAS). The goal of LTS is to speed up the simulation by allowing different time-steps on different regions of the computational grid. The LTS schemes considered here were originally introduced by Hoang et al. (2019) [26], who laid out the mathematical foundation of the methods. Here, the authors take on the task of presenting a fast, efficient and scalable parallel implementation of these LTS methods on high performance computing machines, with the aim to provide a recipe for other climate modeling groups that may be interested in employing LTS algorithms in their codes. As a matter of fact, even if MPAS is our framework of choice, our approach is general enough and could be of interest to other groups beyond the MPAS community. Due to their nature, LTS methods possess an inherent load imbalance that needs to be carefully addressed in order to obtain efficient scalability. Even more important is the far from trivial task of computing the right-hand side terms only on specific LTS regions during the time-stepping procedure. An inefficient handling of this task causes a drastic decay of the CPU time performance, making the LTS algorithms practically of no use. The emphasis of the present work is therefore on the computational and parallel aspects of the LTS methods, whose proper treatment is crucial to make the methods run faster against existing strategies, such as for instance high-order explicit global time-stepping schemes. This is in fact the ultimate goal of using an LTS procedure and it is the one to which we direct all our optimization efforts.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1993

Implicit transient finite element structural computations on MIMD systems - FETI vs. direct solvers

A domain decomposition method for implicit schemes that require significantly less storage and is several times faster than factorization algorithms is proposed. The transient domain decomposition method is an extension of the finite element tearing and interconnecting (FETI) method for the solution of static problems. Serial and parallel performance results obtained using the CRAY Y-MP/8 and the iPSC-860/128 systems demonstrate that the FETI method is superior to both serial and parallel direct methods.

Crivelli, Luis↗
NASA NTRS1993

The development of a scalable parallel 3-D CFD algorithm for turbomachinery

Two algorithms capable of computing a transonic 3-D inviscid flow field about rotating machines are considered for parallel implementation. During the study of these algorithms, a significant new method of measuring the performance of parallel algorithms is developed. The theory that supports this new method creates an empirical definition of scalable parallel algorithms that is used to produce quantifiable evidence that a scalable parallel application was developed. The implementation of the parallel application and an automated domain decomposition tool are also discussed.

Luke, Edward Allen↗
DOE OSTI2016

Pin-by-Pin Core Calculation with an NEM-Based Two-Level Hybrid CMFD Algorithm

In the near future, systematic pin-by-pin core calculations are expected to provide a high level of accuracy. These are being developed in pursuit of high-fidelity tools for analyzing the reactor configurations. One such tool that has recently gained significant attention is the pin-by-pin core calculation via local-global iteration using nonlinear acceleration scheme, such as the One-Node CMFD (Coarse-Mesh Finite Difference) nonlinear algorithm. The One-Node CMFD method uses two correction factors to preserve the interface current, in contrast to the one correction term employed by conventional nonlinear iterative methods such as that proposed by Kord. S. Smith. These correction factors are updated with surface flux and net current which are obtained from a high order local problem. With two correction factors, One-Node CMFD can reduce computing time of local FMFD (Fine-Mesh Finite Difference) as it nonlinearly couples the CMFD and FMFD methods in global-local iterations. Nonetheless, very small mesh size is still required and it consequently requires long computing time for high accuracy. As such, a more flexible approach is needed to address this challenge. This paper presents one such possible approach named the hCMFD (Hybrid CMFD) method. In this method, One-Node CMFD is used to solve the global problem, while Two-Node NEM (Nodal Expansion Method) CMFD replaces FMFD as the solver for the local problem. In this paper, two kinds of CMFD methods has been simultaneously implemented for a global-local nonlinear iteration in order to do pin-by-pin heterogeneous reactor calculations. The global problem is solved by a one-node CMFD which uses two correction factors, while the local fixed-source problem is solved by the conventional two-node NEM CMFD which use one correction factor on a surface. From solution of the global eigenvalue problem, incoming partial current is obtained and it is used as boundary condition of the local fixed-source problems. It has been shown that over 99% of the whole calculations can be done in parallel with the new CMFD method for 2-D problems and the algorithm can be easily parallelized by using the OpenMP parallel scheme. The hCMFD method will enable an efficient pin-by-pin reactor analysis since a very efficient parallel calculation is possible with the hCMFD method. In future works, the hCMFD method will be extended to three-dimensional reactor problem. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

aphBO-2GP-3B: a budgeted asynchronous parallel multi-acquisition functions for constrained Bayesian optimization on high-performing computing architecture

High-fidelity complex engineering simulations are often predictive, but also computationally expensive and often require substantial computational efforts. The mitigation of computational burden is usually enabled through parallelism in high-performance cluster (HPC) architecture. Optimization problems associated with these applications is a challenging problem due to the high computational cost of the high-fidelity simulations. In this paper, an asynchronous parallel constrained Bayesian optimization method is proposed to efficiently solve the computationally expensive simulation-based optimization problems on the HPC platform, with a budgeted computational resource, where the maximum number of simulations is a constant. The advantage of this method are three-fold. Firstly, the efficiency of the Bayesian optimization is improved, where multiple input locations are evaluated parallel in an asynchronous manner to accelerate the optimization convergence with respect to physical runtime. This efficiency feature is further improved so that when each of the inputs is finished, another input is queried without waiting for the whole batch to complete. Second, the proposed method can handle both known and unknown constraints. Third, the proposed method samples several acquisition functions based on their rewards using a modified GP-Hedge scheme. The proposed framework is termed aphBO-2GP-3B, which means asynchronous parallel hedge Bayesian optimization with two Gaussian processes and three batches. The numerical performance of the proposed framework aphBO-2GP-3B is comprehensively benchmarked using 16 numerical examples, compared against other 6 parallel Bayesian optimization variants and 1 parallel Monte Carlo as a baseline, and demonstrated using two real-world high-fidelity expensive industrial applications. The first engineering application is based on finite element analysis (FEA) and the second one is based on computational fluid dynamics (CFD) simulations.

97 MATHEMATICS AND COMPUTING↗