Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanning electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Highly efficient visible-light-induced photocatalytic activity of Bi{sub 2}WO{sub 6}/BiVO{sub 4} heterojunction photocatalysts

Highlights: • Bi{sub 2}WO{sub 6}/BiVO{sub 4} heterojunction photocatalysts were obtained using hydrothermal method. • Physicochemical properties played a significant role on photocatalytic efficiency. • Bi{sub 2}WO{sub 6}/BiVO{sub 4} heterogeneous structures were greatly enhanced for degradation of MB. • A tentative mechanism of charge transfer process in MB degradation was proposed. - Abstract: The Bi{sub 2}WO{sub 6}/BiVO{sub 4} heterojunction photocatalysts were synthesized by hydrothermal method. Physical properties of the heterojunction photocatalyst samples were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. The XRD results indicated that BiVO{sub 4} retain monoclinic and tetragonal structures, while Bi{sub 2}WO{sub 6} presented as orthorhombic structure. The Brunauer, Emmett and Teller (BET) adsorption–desorption of nitrogen gas for specific surface area determination at the temperature of liquid nitrogen was performed on all samples. UV–vis diffuse reflectance spectra (UV–vis DRS) were used to identify the absorption range and band gap energy of the heterojunction photocatalysts. The photocatalytic performance of Bi{sub 2}WO{sub 6}/BiVO{sub 4} heterojunction photocatalysts was studied via the photodegradation of methylene blue (MB) under visible light irradiation. The results indicated that the heterojunction photocatalyst at 0.5:0.5 mole ratio of Bi{sub 2}WO{sub 6}:BiVO{sub 4} shows the highest photocatalytic activity.

36 MATERIALS SCIENCE↗

Crystal structure and dielectric properties of xCa(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}–(1 − x)(Ca{sub 0.61}Nd{sub 0.26})TiO{sub 3} at the microwave frequency

Highlights: • The 0.6Ca(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}–0.4Ca{sub 0.61}Nd{sub 0.26}TiO{sub 3} system is thus proposed for use in microwave devices. • The XRD patterns indicate that the xCMN–(1 − x)CNT ceramic system had a complex perovskite structure. • The τ{sub f} value could be adjusted to near zero. - Abstract: The microwave dielectric properties of the xCa(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}–(1 − x)Ca{sub 0.61}Nd{sub 0.26}TiO{sub 3} ceramic system (x = 0.2, 0.4, 0.6, and 0.8) were investigated. The crystal structures and the microstructures of the ceramics were characterized using X-ray diffraction and scanning electron microscopy analyses, respectively. A near-zero temperature coefficient of resonant frequency was achieved by adjusting the x value of the system. When the x value was increased from 0.2 to 0.8, the dielectric constant ϵ{sub r} decreased from 83 to 34, the quality factor value (Q × f) increased from 13,000 to 45,000 GHz, and the temperature coefficient of resonant frequency (τ{sub r}) decreased from 85 to −21 ppm/°C. The 0.6Ca(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}–0.4Ca{sub 0.61}Nd{sub 0.26}TiO{sub 3} ceramic system is suitable for microwave dielectric resonator applications, as it has an ϵ{sub r} value of ∼47, a Q × f value of ∼37,000 GHz, and a τ{sub r} value of ∼5 ppm/°C.

36 MATERIALS SCIENCE↗

Non-enzymatic hydrogen peroxide biosensor based on rose-shaped FeMoO{sub 4} nanostructures produced by convenient microwave-hydrothermal method

Graphical abstract: A non-enzymatic H{sub 2}O{sub 2} sensor with high selectivity and sensitivity based on rose-shaped FeMoO{sub 4} synthesized by the convenient microwave-assisted hydrothermal method, was fabricated. - Highlights: • Rose-shaped FeMoO{sub 4} is synthesized within 10 min via microwave-assisted hydrothermal approach. • Non-enzymatic hydrogen peroxide biosensor based on FeMoO{sub 4} nanomaterials is fabricated. • The biosensor exhibits good performance. - Abstract: In this work, we demonstrated a simple, rapid and reliable microwave-assisted hydrothermal approach to synthesize the uniform rose-shaped FeMoO{sub 4} within 10 min. The morphologies of the synthesized materials were characterized by X-ray powder diffraction and scanning electron microscopy. Moreover, a non-enzymatic amperometric sensor for the detection of hydrogen peroxide (H{sub 2}O{sub 2}) was fabricated on the basis of the FeMoO{sub 4} as electrocatalysis. The resulting FeMoO{sub 4} exhibited high sensitivity and good stability for the detection of H{sub 2}O{sub 2}, which may be attributed to the rose-shaped structure of the material and the catalytic property of FeMoO{sub 4}. Amperometric response showed that the modified electrode had a good response for H{sub 2}O{sub 2} with a linear range from 1 μM to 1.6 mM, a detection limit of 0.5 μM (S/N = 3), high selectivity and short response time. Additionally, good recoveries of analytes in real milk samples confirm the reliability of the prepared sensor in practical applications.

36 MATERIALS SCIENCE↗

Influence of nitrogen background pressure on structure of niobium nitride films grown by pulsed laser deposition

Depositions of niobium nitride thin films on Nb using pulsed laser deposition (PLD) with different nitrogen background pressures (10.7 to 66.7 Pa) have been performed. The effect of nitrogen pressure on NbN formation in this process was examined. The deposited films were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), atomic force microscope (AFM), and energy dispersive X-ray (EDX) analysis. Hexagonal {beta}-Nb{sub 2}N and cubic {delta}-NbN phases resulted when growth was performed in low nitrogen background pressures. With an increase in nitrogen pressure, NbN films grew in single hexagonal {beta}-Nb{sub 2}N phase. The formation of the hexagonal texture during the film growth was studied. The c/a ratio of the hexagonal {beta}-Nb{sub 2}N unit cell parameter increases with increasing nitrogen pressure. Furthermore, the N:Nb ratio has a strong influence on the lattice parameter of the {delta}-NbN, where the highest value was achieved for this ratio was 1.19. It was found that increasing nitrogen background pressure leads to change in the phase structure of the NbN film. With increasing nitrogen pressure, the film structure changes from hexagonal to a mixed phase and then back to a hexagonal phase.

36 MATERIALS SCIENCE↗

Effects of K doping on structural and superconducting properties of Bi{sub 1.5}Pb{sub 0.5}Sr{sub 1.8}CaCu{sub 2}O{sub 8+δ} compounds

Two kinds of potassium doped Bi(Pb)2212 samples are used to investigate the effect of doping the Bi(Pb)2212 ((Bi,Pb){sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8}) phase by potassium (K): In the first one K is substituted on the Sr site; In the second one K is added. Using the solid state method reaction samples of Bi{sub 1.5}Pb{sub 0.5}(Sr{sub 1.8−x}K{sub x})CaCu{sub 2}O{sub 8+d} and Bi{sub 1.5}Pb{sub 0.5}Sr{sub 1.8}CaCu{sub 2}O{sub 8+d}K{sub x} (0 ≤ x≤ 0.05) have been prepared from powders of carbonates and primary oxides having purity over 99%. The samples have been characterized by X ray diffraction (XRD), scanning electron microscopy (SEM) and resistivity versus temperature measurements. Results show how the kind and the rate of doping by potassium affects the structural and transport properties of Bi(Pb)2212 phase.

36 MATERIALS SCIENCE↗

Solid state amorphization in the Al-Fe binary system during high energy milling

In the present study, mechanical alloying (MA) of Al75Fe25 elemental powders mixture was carried out in argon atmosphere, using a high energy attritor ball mill. The microstructure of the milled products at different stages of milling was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The results showed that the amorphous phase content increased by increasing the milling time, and after 50 hours the amorphization process became complete. Heating the samples resulted in the crystallization of the synthesized amorphous alloys and the appearance of the equilibrium intermetallic compounds Al{sub 5}Fe{sub 2}.

36 MATERIALS SCIENCE↗

The formation of iron aluminides on aluminum surface by using a Q-switched Nd:YAG laser

The formation and growth of Fe based aluminum diffusion layers at the Fe-Al interface have been investigated to improve the surface hardness. The diffusion of Fe into Al has been accomplished by focusing a Q-switched Nd:YAG laser on the modified surface. The variety of the layer depth is achieved based on the type of heating and quenching media. Microstructural characterization and mechanical properties of the modified surface were carried out via gas discharge spectrometer GDS, X-Ray diffraction (XRD), Scanning electron microscope (SEM), and Vickers Hardness tester. The results indicate that hardness at the interface of Fe-Al layer is increased. The optimum hardness achieved as 93 HV at corresponding critical energy density of 438 Jcm{sup −2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Femtosecond laser-induced phase transformations in amorphous Cu{sub 77}Ni{sub 6}Sn{sub 10}P{sub 7} alloy

In this study, the femtosecond laser-induced crystallization of CuNiSnP amorphous ribbons was investigated by utilizing an amplified Ti:sapphire laser system. X-ray diffraction and scanning electronic microscope were applied to examine the phase and morphology changes of the amorphous ribbons. Micromachining without crystallization, surface patterning, and selective crystallization were successfully achieved by changing laser parameters. Obvious crystallization occurred under the condition that the laser fluence was smaller than the ablation threshold, indicating that the structural evolution of the material depends strongly on the laser parameters. Back cooling method was used to inhibit heat accumulation; a reversible transformation between the disordered amorphous and crystalline phases can be achieved by using this method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single step synthesis of nanostructured boron nitride for boron neutron capture therapy

Nanostructured Boron Nitride (BN) has been successfully synthesized by carbo-thermic reduction of Boric Acid (H{sub 3}BO{sub 3}). This method is a relatively low temperature synthesis route and it can be used for large scale production of nanostructured BN. The synthesized nanoparticles have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and differential thermal analyzer (DTA). XRD analysis confirmed the formation of single phase nanostructured Boron Nitride. SEM analysis showed that the particles are spherical in shape. DTA analysis showed that the phase is stable upto 900 °C and the material can be used for high temperature applications as well boron neutron capture therapy (BNCT)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, characterization, photocatalytic activity and ethanol-sensing properties of In{sub 2}O{sub 3} and Eu{sup 3+}:In{sub 2}O{sub 3} nanoparticles

In the present endeavor, Indium oxide (In{sub 2}O{sub 3}) and Europium doped In{sub 2}O{sub 3} (In{sub 2}O{sub 3}:0.5%Eu{sup 3+} and In{sub 2}O{sub 3}:5%Eu{sup 3+}) nanoparticles were prepared by co-precipitation method. Synthesized nanoparticles were characterized using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and UV-Visible spectrophotometry (UV-vis). XRD revealed that nanoparticles were of pure bixbyite-type cubic phase and the crystallite size decreased with the Eu{sup 3+} doping. SEM micrographs showed that particles were spherical in shape. Synthesized nanoparticles were used for photo degradation of methylene blue (MB) dye under sunlight and the results clearly showed that In{sub 2}O{sub 3}:5%Eu{sup 3+} nanoparticles exhibited higher activity than pure In{sub 2}O{sub 3} nanoparticles. For gas sensing characteristics, the nanoparticles were applied as thick film onto alumina substrate and tested at different operating temperatures. The results showed that the optimum operating temperature of the gas sensors prepared from synthesized nanoparticles is 300°C. The investigations revealed that the addition of Eu{sup 3+} as a dopant enhanced the sensing response of In{sub 2}O{sub 3} nanoparticles appreciably.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure and magnetic properties of MFe{sub 2}O{sub 4} (M = Co, Ni, and Mn) ferrite nanocrystals prepared using colloid mill and hydrothermal method

Three kinds of spinel ferrite nanocrystals, MFe{sub 2}O{sub 4} (M = Co, Ni, and Mn), are synthesized using colloid mill and hydrothermal method. During the synthesis process, a rapid mixing and reduction of cations with sodium borohydride (NaBH{sub 4}) take place in a colloid mill then through a hydrothermal reaction, a slow oxidation and structural transformation of the spinel ferrite nanocrystals occur. The phase purity and crystal lattice parameters are estimated by X-ray diffraction studies. Scanning electron microscopy and transmission electron microscopy images show the morphology and particle size of the as-synthesized ferrite nanocrystals. Raman spectrum reveals active phonon modes at room temperature, and a shifting of the modes implies cation redistribution in the tetrahedral and octahedral sites. Magnetic measurements show that all the obtained samples exhibit higher saturation magnetization (M{sub s}). Meanwhile, experiments demonstrate that the hydrothermal reaction time has significant effects on microstructure, morphologies, and magnetic properties of the as-synthesized ferrite nanocrystals.

36 MATERIALS SCIENCE↗

Synthesis and characterization of CuO nano particles using precipitation method

A simple and efficient synthesis of CuO nanoparticles was carried out by precipitation method using copper metal chips as precursor and sodium hydroxide as a stabilizing agent at different calcinations temperatures (100°C, 150°C, and 175°C). The products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier Transform Infrared Spectroscopy (FTIR). XRD indicated monoclinic structure of CuO. SEM indicated the variation in nanostructures with the heating temperatures and FTIR inidcated Cu-O stretching frequencies. The CuO nanostructures with the average particle size of about 16.52 nm were prepared at 100°C for 3 hr. When the calcinations temperature was increased to 150°C and 175°C, CuO nanostructures with the particle size of about 17.41 nm, and 18.44 nm were obtained respectively. This aqueous precipitation method can give a large scale production of CuO nanoparticles easily.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of a novel load-bearing trabecular Nitinol scaffold on rabbit radius bone regeneration

The research aim was to evaluate the bone regeneration capability of novel load-bearing NiTi alloy (Nitinol) scaffolds in a critical-size defect (CSD) model. High strength “trabecular Nitinol” scaffolds were prepared by PIRAC (Powder Immersion Reaction Assisted Coating) annealing of the highly porous Ni foam in Ti powder at 900°C. This was followed by PIRAC nitriding to mitigate the release of potentially toxic Ni ions. Scaffolds phase composition and microstructure were characterized by X-ray diffraction and scanning electron microscopy (SEM/EDS), and their mechanical properties were tested in compression. New Zealand white rabbits received bone defect in right radius and were divided in four groups randomly. In the control group, nothing was placed in the defect. In other groups, NiTi scaffolds were implanted in the defect: (i) as produced, (ii) loaded with bone marrow aspirate (BMA), and (iii) biomimetically CaP-coated. The animals were sacrificed after 12 weeks. The forelimbs with scaffolds were resected, fixed, sectioned and examined in SEM. New bone formation inside the scaffold was studied by EDS analysis and by the processing of backscattered electron images. Bone ingrowth into the scaffold was observed in all implant groups, mostly next to the ulna. New bone formation was strongly enhanced by BMA loading and biomimeatic CaP coating, the bone penetrating as much as 1–1.5 mm into the scaffold. The results of this preliminary study demonstrate that the newly developed high strength trabecular Nitinol scaffolds can be successfully used for bone regeneration in critical size defects.

36 MATERIALS SCIENCE↗

Effect of reaction atmosphere on structural and optical properties of hexagonal molybdenum oxide (h-MoO{sub 3})

The present work aims to synthesize single phase h-MoO{sub 3} nanocrytals by chemical precipitation method exposed under different reaction atmospheres. The reaction atmosphere have been successfully tuned as air, nitrogen and argon and studied its effects on structural, functional, morphology and optical properties by using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and diffuse reflectance spectroscopy (DRS) measurements. The XRD result indicates that the sample exhibits characteristic hexagonal phase of MoO{sub 3}. The crystallite size is estimated by well known Scherrer’s method. The crystallite size is relative small in the case of sample prepared at argon atmosphere. The functional groups such as Mo-O, N-H and O-H are identified from FT-IR spectroscopy. The particle exhibits rod like morphology with perfect hexagonal cross-section. The optical absorption observed at 420-450 nm corresponds to fundamental optical absorption by h-MoO{sub 3}. The band gap values are estimated using Kublka-Munk (K-M) function and found to be 2. 87 eV, 2.93 eV and 2.97 eV for samples synthesized under air, nitrogen and argon, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ XAS study of the local structure of the nano-Li 2 FeSiO 4 /C cathode

Despite the challenges in achieving its full theoretical capacity of reversible extraction of two Li ions, the Li 2 FeSiO 4 (LFS) cathode shows a remarkable cycling stability once its low electronic conductivity is addressed. By studying the local structure around the iron during electrochemical cycling using in situ x-ray absorption spectroscopy (XAS), it is possible to gain insight into the factors which determine the electrochemical properties of this material. In order to practically perform in situ XAS studies, the charge/discharge of LFS was maximized using two approaches: (a) reducing the particle size of LFS samples from micro-scale to nano-scale in order to reduce the diffusion path for intercalating ions; and (b) applying a conductive coating to each nanoparticle to facilitate electron transfer. A family of LFS materials was synthesized and characterized using x-ray diffraction, and scanning electron microscopy with energy dispersive analysis for structural and morphological analysis, as well as cyclic voltammetry and cycling tests for electrochemical performance diagnosis. This material was then characterized by in situ XAS. The results provide insight into the stable electrochemical performance of LFS and suggest new synthetic routes to reaching the theoretical capacity.

25 ENERGY STORAGE↗

Effect of the Oxygen Content on the Local Environment of Fe Atoms in Anion-Deficient SrFeO{sub 3 – δ}

The specific features of the structure in a polycrystalline anion-deficient strontium ferrite SrFeO{sub 3 – δ} have been studied at different oxygen contents by the Mössbauer spectroscopy, X-ray diffraction, and scanning electron microscopy. Three compounds with different compositions have been prepared in the dependence on the condition of heat treatment. Within each of the structures, there are several nonequivalent positions of Fe corresponding to different valence states of Fe and different local oxygen environments, the relation and the degree of distortion of which are changed in the dependence on the oxygen content. Based on the Mössbauer data, the oxygen content in each of the structures is estimated. Yet another ideal Sr{sub 16}Fe{sub 16}O{sub 45} composition of the SrFeO{sub 3 – δ} compound is proposed for an intermediate composition in addition to those available in the literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Benchmark Analysis on Magnetic and Photoluminescence Properties of Selective Metal Ions Doped ZnS Nanoparticles

The creation of diluted magnetic semiconductors (DMSs) at lower dimensions that exhibit room temperature ferromagnetism (RTFM) has been given immense significance for the fabrication of a new class of spintronic devices through utilizing spin degrees of freedom besides charge nature of electrons. In this view, nanocrystals of ZnS doped with 4% concentration of Fe, Co, Ni, Cr, Mn, Sr, Cu, and Ce have been synthesized at room temperature (RT) by chemical co-precipitation method. The samples were examined by various characterization techniques like energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and photoluminescence (PL). EDS spectra revealed the existence of parent elements in the prepared samples. XRD characterization disclosed hexagonal structures of nanocrystals, and no secondary phases were observed in all the samples except for Cu and Ni doped ZnS. FTIR data confirmed the proper substitution of dopants in the host lattice as all the graphs have almost same stretchings. The magnetic nature of each sample was evaluated from M-H graphs of VSM, and it corroborated the transition of magnetic properties due to doping. Pristine ZnS showed diamagnetic nature, while Fe and Sr doped ZnS evinced strong ferromagnetic and anti-ferromagnetic properties, respectively. Photoluminescence studies on Ce, Sr and Mn doped ZnS samples revealed strong emission peaks with enhanced luminescence properties compared to bare ZnS. Cu, Cr and Mn doped ZnS exhibited a red shift in emission wavelengths, whereas Co doped ZnS showed emission peak shifted towards the blue region as compared to the host lattice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗