Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Group-V Doping Impact on Cd-Rich CdTe Single Crystals Grown by Traveling-Heater Method

Cd-rich CdTe single crystals were grown from Cd solvent in the traveling-heater method (THM) rather than the more common Te solvent used for high-resistivity CdTe. The growth process from Cd solution in terms of the solid-liquid interface shape and group-V doping under Cd-rich condition were investigated. Stable, flat solid-liquid interfaces can be obtained by optimizing THM furnace temperature profile. An apparent doping limit in the 10^16 to 10^17 cm^ -3 range which scales weakly with increasing group-V element concentrations in the Cd-rich CdTe samples were indicated from capacitance-voltage measurement. The two-photon excitation time-resolved photoluminescence revealed a bulk lifetime of 20-40 ns.

14 SOLAR ENERGY↗
DOE OSTI2024

TEAMER: Crossflow Turbine Fairing Geometry Optimization - Report and CFD Modeling Files

The dataset includes computational fluid dynamics (CFD) models and simulation files for crossflow turbines as well as a detailed project report. The report documents the project undertaken by the Ocean Renewable Power Company (ORPC) to design and optimize a modular fairing for the Modular RivGen Marine Hydrokinetic (MHK) turbine, which enhances the efficient deployment and operation of turbine arrays. The project focused on optimizing the hydrodynamic performance of the fairing using CFD, with an emphasis on two key geometric parameters: the fairing's cross-sectional shape and the spacing between the rotor and the fairing. The analysis aimed to maximize net power output while also assessing discretized loading to evaluate ultimate and fatigue loads on the turbine components. The numerical modeling was conducted using both the commercial CFD software Star-CCM+ and the open-source code openFOAM, with the latter utilizing the actuator line library, turbinesFOAM. This dual-code approach was intended to increase confidence in the results and demonstrate the viability of using open-source tools for high-fidelity marine energy modeling. This dataset includes all necessary files for actuator line simulations in openFOAM, as well as 2D blade-resolved CFD results, along with Python and Java scripts for setting up and post-processing simulations.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Optimization and Comparison of Modern Offshore Wind Turbine Generators Using GeneratorSE 2.0

As the offshore wind industry keeps growing at a rapid pace, developers are bracing themselves for a huge demand in critical rare earth metals which will threaten an already vulnerable supply chain. The wind energy industry is addressing this problem by investing in modern generator technologies that employ magnets with reduced rare earth content and high-field magnets enabled by rare-earth-free superconductors. In this paper we introduce the National Renewable Energy Laboratory's newly advanced GeneratorSE 2.0, which is a design and optimization tool that was developed to investigate the feasibility of such modern generators. Two direct-drive generator topologies with different magnet materials and mounting arrangements are investigated: an outer-rotor, V-shaped interior permanent magnet generator, and an inner-rotor normally conducting armature, paired with a low-temperature superconducting field with race-track coils. These technologies were evaluated for a range of power ratings between 15 and 25 MW, which represent the next generation of offshore wind turbines for both fixed-bottom and floating applications. The analyses indicate a new trend favoring the low-temperature superconducting technology for the direct-drive system.

direct-drive generators↗
DOE OSTI2021

Optimal deformation procedure for hybrid adaptive x-ray mirror based on mechanical and piezo-driven bending system

Here, a hybrid deformable x-ray mirror consisting of a mechanical bender and a bimorph deformable mirror has been developed to realize adaptive optical systems, such as zoom condenser optics, for synchrotron-radiation-based x-ray microscopy. In the developed system, both bending mechanisms comprehensively contribute to the formation of the target mirror shape and can narrow the role of piezoelectric actuators, thereby enabling a more stable operation. In this study, the behavior of the bimorph mirror under the clamped condition was investigated, and the sharing of the deformation amount for each bending mechanism was optimized to minimize the amplitude of the voltage distribution of the bimorph mirror.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Understanding Catalyst ‘Volcano’ Dependence Through Fermi-Level Controlled Kinetics Using Electronic Theory

The ubiquitous two-step Michaelis–Menten and Temkin–Boudart reaction mechanisms are extended to include the influence of the catalyst electronic subsystem in a 5-step mechanism. The resulting kinetic equation provides an alternative explanation for the well-known volcano-shaped dependence found in catalysis. The equilibrium constants of fast electronic steps are highlighted for their influence on adsorption and desorption through the relative concentration of charged versus neutral intermediates. This generalized concept can be widely applied to determine the optimal catalyst, based on the Fermi level of the material, for reactions proceeding via this universal reaction.

25 ENERGY STORAGE↗
DOE OSTI2021

Noise and error analysis and optimization in particle-based kinetic plasma simulations

In this paper we analyze the noise in macro-particle methods used in plasma physics and fluid dynamics, leading to approaches for minimizing the total error, focusing on electrostatic models in one dimension. We begin by describing kernel density estimation for continuous values of the spatial variable x, expressing the kernel in a form in which its shape and width are represented separately. The covariance matrix of the noise in the density is computed, first for uniform true density. The bandwidth of the covariance matrix C(x,y) is related to the width of the kernel. A feature that stands out is the presence of constant negative terms in the elements of the covariance matrix both on and off-diagonal. These negative correlations are related to the fact that the total number of particles is fixed at each time step; they also lead to the property ∫C(x,y)dy = 0. We investigate the effect of these negative correlations on the electric field computed by Gauss's law, finding that the noise in the electric field is related to a process called the Ornstein-Uhlenbeck bridge, leading to a covariance matrix of the electric field with variance significantly reduced relative to that of a Brownian process. For non-constant density, p(x), still with continuous x, we analyze the total error in the density estimation and discuss it in terms of bias-variance optimization (BVO). For some characteristic length l, determined by the density and its second derivative, and kernel width h, having too few particles within h leads to too much variance; for h that is large relative to l, there is too much smoothing of the density. The optimum between these two limits is found by BVO. For kernels of the same width, it is shown that this optimum (minimum) is weakly sensitive to the kernel shape. Next, we repeat the analysis for x discretized on a grid. In this case the charge deposition rule is determined by a particle shape. An important property to be respected in the discrete system is the exact preservation of total charge on the grid; this property is necessary to ensure that the electric field is equal at both ends, consistent with periodic boundary conditions. We find that if the particle shapes satisfy a partition of unity property, the particle charge deposited on the grid is conserved exactly. Further, if the particle shape is expressed as the convolution of a kernel with another kernel that satisfies the partition of unity, then the particle shape obeys the partition of unity. This property holds for kernels of arbitrary width, including widths that are not integer multiples of the grid spacing. Furthermore, we show results relaxing the approximations used to do BVO optimization analytically, by doing numerical computations of the total error as a function of the kernel width, on a grid in x. The comparison between numerical and analytical results shows good agreement over a range of particle shapes. We discuss the practical implications of our results, including the criteria for design and implementation of computationally efficient particle shapes that take advantage of the developed theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Quantum optimal control of multiple weakly interacting molecular rotors in the time-dependent Hartree approximation

In this work we perform quantum optimal control simulations, based on the Time-Dependent Hartree (TDH) approximation, for systems of three to five dipole-dipole coupled OCS rotors. A control electric field is used to steer all of the individual rotors, arranged in chains and regular polygons in a plane, toward either identical or unique objectives. The goal is to explore the utility of the TDH approximation to model the field-induced dynamics of multiple interacting rotors in the weak dipole-dipole coupling regime. A stochastic hill climbing approach is employed to seek an optimal control field that achieves the desired objectives at a specified target time. We first show that multiple rotors in chain and polygon geometries can be identically oriented in the same direction; these cases do not significantly depend on the presence of the dipole-dipole interaction. Additionally, in particular geometrical arrangements, we demonstrate that individual rotors can be uniquely manipulated toward different objectives with the same field. Specifically, it is shown that for a three rotor chain, the two end rotors can be identically oriented in a specific direction while keeping the middle rotor in its ground state, and for an equilateral triangle, two rotors can be identically oriented in a specific direction while the third rotor is oriented in the opposite direction. These multirotor unique objective cases exploit the shape of the field in coordination with dipole-dipole coupling between the rotors. Comparisons to numerically exact calculations, utilizing the TDH-determined fields, are given for all optimal control studies involving systems of three rotors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Multi-delay coherence imaging spectroscopy optimized for ion temperature measurements in the divertor plasma of the Wendelstein 7-X stellarator

A new coherence imaging spectroscopy (CIS) diagnostic optimized to measure the C 2+ impurity ion temperature T i spatial distribution in the divertor plasma of the W7-X stellarator is designed, tested, and validated. Using CIS to obtain T i in the edge of magnetically confined plasmas has historically been challenging because Doppler broadening and Zeeman splitting have comparable effects on the shape of spectral emission lines. To distinguish between these two mechanisms, a novel approach to birefringent crystal design is employed to minimize the diagnostic’s sensitivity to Zeeman splitting. The recently developed pixelated multi-delay CIS approach is also used to obtain four times as much spectral information as traditional CIS approaches. The T i -optimized CIS diagnostic is validated in a long-pulse W7-X plasma by comparison with a high-resolution spectrometer whose sightlines overlap with the CIS field of view. The CIS and spectrometer T i profiles have the same shape and agree to within 10% on average and 25% in the worst case. Images of the T i distribution near the divertor show toroidally elongated bands aligned with the magnetic field, with T i ranging between 10 and 40 eV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Temperature dependence of the Goos–Hänchen shift in the nonlinear metal-dielectric nanocomposites

In this paper the temperature-dependent Goos–Hänchen (GH) shift of the nonlinear nanocomposites made of the ellipsoidal nonlinear metal nanoparticles and ellipsoidal dielectric nanoparticles is investigated theoretically in the range of the visible wavelengths. We used the effective medium approximation in the quasi-static regime to calculate the effective permittivity of a composite (ε{sub eff}) and the stationary phase method is utilized to investigate the GH shifts. Spectral representation theory has been used to obtain the local electric field in the nonlinear metal nanoparticles. The temperature impact on the GH shift is explained by the temperature-dependent permittivity of nonlinear metal nanoparticles in the range of 300–1200 K. Our numerical analysis revealed that in addition to the magnitude of the GH shift, the lower and upper threshold of the GH bistability as a nonlinear response will be affected by a temperature increment. So that, the width of the bistability, i.e., the difference between the low and high threshold of bistability, can be tuned by temperature. It is important to note that the GH shift can be switched from positive to negative values in high temperatures for a given physical parameters. This effect can open the interesting possibility of optical switching in the considered structures. Moreover, the occurrence of optical bistability as a function of the volume fraction of nanoparticles and depolarization factor (indicating the shape of nanoparticles) are discussed. Finally, the influence of the wavelength and intensity of the incident light on the nonlinear GH shift is presented. Optimizing the results of the present work may be practically utilized in the designing of optical switching-based devices including metal-dielectric nanocomposites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Impact of electrode porosity architecture on electrochemical performances of 1 mm-thick LiFePO4 binder-free Li-ion electrodes fabricated by Spark Plasma Sintering

Thick electrodes with high active material loadings have been intensively studied over the last couple of decades in pursuit of achieving high energy density systems. To optimize and enhance the electrochemical performance of such electrodes, one has to control the pore morphology by, for example, varying the pore size and shape, and the level of porosity. In the present work, the fabrication of thick binder-free LiFePO4 (LFP) electrodes with two different pore sizes (12 and 20 mu m) and porosities (21 vol% and 44 vol%) using Spark Plasma Sintering (SPS) and templating approach is reported. The well-controlled porous architecture inside the thick electrodes is realized by fine-tuning experimental parameters. The impact of porosity architecture on electrochemical performance is quantified and correlated with the 3D tortuosity values determined from both micro-computed tomography and electrochemical impedance-based experimental methods. Based on the micro-computed tomography data analysis, estimated tortuosity values along X, Y, and Z axes reveal an anisotropic effect perpendicularly to the SPS compression axis (Z-direction). This is particularly profoundly observed in the samples with larger pores (20 mu m). The correlation between morphological properties and the rate capability performance is established indicating that the capacity loss happens mainly due to the Li-ion diffusion limitations.

Cathode material↗
DOE OSTI2025

Assessing the coating implications of slurry formulations in NCMA and LFMP blend cathodes for lithium-ion batteries

This paper investigates the implications of slurry formulations and electrode processing on the performance of lithium-ion battery (LIB) cathodes, focusing on Nickel Cobalt Manganese Aluminum (NCMA) and Lithium Ferro Manganese Phosphate (LFMP) blends. Through a comprehensive examination of electrode processing steps, from material selection to coating application, we elucidate the critical role of processing parameters in shaping electrode morphology and electrochemical behavior. Rheological studies reveal the influence of slurry composition on viscosity and flow behavior, highlighting the importance of achieving optimal rheological properties for uniform coating deposition. Electrochemical characterization, including cyclic voltammetry and rate capability tests, unveils the electrochemical behavior of NCMA, LFMP, and their blend, showcasing the synergistic effects of material blending on battery performance. In conclusion, our findings underscore the intricate relationship between slurry formulation, electrode processing, and LIB performance, offering valuable insights for the design and optimization of high-performance electrode materials for next-generation batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Constraining hydrodynamic models of inertial confinement fusion implosions using capsule surrogate experiments

We conduct capsule surrogate experiments at the National Ignition Facility to calibrate radiation hydrodynamic simulations to infer hydrodynamic conditions that are not observable in indirect drive ignition implosions. We tune the simulations by applying laser power and cross beam energy transfer (CBET) saturation multipliers to match the observables from capsule surrogate experiments. Shock timing, velocity, and symmetry are measured in liquid D 2 filled Keyhole capsule surrogate experiments and implosion trajectory, stagnation time, and shape time history are measured in in-flight 2D backlit x-ray radiography experiments (“2DConA”) of D 2 gas filled capsule implosions. Calibrated simulations suggest that the N210808 ignition implosion (fusion target gain = 0.7) had a shell mass remaining at stagnation of less than the nominal %5 (3.8%) and resulted in less confinement. For N221204, the shell was made 5.75 μm thicker to trade implosion velocity for increased confinement and resulted in a target gain = 1.5 with a shell mass remaining of 5.7%. Furthermore, a single adjusted model can reproduce all shock timing data as changes are made to shell thickness (79–85 μm) and laser wavelength separation (1.8–4.0 Å). However, for the 2DConA implosions, a 5% variation in the peak power laser multipliers and a 30% variation in late-time CBET between experiments are needed to match the observed stagnation times, in-flight $P_2$ shape, and hot-spot $P_2$ shape. While progress is being made to improve the models in simulations using focused experiments, capsule surrogate experiments will continue to be needed to optimize future ignition designs.

Lasers↗
DOE OSTI2023

EV charging site day-ahead load prediction in a synthetic environment for RL based grid-informed charging

Ensuring grid health in the face of increasing demand for power is an emerging challenge especially due to transportation electrification. A free market approach to influencing electric vehicle (EV) load through grid-informed hourly dynamic pricing is introduced in this work. The setting of charging price is done by a reinforcement learning (RL) agent that learns the complicated dynamics by interacting with a synthetic environment. This synthetic environment is a combination of distribution feeder simulation, EV charger user behavior dynamics, and EV charging simulation. A key module in this synthetic environment involves obtaining the day-ahead charging profile of EV charging stations based on real-world past data. The day-ahead prediction is also useful in other traditional optimizations related to EV charge scheduling. The proposed approach involves using EV charging data from two different past time horizons – one to determine the shape of the daily profile and the other to determine a scaling value to capture actual energy consumption. Real-world charging data over many years from the ACN charging network has been used to demonstrate the ability to predict the day-ahead profile with only charge session data. Both Python and MATLAB have been used for data cleaning, processing, analysis, and prediction.

Suryanarayana, Harish↗
DOE OSTI2018

CONCEPTUAL MODEL FOR HYDROLOGY-BASED GEOMORPHIC EVAPOTRANSPIRATION COVERS FOR RECLAMATION OF MINE LAND

Currently there are about half a million abandoned mine sites in the U.S. and New Mexico has an estimated 15,000. Surface mining imposes severe ecological effects on the land because it not only alters the vegetation, soils, bedrock, and landforms, but also changes the surface hydrology, groundwater, and flow paths that ultimately result in degraded ecology and water quality. Two relatively new methodologies, fluvial geomorphic landform design and evapotranspiration (ET) waste covers, offer solutions to reclaim these sites for long term. GeoFluvTM is a specific geomorphic grading design method that uses natural analogues for post-mining landscapes and uses design input values taken from stable natural landscapes to make a reclamation design that provides hydrological function, supports ecosystem integrity, and is cost-effective, sustainable, and more visually attractive. It has documented the ability to produce surface runoff water quality equal to or better than adjacent undisturbed lands and has been used for disturbed lands, including active and abandoned mine sites. To manage the subsurface hydrology, surface ET covers have been used above landfills, waste sites, and mine lands. ET covers protect the underlying materials against erosion, provide a medium for vegetation growth, store precipitation within the cover, and release the stored water into atmosphere so that the infiltration of precipitation is minimized. A conceptual design study is carried out based on an actual, typical abandoned mine site near Raton, New Mexico, to which common problem conditions at abandoned mine sites are assumed. The purpose of this study is to demonstrate that superior covers can be designed by integrating these two remediation technologies (geomorphic grading and ET cover) as a geomorphic ET (GET) cover. The overall shape of the GET cover can mimic the natural topography of the surrounding area, while the thickness and layering of the cover can be optimized for best vegetation growth and infiltration control. The application of GET cover technology on mine land is expected to substantially improve the reclamation effects by coupling the benefits of the geomorphic cover (drainage reduction, runoff management, vegetation diversity) with the benefits of ET covers (vegetation growth and sustainability, percolation reduction, protection of surface and groundwater).

Tailings, Geotechnical, Water Management, Vegetati↗
DOE OSTI2020

A Replacement Cold Neutron Guide System for HFIR (Conceptual Design Report)

The design of a replacement cold neutron guide system for the High Flux Isotope Reactor (HFIR) is presented. The proposed six-channel design uses the latest technologies and is optimally designed to account for operational and site constraints. These include the design of the cold source and the beam tube, the size and shape of the penetrations in the reactor confinement boundary, and the shape and orientation of the guide hall. The existing user instruments are a macromolecular diffractometer (IMAGINE), an IMAGING station, two small-angle neutron scattering (SANS) instruments (Bio-SANS and GP-SANS), and a cold triple-axis spectrometer (C-TAX). These instruments will all be reinstalled at end-of-guide positions with improved performance, and a position for a new high-performance neutron spin echo instrument will be created. The proposed guide design requires an extension to the guide hall toward the south. The calculated flux gain for a typical experiment is between a factor of 1.3 and 3 for all instruments, with the exception of the C-TAX instrument, which stands to gain a factor of >30 in flux at the sample. The new guide system will also offer additional performance gains, such as an increase in Q-range on Bio-SANS. The stated performance gains do not take into account any potential performance gains resulting from renewal and realignment of the guide system. The design of the guide system in the common sections up to about 25 m from the source is considered to be complete and ready for engineering design, while the designs of the instrument-specific guides are in some cases still a work in progress. The present report describes the current status of those designs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Uncertainty quantification and optimization of precipitating hydrometeor parameters for winter precipitation in a cloud microphysics scheme

The precipitating hydrometeor parameters used in cloud microphysics schemes carry inherent uncertainties. The quantification of these uncertainties, together with parameter optimization, can significantly improve precipitation forecasts. This study investigates the effects of 13 parameters in the Weather Research and Forecasting (WRF) Double-Moment 6-class (WDM6) microphysics scheme, which define the hydrometeor characteristics such as fall velocity–diameter and mass–diameter relationships, as well as the shape parameter of the drop size distribution for precipitating particles such as rain, snow, and graupel on simulated winter precipitation. A comparison between the model's pre-defined parameters and observations from the International Collaborative Experiments for the PyeongChang 2018 Olympic and Paralympic winter games (ICE-POP 2018) field campaign reveals that the fall velocity–diameter relationship for rain, the mass–diameter relationships for snow and graupel, and the shape parameters for all precipitating particles in the WDM6 scheme deviate from the median values observed by the two-dimensional video disdrometer (2DVD). To quantify parameter sensitivities, a perturbed parameter ensemble (PPE) of 256 simulations was conducted within parameter ranges constrained by 2DVD observations for three winter precipitation cases. Bayesian optimization was then applied to identify parameter sets that minimized the root mean square error (RMSE) for each case, achieving reductions of up to 30.2 %. These results demonstrate that ensemble-based uncertainty quantification and parameter optimization can help identify key parameters and provide a pathway to improving precipitation simulation performance. In addition, measurement sites can be strategically selected based on regions that show high sensitivity to variations in hydrometeor characteristic parameters.

Bayesian optimization↗
DOE OSTI2024

Reducing Richtmyer–Meshkov instability jet velocity via inverse design

In this work, we detail a novel application of inverse design and advanced manufacturing to rapidly develop and experimentally validate modifications to a shaped charge jet analog. The shaped charge jet analog comprises a copper liner, a high explosive (HE), and a silicone buffer. Here, we apply a genetic algorithm to determine an optimal buffer design that can be placed between the liner and the HE that results in the largest possible change in jet velocity. The use of a genetic algorithm allows for discoveries of unintuitive, complex, yet optimal buffer designs. Experiments using the optimal design verified the effectiveness of the buffer and validated the machine learning approach to hydrodynamic design optimization.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Implementation of a High-Speed Multichannel Data Acquisition System for Magnetic Diagnostics and Plasma Centroid Position Control in ISTTOK

In tokamak and other fusion devices, magnetic control is the main tool that allows to regulate the plasma current, position and shape; it is in charge of actuating the desired plasma current waveform, steering the plasma position to a given set point and maintain the plasma shape close to a prescribed plasma equilibrium. This work describes the application of several physics concepts and computational tools in order to obtain a novel optimal controller for the plasma centroid position, which has been implemented and tested in the real-time plasma control system at the ISTTOK tokamak. A key point for the development of the new control system was the installation of a recently upgraded hardware, that numerically integrates in real-time the magnetic probes signals.

poloidal field coils↗