Search NASA⌕ Search

SEARCH · Search NASA

Results for “silicate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

A HIGH CURRENT DENSITY LI+ ALUMINO-SILICATE ION SOURCE FOR TARGET HEATING EXPERIMENTS

The NDCX-II accelerator for target heating experiments has been designed to use a large diameter ({approx_equal} 10.9 cm) Li{sup +} doped alumino-silicate source with a pulse duration of 0.5 {micro}s, and beam current of {approx_equal} 93 mA. Characterization of a prototype lithium alumino-silicate sources is presented. Using 6.35mm diameter prototype emitters (coated on a {approx_equal} 75% porous tungsten substrate), at a temperature of {approx_equal} 1275 C, a space-charge limited Li{sup +} beam current density of {approx_equal} 1 mA/cm{sup 2} was measured. At higher extraction voltage, the source is emission limited at around {approx_equal} 1.5 mA/cm{sup 2}, weakly dependent on the applied voltage. The lifetime of the ion source is {approx_equal} 50 hours while pulsing the extraction voltage at 2 to 3 times per minute. Measurements show that the life time of the ion source does not depend only on beam current extraction, and lithium loss may be dominated by neutral loss or by evaporation. The life time of a source is around {ge} 10 hours in a DC mode extraction, and the extracted charge is {approx_equal} 75% of the available Li in the sample. It is inferred that pulsed heating may increase the life time of a source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Battery components employing a silicate binder

A battery component structure employing inorganic-silicate binders. In some embodiments, casting or coating of components may be performed using aqueous slurries of silicates and electrode materials or separator materials.

25 ENERGY STORAGE↗

Further Investigations of the Effect of Replacing Lithium by Sodium on Lithium Silicate Scintillating Glass Efficiency

Ce3+ doped lithium (6Li) silicate glasses are thermal neutron detectors. Prior work showed that when sodium (Na) is substituted for Li the scintillation efficiency, under beta particle stimulation, increased and then decreased as the sodium (Na) content was increased [1]. When all the 6Li was replaced by Na no scintillation was observed. Raman spectra, acquired using a visible excitation source provided no evidence of anomalous behavior. SEM microscopy did show some phase separation, but there was no obvious correlation with the scintillation efficiency. We have reexamined these glass samples using deep UV Raman excitation which reduces fluorescence interference. The newly acquired spectra show evidence of phase separation in the glasses. Specifically we see a peak at 800 cm-1 Raman shift which can be assigned to a vitreous silica moiety that results from phase separation. There is a strong correlation between this peak's area, the scintillation efficiency, and the Na content. The observed trend suggests that phase separation enhances scintillation and addition of Na reduces the amount of phase separation. We also see evidence of at least two defect structures that can be tentatively assigned to a three-membered ring structure and an oxygen vacancy. The latter is fairly strongly correlated with enhanced scintillation efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of temperature and aluminium on calcium (alumino)silicate hydrate chemistry under equilibrium conditions

There exists limited information regarding the effect of temperature on the structure and solubility of calcium aluminosilicate hydrate (C–A–S–H). Here, calcium (alumino)silicate hydrate (C–(A–)S–H) is synthesised at Ca/Si = 1, Al/Si ≤ 0.15 and equilibrated at 7–80 °C. These systems increase in phase-purity, long-range order, and degree of polymerisation of C–(A–)S–H chains at higher temperatures; the most highly polymerised, crystalline and cross-linked C–(A–)S–H product is formed at Al/Si = 0.1 and 80 °C. Solubility products for C–(A–)S–H were calculated via determination of the solid-phase compositions and measurements of the concentrations of dissolved species in contact with the solid products, and show that the solubilities of C–(A–)S–H change slightly, within the experimental uncertainty, as a function of Al/Si ratio and temperature between 7 °C and 80 °C. These results are important in the development of thermodynamic models for C–(A–)S–H to enable accurate thermodynamic modelling of cement-based materials.

36 MATERIALS SCIENCE↗

The structural influence of aluminium ions on emission characteristics of Sm{sup 3+} ions in lead aluminium silicate glass system

Graphical abstract: The optical absorption and photoluminescence spectra of Sm ions in PbO-Al{sub 2}O{sub 3}-SiO{sub 2} glasses mixed with different concentrations of Al{sub 2}O{sub 3} have been investigated. From these spectra, the emission probabilities and also fluorescence lifetime principal transition viz., {sup 4}G{sub 5/2} {yields} {sup 6}H{sub 7/2} of Sm{sup 3+} ions of has been evaluated. The analysis of results of these studies has indicated that there is a less radiative trapping and enhanced fluorescence lifetime and high quantum efficiency in the glasses mixed with 8.0 mol% of Al{sub 2}O{sub 3}. Highlights: Black-Right-Pointing-Pointer Glasses of the composition (40 - x)PbO-(5 + x)Al{sub 2}O{sub 3}-54SiO{sub 2}:1.0Sm{sub 2}O{sub 3} with x = 5-10 mol% were prepared. Black-Right-Pointing-Pointer Spectroscopic properties (OA, PL and IR) were investigated. Black-Right-Pointing-Pointer Emission probability, lifetime, branching ratio of {sup 4}G{sub 5/2} {yields} {sup 6}H{sub 7/2} transition of Sm{sup 3+} have been evaluated. Black-Right-Pointing-Pointer Analysis of the results indicated that glass mixed with 8.0 mol% exhibits high luminescence efficiency. -- Abstract: Optical absorption and photoluminescence characteristics of Sm{sup 3+} ions in lead silicate glasses mixed with different concentrations of Al{sub 2}O{sub 3} (5-10 mol%) have been investigated. From these studies, the radiative properties viz., spontaneous emission probability A, the total emission probability, the radiative lifetime {tau}{sub R}, the fluorescent branching ratio {beta} of emission transition of {sup 4}G{sub 5/2} {yields} {sup 6}H{sub 7/2} along with other transitions for Sm{sup 3+} have been evaluated and found to be the highest for the glass mixed with 8.0 mol% of Al{sub 2}O{sub 3}.The IR spectral studies have indicated that Al{sup 3+} ions do participate in the glass network with AlO{sub 4} and AlO{sub 6} structural units and further revealed that the concentration of octahedral aluminium ions induce bonding defects in the glass network. Such bonding defects are assumed to be responsible for low phonon losses in these glasses and lead to higher values of radiative parameters for the glass mixed with 8.0 mol% of Al{sub 2}O{sub 3}.

36 MATERIALS SCIENCE↗

Small- and Wide-Angle X-ray Scattering Studies of Liquid–Liquid Phase Separation in Silicate Melts

Incongruent liquid-liquid phase separation is a common phenomenon in molten oxides, but there are few structural studies due to the high temperatures involved ca. >1600oC. In this work, we present a high-energy x-ray combined small/wide angle scattering (SAXS/WAXS) method that can directly probe non-equilibrium phase diagrams. The Porod exponent in the SAXS signal is extracted, which measures the roughness of the interface formed between different phases. Problematic volatilization of silica in Al 2 O 3 -, CaO-, and MgO-bearing silica-rich liquids were minimized using levitation, laser heating and rapid time-resolved measurements (lasting tens of seconds), to probe the kinetics of the phase separation process. The WAXS measurement simultaneously probes the local atomic structure of the liquid state and shows that the primary structural changes are associated with the SiO 2 network. Cation coordination numbers extracted from pair distribution functions support the model that the origin of phase separation in binary silicate systems is due to Coulombic repulsions between poorly screened cations. For CaO-SiO 2 , the liquid-liquid phase separation is found to correlate with a pause in the temperature dependent atomic disorder associated with SiO4 tetrahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Confined Water Dissociation in Microporous Defective Silicates: Mechanism, Dipole Distribution, and Impact on Substrate Properties.

Interest in microporous materials has risen in recent years, as they offer a confined environment that is optimal to enhance chemical reactions. Calcium silicate hydrate (C-S-H) gel, the main component of cement, presents a layered structure with sub-nanometer-size disordered pores filled with water and cations. The size of the pores and the hydrophilicity of the environment make C-S-H gel an excellent system to study the possibility of confined water reactions. To investigate it, we have performed molecular dynamics simulations using the ReaxFF force field. The results show that water does dissociate to form hydroxyl groups. We have analyzed the water dissociation mechanism, as well as the changes in the structure and water affinity of the C-S-H matrix and water polarization, comparing the results with the behavior of water in a defective zeolite. Finally, we establish a relationship between water dissociation in C-S-H gel and the increase of hardness due to a transformation from a two- to a three-dimensional structure.

36 MATERIALS SCIENCE↗

Effect of Swift Heavy Ion Irradiation on Lithium Zinc Silicate Glasses: A Photoluminescence Study

Lithium zinc silicate glasses with and without copper were prepared by melt-quench method and their luminescence characteristics after swift heavy ion irradiation has been investigated. Based on these studies it is established that both these glasses contain colour centres and the luminescence from such centres get significantly quenched once these samples get irradiated with 100 MeV swift heavy Ag{sup +} ions with a fluence of 10{sup 13} ions/cm{sup 2} at room temperature. Trapping of the charge carriers by the increased defect concentration brought about by irradiation is responsible for the decrease in the luminescence intensity from the irradiated samples. Copper in these glasses mainly exists as Cu{sup +} ions as revealed by the broad emission around 500 nm.

36 MATERIALS SCIENCE↗

Infrared Spectroscopic Study For Structural Investigation Of Lithium Lead Silicate Glasses

Lithium lead silicate glasses with composition 30Li{sub 2}O{center_dot}(70-x)PbO{center_dot}xSiO{sub 2}(where, x = 10, 20, 30, 40, 50 mol %)(LPS glasses) were prepared by normal melt quench technique at 1373 K for half an hour in air to understand their structure. Compositional dependence of density, molar volume and glass transition temperature of these glasses indicates more compactness of the glass structure with increasing SiO{sub 2} content. Fourier transform infrared (FTIR) spectroscopic data obtained for these glasses was used to investigate the changes induced in the local structure of samples as the ratio between PbO and SiO{sub 2} content changes from 6.0 to 0.4. The observed absorption band around 450-510 cm{sup -1} in IR spectra of these glasses indicates the presence of network forming PbO{sub 4} tetrahedral units in glass structure. The increase in intensity with increasing SiO{sub 2} content (upto x = 30 mol %) suggests superposition of Pb-O and Si-O bond vibrations in absorption band around 450-510 cm{sup -1}. The values of optical basicity in these glasses were found to be dependent directly on PbO/SiO{sub 2} ratio.

36 MATERIALS SCIENCE↗

Silicate-free growth of high-quality ultrathin cerium oxide films on Si(111)

Ultrathin Ce{sub 2}O{sub 3} layers have been grown on Si(111) by reactive metal deposition in an oxygen background and characterized by x-ray standing waves, x-ray diffraction, x-ray photoelectron spectroscopy, and low-energy electron diffraction to elucidate and quantify both atomic structure and chemical composition. It is demonstrated that highly ordered, mostly B-oriented, epitaxial ceria films can be achieved by preadsorption of a monolayer of atomic chlorine, effectively passivating the substrate and thereby suppressing cerium silicate and silicon oxide formation at the interface.

36 MATERIALS SCIENCE↗

Oxygen isotopic investigation of silicic magmatism in the Stillwater caldera complex, Nevada: Generation of large-volume, low-δ 18 O rhyolitic tuffs and assessment of their regional context in the Great Basin of the western United States

Successive caldera-forming eruptions from ca. 30 to 25 Ma generated a large nested caldera complex in western Nevada that was subsequently dissected by Basin and Range extension, providing extraordinary cross-sectional views through diverse volcanic and plutonic rocks. A high-resolution oxygen isotopic study was conducted on units that represent all major parts of the Job Canyon, Louderback Mountains, Poco Canyon, and Elevenmile Canyon caldera cycles (29.2–25.1 Ma), and several Cretaceous plutons that flank the Stillwater caldera complex. We provide new oxygen and strontium isotope data for 12 additional caldera centers in the Great Basin, which are synthesized with >150 published oxygen and strontium isotope analyses for regional Mesozoic basement rocks. Stillwater zircons span a large isotopic range (δ 18 O zircon of 3.6‰–8.2‰), and all caldera cycles possess low-δ 18 O zircons. In some cases, they are a small proportion of the total populations, and in others, they dominate, such as in the low-δ 18 O rhyolitic tuffs of Job Canyon and Poco Canyon (δ 18 O zircon = 4.0‰–4.3‰; δ 18 O magma = 5.5‰–6‰). These are the first low-δ 18 O rhyolites documented in middle Cenozoic calderas of the Great Basin, adding to the global occurrence of these important magma types that fingerprint recycling of shallow crust altered by low-δ 18 O meteoric waters. The appearance of low-δ 18 O rhyolites in the Stillwater caldera complex is overprinted on a Great Basin–wide trend of miogeoclinal sediment contribution to silicic magmas that elevates δ 18 O compositions, making identification of 18 O depletions difficult. Though not a nominally low-δ 18 O rhyolite, the tuff of Elevenmile Canyon possesses both low-δ 18 O and high-δ 18 O zircon cores that are overgrown by homogenized zircon rims that approximate the bulk zircon average, pointing to batch assembly of isotopically diverse upper crustal melts to generate one of the most voluminous (2500–5000 km 3 ) tuff eruptions in the Great Basin. Despite overlapping in space and time, each caldera-forming cycle of the Stillwater complex has a unique oxygen isotope record as retained in single zircons. Most plutons that were spatially and temporally coincident with calderas have isotopic compositions that diverge from the caldera-forming tuffs and cannot be their cogenetic remnants.

58 GEOSCIENCES↗

Letter - X-ray diffraction and Mossbauer spectroscopy of Fe{sup 3+}-bearing Mg-silicate post-perovskite at 128-138 GPa.

The effect of ferric iron on the properties of Mg-silicate post-perovskite (PPv) were studied up to 138 GPa using synchrotron X-ray diffraction and Moessbauer spectroscopy. Our diffraction measurements revealed that the incorporation of Fe{sup 3+} has virtually no effect on the volume of PPv, in contrast to Fe{sup 2+}, which increases the volume. Therefore, incorporation of Fe{sup 3+} increases the density of PPv much more effectively than Fe{sup 2+}. Moessbauer spectroscopy suggests that Fe{sup 3+} enters PPv through charge-coupled substitution and is high spin in the bipolar prismatic site and low spin in the octahedral site (i.e., mixed spin state). Our results may have important implications for the gravitational stability of lower-mantle heterogeneities.

36 MATERIALS SCIENCE↗

Fundamental Study on Effects of Borate on the Sorption of Cesium ions to Calcium Silicate Hydrate - 18068

The effects of borate on the formation of calcium silicate hydrate (C-S-H) and the Cs sorption behavior were examined by the sorption experiments without drying process. C-S-H was prepared by mixing calcium oxide, fumed silica, and sodium-borate solution in a glove bag filled with nitrogen gas. The volume of sodium borate solution was 30 mL, in order to adjust the liquid/solid weight ratio to 20. The Ca/Si molar ratio of C-S-H was adjusted so as to be 0.4, 0.8, 1.2, and 1.6. The concentration of sodium borate was set to the range from 0 to 600 mM in the sample solution. The solution of cesium chloride was added to the each sample for setting the initial concentration of Cs ions to 1 mM. The samples were cured in a shaking chamber at 298 K and 120 strokes/min during 7 days. In addition, for estimating the curing-period dependencies, the curing period was set to the range from 0.5 to 28 days for the condition of 0 M or 400 M sodium borate. In the results, under the conditions of the borate concentration up to 200 mM, the sorption behavior of Cs ions to C-S-H was hardly different from those without borate, while the sorption ratio of Cs ions for the borate concentration of 400 mM or more decreased by down to 46% compared with the blank samples. However, the sorption ratio of Cs ions in the case of 400 mM borate increased and reached as much as that for the blank sample until 28 days. Besides, the Raman spectra of solid phase showed that the peak derived from boric acid or borate (calcium borate or calcium borosilicate hydrate) appeared under the high concentration conditions of borate, and the peak of the silica chain of C-S-H was weakened. Considering the practical concentration of borate and much longer period for the performance assessment of the solidified wastes, the immobilization properties for Cs ions of cementitious materials contained borate will be kept appropriately in the disposal system for low-level wastes. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Particle Size on Raman Signal Strength of Silicate Minerals

Understanding the effects of particle size is necessary for quantifying minerals in mixtures using Raman spectroscopy. Raman signal intensity is evaluated using six common silicate minerals (two olivines, two pyroxenes, and two feldspars) at 10 particle size ranges. For olivines and feldspars, the highest peak intensities are observed in samples with 38–63 and 63–106 μm particle sizes. There is no such consistent trend for the pyroxene samples, although the overall low signal strength complicates those measurements. In conclusion, Raman spectra of samples with varying particle sizes appear to be influenced by two competing effects: scattering from particle boundaries and effective sampling volume.

58 GEOSCIENCES↗

Structure and thermodynamics of calcium rare earth silicate oxyapatites, Ca 2 RE 8 (SiO 4 ) 6 O 2 (RE = Pr, Tb, Ho, Tm)

Calcium rare earth silicate oxyapatites, (Ca 2 RE 8 (SiO 4 ) 6 O 2 ), are of interest as components of glass-ceramic nuclear waste forms. To assess their long-term behavior in a geologic repository, it is essential to determine their structure and thermodynamic stability at relevant conditions. Here, in this work, we performed detailed structural and thermodynamic investigations on Ca 2 Pr 8 (SiO 4 ) 6 O 2 , Ca 2 Tb 8 (SiO 4 ) 6 O 2 , Ca 2 Ho 8 (SiO 4 ) 6 O 2 , and Ca 2 Tm 8 (SiO 4 ) 6 O 2 by high energy synchrotron powder X-ray diffraction combined with Rietveld analysis and high temperature oxide melt drop solution calorimetry. Enthalpies of formation from constituent oxides (ΔH f,ox ) were determined to be -765.1 ± 22.8 kJ/mol for Ca 2 Pr 8 (SiO 4 ) 6 O 2 ; -638.9 ± 20.5 kJ/mol for Ca 2 Tb 8 (SiO 4 ) 6 O 2 ; -643.3 ± 10.3 kJ/mol for Ca 2 Ho 8 (SiO 4 ) 6 O 2 ; and -403.2 ± 5.1 kJ/mol for Ca 2 Tm 8 (SiO 4 ) 6 O 2 . These thermodynamic parameters were used in assessing the thermochemical stability of these phases in the presence of water vapor from room temperature to 600 K, as encountered in the subsurface environments of a geological repository.

36 MATERIALS SCIENCE↗

Crystal structure, thermal expansivity, and elasticity of OH-chondrodite: Trends among dense hydrous magnesium silicates

Here, we report the structure and thermoelastic properties of OH-chondrodite. The sample was synthesized at 12 GPa and 1523 K, coexisting with hydroxyl-clinohumite and hydrous olivine. The Fe content Fe/(Fe+Mg) is 1.1 mol%, and the monoclinic unit-cell parameters are: a = 4.7459(2) Å, b = 10.3480(7) Å, c = 7.9002(6) Å, α = 108.702(7)°, and V = 367.50(4) Å3. At ambient conditions the crystal structure was refined in space group P 2 1 /b from 1915 unique reflection intensities measured by single-crystal x-ray diffraction. The volume thermal expansion coefficient was measured between 150 and 800 K, resulting in α V = 2.8(5)×10 -9 (K -2 ) × T + 40.9(7) × 10 -6 (K -1 ) – 0.81(3)(K)/T 2 , with an average value of 38.0(9)×10 -6 K -1 . Brillouin spectroscopy was used to measure a set of acoustic velocities from which all thirteen components (C ij ) of the elastic tensor were determined. The Voigt-Reuss-Hill average of the moduli yield for the adiabatic bulk modulus, K S 0 = 117.9(12) GPa, and for shear modulus, G 0 = 70.1(5) GPa. The Reuss bound on the isothermal bulk modulus (K T0 ) is 114.2(14) GPa. From the measured thermodynamic properties, the Grüneisen parameter (γ) is calculated to be 1.66(4). Fitting previous static compression data using our independently measured bulk modulus (isothermal Reuss bound) as a fixed parameter, we refined the first pressure derivative of the bulk modulus, K T ’ = 5.5(1). Systematic trends between H 2 O content and physical properties are evaluated among dense hydrous magnesium silicate (DHMS) phases along the forsterite-brucite join.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distributions of Ag, Bi, and Sb as Minor Elements between Iron-Silicate Slag and Copper in Equilibrium with Tridymite in the Cu-Fe-O-Si System at T = 1250 °C and 1300 °C (1523 K and 1573 K)

New experimental data on the distributions of silver (Ag), bismuth (Bi), and antimony (Sb) between liquid iron-silicate slag and liquid copper metal in equilibrium with tridymite in the Cu-Fe-O-Si system at T = 1250 °C and 1300 °C (1523 K and 1573 K) have been obtained. The experimental methodology involved high-temperature equilibration, rapid quenching of the equilibrated phases, followed by direct measurement of the equilibrium phases with electron probe X-ray microanalysis (EPMA) for measurement of major element concentrations and laser ablation inductively coupled plasma mass spectrometry (LAICPMS) for the measurement of minor element concentrations. The 4-point test approach was employed to confirm the achievement of chemical equilibrium in the current study. Open-system equilibration on quartz substrates in controlled gas atmospheres (CO/CO{sub 2}/Ar) and closed-system equilibration in sealed quartz ampoules were used. The new experimental data resolve significant discrepancies found in previous studies and can be used as input for the development of thermodynamic databases for copper-making processes.

36 MATERIALS SCIENCE↗

Assessing the Influence of NaCl on the Reduction of a Siliceous Laterite Nickel Ore Under Caron Process Conditions

The reduction by hydrogen and the thermal decomposition of a siliceous nickel laterite ore in the presence of NaCl were studied using thermogravimetric analysis (TGA). Reduction tests on H{sub 2} atmosphere in rotary kiln were performed in the presence of NaCl and the product of the reaction was leached in ammoniacal solution. The presence of only 1 pct of NaCl in the furnace increased the nickel extraction values from ≈ 3 to ≈ 90 pct when the experiment was carried out at 850 °C. According to the results of X-ray diffractometry and TGA, the presence of NaCl in the system and the reducing atmosphere of H{sub 2} promote the segregation of nickel according to the following steps: (1) Nickel oxide reduction by hydrogen: NiO + H{sub 2(g)} → Ni + H{sub 2}O{sub (g)}. (2) Formation of HCl: Al{sub 2}SiO{sub 5} + 2NaCl + SiO{sub 2} + H{sub 2}O → 2HCl(g) + 2NaAlSiO{sub 4}. (3) Chlorination of metallic nickel by HCl: Ni + 2HCl{sub (g)} → NiCl{sub 2} + H{sub 2(g)}. (4) Reduction of nickel chloride by hydrogen: NiCl{sub 2} + H{sub 2(g)} → Ni + 2HCl{sub (g)}.

36 MATERIALS SCIENCE↗