Search NASA⌕ Search

SEARCH · Search NASA

Results for “simplification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Aerodynamic shape optimization directed toward a supersonic transport using sensitivity analysis

This investigation was conducted from March 1994 to August 1995, primarily, to extend and implement the previously developed aerodynamic design optimization methodologies for the problems related to a supersonic transport design. These methods had demonstrated promise to improve the designs (more specifically, the shape) of aerodynamic surfaces, by coupling optimization algorithms (OA) with Computational Fluid Dynamics (CFD) algorithms via sensitivity analyses (SA) with surface definition methods from Computer Aided Design (CAD). The present extensions of this method and their supersonic implementations have produced wing section designs, delta wing designs, cranked-delta wing designs, and nacelle designs, all of which have been reported in the open literature. Despite the fact that these configurations were highly simplified to be of any practical or commercial use, they served the algorithmic and proof-of-concept objectives of the study very well. The primary cause for the configurational simplifications, other than the usual simplify-to-study the fundamentals reason, were the premature closing of the project. Only after the first of the originally intended three-year term, both the funds and the computer resources supporting the project were abruptly cut due to their severe shortages at the funding agency. Nonetheless, it was shown that the extended methodologies could be viable options in optimizing the design of not only an isolated single-component configuration, but also a multiple-component configuration in supersonic and viscous flow. This allowed designing with the mutual interference of the components being one of the constraints all along the evolution of the shapes.

Baysal, Oktay↗
NASA NTRS1996

Heat and Momentum Transfer Studies in High Reynolds Number Wavy Films at Normal and Reduced Gravity Conditions

We examined the effect of the gas flow on the liquid film when the gas flows in the countercurrent direction in a vertical pipe at normal gravity conditions. The most dramatic effect of the simultaneous flow of gas and liquid in pipes is the greatly increased transport rates of heat, mass, and momentum. In practical situations this enhancement can be a benefit or it can result in serious operational problems. For example, gas-liquid flow always results in substantially higher pressure drop and this is usually undesirable. However, much higher heat transfer coefficients can be expected and this can obviously be of benefit for purposes of design. Unfortunately, designers know so little of the behavior of such two phase systems and as a result these advantages are not utilized. Due to the complexity of the second order boundary model as well as the fact that the pressure variation across the film is small compared to the imposed gas phase pressure, the countercurrent gas flow affect was studied for the standard boundary layer model. A different stream function that can compensate the shear stress affect was developed and this stream function also can predict periodic solutions. The discretized model equations were transformed to a traveling wave coordinate system. A stability analysis of these sets of equations showed the presence of a Hopf bifurcation for certain values of the traveling wave velocity and the shear stress. The Hopf celerity was increased due to the countercurrent shear. For low flow rate the increases of celerity are more than for the high flow rate, which was also observed in experiments. Numerical integration of a traveling wave simplification of the model also predicts the existence of chaotic large amplitude, nonperiodic waves as observed in the experiments. The film thickness was increased by the shear.

Balakotaiah, V.↗
NASA NTRS1996

Prop Rotor Acoustics for Conceptual Design

The report describes a methodology for the simple prediction of noise generated by a tilt-rotor aircraft in hover and forward flight. In order to avoid the computational penalties associated with exact noise calculations, simplifications to the loading noise calculation and the blade-vortex interaction noise calculation have been introduced. The loading noise computation utilizes a constant chordwise loading assumption, while the BVI noise level is estimated through use of a dimensionless parameter, here termed 'BVI number.' The acoustic computation code, designed as a module for use with VASCOMP, has two modes of operation, one as a quick estimator of acoustic amplitude produced by a tilt rotor with a typical rotor design and the other as a tool for rotor parametric design studies.

Wells, Valana L.↗
NASA NTRS1995

A dynamic model of the three-fluid solar wind: Equilibrium structures and fluxes

We report results from a dynamic approach to equilibrium for a three fluid solar-wind model in spherical 1D. We advance the mass, momentum and energy transport equations for protons, alpha particles and electrons, with full interspecies coulomb coupling and the simplifications recommended by Burgi (1992). They include no ion heat conduction and an ambipolar electric field in place of the negligible electron momentum coupling. At the inner boundary (the solar surface) we specify the inflow velocity, mass flux, and temperature for each species, and at the outer boundary at large radius we allow the fluids to flow freely from the computational domain. Starting from an initial wind model (e.g.. single fluid) we evolve to a three-fluid steady state. We will describe comparisons with Burgi's static equilibrium results. and examine the stability of the discontinuities which appear in his derived parameter variations.

Ruden, S. P.↗
NASA NTRS1995

Numerical simulation of corotating interaction regions

We report on a numerical simulation of Corotating Interaction Regions (CIRs) in the solar wind. We employ an MHD calculation with a tilted dipole model: slow wind is assumed around the tilted current sheet. As a simplifying assumption the solar wind is kept radial, meridional and azimuthal deflections are neglected. Despite of this simplification the model reproduces several observed features of CIR-s. CIR-s turn out most prominent at mid-latitudes. Toward increasing heliographic latitudes, reverse shocks become dominant, forward shocks tend to become weaker then disappear. The frozen in magnetic field is calculated and applied for the simulation of the transport of cosmic rays in the heliosphere. Some consequences on recurrent cosmic ray phenomena and on the acceleration of energetic particles will be discussed.

Kota, J.↗
NASA NTRS1996

Prop Rotor Acoustics for Conceptual Design

The report describes a methodology for the simple prediction of noise generated by a tilt-rotor aircraft in hover and forward flight. In order to avoid the computational penalties associated with exact noise calculations, simplifications to the loading noise calculation and the blade-vortex interaction noise calculation have been introduced. The loading noise computation utilizes a constant chordwise loading assumption, while the BVI noise level is estimated through use of a dimensionless parameter, here termed 'BVI number.' The acoustic computation code, designed as a module for use with VASCOMP, has two modes of operation, one as a quick estimator of acoustic amplitude produced by a tilt rotor with a typical rotor design and the other as a tool for rotor parametric design studies.

Wells, Valana L.↗
NASA NTRS1995

On why dynamic subgrid-scale models work

Dynamic subgrid models have proved to be remarkably successful in predicting the behavior of turbulent flows. Part of the reasons for their success are well understood. Since they are constructed to generate an effective viscosity which is proportional to some measure of the turbulent energy at the high wavenumber end of the spectrum, their eddy viscosity vanishes as the flow becomes laminar. This alone would justify their use over simpler models. But beyond this obvious advantage, which is confined to inhomogeneous and evolving flows, the reason why they also work better in simpler homogeneous cases, and how they do it without any obvious adjustable parameter, is not clear. This lack of understanding of the internal mechanisms of a useful tool is disturbing, not only as an intellectual challenge, but because it raises the doubt of whether it will work in all cases. This note is an attempt to clarify those mechanisms. We will see why dynamic models are robust and how they can get away with even comparatively gross errors in their formulations. This will suggest that they are only particular cases of a larger family of robust models, all of which would be relatively insensitive to large simplifications in the physics of the flow. We will also construct some such models, although mostly as research tools. It will turn out, however, that the standard dynamic formulation is not only robust to errors, but also behaves as if it were substantially well formulated. The details of why this is so will still not be clear at the end of this note, specially since it will be shown that the 'a priori' testing of the stresses gives, as is usual in most subgrid models, very poor results. But it will be argued that the basic reason is that the dynamic formulation mimics the condition that the total dissipation is approximately equal to the production measured at the test filter level.

Jimenez, J.↗
NASA NTRS1996

Hypercars: The next industrial revolution

The auto industry -- one-seventh of the GNP, and the highest expression of the Iron Age -- is about to trigger the biggest transformation in industrial structure since the microchip. Ultralight cars molded from net-shape advanced composites can be several-fold lighter than present steel cars, yet safer, sportier, and more comfortable, durable, and beautiful. Modern hybrid-electric drives boost efficiency approximately 1.3-1.5x in heavy steel cars, but approximately 5-20x in ultralight, very slippery plafforms. Synergistically combined into ultralight-hybrid 'hypercars,' these elements can yield state-of-the-shelf family cars that average 150-300+ mi/gal -- twice that with state-of-the-art technologies -- yet can also be superior in all other respects, probably including cost: carbon-fiber monocoques can actually be cheaper to mass-produce that steel unibodies. Designing cars more like aircraft and less like tanks requires not only an approximately 400-500 kg curb mass and very low air and road drag, but also an aerospace philosophy of engineering integration. Mass, cost, and complexity turn out to compound with heavy hybrids but to decompound with ultralight hybrids, owing partly to radical simplification. Excellent aerodynamics, preferable including advanced techniques for passive boundary-layer control, will be the key to successful design integration. Transforming automaking is a competitive and environmental imperative, could form the nucleus of a green industrial Renaissance, and would enhance national security by, among other things, saving as much oil as OPEC now extracts. However, this transformation faces serious cultural barriers. For example, hypercars will be more like computers with wheels than like cars with chips -- they'll have an order of magnitude more code than today's cars -- but Detroit is not a software culture. Just the transition from stamped and welded steel to integrated and adhesive-joined synthetics is difficult enough. Nonetheless, hypercars are rapidly heading to market in the late 1990s, because approximately 25 current and intending automakers are eager to capture their potentially decisive competitive advantages -- including order-of-magnitude reductions in product cycle time, tooling cost, assembly effort, and parts count. Hypercars will succeed, and may well sweep the market, not because of mandates or subsidies, but because of manufacturers' quest for competitive advantage and customers' desire for better, smarter cars.

Lovins, Amory B.↗
NASA NTRS1996

Miniature rotary actuator

The trend toward smaller satellites has challenged component manufacturers to reduce the size, weight, and cost of their products while maintaining high performance. Both a new stepper motor and a new harmonic drive were developed to meet this need. The resulting actuator embodies small angle stepper technology usually reserved for larger units and incorporates an integral approach to harmonic drive design. By product simplifications, costs were significantly reduced over prior designs.

Fink, R. A.↗
NASA NTRS1995

Learning In networks

Intelligent systems require software incorporating probabilistic reasoning, and often times learning. Networks provide a framework and methodology for creating this kind of software. This paper introduces network models based on chain graphs with deterministic nodes. Chain graphs are defined as a hierarchical combination of Bayesian and Markov networks. To model learning, plates on chain graphs are introduced to model independent samples. The paper concludes by discussing various operations that can be performed on chain graphs with plates as a simplification process or to generate learning algorithms.

Buntine, Wray L.↗
NASA NTRS1996

CFD Analysis of the 24-inch JIRAD Hybrid Rocket Motor

A series of multispecies, multiphase computational fluid dynamics (CFD) analyses of the 24-inch diameter joint government industry industrial research and development (JIRAD) hybrid rocket motor is described. The 24-inch JIRAD hybrid motor operates by injection of liquid oxygen (LOX) into a vaporization plenum chamber upstream of ports in the hydroxyl-terminated polybutadiene (HTPB) solid fuel. The injector spray pattern had a strong influence on combustion stability of the JIRAD motor so a CFD study was initiated to define the injector end flow field under different oxidizer spray patterns and operating conditions. By using CFD to gain a clear picture of the flow field and temperature distribution within the JIRAD motor, it is hoped that the fundamental mechanisms of hybrid combustion instability may be identified and then suppressed by simple alterations to the oxidizer injection parameters such as injection angle and velocity. The simulations in this study were carried out using the General Algorithm for Analysis of Combustion SYstems (GALACSY) multiphase combustion codes. GALACSY consists of a comprehensive set of droplet dynamic submodels (atomization, evaporation, etc.) and a computationally efficient hydrocarbon chemistry package built around a robust Navier-Stokes solver optimized for low Mach number flows. Lagrangian tracking of dispersed particles describes a closely coupled spray phase. The CFD cases described in this paper represent various levels of simplification of the problem. They include: (A) gaseous oxygen with combusting fuel vapor blowing off the walls at various oxidizer injection angles and velocities, (B) gaseous oxygen with combusting fuel vapor blowing off the walls, and (C) liquid oxygen with combusting fuel vapor blowing off the walls. The study used an axisymmetric model and the results indicate that the injector design significantly effects the flow field in the injector end of the motor. Markedly different recirculation patterns are observed in the vaporization chamber as the oxygen velocity and/or spray pattern is varied. The ability of these recirculation patterns to stabilize the diffusion flame above the surface of the solid fuel gives a plausible explanation for the experimentally determined combustion stability characteristics of the JIRAD motor, and suggests how combustion stability can be assured by modifications to the injector design.

Liang, Pak-Yan↗
NASA NTRS1996

Active and Passive Damping of Vibration for Rotorcraft Applications

Advanced helicopter rotor systems, such as those proposed for military rotorcraft in the near future, are mechanically less complex than traditional rotor systems. This simplification may lead to problems with both air and ground resonance. Damping can be a major stabilizing influence for these conditions, and a method of introducing damping in the flexbeam would allow for greater aeromechanical stability. Distributed and point damping strategies are currently being investigated to this end.

Wereley, Norman M.↗
NASA NTRS1994

Vorticity and Vertical Motions Diagnosed from Satellite Deep-Layer Temperatures

Spatial fields of satellite-measured deep-layer temperatures are examined in the context of quasigeostrophic theory. It is found that midtropospheric geostrophic vorticity and quasigeostrophic vertical motions can be diagnosed from microwave temperature measurements of only two deep layers. The lower- ( 1000-400 hPa) and upper- (400-50 hPa) layer temperatures are estimated from limb-corrected TIROS-N Microwave Sounding Units (MSU) channel 2 and 3 data, spatial fields of which can be used to estimate the midtropospheric thermal wind and geostrophic vorticity fields. Together with Trenberth's simplification of the quasigeostrophic omega equation, these two quantities can be then used to estimate the geostrophic vorticity advection by the thermal wind, which is related to the quasigeostrophic vertical velocity in the midtroposphere. Critical to the technique is the observation that geostrophic vorticity fields calculated from the channel 3 temperature features are very similar to those calculated from traditional, 'bottom-up' integrated height fields from radiosonde data. This suggests a lack of cyclone-scale height features near the top of the channel 3 weighting function, making the channel 3 cyclone-scale 'thickness' features approximately the same as height features near the bottom of the weighting function. Thus, the MSU data provide observational validation of the LID (level of insignificant dynamics) assumption of Hirshberg and Fritsch.

Spencer, Roy W.↗
NASA NTRS1996

Application of computational aero-acoustics to real world problems

The application of computational aeroacoustics (CAA) to real problems is discussed in relation to the analysis performed with the aim of assessing the application of the various techniques. It is considered that the applications are limited by the inability of the computational resources to resolve the large range of scales involved in high Reynolds number flows. Possible simplifications are discussed. It is considered that problems remain to be solved in relation to the efficient use of the power of parallel computers and in the development of turbulent modeling schemes. The goal of CAA is stated as being the implementation of acoustic design studies on a computer terminal with reasonable run times.

Hardin, Jay C.↗
NASA NTRS1996

Free-Surface and Contact Line Motion of Liquid in Microgravity

This project involves fundamental studies of the role of nonlinearity in determining the motion of liquid masses under the principal influences of surface tension, viscosity and inertia. Issues to be explored are relevant to aspects of terrestrial processes, as well as being immediately applicable to fluid management in a low-gravity environment. Specific issues include: (1) the mechanic's of liquid masses in large-amplitude motions, (2) the influence of bounding surfaces on the motion, and (3) the ability of such surfaces to control liquid motion by wetting forces, especially when they are augmented by various surface treatments. Mathematical techniques include asymptotic analysis of the governing equations, for problem simplification, and numerical simulation, using both boundary-element and finite-difference methods. The flow problem is divided into an 'outer' or inviscid potential-flow region and one or more inner, or viscous dominated, regions. Relevant to one inner region, the vicinity of the contact line, we discuss time-dependent simulation of slow droplet motion, on a surface of variable wettability, using the lubrication approximation. The simulation uses a disjoining pressure model and reproduces realistic wetting-dewetting behavior.

Schwartz, Leonard W.↗
NASA NTRS1996

Review of Godunov Methods

In this paper, second order Godunov methods are reviewed. The early versions by Colella and Woodward (PPM) and van Leer (MUSCL) are described in their original form. The simplification of these by Roe, based on approximate Riemann solver, is then presented. Attention is next given to the improvement in MUSCL due to Hancock and van Leer leading to a fuller paper by Huynh. Finally, brief reference is made to TVD and ENO schemes due to Harten.

Holt, Maurice↗
NASA NTRS1996

Self-Consistent Simulation of the Brownian Stage of Dust Growth

It is a widely accepted view that in proto-planetary accretion disks the collision and following sticking of dust particles embedded in the gas eventually leads to the formation of planetesimals (coagulation). For the smallest dust grains, Brownian motion is assumed to be the dominant source of their relative velocities leading to collisions between these dust grains. As the dust grains grow they eventually couple to the turbulent motion of the gas which then drives the coagulation much more efficiently. Many numerical coagulation simulations have been carried out to calculate the fractal dimension of the aggregates, which determines the duration of the ineffective Brownian stage of growth. Predominantly on-lattice and off-lattice methods were used. However, both methods require simplification of the astrophysical conditions. The aggregates found by those methods had a fractal dimension of approximately 2 which is equivalent to a constant, mass-independent friction time. If this value were valid for the conditions in an accretion disk, this would mean that the coagulation process would finally 'freeze out' and the growth of a planetesimal would be impossible within the lifetime of an accretion disk. In order to investigate whether this fractal dimension is model independent, we simulate self-consistently the Brownian stage of the coagulation by an N-particle code. This method has the advantage that no further assumptions about homogeneity of the dust have to be made. In our model, the dust grains are considered as aggregates built up of spheres. The equation of motion of the dust grains is based on the probability density for the diffusive transport within the gas atmosphere. Because of the very low number density of the dust grains, only 2-body-collisions have to be considered. As the Brownian stage of growth is very inefficient, the system is to be simulated over long periods of time. In order to find close particle pairs of the system which are most likely to undergo a collision, we use a particle-in-cell (PIC) method for the early stages of the simulation where the system is still very homogeneous and a tree method later when the particles are more clustered.

Kempf, S.↗
NASA NTRS1996

On the Generation of Turbulent Inflow Conditions for Boundary Layer Simulations

Turbulent flows that exhibit inhomogeneities in the streamwise direction pose a particular challenge to numerical simulation approaches due to the need to prescribe time-dependent turbulent inflow conditions. In most cases the flow downstream is more or less 'driven' by the conditions at the inlet, making it necessary to specify realistic turbulent fluctuations that are in equilibrium with the assumed mean flow. This requirement often dictates that the inflow data should satisfy the Navier-Stokes equations, which in turn implies that an independent simulation be used to generate them. Detailed simulations for the purpose of creating inflow conditions can be costly and thus certain levels of approximation are desirable. In this paper we shall focus on an approximate yet accurate method for generating inflow conditions for spatially-developing boundary layer simulations. The proposed method is essentially a simplification of the method of Spalart and Leonard (1985), who devised an ingenious transformation that allows for the calculation of spatially evolving boundary layers in conjunction with periodic boundary conditions applied in the streamwise direction. While this method is elegant and highly accurate, it is more complicated than is necessary for the purpose of generating inflow data. A few key approximations are used in this work to arrive at a 'modified Spalart method' that is very easy to implement and efficient to use. The new method is shown to yield results that compare well with the computations of Spalart (1988). When used as a means of generating inflow data, the modified Spalart method is shown to be superior to existing approaches.

Lund, T. S.↗