Search NASA⌕ Search

SEARCH · Search NASA

Results for “solution processability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Dopants, Isotope, Pressure and Lead Sequestration for Hybrid Perovskite Materials

Dopants, Isotope, Pressure and Lead Sequestration for Hybrid Perovskite Materials The soaring power conversion efficiency (PCE) of solution process-based organic-inorganic hybrid perovskites solar cells (PSCs) assures their membership in the competitive photovoltaic technologies. However, stability, toxicity and scalability are the three grand challenges that still impedes the market adoption of PSCs. Careful fundamental studies on how their fascinating optoelectronic properties is related to their structures may provide leads to these challenges and also spin off new applications. In this talk, I will present our recent study on the dopants, isotope and pressure effects on hybrid perovskite materials (HPMs). We discovered an interesting bipolar electron injection in LiCl-doped MAPbI 3 -based UV detectors that respond to the energy of UV photons in distinguished photocurrents polarity. We also investigated how the underline interaction between the mass of the cationic rotors and the inorganic lattice in HPMs by isotope effect. In-situ synchrotron X-ray and time-resolved photoluminescence revealed abnormal optoelectronic properties of HPMs by modulating their bond angles and bond lengths using high pressure techniques. Moreover, I will also discuss our new technology to sequestrate lead leakage on perovskite solar cells that can absorb >99% leaked Pb ions under severe device damge while without sacrificing the PCE under normal operational conditions.

Xu, Tao↗
DOE OSTI2019

Production and Characterization Package of Reference and Advanced Feedstock

This milestone report summarizes the synthesis routes used to produce ceramic nuclear fuel feedstock at Oak Ridge National Laboratory (ORNL). The solution-gelation process is used to fabricate microspheres, which are then converted to ceramic fuel materials using various processing conditions. Resulting fuel materials include uranium dioxide (UO 2 ), uranium monocarbide (UC), and uranium mononitride (UN). The microsphere size distribution, density, and composition of the fuels can be altered using the conversion routes defined in this report. The resulting materials can be used as the feedstock in a number of additive manufacturing (AM) processes. The present materials were prepared using depleted or natural uranium to facilitate exploratory development activities. However, the laboratories used for this work are authorized for enriched uranium and are actively utilized for this purpose to fabricate fuel test articles for irradiation. If desired, the techniques demonstrated in this document can be readily used for enriched material production to support the Transformational Challenge Reactor (TCR) program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Research Plan and Preliminary Results in Developing the Fabrication Parameters for Alloy 709 in Different Product Forms―Grain Coarsening Temperature Evaluation

The Advanced Reactor Technologies (ART) Program has established a multi-year plan to develop Alloy 709 advanced stainless steel (A709), generate the data package and develop material-specific design parameters in qualifying it as a new structural material for Class A component design in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section III, Division 5, High Temperature Reactors. In collaboration with material vendors, the Advanced Materials Development activities under ART have successfully scaled the A709 plate form production from a laboratory heat of 500 pounds to commercial heats totaling 133,000 pounds of A709 plate fabricated from three heats. The goal of the overall A709 development program is to establish the necessary microstructural and mechanical properties relationship for A709 to ultimately develop fabrication parameters for other product forms such as bars, piping and forging using the available ART A709 materials. The objective of this A709 development work at ORNL in FY2023 is to experimentally determine grain coarsening behavior for the A709 heats and to experimentally generate the continuous cooling precipitation (CCP) diagram for A709 using the as-rolled commercial heat plate materials. Integral to this work is the characterization of the as-rolled materials and the determination of an effective solution annealing process. This report summarizes the work performed to identify the grain coarsening temperature for commercial heat 58776-3RB fabricated by G. O. Carlson and heat 529900-02 fabricated by Allegheny Technologies Incorporated (ATI) Flat Rolled Products.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Transformative Manufacturing of Adaptive Wire Feedstocks with Atomic Layer Deposition of Nb 2 O 5 onto Depleted Uranium [Slides]

Project Motivation: Uranium corrosion susceptible and highly catalytic; Exposure thickens oxide impacting material performance. This worsens with time; Sigma is uniquely positioned to tackle R&D challenges with Uranium processing. Possible Solutions: 1) Make new material for each weld. Occupational exposure, difficult to align resources ; 2) Coatings? Coating adds foreign material: can this be minimized?

36 MATERIALS SCIENCE↗
DOE OSTI2024

Progressive Hedging Decomposition for Solutions of Large-Scale Process Family Design Problems

In previous work, we have introduced a mathematical model for solving a discretized version of the process family design problem. This involves two sets of decision variables. One set selects which unit module designs are included in the process platform out of a candidate set of options; the other set determines which of these unit module designs are assigned to each variant. In this work, we exploit a parallelized Progressive Hedging (PH) algorithm to solve even larger scale design problems. PH is a well-known algorithm traditionally used to solve stochastic programming problems. While our problem is not a two-stage stochastic programming problem, the structure is similar, and it can be directly mapped to the PH approach, which we employ here to solve this deterministic optimization problem. We decompose our problem by process variant. We treat the platform unit module design variables as first-stage and the assignment of unit module designs to variants as second-stage, solving the problem using mpi-sppy. We demonstrate this approach on case studies of CC, water desalination, and refrigeration.

Stinchfield, Georgia↗
DOE OSTI2025

High-Fidelity, Large-Scale, Realistic Dataset Development

The final report summarizes the work performed for supporting the ARPA-E Grid Optimization Competition (Challenge 2 and Challenge 3) within the stated period. Challenge 2 For the challenge period, the main responsibility of the team is to investigate, gen- erate, and deliver parts of the data sets for the competition, based on the competition model for Challenge 2, existing data sets from Challenge 1, and data source supplied by other data set teams. Challenge 3 For the challenge period, the main responsibility of the team is to propose, create, deliver, and maintain the data format during the competition period. The data format will specify how the benchmark data will be represented and communicated to competitors. It will also specify how competitors should report back the solutions. The data format will be closely aligned with the problem formulation (maintained by the formulation team) and the solution validation process (maintained by the validation team). Our team is also responsible in investigating, generating, and delivering parts of the data sets for the competition. The data sets will be created based on the competition model for Challenge 3, existing data sets from Challenge 1 and Challenge 2, and data source supplied by other data set teams.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Electrochemical Production of Calcium Hydroxide from Calcium Carbonate

Calcium hydroxide is electrochemically synthesized to address SRNL core competency of Creating Manufacturing & Energy Solutions. This process is energy efficient compared to high temperature calcium carbonate decomposition to produce calcium oxide for the cement industry. Ultrasonic dehydration coupled with induction heating can further reduce the energy need for cement production.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Low-Temperature Plasma-Based Metrology of Lithium-Ion Battery Electrode Materials (CRADA Final Report)

As part of the Cyclotron Road program, SirenOpt Inc. evaluated its low-temperature plasma-based metrology sensor prototype for measuring multiple critical properties of lithium-ion battery electrode materials in parallel and in real-time. Cost-effective, minimal-waste manufacturing of high-performance battery electrode materials will be vital for achieving society’s net-zero carbon emission goals. Because existing electrode metrology sensors cannot operate within most sections of manufacturing lines, manufacturers often complete hundreds of processing steps before they can test their products and detect problems. When manufacturers perform these offline tests, they typically only test a small portion of the manufactured products. Current electrode manufacturing thus often yields many low-quality products, or off-spec products that must be thrown away all together. For example, at least 6% of the total lithium-ion battery manufacturing cost (i.e., over $250 million/year for the average gigafactory) is devoted to processing defective electrodes that are not scrapped until performance tests are failed during late-stage quality control checks. Electrode variability also leads manufacturers to build extra cells into battery packs to reduce the risk of poor performance. For example, many electric vehicle (EV) manufacturers include up to 10% more cells than needed, which substantially increases the cost and weight of the final EV product. The SirenOpt sensor can potentially enable early detection of poorly manufactured electrodes and allow them to be removed earlier from manufacturing lines, which can save battery manufacturers (hundreds of) millions of dollars per year. The sensor can further be used to improve product quality by accelerating R&D and process optimization, improving quality control, and enabling real-time process control. Overall, a real-time, in-situ metrology strategy can create unprecedented opportunities for implementation of smart manufacturing practices and advanced quality and process control solutions to realize higher battery electrode throughput and performance.

25 ENERGY STORAGE↗
DOE OSTI2019

DCMIP2016: the splitting supercell test case

Abstract. This paper describes the splitting supercell idealized test case used in the 2016 Dynamical Core Model Intercomparison Project (DCMIP2016). These storms are useful test beds for global atmospheric models because the horizontal scale of convective plumes is O(1 km), emphasizing non-hydrostatic dynamics. The test case simulates a supercell on a reduced-radius sphere with nominal resolutions ranging from 4 to 0.5 km and is based on the work of Klemp et al. (2015). Models are initialized with an atmospheric environment conducive to supercell formation and forced with a small thermal perturbation. A simplified Kessler microphysics scheme is coupled to the dynamical core to represent moist processes. Reference solutions for DCMIP2016 models are presented. Storm evolution is broadly similar between models, although differences in the final solution exist. These differences are hypothesized to result from different numerical discretizations, physics–dynamics coupling, and numerical diffusion. Intramodel solutions generally converge as models approach 0.5 km resolution, although exploratory simulations at 0.25 km imply some dynamical cores require more refinement to fully converge. These results can be used as a reference for future dynamical core evaluation, particularly with the development of non-hydrostatic global models intended to be used in convective-permitting regimes.

Zarzycki, Colin M.↗
DOE OSTI2018

Methods and apparatus concerning solution shearing a transparent and conductive polymer film

Various embodiments include apparatus and methods of forming an apparatus using a solution shearing process. An example method includes providing a shearing blade on a portion of a substrate coated with a polymeric conductor material and controlling generation of a transparent and conductive polymer film on the substrate by moving the shearing blade in a direction, to generate shear stress to the polymeric conductor material, and according to shearing deposition parameters.

Bao, Zhenan↗
DOE OSTI2019

Surface doping of nanostructures

This disclosure provides systems, methods, and apparatus related to surface doping of nanostructures. In one aspect a plurality of nanostructures is fabricated with a solution-based process using a solvent. The plurality of nanostructures comprises a semiconductor. Each of the plurality of nanostructures has a surface with capping species attached to the surface. The plurality of nanostructures is mixed in the solvent with a dopant compound that includes doping species. During the mixing the capping species on the surfaces of the plurality of nanostructures are replaced by the doping species. Charge carriers are transferred between the doping species and the plurality of nanostructures.

Sahu, Ayaskanta↗
DOE OSTI2019

Substituted lead halide perovskite intermediate band absorbers

Lead halide perovskites have proven to be a versatile class of visible light absorbers that allow rapid access to the long minority carrier lifetimes and diffusion lengths desirable for traditional single-junction photovoltaics. Computational screening identified both Fe- and Co-substituted MAPbBr3 as promising intermediate band candidate materials, and the later films were synthesized via conventional solution-based processing techniques. First-principles density functional theory (DFT) calculations support the existence of intermediate bands upon Co incorporation and enhanced sub-gap absorption, which are confirmed by UV-visible-NIR absorption spectroscopy. The simple tenability combined with steady state and time-resolved PL studies that reveal no sign of self-quenching suggest this class of materials to be promising for intermediate band photovoltaics.

Sampson, Matthew D.↗
DOE OSTI2020

System and method for forming material substrate printer

A method is disclosed for manufacturing a part via an additive manufacturing process. A solution is used which has a volatile component within which is suspended particles of a powdered material. The solution is heated until it at least one of begins boiling or is about to begin boiling. The heated solution is then deposited at least at one location on a substrate to help form a layer of the part. The volatile component then evaporates, leaving only the particles of powdered material. The particles are then heated to the melting point. The deposition and heating operations are repeated to successively form a plurality of layers for the part. The evaporation of the volatile component helps to cool the part.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Carbon material supported hollow metal oxide nanoparticles, methods and applications

A method for preparing a material composition comprising a hollow transition metal oxide nanoparticle supported upon a carbon material support includes a solution impregnation process step, followed by a thermal reduction process step and finally a thermal oxidation process step. The material composition, an electrode and an electrical component such as but not limited to a battery are all predicated at least in-part upon the material composition prepared in accord with the foregoing method. The foregoing material composition, electrode, battery and method may ultimately provide a LIB with enhanced performance.

Yu, Yingchao↗
DOE OSTI2022

Separation of rare earth elements using supported membrane solvent extraction

A system and method for the recovery and separation of rare earth elements (REEs) are provided. The system and method include the supported membrane solvent extraction of REEs and the separation of light and heavy REEs that have been recovered from scrap permanent magnets and other electronic waste. In supported membrane solvent extraction, an organic phase consisting of an extractant and an organic solvent is immobilized in the pores of hollow fibers. An aqueous feed solution and a strip solution flow along the shell side and lumen side of the hollow fibers, respectively. The extractant functions as a carrier to selectively transport certain rare earth metal ions from the feed side to the strip side. The rare earth metals are concurrently back extracted in the strip solution, allowing processing to proceed continuously without equilibrium limitations.

Bhave, Ramesh R.↗
DOE OSTI2022

System and method for forming material substrate printer

A method is disclosed for manufacturing a part via an additive manufacturing process. A solution is used which has a volatile component within which is suspended particles of a powdered material. The solution is heated until it at least one of begins boiling or is about to begin boiling. The heated solution is then deposited at least at one location on a substrate to help form a layer of the part. The volatile component then evaporates, leaving only the particles of powdered material. The particles are then heated to the melting point. The deposition and heating operations are repeated to successively form a plurality of layers for the part. The evaporation of the volatile component helps to cool the part.

Demuth, James A.↗