Search NASA⌕ Search

SEARCH · Search NASA

Results for “space observatory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Challenges with Electrical, Electronics, and Electromechanical Parts for James Webb Space Telescope

James Webb Space Telescope (JWST) is the space-based observatory that will extend the knowledge gained by the Hubble Space Telescope (HST). Hubble focuses on optical and ultraviolet wavelengths while JWST focuses on the infrared portion of the electromagnetic spectrum, to see the earliest stars and galaxies that formed in the Universe and to look deep into nearby dust clouds to study the formation of stars and planets. JWST, which commenced creation in 1996, is scheduled to launch in 2018. It includes a suite of four instruments, the spacecraft bus, optical telescope element, Integrated Science Instrument Module (ISIM, the platform to hold the instruments), and a sunshield. The mass of JWST is approximately 6200 kg, including observatory, on-orbit consumables and launch vehicle adaptor. Many challenges were overcome while providing the electrical and electronic components for the Goddard Space Flight Center hardware builds. Other difficulties encountered included developing components to work at cryogenic temperatures, failures of electronic components during development and flight builds, Integration and Test electronic parts problems, and managing technical issues with international partners. This paper will present the context of JWST from a EEE (electrical, electronic, and electromechanical) perspective with examples of challenges and lessons learned throughout the design, development, and fabrication of JWST in cooperation with our associated partners including the Canadian Space Agency (CSA), the European Space Agency (ESA), Lockheed Martin and their respective associated partners. Technical challenges and lessons learned will be discussed.

EEE Parts↗

A Small Spacecraft Swarm Deployment and Stationkeeping Strategy for Sun-Earth L1 Halo Orbits

Spacecraft orbits about the Sun-Earth librarian point L1 have been of interest since the 1950s. An L1 halo orbit was first achieved with the International Sun-Earth Explorer-3 (ISEE-3) mission, and similar orbits around Sun-Earth L1 were achieved in the Solar and Heliospheric Observatory (SOHO), Advanced Composition Explorer (ACE), Genesis, and Deep Space Climate Observatory (DSCOVR) missions. With recent advancements in CubeSat technology, we envision that it will soon be feasible to deploy CubeSats at L1. As opposed to these prior missions where one large satellite orbited alone, a swarm of CubeSats at L1 would enable novel science data return, providing a topology for intersatellite measurements of heliophysics phenomena both spatially and temporally, at varying spatial scales.The purpose of this iPoster is to present a flight dynamics strategy for a swarm of numerous CubeSats orbiting Sun-Earth L1. The presented method is a coupled, two-part solution. First, we present a deployment strategy for theCubeSats that is optimized to produce prescribed, time-varying intersatellite baselines for the purposes of collectingmagnetometer data as well as radiometric measurements from cross-links. Second, we employ a loose controlstrategy that was successfully applied to SOHO and ACE for minimized stationkeeping propellant expenditure. Weemphasize that the presented solution is practical within the current state-of-the-art and heritage CubeSat technology,citing capabilities of CubeSat designs that will launch on the upcoming Exploration Mission 1 (EM-1) to lunar orbitsand beyond. Within this iPoster, we present animations of the simulated deployment strategy and resulting spacecrafttrajectories. Mission design parameters such as total v required for long-term station keeping andminimum/maximum/mean spacecraft separation distances are also presented.

Optimal control↗

CALISTO: A Cryogenic Far-Infrared/Submillimeter Observatory

We present a design for a cryogenically cooled large aperture telescope for far-infrared astronomy in the wavelength range 30 micrometers to 300 micrometers. The Cryogenic Aperture Large Infrared Space Telescope Observatory, or CALISTO, is based on an off-axis Gregorian telescope having a 4 m by 6 m primary reflector. This can be launched using an Atlas V 511, with the only optical deployment required being a simple hinged rotation of the secondary reflector. The off-axis design, which includes a cold stop, offers exceptionally good performance in terms of high efficiency and minimum coupling of radiation incident from angles far off the direction of maximum response. This means that strong astronomical sources, such as the Milky Way and zodiacal dust in the plane of the solar system, add very little to the background. The entire optical system is cooled to 4 K to make its emission less than even this low level of astronomical emission. Assuming that detector technology can be improved to the point where detector noise is less than that of the astronomical background, we anticipate unprecedented low values of system noise equivalent power, in the vicinity of 10(exp -19) WHz(exp -0.5), through CALISTO's operating range. This will enable a variety of new astronomical investigations ranging from studies of objects in the outer solar system to tracing the evolution of galaxies in the universe throughout cosmic time.

Cryogenic Aperture Large Infrared Space Telescope ↗

Fringing Analysis and Simulation for the Vera C. Rubin Observatory’s Legacy Survey of Space and Time

Abstract The presence of fringing in astronomical Charge-Coupled Device (CCD) images will have an impact on photometric quality and measurements. Yet its impact on the Vera C. Rubin Observatory’s Legacy Survey of Space and Time (LSST) has not been fully studied. We present a detailed study on fringing for CCDs already implemented on the Rubin Observatory LSST Camera’s focal plane. After making physical measurements and knowing the compositions, we developed a model for the e2v CCDs. We present a method to fit for the internal height variation of the epoxy layer within the sensors based on fringing measurements in a laboratory setting. This method is generic enough that it can be easily modified to work for other CCDs. Using the derived fringing model, we successfully reproduce comparable fringing amplitudes that match the observed levels in images taken by existing telescopes with different optical designs. This model is then used to forecast the expected level of fringing in a single LSST y -band sky background exposure with Rubin telescope optics in the presence of a realistic time-varying sky spectrum. The predicted fringing amplitude in LSST images ranges from 0.04% to 0.2% depending on the location of a CCD on the focal plane. We find that the predicted variation in surface brightness caused by fringing in LSST y -band sky background images is about 0.6 μ Jy arcsec − 2 , which is 40 times larger than the current measurement error. We conclude that it is necessary to include fringing correction in the Rubin’s LSST image processing pipeline.

Astronomy & Astrophysics↗

An antenna for laser gravitational-wave observations in space

Progress during the past two years on a proposed Laser Gravitational-Wave Observatory in Space (LAGOS) is discussed. Calculated performance for a 10 to the 6th km sized antenna over the frequency range of 10 to the -5th to 1 Hz is given. The sensitivity from 0.001 to 0.1 Hz is expected to be 1 x 10 to the -21st/Hz exp 0.5. Noise sources such as accelerations of the drag-free test masses by random molecular impacts and by fluctuations in the net thermal radiation pressure will limit the sensitivity at lower frequencies. The scientific objectives are the observation of CW gravitational waves from large numbers of binary systems and the detection of pulses which may have been emitted during the period of galaxy formation.

Faller, J. E.↗

Delving into the depths of NGC 3783 with XRISM

Using XRISM/Resolve 439 ks time-averaged spectra of the well-known Seyfert-1.5 active galactic nucleus (AGN) in NGC 3783, we investigated the nature of the Fe Kα emission line at 6.4 keV, the strongest and most common X-ray line observed in AGNs. Even the narrow component of the line is resolved with evident Fe Kα 1 (6.404 keV) and Kα 2 (6.391 keV) contributions with a 2:1 flux ratio, fully consistent with a neutral gas with negligible bulk velocity. The narrow and intermediate-width components have a full width at half maximum of 350 ± 50 km/s and 3510 ± 470 km/s, respectively, suggesting that they arise in the outer disk/torus and/or broad line region. We detect a 10% excess flux around 4–7 keV that is not described well by a symmetric Gaussian line but is consistent with a relativistically broadened emission line. In this study we took the simplest approach, modelling the asymmetric line as a single emission line (assuming neutral, He-like, or H-like iron) convolved with a relativistic disk line model. As expected, the inferred inclination angle (i) is highly sensitive to the assumed ionisation state and ranges between 17 and 44°. This model also constrains the black hole spin via the extent of the red wing: the required gravitational redshift in the fitted disk-line profile disfavours a non-spinning (Schwarzschild) black hole. The derived inner radius is close to the radius of the innermost stable circular orbit (rISCO) and is strongly correlated with the black hole spin. To better constrain the spin, we fixed the inner radius to r ISCO and derived a lower limit on the spin of a ≥ 0.29 at the 3σ confidence level. A Compton shoulder is detected in our data as well as a 2–3σ detection of the Cr Kα and Ni Kα lines.

Astronomy and AstroPhysics↗

Space station needs, attributes and architectural options. Part 1: Summary

Candidate missions for the space station were subjected to an evaluation/filtering process which included the application of budgetary constraints and performance of benefits analysis. Results show that the initial space station should be manned, placed in a 28.5 deg orbit, and provide capabilities which include a space test facility, satellite service, a transport harbor, and an observatory. A space industrial park may be added once further development effort validates the cost and expanding commercial market for space-processed material. Using the space station as a national space test facility can enhance national security, as well as commercial and scientific interests alike. The potential accrued gross mission model benefit derived from these capabilities is $5.9B without the industrial park, and $9.3B with it. Other benefits include the lowering of acquisition costs for NASA and DoD space assets and a basis for broadening international participation.

Source record↗

Space Infrared Telescope Facility (SIRTF) telescope overview

The Space Infrared Telescope Facility (SIRTF) will be the first true infrared observatory in space, building upon the technical and scientific experience gained through its two NASA survey-oriented predecessors: the Infrared Astronomical Satellite and the Cosmic Background Explorer. During its minimum five year lifetime, the SIRTF will perform pointed scientific observations at wavelengths from 1.8 to 1200 microns with an increase in sensitivity over previous missions of several orders of magnitude. This paper discusses a candidate design for the SIRTF telescope, encompassing optics, cryostat, and instrument accommodation, which has been undertaken to provide a fulcrum for the development of functional requirements, interface definition, risk assessment and cost. The telescope optics employ a baffled Ritchey-Chretien Cassegrain system with a 1-m class primary mirror, an active secondary mirror, and a stationary facetted tertiary mirror. The optics are embedded in a large superfluid He cryostat designed to maintain the entire telescope-instrument system at temperatures below 3 K.

Schember, Helene↗

Implementation of the Solar Exclusion Zone Burn Through Maneuvers for DSCOVR to Preserve Fuel for the Gyro-less Spacecraft in a Sun-Earth L1 Lissajous Orbit

DSCOVR (Deep Space Climate Observatory) is a National Oceanic and Atmos-pheric Administration (NOAA) space weather, space climate, and Earth obser-vation satellite operating in a Sun-Earth L1 Lissajous orbit. This report summa-rizes the two-burn maneuver campaign performed in Summer 2021 to transfer DSCOVR from the collapsing phase into the expansion phase of the Lissajous orbit to avoid the Solar Exclusion Zone (SEZ). The two-maneuver campaign performed in July and August 2021 was successful and resulted in saving the mission 31 kilograms of fuel and 100 m/s of delta-v reserved for SEZ maneu-vers which are no longer required until 2026 or 2027.

DSCOVR↗

Possible Space-Based Gravitational-Wave Observatory Mission Concept

The existence of gravitational waves was established by the discovery of the Binary Pulsar PSR 1913+16 by Hulse and Taylor in 1974, for which they were awarded the 1983 Nobel Prize. However, it is the exploitation of these gravitational waves for the extraction of the astrophysical parameters of the sources that will open the first new astronomical window since the development of gamma ray telescopes in the 1970's and enable a new era of discovery and understanding of the Universe. Direct detection is expected in at least two frequency bands from the ground before the end of the decade with Advanced LIGO and Pulsar Timing Arrays. However, many of the most exciting sources will be continuously observable in the band from 0.1-100 mHz, accessible only from space due to seismic noise and gravity gradients in that band that disturb ground-based observatories. This poster will discuss a possible mission concept, Space-based Gravitational-wave Observatory (SGO-Mid) developed from the original Laser Interferometer Space Antenna (LISA) reference mission but updated to reduce risk and cost.

Livas, Jeffrey C.↗

Space station needs, attributes, and architectural options. Volume 1. Executive summary

The initial space station should be manned, placed in 28.5 deg orbit, and provide substantial economic, performance, and social benefits. The most beneficial space station capabilities include: a space test facility; a transport harbor; satellite servicing and assembly; and an observatory. A space industrial park could be added once further development effort validates the cost and expanding commercial market for space processed materials. The potential accrued gross mission model benefit derived from these capabilities is $5.9B without the industrial park, and $9.3B with it. An unclassified overview of all phases of the study is presented.

Pritchard, E. B.↗

Space Studies Board Annual Report, 2005

The National Academy of Sciences (NAS) was chartered by Congress, under the leadership of President Abraham Lincoln, to provide scientific and technical advice to the government of the United States. Over the years, the advisory program of the institution has expanded, leading to the establishment of the National Academy of Engineering (NAE) and the Institute of Medicine, and of the National Research Council (NRC), the operational arm of the National Academies. The original charter of the Space Science Board was established in June 1958, three months before NASA opened its doors. The Space Science Board and its successor, the Space Studies Board (SSB), have provided expert external and independent scientific and programmatic advice to NASA on a continuous basis from NASA's inception until the present. The Board has also provided such advice to other agencies, including the National Oceanic and Atmospheric Administration, the National Science Foundation, the U.S. Geological Survey, and the Department of Defense, and responds to requests from Congress. Early in 2005, the leadership of NASA changed, and with it new emphases emerged. Some of the early interpretations of the 2004 Vision for Space Exploration, in which only certain aspects of space science were encouraged, disappeared and a broader mandate for science emerged. But what also emerged was fiscal reality, which precluded many of the exciting activities that were planned for NASA's science programs. In this environment of change, there has been a continuing need to evaluate NASA's plans against the strategies for science that have been laid down in the various NRC decadal surveys, and to assist NASA in determining how best to proceed given the reduced level of resources it will have. Coupled with this has been a continuing need to provide Congress with the assessments of NASA's plans that it requests.

National Research Council (NRC)↗

Space Studies Board Annual Report, 2009

The year 2009 was one of transition for the nation, for NASA, and for the Space Studies Board (SSB). The nation pulled back from 2008's economic precipice, but did not return to the path of economic growth that it had been on. The United States inaugurated a new president who set out to build his administration. By mid-year President Obama had announced the appointment of Charlie Bolden as NASA administrator, and Lori Garver as deputy administrator. The president and Charlie Bolden jointly appointed an independent commission, the now well-known Augustine Commission, to provide guidance on the future of NASA's human spaceflight program. Many had known for quite a while that NASA's human spaceflight program faced a profound change at the time of the retirement of the space shuttle. This year was also a year of transition for the SSB. In 2009, Marcia Smith stepped down as staff director for both SSB and ASEB, and Dick Rowberg had a very good turn at the plate as a pinch-hitter. We are deeply indebted to both of them. We are pleased that, after a successful run as study director for Astro2010, Michael Moloney is now director of SSB and ASEB. The profound work begun in 2009 on the decadal surveys will only see the light of day later as they are released and the scientific work begins. The SSB will have much to report for 2010.

National Aeronautics and Space Administration(NASA↗

Evolution of Software-Only-Simulation at NASA IV and V

Software-Only-Simulations have been an emerging but quickly developing field of study throughout NASA. The NASA Independent Verification Validation (IVV) Independent Test Capability (ITC) team has been rapidly building a collection of simulators for a wide range of NASA missions. ITC specializes in full end-to-end simulations that enable developers, VV personnel, and operators to test-as-you-fly. In four years, the team has delivered a wide variety of spacecraft simulations that have ranged from low complexity science missions such as the Global Precipitation Management (GPM) satellite and the Deep Space Climate Observatory (DSCOVR), to the extremely complex missions such as the James Webb Space Telescope (JWST) and Space Launch System (SLS).This paper describes the evolution of ITCs technologies and processes that have been utilized to design, implement, and deploy end-to-end simulation environments for various NASA missions. A comparison of mission simulators are discussed with focus on technology and lessons learned in complexity, hardware modeling, and continuous integration. The paper also describes the methods for executing the missions unmodified flight software binaries (not cross-compiled) for verification and validation activities.

Embedded↗

Dynamic Emulation of NASA Missions for IVandV: A Case Study of JWST and SLS

Software-Only-Simulations are an emerging but quickly developing field of study throughout NASA. The NASA Independent Verification Validation (IVV) Independent Test Capability (ITC) team has been rapidly building a collection of simulators for a wide range of NASA missions. ITC specializes in full end-to-end simulations that enable developers, VV personnel, and operators to test-as-you-fly. In four years, the team has delivered a wide variety of spacecraft simulations ranging from low complexity science missions such as the Global Precipitation Management (GPM) satellite and the Deep Space Climate Observatory (DSCOVR), to the extremely complex missions such as the James Webb Space Telescope (JWST) and Space Launch System (SLS).

Emulation↗

Halley's comet 1985-86: space exploration

A coordinated program to explore Halley's comet in 1985 to 86 is proposed. The program employs a variety of observational systems for remote observations and utilizes spacecraft encounters with the comet to obtain in-situ measurements. Included in the observational network are groundbased observatories, the Space Telescope, a Spacelab cometary observatory, small astronomical satellites, and experiments carried on airborne observatories and sounding rockets. It is assumed that a ballistic flythrough technique will be used to carry out the spacecraft encounters. The proposed strategy calls for the simultaneous launch of two spacecraft towards an intercept with Halley in March 1986. Following the Halley encounter one spacecraft is retargeted to intercept comet Borrelly in January 1988, while the other spacecraft proceeds to an encounter with comet Tempel 2 in September 1988.

Farquhar, R. W.↗

Space-Based Gravitational-Wave Observatory (SGO) Mission Concept Study

The LISA Mission Concept has been under study for over two decades as a space-based gravitational-wave detector capable of observing astrophysical sources in the 0.0001 to 1 Hz band. The concept has consistently received strong recommendations from various review panels based on the expected science, most recently from the US Astr02010 Decadal Review. Budget constraints have led both the US and European Space agencies to search for lower cost options. We report results from the US effort to explore the tradeoffs between mission cost and science return.

Livas, Jeffrey↗

Unique Observational Constraints on the Seasonal and Longitudinal Variability of the Earth’s Planetary Albedo and Cloud Distribution Inferred From EPIC Measurements

Thorough comparison to observations is key to developing a credible climate model forecasting capability. Deep Space Climate Observatory (DSCOVR) measurements of Earth’s reflected solar and emitted thermal radiation provide a unique observational perspective that permits a more reliable model/data comparison than is possible with the otherwise available satellite data. The uniqueness is in the DSCOVR satellite’s viewing geometry, which enables continuous viewing of the Earth’s sunlit hemisphere from its Lissajous orbit around the Lagrangian L1 point. The key instrument is the Earth Polychromatic Imaging Camera (EPIC), which views the Earth’s sunlit hemisphere with 1024-by-1024-pixel imagery in 10 narrow spectral bands from 317 to 780 nm, acquiring up to 22 high spatial resolution images per day. The additional feature is that the frequency of EPIC image acquisition is nearly identical to that of the climate GCM data generation scheme where climate data for the entire globe are ‘instantaneously’ calculated at 1-h radiation time-step intervals. Implementation of the SHS (Sunlit Hemisphere Sampling) EPIC-view geometry for the in-line GCM output data sampling establishes a precise self-consistency in the space-time data sampling between EPIC observational and GCM output data generation and sampling. The remaining problem is that the GCM generated data are radiative fluxes, while the EPIC measurements are backscatter-dependent radiances. Radiance to flux conversion is a complex problem with no simple way to convert GCM radiative fluxes into spectral radiances. The more expedient approach is to convert the EPIC spectral radiances into broadband radiances by MODIS/CERES-based regression relationships and then into solar radiative fluxes using the CERES angular distribution models. Averaging over the sunlit hemisphere suppresses the meteorological weather noise, but preserves the intra-seasonal larger scale variability. Longitudinal slicing by the Earth’s rotation permits a self-consistent model/data comparison of the longitudinal model/data differences in the variability of the reflected solar radiation. Ancillary EPIC Composite data provide additional cloud property information for climate model diagnostics. Comparison of EPIC-derived seasonal and longitudinal variability of the Earth’s planetary albedo with the GISS ModelE2 results shows systematic overestimate of cloud reflectivity over the Pacific Ocean with corresponding underestimates over continental land areas.

DSCOVR↗