Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural ordering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Static structural tests of a 1.5-meter diameter fabric attached inflatable decelerator

Meridional tape forces, permeability, and change in model contours were measured on the aft half of a 1.5-m-diameter attached inflatable decelerator (AID). Inflation pressures up to 103 kN per square meter and external pressures of 0.14 to 102 kN per square meter were used. The results indicated that the model stresses were near the desired isotensoid condition. Future AID designs should consider both stiffness and strength of the meridional tapes to obtain the optimum division of load between tapes and fabric. Permeability of pressurized fabric structures is a few orders of magnitude higher than that obtained in the standard low-pressure test on material specimens.

Willis, C. M.↗
NASA NTRS1971

The estimation of the constituent densities of the upper atmosphere by means of a recursive filtering algorithm.

The structure of the upper atmosphere can be indirectly probed by light in order to determine the global density structure of ozone, aerosols, and neutral atmosphere. Scattered and directly transmitted light is measured by a satellite and is shown to be a nonlinear function of the state which is defined to be a point-wise decomposition of the density profiles. Dynamics are imposed on the state vector and a structured estimation problem is developed. The estimation of these densities is then performed using a linearized Kalman-Bucy filter and a linearized Kushner-Stratonovich filter.

Mcgarty, T. P.↗
NASA NTRS1974

Influence of ultrasounds on electrolytic polishing

On the basis of study of the electrolytic polishing of metal pieces, the following conclusions can be drawn: (1) Utilization of ultrasonically irradiated electrolytes in the electrolytic polishing of copper and steel pieces leads to enhanced polishing quality. (2) Polishing time for the reference pieces was twice as long as for the test pieces. (3) The chemical attack exerted on the surface of the test pieces in order to get the structure of the respective metal lasted less than half as long and yielded superior qualitative results in the copper as well as in the OT 60-2 steel test pieces polished with ultrasonically irradiated electrolytes. (4) The utilization of higher polishing current densities can be explained by the fact that the cavitational effect that arises in the electrolyte owing to ultrasounds contributes to an increase in the solution's electrical conductivity and elimination of gases from the electrolyte.

Gavrila, I.↗
NASA NTRS1974

Eutectic solidification

The possibilities of using the low-gravity space environment for the processing of directionally solidified materials in order to remove the limitations imposed by the L-g earth environment have led to a careful evaluation of the directional solidification process and the results commonly obtained. Defects in the regularity of the microstructure have been identified as one of the most important areas where present processing technology needs to be improved. One-g environment material processing must also be carefully characterized before it can be determined if zero-g processing will produce significant benefits in eutectic and off-eutectic solidification. It is suggested that a combination of experimental and analytical thermal studies will be required to optimize the solidification process in order to minimize the structural defects which occur due to present processing techniques.

Douglas, F. C.↗
NASA NTRS1977

Observations of intense velocity shear and associated electrostatic waves near an auroral arc

Simultaneous measurements of energetic particles and ac electric fields made by the javelin sounding rocket NASA 8:56 during the late expansion phase of a magnetic storm have revealed an intense shear in plasma flow of magnitude 20 (m/s)/m at the edge of an auroral arc. Structure with two characteristic scales sizes is displayed in the region of shear. Larger structures are of the order of several kilometers in size. Intense irregularities with characteristic wavelengths smaller than the scale size of the shear have also been detected. The large-scale changes in the orientation of the charge sheet at the edge of the arc may be due to the Kelvin-Helmholtz branch; shorter-wavelength modes may be related to the shear driven resistive drift wave. Observations are consistent with the suggestion that velocity shear instabilities may play a role in the formation of high-latitude irregularities.

Kelley, M. C.↗
NASA NTRS1977

Microwave absorption characteristics of the clouds of Venus from Mariner 10 radio occultation

Measurements of received signal strength at S-band (13 cm) and X-band (4.8 cm) wavelengths during the radio occultation of Mariner 10 by Venus on February 5, 1974, are examined in order to study the structure and composition of the absorbing medium. The frequency excursions of the signals are determined and used to obtain the structure of the refractive index in the lower atmosphere. Profiles of excess signal attenuation due to atmospheric scattering and absorption are presented which indicate that the X-band signal experienced much more absorption and was extinguished at about 50 km, while the S-band signal penetrated to about 42 km. The optical-depth data are inverted by means of a discrete inversion method to obtain the absorption coefficient for each band as a function of height, and the resulting absorption-coefficient profiles are compared with the attenuation at vertical incidence modeled from planetary radar and passive microwave observations of Venus. The absorption coefficients at the two wavelengths are employed to estimate the liquid content and composition of the microwave-absorbing cloud particles.

Kliore, A. J.↗
NASA NTRS1978

6 centimeter observations of solar bursts with 6-inch resolution

During May 1974 data were collected on nine 6-cm solar bursts originating in two active regions. One-dimensional fan-beam scans were obtained every 30 seconds in order to study burst structure and evolution. Maximum burst flux was in the 0.34-12.0 sfu range. At maximum intensity the estimated brightness temperatures were in the 10 to the 6th to 2 x 10 to the 7th K range. Angular sizes ranged from 7-23 arcsec. In most cases an expansion of the burst core after maximum intensity was observed along with a drift in the position of the burst core. Four bursts were associated important H-alpha flares, and in all cases burst maximum occurred before flare maximum. The bursts were circularly polarized in the extraordinary mode sense during maximum intensity. Since the polarization was the same over the extent of the burst source, it is suggested that if the burst is associated with loop sources, the emission is associated with one leg of the loop.

Alissandrakis, C. E.↗
NASA NTRS1979

SOFIP: A Short Orbital Flux Integration Program

A computer code was developed to evaluate the space radiation environment encountered by geocentric satellites. The Short Orbital Flux Integration Program (SOFIP) is a compact routine of modular compositions, designed mostly with structured programming techniques in order to provide core and time economy and ease of use. The program in its simplest form produces for a given input trajectory a composite integral orbital spectrum of either protons or electrons. Additional features are available separately or in combination with the inclusion of the corresponding (optional) modules. The code is described in detail, and the function and usage of the various modules are explained. A program listing and sample outputs are attached.

Stassinopoulos, E. G.↗
NASA NTRS1978

Large active retrodirective arrays for solar power satellites

An active retrodirective array (ARA) transmits a beam toward the apparent source of an illuminating signal called the pilot. The array produces the RF power. Retrodirectivity is achieved by retransmitting from each element of the array a signal whose phase is the 'conjugate' of that received by the element. Application of the ARA to the solar power satellite concept has been proposed. A method of providing a reference phase is described, called 'central phasing', which eliminates the need for a rigid structure ordinarily needed in order to realize accurate retrodirectivity.

Chernoff, R.↗
NASA NTRS1979

Characteristics of the wake of a lightly loaded compressor or fan rotor

An experimental investigation was carried out to evaluate the properties of the rotor fan or compressor wake in order to understand the structure of the wake. This included a study of profile shape, decay characteristics, effects of rotation, and effects of varying blade loading on the wake. Rotating tri-axial hot-wire probe measurements were reported which represent the first systematic data in the near wake region of the rotor wake using this technique. It is found that the radial, tangential, and axial components of mean velocities and turbulence intensities decay very rapidly near the rotor blade trailing edge, and that increased blade loading reduces the decay rates of axial and tangential mean velocity defects and radial velocities in the wake. In particular, the presence of an almost constant wake width region for increasing axial distance shows the effects of three-dimensionality on the rotor wake flow. Other conclusions are also given.

Reynolds, B. D.↗
NASA NTRS1980

On the security of the Merkle-Hellman cryptographic scheme

Cryptanalysis applied to a simple Merkle-Hellman (1978) public key cryptographic system (described within a standard-parameter knapsack problem) reveals the high vulnerability of the system. However, a cryptanalytic attack becomes ineffective when the knapsack problem with two or more iterations is used in order to obscure the structure of the superincreasing sequence. To enhance the security of a cryptographic system structured numbers can be used, while the multiple iterations of the modular multiplications technique can produce a safer Merkle-Hellman knapsack system.

Shamir, A.↗
NASA NTRS1980

Image processing of HCMM-satellite thermal images for superposition with other satellite imagery and topographic and thematic maps

The southwestern part of Central Europe between Basal and Frankfurt was used in a study to determine the accuracy with which a regionally bounded HCMM scene could be rectified with respect to a preassigned coordinate system. The scale to which excerpts from HCMM data can be sensibly enlarged and the question of how large natural structures must be in order to be identified in a satellite thermal image with the given resolution were also examined. Relief and forest and population distribution maps and a land use map derived from LANDSAT data were digitalized and adapted to a common reference system and then combined in a single multichannel data system. The control points for geometrical rectification were determined using the coordinates of the reference system. The multichannel scene was evaluated in several different manners such as the correlation of surface temperature and relief, surface temperature and land use, or surface temperature and built up areas.

Gossmann, H.↗
NASA NTRS1980

Mesoscale damage patterns of Hurricane Frederic in relation to enhanced SMS imagery

An F-scale analysis of Hurricane Frederic (September 12 and 13, 1979) was performed in order to determine the structural damage patterns attributed to the storm. Enhanced SMS imagery revealed patterns of mesoscale features as well as features related to the shielding effects of trees and the grouping effect of structures. The scatter in estimating the damage scale was + or - 1 F-scale. It is shown that discrepancies in recorded wind speed and the estimated wind-speed from the F-scale are the result of different damage mechanisms of hurricane and tornado winds. Radar echoes revealed that the structure of Hurricane Frederic changed from an axisymmetric center to an instantaneous center of rotation. Finally, it is suggested that major hurricane wind and water damage be investigated in greater detail by aerial photography, damage vector mapping, and ground surveys.

Fujita, T. T.↗
NASA NTRS1983

A unifying strain criterion for fracture of fibrous composite laminates

Fibrous composite materials, such as graphite/epoxy, are light, stiff, and strong. They have great potential for reducing weight in aircraft structures. However, for a realization of this potential, designers will have to know the fracture toughness of composite laminates in order to design damage tolerant structures. In connection with the development of an economical testing procedure, there is a great need for a single fracture toughness parameter which can be used to predict the stress-intensity factor (K(Q)) for all laminates of interest to the designer. Poe and Sova (1980) have derived a general fracture toughness parameter (Qc), which is a material constant. It defines the critical level of strains in the principal load-carryng plies. The present investigation is concerned with the calculation of values for the ratio of Qc and the ultimate tensile strain of the fibers. The obtained data indicate that this ratio is reasonably constant for layups which fail largely by self-similar crack extension.

Poe, C. C., Jr.↗
NASA NTRS1983

Structures and mechanisms - Streamlining for fuel economy

The design of prospective NASA space station components which inherently possess the means for structural growth without compromising initial system characteristics is considered. In structural design terms, space station growth can be achieved by increasing design safety factors, introducing dynamic isolators to prevent loads from reaching the initial components, or preplanning the refurbishment of the original structure with stronger elements. Design tradeoffs will be based on the definition of on-orbit loads, including docking and maneuvering, whose derived load spectra will allow the estimation of fatigue life. Improvements must be made in structural materials selection in order to reduce contamination, slow degradation, and extend the life of coatings. To minimize on-orbit maintenance, long service life lubrication systems with advanced sealing devices must be developed.

Card, M. F.↗
NASA NTRS1984

Airfoil interaction with impinging vortex

The tip of a finite-span airfoil was used to generate a streamwise vortical flow, the strength of which could be varied by changing the incidence of the airfoil. The vortex that was generated traveled downstream and interacted with a second airfoil on which measurements of lift, drag, and pitching moment were made. The flow field, including the vortex core, was visualized in order to study the structural alterations to the vortex resulting from various levels of encounter with the downstream airfoil. These observations were also used to evaluate the accuracy of a theoretical model.

Mcalister, K. W.↗
NASA NTRS1985

Longitudinal distribution of cosmic rays in the heliosphere

The longitudinal distribution of cosmic ray intensity was examined during the years 1974-1976 when the persistent high speed solar wind stream structures produced a well ordered inner heliosphere. Solar wind velocity is mapped back to the Sun and compared with cosmic ray intensity which is represented relative to the solar rotation average. Low solar wind velocity is observed to be a necessary, but not sufficient, condition for the occurrence of higher cosmic ray intensities at 1 AU. These relative enhancements cover a restricted range of heliographic longitudes and persist for several solar rotations. The observed solar wind and cosmic ray intensity relationships are consistent with a simple model suggested here in which cosmic ray modulation is very weak in the inner heliosphere, sunward of the first shock crossing on each field line and more intense in the outer heliosphere.

Gold, R. E.↗
NASA NTRS1985

Infrared studies of the bipolar nebula OHO739

Infrared studies have been made of the M9 giant OHO739, which is embedded in a bipolar nebula, in order to study the structure and density distribution of the circumstellar disk, and preliminary results are reported. The degree of polarization across the 3.1 micron ice band in an 8 arcsec beam centered at the 2.2 micron peak is found to increase with extinction in the ice band, as expected for a bipolar scattering nebula. A distance of 2 kpc is inferred from the tilt angle of the bipolar axis and phase lag measurements of the OH maser. Maps made in the K band and in narrow bands at 2.85, 3.1, and 3.5 microns by raster-scanning OHO739 are presented. In all maps, the object is clearly elongated along the bipolar axis. Patterns of increases and decreases in extinction in the object are inferred to indicate that ice particles are widespread through the nebula and not just concentrated in the disk.

Tielens, A. G. G. M.↗