Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

The Growth of InAs{sub x}Sb{sub 1 –x} Solid Solutions on Misoriented GaAs(001) Substrates by Molecular-Beam Epitaxy

The effect of a substrate misorientation degree from a singular face on the composition and morphology of layers of InAs{sub x}Sb{sub 1 –x} solid solutions obtained by molecular-beam epitaxy on a GaAs surface has been investigated. The substrates of GaAs wafers with the orientation (100) misoriented in the direction [110] by 0°, 1°, 2°, and 5° are used. The heterostructures are grown at temperatures of 310°C and 380°C (respectively, the lower and upper boundaries of the temperature range in which structurally perfect InAs{sub x}Sb{sub 1 –x} films form). The effect of the molecular form of arsenic (As{sub 2} or As{sub 4}) on the composition of the layers is studied. The composition and structural properties are investigated using high-resolution X-ray diffractometry (HRXRD) and atomic-force microscopy (AFM). It is established that, in the series of misorientation angles 0° → 5°, the arsenic fraction x increases consecutively when using fluxes of both As{sub 2} and As{sub 4} molecules. With the As{sub 2} molecular flux, the fraction x increases only a little (1.05 times) with increasing degree of misorientation, while, when using the As{sub 4} flux, the increase in x is 1.75 times. An increase in the growth temperature leads to growth in the arsenic fraction in the solid solution. The surface morphology improves with an increasing degree of misorientation at a low growth temperature and degrades at a high temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of boron on the step-free area formation on Si(111) mesa structures

We report about the influence of boron (B) on surface morphology of Si layers grown by molecular beam epitaxy on Si(111) mesas. Dimension of step-free mesa areas is reduced in comparison to pristine Si and scales with the B-coverage. This can be explained by a reduced mass transport on the Si surface in the presence of B-induced √3 × √3 surface structure which is due to a reduced Si equilibrium free adatom density. We demonstrate that a suitable combination of initial B coverage and Si layer thickness results in large step free areas and B doping concentration up to 4 × 10{sup 18 }cm{sup −3}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth and physical property of epitaxial Co{sub 70}Fe{sub 30} thin film on Si substrate via TiN buffer

Epitaxial Co{sub 70}Fe{sub 30} films with the bcc structure were grown on a Si(001) substrate with TiN as a buffer by sputtering technique. The x-ray diffraction results confirmed the epitaxial nature of the films and the crystallographic relationship was determined as Co{sub 70}Fe{sub 30}(002)<110>//TiN(002)<100>//Si(004)<100>. The surface morphology characterized by atomic force microscopy on our films revealed that smooth surfaces could be obtained at growth temperatures below 350 deg. C. The strain state of 60 nm epitaxial Co{sub 70}Fe{sub 30} films was studied as a function of growth temperature. Magnetization hysteresis loops of the films grown at 300 deg. C were measured using superconducting quantum interface device magnetometer.

36 MATERIALS SCIENCE↗

Synthesis of plasma polymerized PEM with pillar surface structure and its fuel cell performance

Highlights: • The surface morphology study of the membrane shows the presence of pillars on the surface of the membrane. • The membrane developed at 50 Watt shows good cell performance in fuel cell generating power density of 610 mW cm{sup −2}. • The pillar structure of the membrane also plays an indispensable role in the cell performance of the plasma polymerized PEM. - Abstract: Proton exchange membrane (PEM) is synthesized successfully by plasma polymerization technique in RF plasma discharge. The chemical composition of the prepared membranes is examined by FTIR analyses. SEM and AFM analysis of the membrane show the formation of a prominent pillar surface structure at high RF power. The pillar structure of the membrane also plays an indispensable role in the cell performance of the plasma polymerized PEM. The physical properties of the membrane developed under different plasma conditions are investigated in the range of RF power from 20 to 80 W. The membrane synthesized at 50 W shows better cell performance that it develops 610 mW cm{sup −2} of power density and 0.68 A cm{sup −2} of current density at 0.6 volts in fuel cell than other membranes synthesized at different plasma conditions.

30 DIRECT ENERGY CONVERSION↗

Locally Resolved Electron Emission Area and Unified View of Field Emission from Ultrananocrystalline Diamond Films

One of the common problems in case of field emission from polycrystalline diamond films, which typically have uniform surface morphology, is uncertainty in determining exact location of electron emission sites across the surface. Although several studies have suggested that grain boundaries are the main electron emission source, it is not particularly clear what makes some sites emit more than the others. It is also practically unclear how one could quantify the actual electron emission area and therefore field emission current per unit area. In this paper we study the effect of actual, locally resolved, field emission (FE) area on electron emission characteristics of uniform planar highly conductive nitrogen-incorporated ultrananocrystalline diamond ((N)UNCD) field emitters. It was routinely found that field emission from as-grown planar (N)UNCD films is always confined to a counted number of discrete emitting centers across the surface which varied in size and electron emissivity. It was established that the actual FE area critically depends on the applied electric field, as well as that the actual FE area and the overall electron emissivity improve with sp2 fraction present in the film irrespectively of the original substrate roughness and morphology. To quantify the actual FE area and its dependence on the applied electric field, imaging experiments were carried out in a vacuum system in a parallel-plate configuration with a specialty anode phosphor screen. Electron emission micrographs were taken concurrently with I-V characteristics measurements. In addition, a novel automated image processing algorithm was developed to process extensive imaging datasets and calculate emission area per image. By doing so, it was determined that the emitting area was always significantly smaller than the FE cathode surface area. Namely, the actual FE area would change from 5×10-3 % to 1.5 % of the total cathode area with the applied electric field increased. Finally and most importantly, it was shown that when I-E curves as measured in the experiment were normalized by the field-dependent emission area, the resulting j-E curves demonstrated a strong kink and significant deviation from Fowler-Nordheim (FN) law, and eventually saturated at a current density of ~100 mA/cm2 . This value was nearly identical for all (N)UNCD films measured in this study, regardless of the substrate.

36 MATERIALS SCIENCE↗

Properties of three-dimensional structures prepared by Ge dewetting from Si(111) at high temperatures

The formation of three-dimensional (3D) structures during Ge deposition on Si(111) at about 800 °C is studied with scanning tunneling, Kelvin probe and electron microscopies, and scanning tunneling and Raman spectroscopies. The observed surface morphology is formed by dewetting of Ge from Si(111), since it occurs mainly by means of minimization of surface and interfacial energies. The dewetting proceeds through massive Si eroding around growing 3D structures, providing them to be composed of SiGe with about a 30% Ge content, and leads to the significant reduction of the SiGe/Si interface area. It is found that the SiGe top component of 3D structures forms sharp interfaces with the underlying Si. The minimization of interfacial and strain energies occurs on the way that the 3D structures appear to get the dendrite-like shape. The Ge distribution in the 3D SiGe structures is inhomogeneous in the lateral dimension with a higher Ge concentration in their central areas and Ge segregation on their surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suppression of electroconvective and morphological instabilities by an imposed cross flow of the electrolyte

Electroconvective (EC) instability and its influence on surface morphological perturbations (Morph) are important in many applications, including electrodialysis, batteries, and fuel cells. In this work, we study the effects of a two-dimensional channel flow on the EC and Morph instabilities using two approaches. In the bulk analysis, we derive the asymptotic solutions for small and large wave numbers by neglecting the space charge layer and imposing a second kind electroosmosis slip velocity boundary condition on the electroneutral bulk region. In the full analysis, the instability of the entire region of the liquid electrolyte is analyzed using the ultraspherical spectral method. Both studies show that the flow significantly affects the EC instability. The imposed flow distorts the concentration field, causing a sheltering effect which hinders the ion transport from low- to high-concentration regions, and therefore suppresses the EC instability below a certain wave number. In combination with the viscous stabilization of the high wave number modes by the space charge layer, a sufficiently strong imposed flow can fully suppress the EC instability. The increment in the critical voltage for the instability onset is roughly proportional to the square root of the product of imposed velocity and double layer thickness. The imposed flow has a smaller effect on the Morph instability, except that it may remove the morphological modes resulting from the EC instability and thereby change the wave number of the most unstable mode.

42 ENGINEERING↗

Comparative Response of Indigenously Developed Bacterial Consortia on Progressive Degradation of Polyhydroxybutyrate Film Composites

The global demand of bioplastics has lead to an exponential increase in their production commercially. Hence, biodegradable nature needs to be evaluated in various ecosystems viz. air, water, soil and other environmental conditions to avoid the polymeric waste accumulation in the nature. In this paper, we investigated the progressive response of two indigenously developed bacterial consortia, i.e., consortium-I (C-I: Pseudomonas sp. strain Rb10, Pseudomonas sp. strain Rb11 and Bacillus sp. strain Rb18), and consortium-II (C-II: Lysinibacillus sp. strain Rb1, Pseudomonas sp. strain Rb13 and Pseudomonas sp. strain Rb19), against biodegradation behavior of polyhydroxybutyrate (PHB) film composites, under natural soil ecosystem (in net house). The biodegraded films recovered after 6 and 9 months of incubation were analyzed through Fourier transform infrared spectroscopy and scanning electron microscopy to determine the variations in chemical and morphological parameters (before and after incubation). Noticeable changes in the bond intensity, surface morphology and conductivity were found when PHB composites were treated with C-II. These changes were drastic in case of blends in comparison to copolymer. The potential isolates not only survived, but, also, there was a significant increase in bacterial diversity during whole period of incubation. To the best of our knowledge, it is the first report which described the biodegradation potential of Lysinibacillus sp. as a part of C-II with Pseudomonas sp. against PHB film composites.

54 ENVIRONMENTAL SCIENCES↗

Effects of pulsed current and H{sub 2}O{sub 2} amount on the composition of electrodeposited calcium phosphate coatings

Calcium phosphate coatings on Ti6Al4V substrates were elaborated by pulsed electrodeposition with hydrogen peroxide (H{sub 2}O{sub 2}) into electrolyte. The surface morphology and the chemical composition of the coatings were characterized by scanning electron microscopy (SEM) associated to Energy Dispersive X-ray Spectroscopy (EDXS) for X-ray microanalysis. The obtained results were systematically confirmed at the nanometre scale analysis using scanning transmission electron microscopy (STEM). Moreover, X-ray diffraction (XRD) was performed in order to identify the coatings phases. The results showed that pulsed electrodeposition without H{sub 2}O{sub 2} into electrolyte followed by heat treatment favoured coatings made of two phases which are stoichiometric hydroxyapatite (HAP) and {beta}-tricalcium phosphate ({beta}-TCP). On the other hand the addition of an optimized H{sub 2}O{sub 2} amount into electrolyte led to adherent and uniform coatings mainly made of stoichiometric hydroxyapatite (HAP).

36 MATERIALS SCIENCE↗

The Surface Chemistry and Structure of Colloidal Lead Halide Perovskite Nanocrystals

Since the initial discovery of colloidal lead halide perovskite nanocrystals, there has been significant interest placed on these semiconductors because of their remarkable optoelectronic properties, including very high photoluminescence quantum yields, narrow size- and composition-tunable emission over a wide color gamut, defect tolerance, and suppressed blinking. These material attributes have made them attractive components for next-generation solar cells, light emitting diodes, low-threshold lasers, single photon emitters, and X-ray scintillators. While a great deal of research has gone into the various applications of colloidal lead halide perovskite nanocrystals, comparatively little work has focused on the fundamental surface chemistry of these materials. While the surface chemistry of colloidal semiconductor nanocrystals is generally affected by their particle morphology, surface stoichiometry, and organic ligands that contribute to the first coordination sphere of their surface atoms, these attributes are markedly different in lead halide perovskite nanocrystals because of their ionicity. Herein, emerging work on the surface chemistry of lead halide perovskite nanocrystals is highlighted, with a particular focus placed on the most-studied composition of CsPbBr 3 . We begin with an in-depth exploration of the native surface chemistry of as-prepared, 0-D cuboidal CsPbBr 3 nanocrystals, including an atomistic description of their surface termini, vacancies, and ionic bonding with ligands. We then proceed to discuss various post-synthetic surface treatments that have been developed to increase the photoluminescence quantum yields and stability of CsPbBr 3 nanocrystals, including the use of tetraalkylammonium bromides, metal bromides, zwitterions, and phosphonic acids, and how these various ligands are known to bind to the nanocrystal surface. To underscore the effect of post-synthetic surface treatments on the application of these materials, we focus on lead halide perovskite nanocrystal-based light emitting diodes, and the positive effect of various surface treatments on external quantum efficiencies. We also discuss the current state-of-the-art in the surface chemistry of 1-D nanowires and 2-D nanoplatelets of CsPbBr 3 , which are more quantum confined than the corresponding cuboidal nanocrystals but also generally possess a higher defect density because of their increased surface area-to-volume ratios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal Orientation-Dependent Reactivity of Oxide Surfaces in Contact with Lithium Metal

Understanding ionic transport across interfaces between dissimilar materials and the intrinsic chemical stability of such interfaces is a fundamental challenge spanning many disciplines and is of particular importance for designing conductive and stable solid electrolytes for solid-state Li-ion batteries. In this work, we establish a surface science-based approach for assessing the intrinsic stability of oxide materials in contact with Li metal. Through a combination of experimental and computational insights, using Nb-doped SrTiO3 (Nb/STO) single crystals as a model system, we were able to understand the impact of crystallographic orientation and surface morphology on the extent of the chemical reactions that take place between surface Nb, Ti, and Sr upon reaction with Li. By expanding our approach to investigate the intrinsic stability of the technologically relevant, polycrystalline Nb-doped lithium lanthanum zirconium oxide (Li6.5La3Zr1.5Nb0.5O12) system, we found that this material reacts with Li metal through the reduction of Nb, similar to that observed for Nb/STO. These results clearly demonstrate the feasibility of our approach to assess the intrinsic (in)stability of oxide materials for solid-state batteries and point to new strategies for understanding the performance of such systems.

36 MATERIALS SCIENCE↗

Magnetic properties and magnetic domains of Nd-Fe-B thin films

Anisotropic Nd-Fe-B thin films are fabricated by direct current magnetron sputtering on Si substrates heated to temperatures over a wide range. Surface morphology and magnetic domains of the Nd-Fe-B thin films prepared at different sputtering temperatures (25-600 deg. C) are observed by a scanning probe microscopy. The magnetic domains exhibit a rich variety of textures, changing from striped via maze to cloudlike as the sputtering temperature is increased. Variations in magnetic domains with substrate temperature are discussed using phase components and magnetic anisotropies of the thin films. In addition, patterns of magnetic domains are analyzed using the 'disorder functions', a set of characterizations of complex patterns with labyrinthine structures. The disorder function {delta}(1) and the structure factor {delta}k do not change appreciably until a substrate temperature of 350 deg. C, but increases significantly beyond 400 deg. C. The disorder in magnetic domains increases with increasing sputtering temperature. A simultaneous enhancement of the anisotropic c texture and the hard-magnetic properties of the thin films are observed. The significant change of the disorder function at T{sub s}=400 deg. C appears to be a precursor to the hardening of the Nd-Fe-B film. The most disordered magnetic domains of the film with the substrate temperature of 600 deg. C correspond to the optimum magnetic properties, with the maximum energy product (BH){sub max} of 22.4 MG Oe.

36 MATERIALS SCIENCE↗

A comparative study of ultraviolet photoconductivity relaxation in zinc oxide (ZnO) thin films deposited by different techniques

Photoresponse characteristics of ZnO thin films deposited by three different techniques namely rf diode sputtering, rf magnetron sputtering, and electrophoretic deposition has been investigated in the metal-semiconductor-metal (MSM) configuration. A significant variation in the crystallinity, surface morphology, and photoresponse characteristics of ZnO thin film with change in growth kinetics suggest that the presence of defect centers and their density govern the photodetector relaxation properties. A relatively low density of traps compared to the true quantum yield is found very crucial for the realization of practical ZnO thin film based ultraviolet (UV) photodetector.

36 MATERIALS SCIENCE↗

Effect of CeO{sub 2} addition on the properties of FeAl based alloy produced by mechanical alloying technique

Iron aluminides based on FeAl is notable for their low materials cost, ease of fabrication and good corrosion, suffixation and oxidation resistance. However, the application based on these unique properties still require the development of Fe-Al based alloy since it shows some drawbacks such as a lack of high temperature strength and low ductility. To improve the mechanical properties of FeAl based alloy, ceria (CeO{sub 2}) will be added to this compound. FeAl based alloy produced by the mechanical alloying (MA) technique. The developed specimens then assessed with respect to oxidation behaviour in high temperature, scale microstructure and hardness. The surface morphologies of the alloy evaluated and observed using scanning electron microscopy (SEM) with an energy dispersive X-ray spectroscopy (EDX). The phase structures of oxide scale formed on them were identified by X-ray diffraction (XRD). The results found that the FeAl intermetallic compound containing CeO{sub 2} 0.5 wt.% is less pores and CeO{sub 2} 1.0 wt.% is more homogen in powder and solid form, higher hardness and increase in their resistance to oxidation behaviour in high temperature compared with another percentage of CeO{sub 2}.

36 MATERIALS SCIENCE↗

Inversion by metalorganic chemical vapor deposition from N- to Ga-polar gallium nitride and its application to multiple quantum well light-emitting diodes

We demonstrate a metalorganic chemical vapor deposition growth approach for inverting N-polar to Ga-polar GaN by using a thin inversion layer grown with high Mg flux. The introduction of this inversion layer allowed us to grow p-GaN films on N-polar GaN thin film. We have studied the dependence of hole concentration, surface morphology, and degree of polarity inversion for the inverted Ga-polar surface on the thickness of the inversion layer. We then use this approach to grow a light emitting diode structure which has the MQW active region grown on the advantageous N-polar surface and the p-layer grown on the inverted Ga-polar surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anomalous patterns and nearly defect-free ripples produced by bombarding silicon and germanium with a beam of gold ions

We demonstrate that surface ripples with an exceptionally high degree of order can develop when germanium is bombarded with a broad beam of gold ions. In contrast, if silicon is sputtered with an Au{sup −} beam, patches of ripples with two distinct wave vectors can emerge. These types of order can be understood if the coupling between the surface morphology and composition is taken into account.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of interfacial layer on the crystal structure of InAs/AlAs{sub 0.16}Sb{sub 0.84}/AlSb quantum wells

Ion channeling technique using MeV C{sup 2+} ions and high resolution X-ray diffraction were used to study the crystal quality of an InAs/AlSb-based quantum wells. We found that the InAs quality has a strong dependence on the type of the interface used. With the addition of the InSb-like interface, the crystal quality of the InAs channel was greatly improved. The InAs lattice was fully strained and aligned with the lattice of the buffer layer without any lattice relaxation. On the other hand, if the interface was of the AlAs type, the lattice of the InAs quantum well was relaxed and the crystal quality was poor. This explains why a superior InAs quantum well with high electron mobility and good surface morphology can be achieved with the use of the InSb interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological and thermal properties of polypropylene composites based on oil palm biomass

Roughness on pristine and polymer composite surfaces is of enormous practical importance for polymer applications. This study deals with the use of varying quantity of oil palm ash as a nanofiller in a polypropylene based matrix. The oil palm ash sample was preprocessed to break the particles into small diameter by using ultra sonication before using microfluidizer for further deduction in size and homogenization. The oil palm ash was made to undergo many passes through the microfluidizer for fine distribution of particles. Polypropylene based composites containing different loading percentage oil palm ash was granulated by twin screw extruder and then injection molded. The surface morphology of the OPA passed through microfluidizer was analyzed by Tapping Mode - Atomic Force Microscopy (TMAFM). Thermal analysis results showed an increase in the activation energy values. The thermal stability of the composite samples showed improvement as compared to the virgin polymer as corroborated by the on-set degradation temperatures and the temperatures at which 50% degradation occurred.

36 MATERIALS SCIENCE↗