Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature control applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Steady-state off-design modeling of the supercritical carbon dioxide recompression cycle for concentrating solar power applications with two-tank sensible-heat storage

Concentrating solar power researchers are evaluating the potential of the supercritical carbon dioxide recompression cycle to improve the thermal efficiency and decrease the capital costs of next-generation systems. This analysis investigates the steady-state off-design performance of a recompression cycle integrated with two-tank sensible-heat thermal energy storage as the ambient temperature and heat-transfer fluid (HTF) inlet conditions to the cycle change. This paper presents off-design component models and then cycle convergence and control models to maximize net cycle power output while constraining the high-side pressure and air-cooler fan power to their respective design values and fixing the cycle HTF outlet temperature to its design value. Results show that inventory control and air-cooler fan power are important control parameters that can be optimized to maximize off-design power output as the ambient temperature and HTF mass flow rate diverge from design. The high-side pressure and fan power constraints cause the cycle net power to degrade when the ambient temperature is warmer than the design value, and this study calculates a maximum mass flow rate for hot days above which the cycle cannot achieve the design HTF outlet temperature. Finally, the analysis shows that optimizing compressor shaft speeds can improve cold-day performance by around 1.5 percentage points and part-load performance by up to 2.5 percentage points versus a baseline case with no active compressor control.

14 SOLAR ENERGY↗
DOE OSTI2023

Understanding palladium–tellurium cluster formation on WTe2: From a kinetically hindered distribution to thermodynamically controlled monodispersity

Abstract A fundamental understanding of the transition metal dichalcogenide (TMDC)–metal interface is critical for their utilization in a broad range of applications. We investigate how the deposition of palladium (Pd), as a model metal, on WTe2(001), leads to the assembly of Pd into clusters and nanoparticles. Using X-ray photoemission spectroscopy, scanning tunneling microscopy imaging, and ab initio simulations, we find that Pd nucleation is driven by the interaction with and the availability of mobile excess tellurium (Te) leading to the formation of Pd-Te clusters at room temperature. Surprisingly, the nucleation of Pd-Te clusters is not affected by intrinsic surface defects, even at elevated temperatures. Upon annealing, the Pd-Te nanoclusters adopt an identical nanostructure and are stable up to ∼523 K. Density functional theory calculations provide a foundation for our understanding of the mobility of Pd and Te atoms, preferential nucleation of Pd-Te clusters, and the origin of their annealing-induced monodispersity. These results highlight the role the excess chalcogenide atoms may play in the metal deposition process. More broadly, the discoveries of synthetic pathways yielding thermally robust monodispersed nanostructures on TMDCs are critical to the manufacturing of novel quantum and microelectronics devices and catalytically active nano-alloy centers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Accurate Machine Learning for Predicting the Viscosities of Deep Eutectic Solvents

Deep eutectic solvents (DESs) are emerging as environmentally friendly designer solvents for mass transport and heat transfer processes in industrial applications; however, the lack of accurate tools to predict and thus control their viscosities under both a range of environmental factors and formulations hinders their general application. While DESs may serve as designer solvents, with nearly unlimited combinations, this unfortunately makes it experimentally infeasible to comprehensively measure the viscosities of all DESs of potential industrial interest. To assist in the design of DESs, we have developed several new machine learning (ML) models that accurately and rapidly predict the viscosities of a diverse group of DESs at different temperatures and molar ratios using, to date, one of the most comprehensive data sets containing the properties of over 670 DESs over a wide range of temperatures (278.15–385.25 K). Three ML models, including support vector regression (SVR), feed forward neural networks (FFNNs), and categorical boosting (CatBoost), were developed to predict DES viscosity as a function of temperature and molar ratio and contrasted with multilinear and two-factor polynomial regression baselines. Further, quantum chemistry-based, COSMO-RS-derived sigma profile (σ-profile) features were used as inputs for the ML models. The CatBoost model is excellent at externally predicting DES viscosity, as indicated by high R 2 (0.99) and low root-mean-square-error (RMSE) and average absolute relative deviations (AARD) (5.22%) values for the testing data sets, and 98% of the data points lie within the 15% of AARD deviations. Furthermore, SHapley additive explanation (SHAP) analysis was employed to interpret the ML results and rationalize the viscosity predictions. The result is an ML approach that accurately predicts viscosity and will aid in accelerating the design of appropriate DESs for industrial applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Spin Texture Control and Magnetic Gap Engineering in a Ferromagnetic Insulator–Topological Insulator Sandwiched Heterostructure

Quantum materials that combine magnetism with topological order are emerging as key platforms for next-generation spintronics and low-energy electronics. They enable the realization of emergent quantum phenomena, such as the quantum anomalous Hall effect and axion insulator states. The ferromagnetic insulator (FMI)/topological insulator (TI)/FMI sandwich structure of a single-septuple layer (1SL) MnBi 2 Te 4 /four-quintuple layer (4QL) Bi 2 Te 3 /1SL MnBi 2 Te 4 holds great potential to achieve such desirable quantum phenomena at an elevated temperature, owing to its large Dirac point band gap and high Curie temperature. Here, for this work, spin- and angle-resolved photoemission spectroscopy (spin-ARPES) is employed to directly verify that the band gap arises from broken time-reversal symmetry via proximity-driven magnetization. This study demonstrates direct control of the spin state via external magnetic fields and unambiguously confirms the exchange interaction as the gap-opening mechanism. The robust magnetic gap and controllable spin texture make this heterostructure a suitable candidate for spintronic applications and magnetic topological quantum phases.

exchange gap↗
DOE OSTI2023

α-Quartz Phase Stabilization, Surface Texturing, and Tunable Optical Properties of Nanocrystalline GeO 2 Films Made by Pulsed-Laser Deposition: Implications for Optical and Optoelectronic Applications

Germanium oxide (GeO 2 ) has great potential in multifunctional devices and next-generation power electronics due to its high thermal conductivity and ambipolar doping capability. However, the complexity of synthesizing the desirable polymorph with a controlled phase, surface/interface quality, microstructure, and functional properties is the main barrier to GeO 2 utilization in advanced applications. Here, in this regard, we present a method to realize the hexagonal (h) or a-quartz type GeO 2 with nano-textured surface morphology on sapphire substrates using a hybrid synthesis strategy that comprises pulsed laser deposition (PLD) and post-deposition thermal annealing. We performed a comprehensive study to investigate the effect of annealing temperature, which was varied in a wide range (600-1100 °C), on the crystal structure, phase, surface morphology, chemical stoichiometry, defect states, and optical properties of PLD-grown GeO 2 films. As-deposited GeO 2 films at 500 °C were amorphous. Upon annealing, the GeO 2 films induced an amorphous-to-crystalline phase transformation; GeO 2 films annealed at higher annealing temperatures (≥900 °C) stabilized in the hexagonal phase and demonstrated excellent crystal quality and chemical stability. Thermally activated growth process showed increased average crystallite size, which was varied in the range of 20-130 (±2) nm, while the surface roughness followed a similar trend. The spectral transmittance and band gap also increased with increasing annealing temperature. The resulting h-GeO 2 films, particularly those obtained at annealing temperatures in the 900-1100 °C range, had a higher band gap of 6.2-6.3 eV and displayed excellent optical transmittance in the visible region. Moreover, the absence of extended valence band maxima and reduced optical defect density support the quality improvement upon annealing. When considering phase-pure bulk and nanostructured GeO 2 as a possible candidate for ultra wide band gap semiconductors in cutting-edge technological applications, the results of the current work can be beneficial to realize high structural and optical quality a-quartz structured GeO 2 films.

GeO2↗
DOE OSTI2024

Anti-reflection coating with mullite and Duroid for large-diameter cryogenic sapphire and alumina optics

We developed a broadband two-layer anti-reflection (AR) coating for use on a sapphire half-wave plate (HWP) and an alumina infrared (IR) filter for the cosmic microwave background (CMB) polarimetry. Measuring the faint CMB B-mode signals requires maximizing the number of photons reaching the detectors and minimizing spurious polarization due to reflection with an off-axis incident angle. Sapphire and alumina have high refractive indices of 3.1 and are highly reflective without an AR coating. This paper presents the design, fabrication, quality control, and measured performance of an AR coating using thermally sprayed mullite and Duroid 5880LZ. This technology enables large optical elements with diameters of 600 mm. We also present a thermography-based nondestructive quality control technique, which is key to assuring good adhesion and preventing delamination when thermal cycling. We demonstrate the average reflectance of about 2.6% (0.9%) for two observing bands centered at 90/150 (220/280) GHz. At room temperature, the average transmittance of a 105 mm square test sample at 220/280 GHz is 83%, and it will increase to 90% at 100 K, attributed to reduced absorption losses. Therefore, our developed layering technique has proved effective for 220/280 GHz applications, particularly in addressing dielectric loss concerns. This AR coating technology has been deployed in the cryogenic HWP and IR filters of the Simons Array and the Simons observatory experiments and applies to future experiments such as CMB-S4.

Sakaguri, Kana (ORCID:0000000156678118)↗
DOE OSTI2023

Search for High-Pressure Silicon Phases: Reaching the Extreme Conditions with High-Intensity Laser Irradiation

Controlling electronic and optical properties of semiconducting materials could substantially expand their functionality and enable new pathways for the formation of ‘smart’ materials for emerging innovative applications. An emerging new path for the synthesis of exotic silicon (Si) polymorphs is irradiation of bulk diamond-cubic Si by ultrashort laser pulses at relativistic intensity above 1019 W/cm2. Exotic polymorphs are formed due to interaction with MeV-energy electrons generated in laser-produced high-temperature plasma state. The unusual Si structures are found in the form of 5–10 nm nanoparticles confined deep in the bulk of 500-μm-thick Si samples. Raman spectroscopy, electron microscopy and X-ray diffraction studies provide an unequivocal evidence of exotic Si phase formation. A key advantage of such relativistic irradiation lies thereby in the fact that large quantities of such exotic Si is synthesised embedded within the bulk diamond-cubic Si and that further the formed Si polymorphs are stable at ambient temperature and pressure. They are thus available for further studies for electronic applications in selective band gap engineering.

Rapp, Ludovic↗
DOE OSTI2021

Applying design principles to improve hydrogen storage capacity in nanoporous materials

Hydrogen is an attractive option for energy storage because it can be produced from renewable sources and produces environmentally benign byproducts. However, the volumetric energy density of molecular hydrogen at ambient conditions is low compared to other storage methods like batteries, so it must be compressed to attain a viable energy density for applications such as transportation. Nanoporous materials have attracted significant interest for gas storage because they can attain high storage density at lower pressure than conventional compression. Here, we examine how to improve the cryogenic hydrogen storage capacity of a series of porous aromatic frameworks (PAFs) by controlling the pore size and increasing the surface area by adding functional groups. We also explore tradeoffs in gravimetric and volumetric measures of the hydrogen storage capacity and the effects of temperature swings using grand canonical Monte Carlo simulations. We also consider the effects of adding functional groups to the metal–organic framework NU-1000 to improve its hydrogen storage capacity. We find that highly flexible alkane chains do not improve the hydrogen storage capacity in NU-1000 because they do not extend into the pores; however, rigid chains containing alkyne groups do increase the surface area and hydrogen storage capacity. Finally, we demonstrate that the deliverable capacity of hydrogen in NU-1000 can be increased from 40.0 to 45.3 g/L (at storage conditions of 100 bar and 77 K and desorption conditions of 5 bar and 160 K) by adding long, rigid alkyne chains into the pores.

08 HYDROGEN↗
DOE OSTI2021

Growth of topological insulator Bi 2 Se 3 particles on GaAs via droplet epitaxy

The discovery of topological insulators (TIs) and their unique electronic properties has motivated research into a variety of applications, including quantum computing. It has been proposed that TI surface states will be energetically discretized in a quantum dot nanoparticle. These discretized states could then be used as basis states for a qubit that is more resistant to decoherence. In this work, prototypical TI Bi2Se3 nanoparticles are grown on GaAs (001) using the droplet epitaxy technique, and we demonstrate the control of nanoparticle height, area, and density by changing the duration of bismuth deposition and substrate temperature. Within the growth window studied, nanoparticles ranged from 5 to 15 nm in height with an 8–18 nm equivalent circular radius, and the density could be relatively well controlled by changing the substrate temperature and bismuth deposition time.

Materials Science↗
DOE OSTI2022

Performance Assessment of High-Efficiency Refrigerated Display Cases With Low Global Warming Potential Refrigerants

As California policy makers enforce new regulations such as SB 1383 to achieve state greenhouse gas reduction goals, it will be critical to understand the energy efficiency implications of low global warming potential (GWP) refrigerants in commercial refrigeration applications. The goal of this research project, funded by Commonwealth Edison, was to assess the energy performance of two high-efficiency medium-temperature, self-contained, reach-in display cases that utilized natural refrigerant propane (R-290, GWP = 3), and hydrofluorocarbon (HFC) drop-in hydrofluoroolefin R-513A (GWP = 573). Performance of these display cases was compared to a baseline fixture using HFC (R-134A, GWP = 1301) under equal conditions in a controlled environment chamber. These display cases were selected due to their widespread use in convenience stores and small supermarkets. The high-efficiency cases were equipped with energy-efficient lighting, improved panel insulation, high-efficiency evaporator and condenser fan motors, and high-effectiveness heat exchangers. The test method used in this project was foundationally inspired by the ANSI/ASHRAE 72-2018 standard method to evaluate each case under equivalent conditions (ASHRAE 2018). However, minor modifications to this methodology were implemented to better represent more realistic operation of the units. While maintaining equivalent target product temperature, the energy-efficient fixtures A (containing R-290, improved insulation, heat exchangers with a higher overall heat transfer coefficient (higher UA), and more efficient lighting and fan motors) and B (containing R-513A, improved fans, and higher UA-heat exchangers, and more efficient lighting and fan motors) consumed 61.8% to 32.6% less energy, respectively, than a baseline case using R-134A refrigerant. The daily energy consumption of the R-290, R-513A, and baseline display cases at the upper limit of environmental conditions was 4.30, 7.59, and 11.26 kWh/day, respectively.

alternative refrigerants↗
DOE OSTI2020

A comparative experimental study of the hygroscopic and mechanical behaviors of electrospun nanofiber membranes and solution–cast films of polybenzimidazole

This article reports a comparative experimental study of the hygroscopic and mechanical behaviors of electrospun polybenzimidazole (PBI) nanofiber membranes and solution-cast PBI films. As-electrospun nonwoven PBI nanofiber mats (with the nanofiber diameter of ~250 nm) were heat-pressed under controlled temperature, pressure and duration for the study; lab-made solution-cast PBI films and commercially available PBI films (the PBI Performance Product Inc., Charlotte, NC) were used as the control samples. Thermogravimetric and microtensile tests were utilized to characterize the hygroscopic (moisture absorption) and mechanical properties of the PBI nanofiber membranes at varying heat-pressing conditions, which were further compared to those of solution-cast PBI films. Experimental results indicated that the PBI nanofiber membranes carried slightly higher thermal stability and less hygroscopic properties than those of solution-cast PBI films. In addition, heat-pressing conditions significantly influenced the mechanical properties of the resulting PBI nanofiber membranes. The stiffness and tensile strength increase with increasing either the heat-pressing pressure or duration, and relevant mechanisms were explored. Here, the present study provides a rational understanding of the hygroscopic and mechanical behaviors of electrospun PBI nanofiber membranes and solution-cast PBI films that are beneficial to their reliable cutting-edge applications in high-temperature filtration, polymer electrolyte membranes (PEMs), etc.

25 ENERGY STORAGE↗
DOE OSTI2020

Optoelectronic and material properties of solution-processed Earth-abundant Cu 2 BaSn(S, Se) 4 films for solar cell applications

Copper barium thioselenostannate, Cu 2 BaSnS 4-x Se x (CBTSSe), absorbers employ low-toxicity and abundant metals while offering low-cost manufacturing options, controllable stoichiometry and band gap tunability (from 2 eV at x = 0 to 1.55 eV at x = 3). CBTSSe can therefore be considered a prospective candidate for maintaining or improving upon the advantages of already commercialized Cu(In,Ga)(S,Se) 2 (CIGSSe) and CdTe absorbers. Here, we focus on solution-deposited stoichiometric CBTSSe films with band gap of 1.59 eV (x ≈ 3) and explore the fundamental film properties. Temperature- and excitation-dependent photoluminescence studies reveal a dominant defect emission at ~1.5 eV and a second deep defect feature at 1.15 eV. From time-resolved terahertz measurements, we find a charge carrier (electron and hole sum) mobility of ~140 cm 2 /Vs—i.e., comparable to values in CIGSSe or Cu 2 ZnSnS 4-x Se x (CZTSSe)—as well as a two-component minority carrier lifetime. A longer-lived lifetime component (~2 ns) arises from bulk recombination. However, strong recombination at the (bare) surface leads to a ~50 ps lifetime, inferior to state-of-the-art CIGSSe or CZTSSe absorbers. This recombination issue may worsen for CBTSSe/CdS interfaces, due to a cliff-like band alignment with 0.6 eV band offset, as revealed by ultraviolet photoemission spectroscopy. A low number of charge carriers within the absorber further contributes to a high series resistance. Employing these films, we also report the highest performance achieved from solution-processed trigonal CBTSSe thin-film photovoltaic devices, with open circuit voltage, short-circuit current density, fill factor and efficiency of 470 mV, 14.3 mA/cm 2 , 43.6% and 2.9%, respectively. The physical measurements provided on the stoichiometric solution-processed CBTSSe absorber further point to critical areas for future improvement of CBTSSe and related photovoltaic cells in the quest for higher efficiency devices based on earth abundant metals.

14 SOLAR ENERGY↗
DOE OSTI2023

Understanding the Control of Speciation of Molybdenum Oxides in MFI-Type Zeolites

Metal oxide-impregnated zeolites are employed in a wide variety of catalytic reactions, including methane dehydroaromatization (MDA). The most studied catalysts for MDA are Mo carbides supported on H-ZSM-5, formed through the carburization of Mo-oxide-loaded H-ZSM-5. A complete structural understanding of these materials has not yet been achieved, limiting the potential for rational catalyst design for improved performance. We hereby pursue experimental and theoretical investigations of these catalyst precursors to uncover rational design principles. We employ temperature-programmed oxidation and extended X-ray absorption fine-structure experiments, density functional theory calculations, and QuantEXAFS analysis to unveil Mo-oxide speciation in H-ZSM-5. Finally, we demonstrate that Mo-oxides exist within these systems as a combination of various motifs, and the relative abundance of these species is controlled through tailored preparation methods. The synergies exploited in this work may be leveraged in other related catalysts. The conclusions drawn are applicable to other relevant applications of zeolite-supported metal oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Coherent approach to two-dimensional heterolayered oxychalcogenides using molten hydroxides.

Heterolayered structures consist of two or more different types of layer and can exhibit exceptional physical properties. Rational routes to synthesize new members of such compounds are required because most of these compounds have been discovered unintentionally. So far there is no generic method to vertically stack chemically different layers to form two-dimensional compounds owing to a lack of understanding of the synthesis of these materials. Here we report the use of molten hydroxides as unconventional solutions for the rapid stacking of oxide and chalcogenide layers with precise composition control. In addition, the crystal growth of heterolayered phases can be achieved by the reaction of different components at their diffusion front in molten hydroxides. This approach creates conditions in which the building blocks for each heterolayer can coexist, enabling heterolayered structures and bypassing the challenges of traditional solid-state chemistry methods where short reactant diffusion lengths predominate. This crystal growth methodology for heterolayers is also applicable to systems that do not form congruent melts at high temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Modulating surface acoustic wave generation through superconductivity

Surface acoustic waves (SAWs), with their five orders-of-magnitude slower propagation velocity, allow for considerably shorter wavelengths at the same frequency compared to electromagnetic waves. The short wavelengths allow for device miniaturization and on-chip integration. The generic design of these devices involves piezoelectric substrates with comb-like arrays of Al or Au electrodes known as interdigitated transducers (IDTs) deposited on the surface. However, Al and Au both have shortcomings at the cryogenic temperatures required for quantum applications, namely, the formation of two-level systems and the lack of superconductivity perpetuating Ohmic losses, respectively. In this work, SAWs are generated in the high-MHz to low-GHz range using niobium nitride (NbN) interdigitated transducers and Bragg reflectors. We demonstrate the fabrication of acoustic devices through photolithography and reactive ion etching. The sharp transition between superconducting and normal states and the corresponding change in SAW transmission allows for fine control of the “on” (superconducting) and “off” (normal) states of NbN, with a ΔT = 1 K separating the transmission minimum and maximum. We demonstrate a 16× difference in transmission between the “on” and “off” states of the device. The SAW transmission behavior mirrors the change in resistance of NbN at its T c . These findings open up new possibilities for the integration of NbN SAW resonators into existing quantum architectures based on NbN and a method for adjusting transmission properties independent of applied voltage.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Photoluminescence in Tagging: A Glowing Review

This literature review explores the options of using photoluminescence for tagging uranium fuel and zirconium cladding in order to easily and quickly associate interdicted material to its facility of origin or pathway after loss of institutional control. Photoluminescence is the spontaneous emission of radiation by a substance when excited by interaction with light. The source of photoluminescence can be from organic, inorganic, and organometallic compounds. Each luminophore, or compound responsible for luminescent properties, has individual strengths and weaknesses, depending on the intended use. Many factors can affect the brightness, lifetime, color, and detectability of luminophores, such as humidity, temperature, oxygen availability, noise from radiation–induced luminescence, and the presence of quenching substances like iron. Application of luminescent compound to the surface of an item can be done using paint, dye, thin film, thick film, or electrochemical coating. Several of the application techniques may have secondary functions such as corrosion resistance and detection, heat resistance, protective properties, and more. When considering cladding, there are various successful studies on the application of luminescent coatings on zirconium. However, significant research will be necessary to explore which luminophore and which application technique would best fit the intended use. In order to proceed with this research, a baseline of the natural luminescence of the intended base material (nuclear fuel or cladding) is necessary. While there may be issues with background noise, quenching from the environment, quenching from the substrate, signal to noise weakness, etc. the multitude of options may make photoluminescent tagging an option. In summary, this review has demonstrated that photoluminescence is a potential option to tag nuclear fuel and cladding, but additional paper–studies, testing, and research is required to understand the compatibility of luminescent tags in nuclear reactor environments, manufacturability, and detectability.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Microwave Synthetic Routes for Shape-Controlled Catalyst Nanoparticles and Nanocomposites

The use of microwave irradiation for the synthesis of inorganic nanomaterials has recently become a widespread area of research that continues to expand in scope and specialization. The growing demand for nanoscale materials with composition and morphology tailored to specific applications requires the development of facile, repeatable, and scalable synthetic routes that offer a high degree of control over the reaction environment. Microwave irradiation provides unique advantages for developing such routes through its direct interaction with active reaction species, which promotes homogeneous heat distribution, increased reaction rates, greater product quality and yield, and use of mild reaction conditions. Many catalytic nanomaterials such as noble metal nanoparticles and intricate nanocomposites have very limited synthetic routes due to their extreme temperature sensitivity and difficulty achieving homogeneous growth. This work presents recent advances in the use of MW irradiation methods to produce high-quality nanoscale composites with controlled size, morphology, and architecture.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Reticulated porous lanthanum strontium manganite structures for solar thermochemical hydrogen production

Porous ceramic foams are utilized in various fields and applications due to their advantageous properties such as high porosity, high specific surface area, and controlled permeability. Non-stoichiometric oxide foams are of particular interest for the solar thermochemical production of hydrogen in directly irradiated solar receivers due to their enhanced heat transfer capabilities and structural integrity. Here we report the fabrication of lanthanum strontium manganite replica foams and their solar thermochemical water splitting performance. Highly porous (>80%) foams were produced with controlled structure and tested in a high temperature water splitting furnace to demonstrate stability and overall performance. The temperature profile of the burnout and sintering of the foam structure were altered based on simultaneous differential scanning calorimetry and thermal gravimetry analysis. Two-step sintering was used both to retain micron-sized pores (D50 = 0.4 μm) on the foam's struts and to limit grain growth to a grain size of ~1 μm. The structural characteristics were confirmed by porosimetry and scanning electron microscopy. The foams were repeatedly cycled, producing approximately 200 μmol/g of H 2 per cycle. Water splitting performance was tested for 50 cycles and approximately 35 h at 1400 °C. No statistical difference in the effective hydrogen production per cycle was observed, which is promising for long-term redox cycle stability.

08 HYDROGEN↗