Search NASA⌕ Search

SEARCH · Search NASA

Results for “triangularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Sensitivity analysis of ring-shaped slotted photonic crystal waveguides for mid-infrared refractive index sensing

In this paper, the sensitivity of slotted photonic crystal waveguides (SPCW) with triangular lattice pattern of ring-shaped holes is analyzed in order to realize highly refractive index (RI) sensor devices at mid-infrared wavelengths. The sensing principle is based on the shift of the transmission spectrum edge of these specific ring hole SPCW waveguides giving rise to reinforced light–matter interaction. The 3D simulation results applied to silicon waveguides on membrane show that this guide geometry leads to a very high sensitivity to variations in the ambient environment index, with very dependent trends on the opto-geometric factors of the waveguides. As a matter of example, a 720 nm wavelength position band edge shift is predicted, corresponding to a sensitivity of more than 1450 nm per refractive index unit with a device insertion loss level of − 3 dB.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Friction Stir Welding of Al-B{sub 4}C Composite Fabricated by Accumulative Roll Bonding: Evaluation of Microstructure and Mechanical Behavior

In this investigation, friction stir welding (FSW) of Al-B{sub 4}C composite fabricated by 10 cycles accumulative roll bonding was conducted. In order to investigate the influences of pin geometry on microstructure and mechanical properties, four different pin geometries (cylindrical, square, triangular and hexagonal) were selected. It was found that FSW parameters had a major effect on the fragmentation and distribution of reinforcement particles in stir zone. When the tool travel speed was increased, the distribution of B{sub 4}C particles was become gradually uniform in the aluminum matrix. The effect of tool rotational speed on the peak temperature was determined to be greater than the tool travel speed. The attained data of tensile properties and microhardness tests showed that the tool travel speed had bilateral effect on the tensile strength. The maximum tensile joint efficiency was obtained as 238% for FSWed of Al-2%B{sub 4}C composite to annealed base Al sheet.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Investigation of Mild Steel Thin-Wall Tubes in Unfilled and Foam-Filled Triangle, Square, and Hexagonal Cross Sections Under Compression Load

This study has examined proposed structures with mild steel-reinforced LM30 aluminum (Al) alloy having diversely unfilled and 10 wt.% SiCp composite foam-filled tubes for improving axial compression performance. This class of material has novel physical, mechanical, and electrical properties along with low density. In the present experiment, Al alloy foams were prepared by the melt route technique using metal hydride powder as a foaming agent. Crash energy phenomena for diverse unfilled and foam-filled in mild steel thin-wall tubes (triangular, square and hexagonal) were studied as well. Compression deformation investigation was conducted at strain rates of 0.001-0.1/s for evaluating specific energy absorption (SEA) under axial loading conditions. The results were examined to measure plateau stress, maximum densification strain, and deformation mechanism of the materials. Specific energy absorption and total energy absorption capacities of the unfilled and filled sections were determined from the compressive stress–strain curves, which were then compared with each other.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The generalized Uzawa-SHSS method for non-Hermitian saddle-point problems

Recently, Li and Wu (2015) proposed the single-step Hermitian and skew-Hermitian splitting (SHSS) method for solving the non-Hermitian positive definite linear systems. Based on the single-step Hermitian and skew-Hermitian splitting of the (1,1) part of the saddle-point coefficient matrix, a new Uzawa-type method is proposed for solving a class of saddle-point problems with non-Hermitian positive definite (1,1) parts. Convergence (Semi-convergence) properties of this new method for nonsingular (singular) are derived under suitable conditions. Numerical examples are implemented to confirm the theoretical results and verify that this new method is more feasibility and robustness than the new HSS-like (NHSS-like), the Uzawa-HSS and the parameterized Uzawa-skew-Hermitian triangular splitting (PU-STS) methods for solving both the nonsingular and the singular saddle-point problems with non-Hermitian positive definite and Hermitian dominant (1,1) parts.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

GSTS-Uzawa method for a class of complex singular saddle point problems

In this paper, we propose GSTS–Uzawa method for solving a class of complex singular saddle point problems based on generalized skew-Hermitian triangular splitting (GSTS) iteration method and classical Uzawa method. We research on its semi-convergence properties and the eigenvalues distributions of its preconditioned matrix. The resulting GSTS–Uzawa preconditioner is used to precondition Krylov subspace methods such as the restarted generalized minimal residual (GMRES) method for solving the equivalent formulation of the complex singular saddle point problems. The theoretical results and effectiveness of the GSTS–Uzawa method are supported by a numerical example.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Variational multiscale element-free Galerkin method combined with the moving Kriging interpolation for solving some partial differential equations with discontinuous solutions

Solving partial differential equations with discontinuous solutions is an important challenging problem in numerical analysis. To this end, there are some methods such as finite volume method, discontinuous Galerkin approach and particle technique that are able to solve these problems. In the current paper, the moving Kriging element-free Galerkin method has been combined with the variational multiscale algorithm to obtain acceptable and high-resolution solutions. For testing this technique, we select some PDEs with discontinuous solution such as Burgers’, Sod’s shock tube, advection–reaction–diffusion, Kuramoto–Sivashinsky, Boussinesq and shallow water equations. First, we obtain a time-discrete scheme by approximating time derivative via finite difference technique. Then we introduce the moving Kriging interpolation and also obtain their shape functions. We use the element-free Galerkin method for approximating the spatial derivatives. This method uses a weak form of the considered equation that is similar to the finite element method with the difference that in the classical element-free Galerkin method test and trial functions are moving least squares approximation (MLS) shape functions. Since the shape functions of moving least squares (MLS) approximation do not have Kronecker delta property, we cannot implement the essential boundary condition, directly. Thus, we employ the shape functions of moving Kriging interpolation and radial point interpolation technique which have the mentioned property. Also, in the element-free Galekin method, we do not use any triangular, quadrangular or other type of meshes. The element-free Galerkin method is a global method while finite element method is a local one. This technique employs a background mesh for integration which makes it different from the truly mesh procedures. Several test problems are solved and numerical simulations are reported which confirm the efficiency of the proposed schemes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Crank–Nicolson WSGI difference scheme with finite element method for multi-dimensional time-fractional wave problem

In this article, a second-order Crank–Nicolson weighted and shifted Grünwald integral (WSGI) time-discrete scheme combined with finite element method is studied for finding the numerical solution of the multi-dimensional time-fractional wave equation. The time-fractional wave equation with Caputo-fractional derivative is transformed into the time-fractional integral equation by integral technique, then the second-order Crank–Nicolson finite element scheme with a time second-order WSGI discrete approximation for fractional integral is formulated. The analysis of stability is made, then a priori error estimate is given by making use of the conversion technique between the WSGI formula and fractional integral. At the end of the article, some numerical examples covering two two-dimensional cases with rectangular element and triangular element and a three-dimensional case with tetrahedral element are shown to test and verify our theoretical results.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Magnetic field effects on the quantum spin liquid behaviors of NaYbS 2

Spin-orbit coupling is an important ingredient to regulate the many-body physics, especially for many spin liquid candidate materials such as rare-earth magnets and Kitaev materials. The rare-earth chalcogenides NaYbCh 2 (Ch = O, S, Se) is a congenital frustrating system to exhibit the intrinsic landmark of spin liquid by eliminating both the site disorders between Na + and Yb 3+ ions with the big ionic size difference and the Dzyaloshinskii-Moriya interaction with the perfect triangular lattice of the Yb 3+ ions. The temperature versus magnetic-field phase diagram is established by the magnetization, specific heat, and neutron-scattering measurements. Notably, the neutron diffraction spectra and the magnetization curve might provide microscopic evidence for a series of spin configuration for in-plane fields, which include the disordered spin liquid state, 120° antiferromagnet, and one-half magnetization state. Furthermore, the ground state is suggested to be a gapless spin liquid from inelastic neutron scattering, and the magnetic field adjusts the spin orbit coupling. Therefore, the strong spin-orbit coupling in the frustrated quantum magnet substantially enriches low-energy spin physics. This rare-earth family could offer a good platform for exploring the quantum spin liquid ground state and quantum magnetic transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

A novel additive manufacturing compression overmolding process for hybrid metal polymer composite structures

Metal polymer composites combining low density, high strength composites with highly ductile and tough metals have gained traction over the last few decades as lightweight and high-performance materials for industrial applications. However, the mechanical properties are limited by the interfacial bonding strength between metals and polymers achieved through adhesives, welding, and surface treatment processes. In this paper, a novel manufacturing process combining additive manufacturing and compression molding to obtain hybrid metal polymer composites with enhanced mechanical properties is presented. Additive manufacturing enabled deposition of polymeric material with fibers in a predetermined pattern to form tailored charge or preform for compression molding. Here, a grade 300 maraging steel triangular lattice is first fabricated using AddUp FormUp350 laser powder bed system and compression overmolded with additively manufactured long carbon fiber-reinforced polyamide-6,6 (40% wt. CF/PA66) preform. The fabricated hybrid metal polymer composites showed high stiffness and tensile strength. The stiffness and failure characteristics determined from the uniaxial tensile tests were correlated to a finite element model within 20% deviation. Fractographic analyses was performed using microscopy to investigate failure mechanisms of the hybrid structures.

36 MATERIALS SCIENCE↗
DOE OSTI2016

A practical model for fluid flow in discrete-fracture porous media by using the numerical manifold method

Here in this study, a numerical manifold method (NMM) model is developed to analyze flow in porous media with discrete fractures in a non-conforming mesh. This new model is based on a two-cover-mesh system with a uniform triangular mathematical mesh and boundary/fracture-divided physical covers, where local independent cover functions are defined. The overlapping parts of the physical covers are elements where the global approximation is defined by the weighted average of the physical cover functions. The mesh is generated by a tree-cutting algorithm. A new model that does not introduce additional degrees of freedom (DOF) for fractures was developed for fluid flow in fractures. The fracture surfaces that belong to different physical covers are used to represent fracture flow in the direction of the fractures. In the direction normal to the fractures, the fracture surfaces are regarded as Dirichlet boundaries to exchange fluxes with the rock matrix. Furthermore, fractures that intersect with Dirichlet or Neumann boundaries are considered. Simulation examples are designed to verify the efficiency of the tree-cutting algorithm, the calculation's independency from the mesh orientation, and accuracy when modeling porous media that contain fractures with multiple intersections and different orientations. The simulation results show good agreement with available analytical solutions. Finally, the model is applied to cases that involve nine intersecting fractures and a complex network of 100 fractures, both of which achieve reasonable results. The new model is very practical for modeling flow in fractured porous media, even for a geometrically complex fracture network with large hydraulic conductivity contrasts between fractures and the matrix.

58 GEOSCIENCES↗
DOE OSTI2017

Characterizing the impact of model error in hydrologic time series recovery inverse problems

Hydrologic models are commonly over-smoothed relative to reality, owing to computational limitations and to the difficulty of obtaining accurate high-resolution information. When used in an inversion context, such models may introduce systematic biases which cannot be encapsulated by an unbiased “observation noise” term of the type assumed by standard regularization theory and typical Bayesian formulations. Despite its importance, model error is difficult to encapsulate systematically and is often neglected. In this paper, model error is considered for an important class of inverse problems that includes interpretation of hydraulic transients and contaminant source history inference: reconstruction of a time series that has been convolved against a transfer function (i.e., impulse response) that is only approximately known. Using established harmonic theory along with two results established here regarding triangular Toeplitz matrices, upper and lower error bounds are derived for the effect of systematic model error on time series recovery for both well-determined and over-determined inverse problems. It is seen that use of additional measurement locations does not improve expected performance in the face of model error. A Monte Carlo study of a realistic hydraulic reconstruction problem is presented, and the lower error bound is seen informative about expected behavior. Finally, a possible diagnostic criterion for blind transfer function characterization is also uncovered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Asymptotic convergence of the angular discretization error in the scalar flux computed from the particle transport equation with the method of discrete ordinates

The asymptotic convergence of the angular discretization error in the scalar flux solution of the particle transport equation computed with the Discrete Ordinates (S N ) method with increasing quadrature order is examined. Five selected angular quadrature types are considered: Level Symmetric (LS), Legendre-Chebyshev Quadrangular (LCQ), Legendre-Chebyshev Triangular(LCT), Quadruple Range (QR) and Quadruple Range Spence-type (QRS) quadrature sets. We relate the S N angular discretization error to the quadrature error, and split the total flux into the uncollided flux and the fully collided flux, and then we verify the uncollided scalar flux error and the fully collided scalar flux error separately. After developing the theoretical basis for the relationship between true solution regularity and quadrature rule error, we employ a two-dimensional problem to verify the observed and theoretical convergence orders for the region-averaged uncollided and fully collided scalar flux errors. Numerical results show that the angular discretization errors in the region-averaged scalar flux obtained by different quadrature types converge with different rates, that are commensurate with the regularity order of the exact angular flux within the quadrature-designed integration interval. The angular discretization error in the uncollided region-averaged scalar flux obtained by LC class quadratures converges linearly, and the error obtained by QR class quadrature sets converges quadratically. The angular discretization error in the fully collided region-averaged scalar flux converges linearly for LC class quadratures, and faster-than-second order for QR class quadrature sets.

42 ENGINEERING↗
DOE OSTI2017

Solution to the sign problem in a frustrated quantum impurity model

In this work we solve the sign problem of a frustrated quantum impurity model consisting of three quantum spin-half chains interacting through an anti-ferromagnetic Heisenberg interaction at one end. We first map the model into a repulsive Hubbard model of spin-half fermions hopping on three independent one dimensional chains that interact through a triangular hopping at one end. We then convert the fermion model into an inhomogeneous one dimensional model and express the partition function as a weighted sum over fermion worldline configurations. By imposing a pairing of fermion worldlines in half the space we show that all negative weight configurations can be eliminated. This pairing naturally leads to the original frustrated quantum spin model at half filling and thus solves its sign problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

A Hermitian symmetric space Fokas–Lenells equation: Solitons, breathers, rogue waves

Highlights: • We study a Hermitian symmetric space Fokas–Lenells equation. • We obtain multi-soliton, kink–breather and rogue wave solutions for this equation. • We analyse the dynamical behaviour of these exact solutions. - Abstract: Based on the zero-curvature representation, we propose a Hermitian symmetric space Fokas–Lenells equation associated with a 4 × 4 matrix spectral problem. Resorting to the gauge transformation between spectral problems, we find a restrictive condition of the spectral functions that can ensure the symmetry of the new potential matrix, from which n-fold classical Darboux transformations and N-fold generalized Darboux transformations of this equation are constructed with the help of the limit technique and an iterative procedure. Utilizing the Darboux transformations and Mathematica software, we obtain various solutions for the Hermitian symmetric space Fokas–Lenells equation, including the multi-soliton solution, kink–breather solution, eye-shaped rogue wave solution, one-peaky shaped rogue wave solution, and dark two-peaky shaped rogue wave solution. By varying the values of the free parameters, we obtain different types of spatial–temporal distribution structures for the solutions, including the fundamental, line and triangular patterns. Furthermore, the dynamical behaviour of these solutions, including the fusion and fission processes of rogue waves, is analysed in detail.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Critical density of topological defects upon a continuous phase transition

Using extensive Monte Carlo simulations, we test the hypothesis that the density of corresponding topological defects has a universal value at the temperature of a continuous phase transition. We consider several simple two-dimensional models where domain walls, vortices, so-called Z{sub 2} vortices or their combinations are presented. These topological defects are relevant correspondingly to an Ising second-order phase transition, a Berezinskii–Kosterlitz–Thouless transition and an explicit crossover. We compare results for square and triangular lattices as well as for the complicated situation when two types of defects are presented and two transitions occur separated in temperature. All considered cases demonstrate consentient results confirming the hypothesis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Learning Topological Operations on Meshes with Application to Block Decomposition of Polygons

We present a learning based framework for mesh quality improvement on unstructured triangular and quadrilateral meshes. Our model learns to improve mesh quality according to a prescribed objective function purely via self-play reinforcement learning with no prior heuristics. The actions performed on the mesh are standard local and global element operations. The goal is to minimize the deviation of the node degrees from their ideal values, which in the case of interior vertices leads to a minimization of irregular nodes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Efficient solvers for hybridized three-field mixed finite element coupled poromechanics

We consider a mixed hybrid finite element formulation for coupled poromechanics. A stabilization strategy based on a macro-element approach is advanced to eliminate the spurious pressure modes appearing in undrained/incompressible conditions. The efficient solution of the stabilized mixed hybrid block system is addressed by developing a class of block triangular preconditioners based on a Schur-complement approximation strategy. Robustness, computational efficiency and scalability of the proposed approach are theoretically discussed and tested using challenging benchmark problems on massively parallel architectures.

42 ENGINEERING↗
DOE OSTI2020

A macro-scale ruck and tuck mechanism for deformation in ion-irradiated polycrystalline graphite

A vein structure, which becomes more pronounced with increasing ion dose, was found on the surface of polycrystalline HOPG (highly oriented pyrolytic graphite) implanted by ex situ C + (up to 1.8 × 10 17 ions/cm 2 ), and in situ Ar + in a transmission electron microscope (TEM). These veins are found to be independent of the crystallographic orientations and are associated with the formation of pores. Underneath the veins, a triangular-shaped core was formed with the graphite platelet inside the core displaced up towards the surface. A macro-scale ‘ruck&tuck’ geometry was thus generated at these triangle structure boundaries. Progressive movement of dislocations along basal planes during irradiation was observed, and a mechanistic model was proposed on this basis to explain the vein formation. A small increase of c-spacing was observed with irradiation but it is believed that macro-scale vein formation plays a more vital role in the dimensional and property changes in polycrystalline graphite, especially when a stress gradient is present. Here, the model proposed also explains the change of thermal expansion in HOPG with irradiation. Together with Heggie’s ‘ruck&tuck’ and Barsoum’s ‘ripplocations’ models, the present model is considered to have provided an additional experimentally proven mechanism responsible for irradiation behaviour in graphite materials.

36 MATERIALS SCIENCE↗