Search NASA⌕ Search

SEARCH · Search NASA

Results for “variability study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Possible Presence of a Third Body in the Kepler K2 Variable EPIC 202073314

We report the presence of an unseen third-body companion in a low-mass-ratio deep contact binary system Kepler K2 EPIC 202073314 as seen by the presence of the light time effect (LITE) on the O–C diagram. The system is found to be exhibiting an increasing period trend along with a sinusoidal behavior of the O–C residuals owing to the LITE variations. The residuals are modeled initially assuming a circular orbit to obtain a third-body orbital period of ∼9.75 years. We further performed a rigorous analysis by allowing the eccentricity to vary, which led to a third-body orbital period of ∼8.66 years with e {sub 3} = 0.51. We also report the photometric study of this variable. The system is found to have a mass ratio of ∼0.15 with an inclination of ∼77°. Monte-Carlo simulations were performed to verify the consistency of the obtained photometric solution. The system is considered to be in significant geometrical contact as seen by the high fill-out factor of ∼57%. Magnetic inactivity of the system is understood in terms of the absence of O’ Connell effect and lack of fill-in effect in the Hα spectral line. The dynamical state of the system is discussed in terms of the Hut’s stability criteria (((J{sub spin})/(J{sub orb}))=(1/3)) as the low-mass and high fill-out factor configuration of the system makes it a promising candidate in the context of stellar mergers. Assuming conservative mass transfer, the system is expected to meet the critical mass ratio of ∼0.07–0.09 in ∼10{sup 6} years.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of V2 Antibody Responses Induced in Vaccinees in the ALVAC/AIDSVAX HIV-1 Vaccine Efficacy Trial

The RV144 clinical trial of a prime/boost immunizing regimen using recombinant canary pox (ALVAC-HIV) and two gp120 proteins (AIDSVAX B and E) was previously shown to have a 31.2% efficacy rate. Plasma specimens from vaccine and placebo recipients were used in an extensive set of assays to identify correlates of HIV-1 infection risk. Of six primary variables that were studied, only one displayed a significant inverse correlation with risk of infection: the antibody (Ab) response to a fusion protein containing the V1 and V2 regions of gp120 (gp70-V1V2). This finding prompted a thorough examination of the results generated with the complete panel of 13 assays measuring various V2 Abs in the stored plasma used in the initial pilot studies and those used in the subsequent case-control study. The studies revealed that the ALVACHIV/AIDSVAX vaccine induced V2-specific Abs that cross-react with multiple HIV-1 subgroups and recognize both conformational and linear epitopes. The conformational epitope was present on gp70-V1V2, while the predominant linear V2 epitope mapped to residues 165–178, immediately N-terminal to the putative a4b7 binding motif in the mid-loop region of V2. Odds ratios (ORs) were calculated to compare the risk of infection with data from 12 V2 assays, and in 11 of these, the ORs were #1, reaching statistical significance for two of the variables: Ab responses to gp70-V1V2 and to overlapping V2 linear peptides. It remains to be determined whether anti-V2 Ab responses were directly responsible for the reduced infection rate in RV144 and whether anti-V2 Abs will prove to be important with other candidate HIV vaccines that show efficacy, however, the results support continued dissection of Ab responses to the V2 region which may illuminate mechanisms of protection from HIV-1 infection and may facilitate the development of an effective HIV-1 vaccine.

59 BASIC BIOLOGICAL SCIENCES↗

Kiloampere, Variable-Temperature, Critical-Current Measurements of High-Field Superconductors

We review variable-temperature, transport critical-current ($I_\text{c}$) measurements made on commercial superconductors over a range of critical currents from less than 0.1 A to about 1 kA. We have developed and used a number of systems to make these measurements over the last 15 years. Two exemplary variable-temperature systems with coil sample geometries will be described: a probe that is only variable-temperature and a probe that is variable-temperature and variable-strain. The most significant challenge for these measurements is temperature stability, since large amounts of heat can be generated by the flow of high current through the resistive sample fixture. Therefore, a significant portion of this review is focused on the reduction of temperature errors to less than ±0.05 K in such measurements. A key feature of our system is a pre-regulator that converts a flow of liquid helium to gas and heats the gas to a temperature close to the target sample temperature. The pre-regulator is not in close proximity to the sample and it is controlled independently of the sample temperature. This allows us to independently control the total cooling power, and thereby fine tune the sample cooling power at any sample temperature. The same general temperature-control philosophy is used in all of our variable temperature systems, but the addition of another variable, such as strain, forces compromises in design and results in some differences in operation and protocol. These aspects are analyzed to assess the extent to which the protocols for our systems might be generalized to other systems at other laboratories. Our approach to variable-temperature measurements is also placed in the general context of measurement-system design, and the perceived advantages and disadvantages of design choices are presented. To verify the accuracy of the variable-temperature measurements, we compared critical-current values obtained on a specimen immersed in liquid helium (“liquid” or $I_{\text{c}}$ $_{\text{liq}}$) at 5 K to those measured on the same specimen in flowing helium gas (“gas” or Ic gas) at the same temperature. These comparisons indicate the temperature control is effective over the superconducting wire length between the voltage taps, and this condition is valid for all types of sample investigated, including Nb-Ti, Nb 3 Sn, and MgB 2 wires. The liquid/gas comparisons are used to study the variable-temperature measurement protocol that was necessary to obtain the “correct” critical current, which was assumed to be the $I_{\text{c}}$ $_{\text{liq}}$. We also calibrated the magnetoresistance effect of resistive thermometers for temperatures from 4 K to 35 K and magnetic fields from 0 T to 16 T. This calibration reduces systematic errors in the variable-temperature data, but it does not affect the liquid/gas comparison since the same thermometers are used in both cases.

47 OTHER INSTRUMENTATION↗

THE MAGELLANIC QUASARS SURVEY. II. CONFIRMATION OF 144 NEW ACTIVE GALACTIC NUCLEI BEHIND THE SOUTHERN EDGE OF THE LARGE MAGELLANIC CLOUD

We quadruple the number of quasars known behind the Large Magellanic Cloud (LMC) from 56 (42 in the Optical Gravitational Lensing Experiment (OGLE)-III LMC fields) to 200 by spectroscopically confirming 169 (144 new) quasars from a sample of 845 observed candidates in four {approx}3 deg{sup 2} Anglo-Australian Telescope/AAOmega fields south of the LMC center. The candidates were selected based on their Spitzer mid-infrared colors, X-ray emission, and/or optical variability properties in the database of the OGLE microlensing survey. The contaminating sources can be divided into 115 young stellar objects (YSOs), 17 planetary nebulae (PNe), 39 Be and 24 blue stars, 68 red stars, and 12 objects classed as either YSO/PN or blue star/YSO. There are also 402 targets with either featureless spectra or too low signal-to-noise ratios for source classification. Our quasar sample is 50% (30%) complete at I = 18.6 mag (19.3 mag). The newly discovered active galactic nuclei (AGNs) provide many additional reference points for proper motion studies of the LMC, and the sample includes 10 bright AGNs (I < 18 mag) that are potentially suitable for absorption line studies. Their primary use, however, is for detailed studies of quasar variability, as they all have long-term, high cadence, continuously growing light curves from the microlensing surveys of the LMC. Completing the existing Magellanic Quasars Survey fields in the LMC and Small Magellanic Cloud should yield a sample of {approx}700 well-monitored AGNs, and expanding it to the larger regions covered by the OGLE-IV survey should yield a sample of {approx}3600 AGNs.

79 ASTRONOMY AND ASTROPHYSICS↗

Pre-training Vision Models for the Classification of Alerts from Wide-field Time-domain Surveys

Modern wide-field time-domain surveys facilitate the study of transient, variable and moving phenomena by conducting image differencing and relaying alerts to their communities. Machine learning tools have been used on data from these surveys and their precursors for more than a decade, and convolutional neural networks (CNNs), which make predictions directly from input images, saw particularly broad adoption through the 2010s. Since then, continually rapid advances in computer vision have transformed the standard practices around using such models. It is now commonplace to use standardized architectures pre-trained on large corpora of everyday images (e.g., ImageNet). In contrast, time-domain astronomy studies still typically design custom CNN architectures and train them from scratch. Here, we explore the effects of adopting various pre-training regimens and standardized model architectures on the performance of alert classification. We find that the resulting models match or outperform a custom, specialized CNN like what is typically used for filtering alerts. Moreover, our results show that pre-training on galaxy images from Galaxy Zoo tends to yield better performance than pre-training on ImageNet or training from scratch. We observe that the design of standardized architectures are much better optimized than the custom CNN baseline, requiring significantly less time and memory for inference despite having more trainable parameters. On the eve of the Legacy Survey of Space and Time and other image-differencing surveys, these findings advocate for a paradigm shift in the creation of vision models for alerts, demonstrating that greater performance and efficiency, in time and in data, can be achieved by adopting the latest practices from the computer vision field.

79 ASTRONOMY AND ASTROPHYSICS↗

Structures and crystal chemistry of the double perovskites Ba{sub 2}LnB'O{sub 6} (Ln=lanthanide and B'=Nb, Ta):

The structures of eight members of the series of double perovskites of the type Ba{sub 2}LnB'O{sub 6} (Ln=La{sup 3+}-Sm{sup 3+} and Y{sup 3+} and B'=Nb{sup 5+} and Ta{sup 5+}) were examined both above and below room temperature using synchrotron X-ray powder diffraction. The La{sup 3+} and Pr{sup 3+} containing compounds had an intermediate rhombohedral phase whereas the other tantalates and niobates studied have a tetragonal intermediate. This difference in symmetry appears to be a consequence of the larger size of the La{sup 3+} and Pr{sup 3+} cations compared to the other lanthanides. The temperature range over which the intermediate symmetry is stable is reduced in those compounds near the point where the preferred intermediate symmetry changes from tetragonal to rhombohedral. In such compounds the transition to the cubic phase involves higher order terms in the Landau expression. This suggests that in this region the stability of the two intermediate phases is similar. - Graphical abstract: Variable temperature structural studies of Ba{sub 2}LaTaO{sub 6} show the presence of a unexpected rhombohedral phase. Other Ba{sub 2}LnB'O{sub 6} (B'=Nb, Ta) have a tetragonal intermediate phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Functional approach to exploring climatic and landscape controls on runoff generation: 2 Timing of runoff storm response

Abstract Hortonian overland flow, Dunne overland flow, and subsurface stormflow are the three most dominant mechanisms contributing to both the volume and timing of streamflow in headwater catchments. In this paper, guided by the Dunne diagram, we explore the impacts of climate, soil, and topography on estimated probability distributions of the travel times of each of these three runoff components. In each case, these are expressed in terms of the Connected Instantaneous Response Functions (CIRF) and account for the dynamics of their individual partial effective contributing areas that retain the connectivity to the outlet (instead of the whole catchment area). A spatially distributed hydrological model is used to derive the CIRFs numerically under multiple combinations of climate, soil, and topographic properties. The mean travel times and dimensionless forms of the CIRFs (i.e., scaled by their respective mean travel times) are used to examine both advective and dispersive aspects of catchment's runoff routing response. It is found that the CIRFs, upon nondimensionalization, collapsed to common characteristic shapes, which could be explained in terms of the relative contributions of hillslope and channel network flows, and the size of runoff contributing areas. The contributing areas, particularly for the Dunne overland flow, are themselves found to be governed by the competition between drainage of and recharge to the water table, and could be explained by a dimensionless drainage index which quantifies this competition. The study also reveals simple indicators based on landscape properties that can explain the magnitude of travel times in different catchments.

Li, Hong‐Yi↗

Parallel application-level behavioral attributes for performance and energy management of high-performance computing systems

Run time variability of parallel applications continues to present significant challenges to their performance and energy efficiency in high-performance computing (HPC) systems. When run times are extended and unpredictable, application developers perceive this as a degradation of system (or subsystem) performance. Extended run times directly contribute to proportionally higher energy consumption, potentially negating efforts by applications, or the HPC system, to optimize energy consumption using low-level control techniques, such as dynamic voltage and frequency scaling (DVFS). Therefore, successful systemic management of application run time performance can result in less wasted energy, or even energy savings. We have been studying run time variability in terms of communication time, from the perspective of the application, focusing on the interconnection network. More recently, our focus has shifted to developing a more complete understanding of the effects of HPC subsystem interactions on parallel applications. In this context, the set of executing applications on the HPC system is treated as a subsystem, along with more traditional subsystems like the communication subsystem, storage subsystem, etc. To gain insight into the run time variability problem, our earlier work developed a framework to emulate parallel applications (PACE) that stresses the communication subsystem. Evaluation of run time sensitivity to network performance of real applications is performed with a tool called PARSE, which uses PACE. In this paper, we propose a model defining application-level behavioral attributes, that collectively describes how applications behave in terms of their run time performance, as functions of their process distribution on the system (spacial locality), and subsystem interactions (communication subsystem degradation). These subsystem interactions are produced when multiple applications execute concurrently on the same HPC system. We also revisit our evaluation framework and tools to demonstrate the flexibility of our application characterization techniques, and the ease with which attributes can be quantified. The validity of the model is demonstrated using our tools with several parallel benchmarks and application fragments. Results suggest that it is possible to articulate application-level behavioral attributes as a tuple of numeric values that describe course-grained performance behavior.

Computer Science↗

The High-resolution Urban Meteorology for Impacts Dataset (HUMID) daily for the Conterminous United States

Many current gridded surface meteorological datasets are inadequate for quantifying near surface spatiotemporal variability because they do not fully represent the impacts of land surface heterogeneity. Of note, explicit representation of the spatial structure and magnitude of local urban warming are usually lacking. Here we enhance the representation of spatial meteorological variability over urban areas in the conterminous United States (CONUS) by employing the High-Resolution Land Data Assimilation System (HRLDAS), which accounts for the fine-scale impacts of spatiotemporally varying land surfaces on weather. We also synthesize in situ meteorological data including local mesonets to create a 1 km grid spacing model-observation fusion product spanning 1981-2018 over the CONUS. Daily maximum, minimum, and mean values for a variety of temperature estimates, humidity, and surface energy budget terms, among others, are included. This High-resolution Urban Meteorology for Impacts Dataset (HUMID) will be useful for studies examining spatial variability of near surface meteorology and the impacts of urban heat islands across many disciplines including epidemiology, ecology, and climatology.

54 ENVIRONMENTAL SCIENCES↗

High-Field Ignition-Capable Stellarator i-ASTER: Initial Structural Evaluation

i-ASTER is a preliminary conceptual design of a high-field pulsed experimental stellarator aimed essentially at achieving and understanding plasma ignition. The averaged magnetic field on the axis of i-ASTER.v1 is B ~ 10 T and the plasma volume is 30 m 3 . A toroidal monolithic support structure, which is located externally to the modular coils, is defined to accurately arrange the coils and withstand the magnetic Lorentz forces from the high magnetic fields. The magnetic field in the coils and the resulting Lorentz forces on the coils were calculated and utilized for the stress calculation in monolithic support of constant thickness. Subsequently, a monolithic support of variable thickness is proposed and studied. The thickness of the structure is variable and adjusted to the magnitude of the mechanical stress in each area of the toroidal structure so as to smooth the stresses while minimizing the quantity of material used. A fabrication method for the monolithic structure has been tested. For that, a scaled-down mock-up of one period of stellarator has been additively manufactured and strengthened with fiber-reinforced resin. Unsurmountable difficulties have not been found for this fabrication method.

Queral, Vicente↗

A Finite-Time Ensemble Method for Mixed Layer Model Comparison

Here, this work evaluates the fidelity of various upper-ocean turbulence parameterizations subject to realistic monsoon forcing and presents a finite-time ensemble vector (EV) method to better manage the design and numerical principles of these parameterizations. The EV method emphasizes the dynamics of a turbulence closure multimodel ensemble and is applied to evaluate 10 different ocean surface boundary layer (OSBL) parameterizations within a single-column (SC) model against two boundary layer large-eddy simulations (LES). Both LES include realistic surface forcing, but one includes wind-driven shear turbulence only, while the other includes additional Stokes forcing through the wave-average equations that generate Langmuir turbulence. The finite-time EV framework focuses on what constitutes the local behavior of the mixed layer dynamical system and isolates the forcing and ocean state conditions where turbulence parameterizations most disagree. Identifying disagreement provides the potential to evaluate SC models comparatively against the LES. Observations collected during the 2018 monsoon onset in the Bay of Bengal provide a case study to evaluate models under realistic and variable forcing conditions. The case study results highlight two regimes where models disagree 1) during wind-driven deepening of the mixed layer and 2) under strong diurnal forcing.

54 ENVIRONMENTAL SCIENCES↗

Pyrogenic Organic Matter Laboratory Experiment: Aerobic Respiration and Geochemistry from Variably Inundated Stream Sediments (v3)

This dataset supports a broader study examining the effects of variable inundation and pyrogenic organic matter on ecosystem respiration. The dataset provides data generated from a laboratory batch experiment investigating the interaction between variable inundation conditions (wet and dry sediment) and pyrogenic organic matter (burned and unburned treatments). The contents include time series dissolved oxygen, sediment geochemistry data, and field metadata (including qualitative information on instream and river corridor characteristics). This data package was originally published in November 2025. It was updated in April 2026 (v2; new and modified files) and May 2026 (v3; modified files). See the change history section in the readme for more details For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions. This dataset is comprised of (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) international generic sample number (IGSN) mapping file; (5) readme; (6) field protocol; (7) sample name metadata; (8) an environmental context picture for the dry and inundated sampling locations; and (9) a subfolder with sample data from the sediment incubation experiment. The sample data subfolder contains (1) dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC); (2) total nitrogen (TN); (3) gravimetric moisture; (4) partial pressure and production rates of carbon dioxide, methane, and nitrous oxide; (5) field wet sediment mass, dry sediment mass, water mass, and field wet sediment volume in incubation and sediment NPOC/TN vials; (6) methods codes; (7) respiration rates, pH, and temperature from after the incubation, raw time series dissolved oxygen and temperature, and a subfolder containing associated plots and scripts; (8) ions; (9) FTICR-MS methods; and (10) a subfolder of 12 Tesla (12T) FTICR-MS data. This folder contains the CoreMS processed data and three subfolders, one containing the .xml files, one containing the CoreMS output files, and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS). All files are .csv, .pdf, .R, .xml, .html, .Rmd, .py, .cal, .json, or .jpg.

54 ENVIRONMENTAL SCIENCES↗

Optimal control system design of an acid gas removal unit for an IGCC power plants with CO2 capture

Future IGCC plants with CO{sub 2} capture should be operated optimally in the face of disturbances without violating operational and environmental constraints. To achieve this goal, a systematic approach is taken in this work to design the control system of a selective, dual-stage Selexol-based acid gas removal (AGR) unit for a commercial-scale integrated gasification combined cycle (IGCC) power plant with pre-combustion CO{sub 2} capture. The control system design is performed in two stages with the objective of minimizing the auxiliary power while satisfying operational and environmental constraints in the presence of measured and unmeasured disturbances. In the first stage of the control system design, a top-down analysis is used to analyze degrees of freedom, define an operational objective, identify important disturbances and operational/environmental constraints, and select the control variables. With the degrees of freedom, the process is optimized with relation to the operational objective at nominal operation as well as under the disturbances identified. Operational and environmental constraints active at all operations are chosen as control variables. From the results of the optimization studies, self-optimizing control variables are identified for further examination. Several methods are explored in this work for the selection of these self-optimizing control variables. Modifications made to the existing methods will be discussed in this presentation. Due to the very large number of candidate sets available for control variables and due to the complexity of the underlying optimization problem, solution of this problem is computationally expensive. For reducing the computation time, parallel computing is performed using the Distributed Computing Server (DCS®) and the Parallel Computing® toolbox from Mathworks®. The second stage is a bottom-up design of the control layers used for the operation of the process. First, the regulatory control layer is designed followed by the supervisory control layer. Finally, an optimization layer is designed. In this paper, the proposed two-stage control system design approach is applied to the AGR unit for an IGCC power plant with CO{sub 2} capture. Aspen Plus Dynamics® is used to develop the dynamic AGR process model while MATLAB is used to perform the control system design and for implementation of model predictive control (MPC).

97 MATHEMATICS AND COMPUTING↗

The 2-79 keV X-ray spectrum of the Circinus galaxy with NuSTAR, XMM-Newton, and Chandra: a fully Compton-thick active galactic nucleus

The Circinus galaxy is one of the closest obscured active galactic nuclei (AGNs), making it an ideal target for detailed study. Combining archival Chandra and XMM-Newton data with new NuSTAR observations, we model the 2-79 keV spectrum to constrain the primary AGN continuum and to derive physical parameters for the obscuring material. Chandra's high angular resolution allows a separation of nuclear and off-nuclear galactic emission. In the off-nuclear diffuse emission, we find signatures of strong cold reflection, including high equivalent-width neutral Fe lines. This Compton-scattered off-nuclear emission amounts to 18% of the nuclear flux in the Fe line region, but becomes comparable to the nuclear emission above 30 keV. The new analysis no longer supports a prominent transmitted AGN component in the observed band. We find that the nuclear spectrum is consistent with Compton scattering by an optically thick torus, where the intrinsic spectrum is a power law of photon index Γ = 2.2-2.4, the torus has an equatorial column density of N {sub H} = (6-10) × 10{sup 24} cm{sup –2}, and the intrinsic AGN 2-10 keV luminosity is (2.3-5.1) × 10{sup 42} erg s{sup –1}. These values place Circinus along the same relations as unobscured AGNs in accretion rate versus Γ and L{sub X} versus L {sub IR} phase space. NuSTAR's high sensitivity and low background allow us to study the short timescale variability of Circinus at X-ray energies above 10 keV for the first time. The lack of detected variability favors a Compton-thick absorber, in line with the spectral fitting results.

79 ASTRONOMY AND ASTROPHYSICS↗

A whole mitochondrial genome screening in a MELAS patient: A novel mitochondrial tRNA{sup Val} mutation

Highlights: {yields} We report a young Tunisian patient with clinical features of MELAS syndrome. {yields} Reported mitochondrial mutations were absent after a mutational screening of the whole mtDNA. {yields} We described a novel m.1640A>G mutation in the tRNA{sup Val} gene which was absent in 150 controls. {yields} Mitochondrial deletions and POLG1 gene mutations were absent. {yields} The m.1640A>G mutation could be associated to MELAS syndrome. -- Abstract: Mitochondrial encephalopathy, lactic acidosis and strokelike episodes (MELAS) syndrome is a mitochondrial disorder characterized by a wide variety of clinical presentations and a multisystemic organ involvement. In this study, we report a Tunisian girl with clinical features of MELAS syndrome who was negative for the common m.3243A>G mutation, but also for the reported mitochondrial DNA (mtDNA) mutations and deletions. Screening of the entire mtDNA genome showed several known mitochondrial variants besides to a novel transition m.1640A>G affecting a wobble adenine in the anticodon stem region of the tRNA{sup Val}. This nucleotide was conserved and it was absent in 150 controls suggesting its pathogenicity. In addition, no mutations were found in the nuclear polymerase gamma-1 gene (POLG1). These results suggest further investigation nuclear genes encoding proteins responsible for stability and structural components of the mtDNA or to the oxidative phosphorylation machinery to explain the phenotypic variability in the studied family.

60 APPLIED LIFE SCIENCES↗

Solar System Gamma Ray observations using Fermi-LAT detector

The Fermi Gamma-ray Space Telescope, launched in June 2008, is an international space mission dedicated to the study of the high-energy gamma rays from the Universe. The main instrument aboard Fermi is the Large Area Telescope (LAT), a pair conversion telescope equipped with the state-of-the art in gamma-ray detectors technology, and operating at energies >30 MeV. During first two months of data taking, Fermi has detected high-energy gamma rays from the quiet Sun and the Moon. This emission is produced by interactions of cosmic rays; by nucleons with the solar and lunar surface, and electrons with solar photons in the heliosphere. While the Moon was detected by EGRET on CGRO with low statistics, Fermi provides high-sensitivity measurements on a daily basis allowing both short- and long-term variability to be studied. Since Galactic cosmic rays are at their maximum flux at solar minimum we expect that the quiescent solar and lunar emission to be a maximum during the period covered by this report. Fermi is the only mission capable of monitoring the Sun at energies above several hundred MeV over the full 24th solar cycle. We present first analysis showing images of Moon and the quiet emission of the solar disk, giving a description of the analysis tools used.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DISTRIBUTION AND RANGE OF RADIONUCLIDE SORPTION COEFFICIENTS IN A SAVANNAH RIVER SITE SUBSURFACE: STOCHASTIC MODELING CONSIDERATIONS

The uncertainty associated with the sorption coefficient, or K{sub d} value, is one of the key uncertainties in estimating risk associated with burying low-level nuclear waste in the subsurface. The objective of this study was to measure >648 K{sub d} values and provide a measure of the range and distribution (normal or log-normal) of radionuclide K{sub d} values appropriate for the E-Area disposal site, within the Savannah River Site, near Aiken South Carolina. The 95% confidence level for the mean K{sub d} was twice the mean in the Aquifer Zone (18-30.5 m depth), equal to the mean for the Upper Vadose Zone (3.3-10 m depth), and half the mean for the Lower Vadose Zone (3.10-18 m depth). The distribution of K{sub d} values was log normal in the Upper Vadose Zone and Aquifer Zone, and normal in the Lower Vadose Zone. To our knowledge, this is the first report of natural radionuclide Kd variability in the literature. Using ranges and distribution coefficients that are specific to the hydrostratigraphic unit improved model accuracy and reduced model uncertainty. Unfortunately, extension of these conclusions to other sites is likely not appropriate given that each site has its own sources of hydrogeological variability. However, this study provides one of the first examples of the development stochastic ranges and distributions of K{sub d} values for a hydrological unit for stochastic modeling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Extinction of Light during the Fog Life Cycle: a Result from the ParisFog Experiment

Data set acquired by five particle-dedicated instruments set up on the SIRTA experimental site during the ParisFog field campaign are exploited to document microphysical properties of particles contributing to extinction of visible radiation in variable situations. The case study is a 48-hour period when atmospheric conditions are highly variable: relative humidity changes between 50 and 100%, visibility ranges between 35000 and 65 m, the site is either downwind Paris area either under maritime influence. A dense and homogeneous fog formed by radiative cooling during the 18-19 February night. In 7 hours, visibility decreases from 26 000 m to 65 m, because of transported pollution (factor 3 in visibility reduction), aerosol hydration (factor 20) and aerosol activation (factor 6). According to Mie theory, extinction in clear-sky polluted and unpolluted regimes is due equally to Aitken and accumulation modes. Extinction in haze is due to hydrated aerosols distributed in the accumulation mode, for diameter smaller than 2 {mu}m. Hydrated aerosols of the accumulation mode still contribute to 20-30% extinction in the fog. Measurements show that fog droplets, with diameter included between 2 and 10 {mu}m, contribute to 40% extinction during the first hours of the fog.

58 GEOSCIENCES↗