Search NASA⌕ Search

SEARCH · Search NASA

Results for “100 % renewables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Complex polycation redox material interfaced with renewable porous carbon for asymmetric supercapacitors

Mixed polycation transition metal ferrites are known to exhibit unique and superior characteristics for structural, electrical, magnetic, and optical applications. Although a few binary transition metal ferrites are found to be suitable for electrochemical energy storage application, ternary transition metal ferrites are not investigated for asymmetric supercapacitors (ASCs). Mixed polycation oxides are expected to have increased active sites that can facilitate proton and electron transfer impacting the redox reactions. Specific crystal structure and associated lattice parameters as well as surface and morphological characteristics can also influence the energy storage properties. This study for the first time reports a novel complex polycation redox material, (Cu p Mn q Zn r ) x Fe y O z and renewable pinewood (PW) derived porous carbon (POC) as electrodes for ASC. Both (Cu p Mn q Zn r ) x Fe y O z and PW-POC are subjected to electrochemical characterization and used in ASC configuration with aqueous KOH electrolyte. It is anticipated that the Faradaic characteristics of (Cu p Mn q Zn r ) x Fe y O z will make it to serve as a cathode while PW-POC with capacitive behavior will act as anode in ASCs. Relatively higher specific capacitance of > 200 F/g is observed for the (Cu p Mn q Zn r ) x Fe y O z reference electrode and fabricated ASCs. Capacitance retention rate is tested in 10,000 cycles for the working electrodes whereas for ASC, the stability tests are performed over 100 charging-discharging cycles exhibiting relatively higher capacitance retention. (Cu p Mn q Zn r ) x Fe y O z appears to be a promising material for a supercapacitor.

(CupMnqZnr)xFeyOz↗
DOE OSTI2026

Unalakleet Microgrid Optimization for Tribal Community Resilience

The Unalakleet Microgrid Optimization Project aimed to strengthen the reliability and efficiency of the isolated electric power system that serves the Tribal community of Unalakleet, Alaska. The community relies entirely on a local wind-diesel microgrid, consisting of four 475 kW diesel generators and six 100 kW wind turbines, to provide electricity to approximately 745 residents and Tribal facilities. Because Unalakleet is not on a road system and is located nearly 400 miles from the nearest major power grid, maintaining a resilient and efficient local energy system is critical. The scope of this project included upgrading a portion of the transmission line between the wind farm and the power plant to increase voltage and reduce line losses, along with modernizing the Supervisory Control and Data Acquisition (SCADA) system to improve monitoring, control, and data management of the power system. These upgrades were designed to increase wind energy utilization, reduce diesel fuel consumption by tens of thousands of gallons annually, and improve overall grid stability. By allowing more of the community’s electricity to be supplied by local renewable wind resources, the project was designed to lower operating costs, reduce dependence on imported fuel, and strengthen the long-term resilience of the power system. These improvements represent an important step toward the community’s long-term energy vision of expanding renewable generation, incorporating energy storage, and eventually achieving “diesels-off” operation, where essential Tribal loads are powered primarily by local renewable resources.

17 WIND ENERGY↗
DOE OSTI2025

Techno-economic and life cycle analysis of bio-hydrogen production using bio-based waste streams through the integration of dark fermentation and microbial electrolysis

Hydrogen derived from bio-based sources, or biohydrogen (bioH 2 ), has the potential to reduce GHG emissions from industrial and transportation sectors, owing to the low carbon footprint and myriad applications like refinery operation, ammonia production, steel production, fuel cell, etc. To evaluate the commercialization potential of bioH 2 production, we modeled bioH 2 production and conducted techno-economic analysis (TEA) and life cycle analysis (LCA) of two facilities producing 50 metric tonnes of bioH 2 per day from cheese whey (CW) and solid food waste (SFW) through the integration of dark fermentation (DF) and microbial electrolysis cell (MEC) technologies. LCA results showed that CW and SFW can produce carbon-negative bioH 2 , with emissions of −8.6 and −8.0 kg GHG kg −1 bioH 2 with carbon sequestration and renewable electricity resources, respectively, making bioH 2 potentially eligible for a tax credit of $\$3$ kg −1 H 2 based on provision 45 V of the U.S. Inflation Reduction Act (IRA). In this study, bioH 2 production treats waste streams to generate fresh water, thus, potentially can receive waste water treatment fee that varies with regions. The MEC capital cost dominates the bioH 2 cost, which is mainly determined by current density. With a current density of 20 A m −2 , the production cost for CW input varied between $\$17$ and $\$24$ kg −1 bioH 2 , while that for SFW input ranged from $\$29$ to $\$30$ kg −1 bioH 2 under different operating conditions, considering the 45 V tax credit, waste water treatment fee and production revenue. If the current density increases to 100 A m −2 , the bioH 2 cost decreases to a range of $\$4.0$–$\$6.9$ for CW and $\$5$–$\$6$ for SFW scenarios. This study also shows that low-cost bioH 2 can be produced using CW waste stream as feedstock.

Ganguly, Arna [Argonne National Laboratory (ANL), ↗
DOE OSTI2024

Exploring CO 2 reduction and crossover in membrane electrode assemblies

Electrochemical CO 2 reduction (CO 2 R) using renewable electricity is a key pathway toward synthesizing fuels and chemicals. In this study, multi-physics modeling is used to interpret experimental data obtained for CO 2 R to CO using Ag catalysts in a membrane electrode assembly. The one-dimensional model is validated using measured CO 2 crossover and product formation rates. The kinetics of CO formation are described by Marcus–Hush–Chidsey kinetics, which enables accurate prediction of the experimental data by accounting for the reorganization of the solvent during CO 2 R. Further, the results show how the performance is dictated by competing phenomena including ion formation and transport, CO 2 solubility, and water management. The model shows that increasing the ion-exchange capacity of the membrane and surface area of the catalyst increases CO formation rates by >100 mA cm –2 without negatively impacting CO 2 utilization. Here we provide insights into how to manage the trade-off between productivity and CO 2 utilization in CO 2 electrolyzers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Analysis of bipolar membranes for electrochemical CO 2 capture from air and oceanwater

Carbon dioxide (CO 2 ) must be removed from the atmosphere to mitigate the negative effects of climate change. However, the most scalable methods for removing CO 2 from the air require heat from fossil-fuel combustion to produce pure CO 2 and continuously regenerate the sorbent. Bipolar-membrane electrodialysis (BPM-ED) is a promising technology that uses renewable electricity to dissociate water into acid and base to regenerate bicarbonate-based CO 2 capture solutions, such as those used in chemical loops of direct-air-capture (DAC) processes, and in direct-ocean capture (DOC) to promote atmospheric CO 2 drawdown via decarbonization of the shallow ocean. In this study, we develop an experimentally validated 1D model for the electrochemical regeneration of CO 2 from bicarbonate-based carbon capture solutions and seawater using BPM-ED. For DAC, our experimental and computational results demonstrate that pH swings induced by BPM water dissociation drive the formation of CO 2 at the cation-exchange layer|catholyte interface with energy-intensities of less than 150 kJ mol -1 . However, high rates of bubble formation increase energy intensity at current densities >100 mA cm -2 . Correspondingly, accelerating water dissociation catalysis and enacting bubble removal could enable CO 2 recovery at energy intensities <100 kJ mol -1 and current densities >100 mA cm -2 . For DOC, mass transport limitations associated with low carbon concentrations in oceanwater suggest that DOC is best suited for clean production of acid and base usable in downstream processes. Further, these results provide design principles for industrial-scale CO 2 recovery using BPM-ED.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Modeling of H2 Dispersion at ARIES

Hydrogen is a versatile and clean energy carrier that can be produced from various renewable sources such as wind, solar, and hydropower and help decarbonize electricity grids, industry, and transportation. Using the Hydrogen Research Facility under Advanced Research on Integrated Energy Systems (ARIES) at the National Renewable Energy Laboratory's (NREL) Flatirons campus as a test bench, the study examines the feasibility, useability, and value of using computational fluid dynamics (CFD) techniques to model hydrogen dispersion. The ARIES facility was chosen because controlled hydrogen releases can be performed at a rate of 27 kg-H2/hr. Site-specific atmospheric and weather condition data such as wind speed and temperature were used as inputs to the model. The results show statistical distributions and ranges of hydrogen concentrations at locations throughout the domain. Wind conditions are found to significantly impact the release behavior, including the hydrogen cloud's direction and concentrations. At low wind speeds (below 1 mph), hydrogen forms a cloud and at higher wind speeds (> 2-4 mph) hydrogen plume stretches in the direction of wind momentum. From >100 simulations for ARIES site-specific conditions, statistical quantities combined with a clustering algorithm were used to propose sensor location at various elevations from ground.

dispersion↗
DOE OSTI2025

Land of Opportunity: Potential for Renewable Energy on Federal Lands

Renewable energy (RE) in the United States has historically been deployed primarily on private lands, but the growing interest in RE development, generally across the country and specifically on federal lands, raises questions about the potential for RE on public lands. This study seeks to estimate RE technical potential on federal lands and project the amount of RE to be developed on federal lands under decarbonization scenarios for the contiguous United States. The study applied a combination of high-resolution geospatial analysis and power sector modeling and relied on multiple partner federal agencies and land administrators from the Bureau of Land Management, the U.S. Fish and Wildlife Service, the U.S. Forest Service, the U.S. Department of Defense, and the U.S. Department of Energy. In our reference siting access case, we estimate 44 million acres of federal land across the contiguous United States is potentially suitable for UPV development, which corresponds to a capacity technical potential of 5,750 gigawatts (GW) (Figure ES-1). Federal land area available for wind development is similar to UPV but wind’s generating capacity technical potential is lower (875 GW). The technical potential is estimated for two geothermal technologies, hydrothermal and enhanced geothermal systems (EGS), both of which have a smaller amount of federal land available for development (12 and 27 million acres, respectively). However, in terms of capacity, the technical potential for EGS (975 GW) is approximately equal to wind’s technical potential and there is an estimated 130 GW of hydrothermal potential. We also developed cases with more-limited land available for UPV and wind (for federal and non-federal lands) resulting in 96% reduction of wind capacity potential and 70% reduction for UPV. In a case with additional constraints applied to non-federal lands only (Limited Private), the overall (federal and non-federal) technical potential declines but the share of that technical potential on federal lands is higher than in the other siting cases. The technical potential is the maximum amount that could be developed, but only a small fraction would be developed or needed in the future. Across seven scenarios that achieve 100% carbon-free electricity by 2035, we estimate 26 GW to 270 GW of RE capacity could be deployed on federal lands by 2035. The three central scenarios have 51–84 GW of RE deployed by 2035 and requiring about 500,000 to 1,000,000 acres of total land area. Direct land consumption is less than total land use required, thus enabling co-use opportunities. The large technical potential estimates and the increasing deployment projections from the collection of scenarios show the opportunities for RE development on federal lands. Capturing these opportunities-while minimizing conflicts with other land uses, federal department or agency missions, and public interest, and simultaneously maximizing the economic, grid, and social value of the projects-would require collaborative planning among federal land administrators, grid planners, project developers, the public, and other stakeholders.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Mechanistic Insight into Lignin Slow Pyrolysis by Linking Pyrolysis Chemistry and Carbon Material Properties

As a highly abundant renewable carbon source, lignin can be converted to a variety of advanced carbon materials with tailorable properties through slow pyrolysis. In this study, slow pyrolysis of kraft lignin, for the first time, was investigated with a commercial pyrolysis–gas chromatography–mass spectrometry (Py–GC–MS) system through evolved gas analysis-MS (EGA-MS) and heart-cutting-GC–MS (HC-GC–MS) analyses. These analyses allow recovery and examination of the multiphased gas products generated from thermal decomposition of lignin during slow pyrolysis at a controlled heating rate over a long time course, thus making it possible to link operation conditions, pyrolysis chemistry, and carbon material properties. The overall product distributions, including volatiles and solid products, were quantitatively tracked at different heating rates (2, 20, and 40 °C/min) and different temperature regions (100–200, 200–300, and 300–600 °C). Solid residues were further characterized using a suite of analytical tools, in correlation with the investigation of formation mechanisms of volatiles to reveal the reaction chemistry of lignin during slow pyrolysis and to determine the morphology, pore structure, and interfacial chemical properties. This study provides critical insights into the slow pyrolysis chemistry of lignin and the properties of the resulting carbon material. These results will facilitate a better design and control of the lignin slow pyrolysis process for synthesizing functional carbon materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A distinct subpopulation of membrane vesicles in Pseudomonas putida is enriched in enzymes for lignin catabolism

Bacterial membrane vesicles (MVs) mediate diverse microbial processes and are emerging as powerful biomedical tools, but MV population heterogeneity remains an open question. Here, we separate, enumerate, and characterize two MV populations from the soil bacterium Pseudomonas putida during growth with or without lignin-derived carbon, a major carbon source from plant cells in the rhizosphere. Small MVs (MV-S, diameter ~100 nm) were produced from all cultures, whereas large MVs (MV-L, diameter ~300 nm) were observed during the late stationary phase of lignin cultivations. MV-S contained selectively packaged proteins with diverse physiological functions, whereas the MV-L proteome was smaller and largely enriched in outer membrane proteins. Interestingly, enzymes known to mediate the catabolism of lignin-derived aromatic compounds were enriched in MV-S. Overall, this study highlights the need for careful consideration of MV populations in microbial systems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Microstructure Scale Lithium-Ion Battery Modeling: Part II. On In-Plane Heterogeneities and the Mechanisms that Regulate Them

Li-ion batteries performance and degradation are typically modeled at the macroscopic scale, that is neglecting in-plane heterogeneities that can arise from non-uniform electrode microstructures. Herein, a microstructure scale electrochemical model is used to quantify the impact of microstructure heterogeneity on cell performance during fast charging. The model predicts the electrolyte and solid concentration in-plane standard deviation can reach, respectively, ≈200 mol·m −3 and 6–7 kmol·m −3 locally. Further, the intercalation current density in-plane relative standard deviation can reach extremely high values, around 100% in the cathode and well above 100% in the anode graphite. These denote highly non-uniform lithiation rates and material utilization within each slice of the microstructure along the cell thickness. Non-uniform curvatures, at the particle scale (surface roughness) and between particles (size distribution), were found to initiate these in-plane heterogeneities, while an OCP-induced mechanism subsequently regulates them. The present model provides new insights into small length scale heterogeneity impact on battery performance not available with standard macro-scale/P2D modeling.

25 ENERGY STORAGE↗
DOE OSTI2023

Overcoming the Technical Challenges of Coordinating Distributed Load Resources at Scale (Final Report)

Significant recent research has investigated the potential for loads to provide balancing services to the grid. However, this research has not addressed key issues that may arise when such schemes are applied at scale including: 1. Distribution Network Issues. Coordination of large numbers of loads could result in power flows that violate distribution network constraints; 2. Stability Issues. Certain strategies to control loads can exhibit nonlinearity in the form of period-adding bifurcations and chaos. Other control strategies can potentially synchronize the behavior of large numbers of loads. In both cases, the outcome can be power oscillations and instability; 3. Communication Network Issues. Bidirectional low-latency communication channels between a central controller (or several distributed controllers) and each resource are expensive and likely not necessary for effective coordination. Our research questions were: What network, stability, and communication issues might arise in practice when we coordinate large aggregations of loads? How can we coordinate loads to achieve performance objectives in a cost effective manner while avoiding these issues? The ultimate technical goal of the project was the development of network-aware, communication-constrained, non-disruptive load control strategies with stability guarantees that achieve the performance requirements of typical balancing services at a sufficiently low cost to enable the load aggregator and customer to profit. The overall goal was to establish credibility for load control at scale and contribute to U.S. energy security and environmental goals. The team succeeded in answering these research questions and developing these control strategies. The overall approach was based on the development of three testing environments: a simulation testbed, an experimental testbed (20 physical model houses with window-box air conditioners) coupled with the simulation testbed, and a field testbed (100 actual homes in Austin, TX) coupled with the simulation testbed, which enabled controller testing, identification of issues, controller development, and controller validation. The resulting controller was used to demonstrate fast timescale grid balancing (frequency regulation) by aggregations of physical and virtual air conditioners, with sufficient quality to participate in the electricity market. Cost benefit analysis showed overall benefits to the participating households, load aggregators, and the grid, especially if the control technology was integrated directly into existing programmable communicating thermostats. The project provides a variety of wider benefits. Our technology transfer and outreach activities lead us to choose an open-source licensing commercialization pathway, enabling the project results to be available to researchers, industry, and the public. Furthermore, new grid balancing technologies will increase grid flexibility and will enable higher penetrations of intermittent renewable energy resources, such as wind and solar, to be connected to the grid, reducing its environmental impact, and mitigating climate change to the benefit of society.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Field Evaluation of the High Efficiency Dehumidification System (HEDS) at the Timken Museum of Art - Measurement and Verification (M&V) Results from Summer, Winter and Spring Evaluation Periods

The High Efficiency Dehumidification System (HEDS) technology from Conservant Systems Inc., installed at the Timken Museum of Art in San Diego, California, was evaluated to determine its performance relative to appropriate baseline operation. Data was collected for measurement and verification for several weeks during three evaluation periods: Summer (Aug-Sep 2023), Winter (Dec 2023-Feb 2024) and Spring (May-Jun 2024). The evaluation included operating the heating, ventilation and air conditioning (HVAC) system in both constant air volume (CAV) and variable air volume (VAV) modes, with and without the HEDS energy recovery and HVAC system optimization technology enabled. The electricity consumption of the chiller and the gas-supplied reheat energy were measured to characterize savings achieved by the HEDS operation. Based on these measurements, the HEDS was responsible for chiller electrical load savings during the summer evaluation period of 39% and 42% for the CAV and VAV operating modes, respectively; 97% and 100% chiller electrical load reductions were observed during the winter evaluation for the CAV and VAV operating modes, respectively; and the corresponding reductions during the spring evaluation were 42% and 52% for CAV and VAV operation, respectively. The measured reheat energy reductions, which are typically provided by natural gas, due to the HEDS during summer were 64% and 97% in CAV and VAV operating modes, respectively, while the corresponding values were 99% and 78% during the winter evaluation, and 59% and 56% during the spring evaluation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Getting to 100%: Six Strategies for the Challenging Last 10%

This presentation summarizes the challenge of decarbonizing the last 10%" of the power system and discusses six strategies for addressing that challenge. This presentation was given at the IRA, BIL, and the Future of Energy: A Summit to Support State Implementation" workshop in Washington, D.C., in April 2024.

carbon capture↗
DOE OSTI2025

Magnetic Properties and Large Second-Harmonic Generation Response of a Chiral Ternary Chalcogenide: Eu 2 SiSe 4

Eu(II)-containing chalcogenides are an emerging class of materials that are of great interest due to their high optical activity and intriguing magnetism. Here, we synthesized Eu 2 SiSe 4 as red-colored single crystals and characterized its structure with single-crystal X-ray diffraction, confirming the reported chiral monoclinic P2 1 symmetry at room temperature. The crystal structure of Eu 2 SiSe 4 comprises distorted SiSe 4 tetrahedral units and charge-balancing Eu(II) cations. Here, we develop a two-step solid-state synthesis method for Eu 2 SiSe 4 and compare it to the known boron chalcogenide method. We find the second-harmonic generation (SHG) activity of polycrystalline Eu 2 SiSe 4 to be ∼7 × AgGaS 2 , placing it among the highest-known SHG-active chalcogenides. No symmetry lowering is observed down to 100 K in single-crystal X-ray diffraction, although an anomalous expansion in the b-axis lattice parameter occurs and may be correlated to lattice modes of the SiSe 4 tetrahedra. We investigate the physical properties of Eu 2 SiSe 4 using magnetometry and heat capacity measurements and find a transition to an antiferromagnetic ground state at T N ≈ 5.5 K. The low-temperature transition releases less entropy than expected, which may be due to the complex crystal electric field effects of Eu(II).

36 MATERIALS SCIENCE↗
DOE OSTI2021

Photostability of Ambient-Processed, Conjugated Polymer Electrochromic Devices Encapsulated by Bioderived Barrier Films

Polymer-based electrochromic devices (ECDs) are a promising technology for enabling low-voltage, disposable displays, yet are currently limited by photo-oxidative bleaching of the active materials. Here, renewable barrier films composed of cellulose and chitin are presented as an alternative to poly(ethylene terephthalate) (PET) for encapsulating ECDs. To assess barrier film effectiveness, lateral ECDs composed of poly(3,4-propylenedioxythiophene-(CH 2 OEtHx) 2 ) (P(ProDOT)) active layers were constructed and encapsulated with a multilayer barrier consisting of chitin nanofibers and cellulose nanocrystals spray cast onto a cellulose acetate substrate (oxygen transmission rate (OTR) = 29 cm 3 m –2 day –1 ), a commercially available PET film (OTR = 8.5 cm 3 m –2 day –1 ), and a high-performance PET-Al 2 O 3 multilayer barrier film (OTR < 1 cm 3 m –2 day –1 ). The photodegradation of the P(ProDOT) active layer was determined by measuring the evolution of the colorimetric contrast (ΔE*) and switching speeds as a function of light exposure (100 mW cm –2 , AM 1.5 G light). Photodegradation was found to proceed at a similar rate for all encapsulated devices (roughly 10 times more slowly than unencapsulated devices), highlighting the opportunity for replacing petroleum packaging with bioderived barrier films. Analysis of the switching kinetics, the shifts in optical absorbance, and evidence of chemical degradation indicate that both photochemical breakdown of the electrolyte and cross-linking of the P(ProDOT) active material are key drivers for loss of device performance when oxygen flux to the active material is limited. Furthermore, pathways toward better understanding photodegradation are then proposed with sustainability in mind for future ECD design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Partial-Single-Atom, Partial-Nanoparticle Composites Enhance Water Dissociation for Hydrogen Evolution

The development of an efficient electrocatalyst toward the hydrogen evolution reaction (HER) is of significant importance in transforming renewable electricity to pure and clean hydrogen by water splitting. However, the construction of an active electrocatalyst with multiple sites that can promote the dissociation of water molecules still remains a great challenge. Herein, a partial-single-atom, partial-nanoparticle composite consisting of nanosized ruthenium (Ru) nanoparticles (NPs) and individual Ru atoms as an energy-efficient HER catalyst in alkaline medium is reported. The formation of this unique composite mainly results from the dispersion of Ru NPs to small-size NPs and single atoms (SAs) on the Fe/N codoped carbon (Fe–N–C) substrate due to the thermodynamic stability. The optimal catalyst exhibits an outstanding HER activity with an ultralow overpotential (9 mV) at 10 mA cm -2 (η 10 ), a high turnover frequency (8.9 H 2 s -1 at 50 mV overpotential), and nearly 100% Faraday efficiency, outperforming the state-of-the-art commercial Pt/C and other reported HER electrocatalysts in alkaline condition. Both experimental and theoretical calculations reveal that the coexistence of Ru NPs and SAs can improve the hydride coupling and water dissociation kinetics, thus synergistically enhancing alkaline hydrogen evolution performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Influence of Linker Group on Bipolar Redox-Active Molecule Performance in Non-Aqueous Redox Flow Batteries

Redox flow batteries (RFBs) are an attractive choice for stationary energy storage of renewables such as solar and wind. Non-aqueous redox flow batteries (NARFBs) have garnered broad interest due to their high voltage operation compared to their aqueous counterparts. Further, the utilization of bipolar redox-active molecules (BRMs) is a practical way to alleviate crossover faced by asymmetric RFBs. In this work, ferrocene (Fc) and phthalimide (PI) are covalently linked with various tethering groups which vary in structure and length. The compiled results suggest that the length and steric shielding ability of the linker group can greatly influence the stability and overall performance of Fc-n-PI BRM-based NARFBs. Primary sources of capacity loss are found to be BRM degradation for straight chain spacers <6 carbons and membrane (Nafion) fouling. Fc-hexyl-PI provided the most stable battery cycling and coulombic efficiencies of >98 % over 100 cycles (~13 days). NARFB using Fc-hexyl-PI as an active material exhibited high working voltage (1.93 V) and maximum capacity (1.28 Ah L -1 ). Additionally, this work highlights rational strategies to improve cycling stability and optimize NARFB performance.

25 ENERGY STORAGE↗
DOE OSTI2025

Assessing electrification readiness in U.S. single-family homes based on a nationwide survey of electrical panel capacities

Electrification of residential buildings is a key strategy for increasing the use of renewable energy sources. Central to this transition is understanding the capacity of existing electrical infrastructure—specifically electrical panels—to safely and effectively manage increased electricity demands from electrification technologies. However, comprehensive nationwide data on electrical panel capacities in U.S. single-family homes is currently lacking. To address this gap, we conducted a nationwide survey of single-family homes, collecting detailed data on electrical panel capacities, breaker slot availability, major electric and gas appliances, electrical panel models, and home characteristics such as construction year and floor area. Photographic documentation was used to verify electrical panel data and appliance information. Results show that approximately 60% of surveyed homes have electrical panels rated at ≥200 amperes (A), indicating that a significant portion of the existing housing stock can accommodate additional electric loads. However, 31% of homes possess panels rated at ≤100 A, potentially restricting their ability to adopt new electric appliances without significant upgrades. Panel capacities positively correlate with both home size and construction year, with newer and larger homes generally better suited for electrification. Homes with higher-capacity panels tend to have fewer gas appliances, reflecting a gradual shift toward electric technologies. Conversely, homes with lower-capacity panels frequently rely on multiple gas appliances, highlighting substantial electrification challenges. Additionally, approximately 3% of surveyed homes had potentially hazardous electrical panel models, emphasizing important safety considerations in the residential electrification process. Our findings underscore the need for targeted policies, financial incentives, and infrastructure investments designed specifically to address infrastructural and safety barriers, particularly in older and smaller homes, to support equitable and efficient electrification across the U.S. residential sector.

Gul, Sadia↗