Search NASA⌕ Search

SEARCH · Search NASA

Results for “AFM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Photothermally excited force modulation microscopy for broadband nanomechanical property measurements

We demonstrate photothermally excited force modulation microscopy (PTE FMM) for mechanical property characterization across a broad frequency range with an atomic force microscope (AFM). Photothermal excitation allows for an AFM cantilever driving force that varies smoothly as a function of drive frequency, thus avoiding the problem of spurious resonant vibrations that hinder piezoelectric excitation schemes. A complication of PTE FMM is that the sub-resonance cantilever vibration shape is fundamentally different compared to piezoelectric excitation. By directly measuring the vibrational shape of the cantilever, we show that PTE FMM is an accurate nanomechanical characterization method. PTE FMM is a pathway towards the characterization of frequency sensitive specimens such as polymers and biomaterials with frequency range limited only by the resonance frequency of the cantilever and the low frequency limit of the AFM.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterizing nanoscale scanning probes using electron microscopy: A novel fixture and a practical guide

The nanoscale geometry of probe tips used for atomic force microscopy (AFM) measurements determines the lateral resolution, contributes to the strength of the tip-surface interaction, and can be a significant source of uncertainty in the quantitative analysis of results. While inverse imaging of the probe tip has been used successfully to determine probe tip geometry, direct observation of the tip profile using electron microscopy (EM) confers several advantages: it provides direct (rather than indirect) imaging, requires fewer algorithmic parameters, and does not require bringing the tip into contact with a sample. In the past, EM-based observation of the probe tip has been achieved using ad hoc mounting methods that are constrained by low throughput, the risk of contamination, and repeatability issues. We report on a probe fixture designed for use in a commercial transmission electron microscope that enables repeatable mounting of multiple AFM probes as well as a reference grid for beam alignment. This communication describes the design, fabrication, and advantages of this probe fixture, including full technical drawings for machining. Further, best practices are discussed for repeatable, non-destructive probe imaging. Finally, examples of the fixture’s use are described, including characterization of common commercial AFM probes in their out-of-the-box condition.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of the electrostatic surface potential on the oligomerization of full-length human recombinant prion protein at single-molecule level

The electrostatic surface potential (ESP) of prion oligomers has critical influences on the aggregating processes of the prion molecules. The atomic force microscopy (AFM) and structural simulation were combined to investigate the molecular basis of the full-length human recombinant prion oligomerization on mica surfaces. The high resolution non-intrusive AFM images showed that the prion oligomers formed different patterns on mica surfaces at different buffer pH values. The basic binding units for the large oligomers were determined to be prion momoners (Ms), dimers (Ds), and trimers (Ts). The forming of the D and T units happened through the binding of hydrophobic β-sheets of the M units. In contrast, the α-helices of these M, D, and T units were the binding areas for the formation of large oligomers. At pH 4.5, the binding units M, D, and T showed clear polarized ESP distributions on the surface domains, while at pH 7.0, they showed more evenly distributed ESPs. Based on the conformations of oligomers observed from AFM images, the D and T units were more abundantly on mica surface at pH 4.5 because the ESP re-distribution of M units helped to stabilize these larger oligomers. The amino acid side chains involved in the binding interfaces were stabilized by hydrogen bonds and electrostatic interactions. The detailed analysis of the charged side chains at pH 4.5 indicated that the polarized ESPs induced the aggregations among M, D, and T to form larger oligomers. Therefore, the hydrogen bonds and electrostatic interactions worked together to form the stabilized prion oligomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolution of nano-rheological properties of Nafion{sup ®} thin films during pH modification by strong base treatment: A static and dynamic force spectroscopy study

Addition of a strong base to Nafion{sup ®} proton exchange membranes is a common practice in industry to increase their overall performance in fuel cells. Here, we investigate the evolution of the nano-rheological properties of Nafion thin films as a function of the casting pH, via characterization with static and dynamic, contact and intermittent-contact atomic force microscopy (AFM) techniques. The addition of KOH causes non-monotonic changes in the viscoelastic properties of the films, which behave as highly dissipative, softer materials near neutral pH values, and as harder, more elastic materials at extreme pH values. We quantify this behavior through calculation of the temporal evolution of the compliance and the glassy compliance under static AFM measurements. We complement these observations with dynamic AFM metrics, including dissipated power and virial (for intermittent-contact-mode measurements), and contact resonance frequency and quality factor (for dynamic contact-mode measurements). We explain the non-monotonic material property behavior in terms of the degree of ionic crosslinking and moisture content of the films, which vary with the addition of KOH. This work focuses on the special case study of the addition of strong bases, but the observed mechanical property changes are broadly related to water plasticizing effects and ionic crosslinking, which are also important in other types of films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wide range local resistance imaging on fragile materials by conducting probe atomic force microscopy in intermittent contact mode

An imaging technique associating a slowly intermittent contact mode of atomic force microscopy (AFM) with a home-made multi-purpose resistance sensing device is presented. It aims at extending the widespread resistance measurements classically operated in contact mode AFM to broaden their application fields to soft materials (molecular electronics, biology) and fragile or weakly anchored nano-objects, for which nanoscale electrical characterization is highly demanded and often proves to be a challenging task in contact mode. Compared with the state of the art concerning less aggressive solutions for AFM electrical imaging, our technique brings a significantly wider range of resistance measurement (over 10 decades) without any manual switching, which is a major advantage for the characterization of materials with large on-sample resistance variations. After describing the basics of the set-up, we report on preliminary investigations focused on academic samples of self-assembled monolayers with various thicknesses as a demonstrator of the imaging capabilities of our instrument, from qualitative and semi-quantitative viewpoints. Then two application examples are presented, regarding an organic photovoltaic thin film and an array of individual vertical carbon nanotubes. Both attest the relevance of the technique for the control and optimization of technological processes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High field X-ray diffraction measurements of Mn{sub 2}Sb{sub 0.95}Ge{sub 0.05}

Magnetization and high-field X-ray powder diffraction measurements were performed for Mn{sub 2}Sb{sub 0.95}Ge{sub 0.05} with a tetragonal structure in magnetic fields up to 5 T in the 10-300 K temperature range. For B = 0 T and 5 T, a first-order magnetic transition from a ferrimagnetic (FRI) to an antiferromagnetic (AFM) state occurred at T{sub t} ∼ 180 K and 150 K, respectively, and were accompanied by an iso-structural transformation. For this transition from the AFM to FRI state, the lattice parameters a and c changed by |Δa/a| = 0.15% and by |Δc/c| = 0.47% at 180 K. The compound showed both metamagnetic transition from the AFM to FRI state with a hysteresis at the temperature just below T{sub t} and magnetic field-induced iso-structural transformation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Micromagnetic simulation of THz signals in antiferromagnetic FeRh by sub-picosecond thermal pulses

The generation of electrical field signals in the terahertz frequency (THz) range has gained increasing attention in recent years. The use of antiferromagnets (AFM) has been proposed as a possible alternative to generate high frequency signals using spin transfer torque (STT) induced damping compensation. In this work, we simulated a potential mechanism for laser-induced THz signals in the AFM phase of FeRh/Pt bilayer films using micromagnetic model. The FeRh film is modeled as two Fe-sublattices coupled via intra-lattice exchange field, and subjected to a sub-picosecond thermal pulse. A partial canting between the magnetizations of two Fe-sublattices, is observed within the first picosecond after the excitation. This short lived state relaxes abruptly into the initial AFM phase, injecting a spin current into the Pt layer via spin pumping, which will eventually be converted into charge current oscillating at THz frequency.

36 MATERIALS SCIENCE↗

Accuracy of tip-sample interaction measurements using dynamic atomic force microscopy techniques: Dependence on oscillation amplitude, interaction strength, and tip-sample distance

Atomic force microscopy (AFM) is a versatile surface characterization method that can map a sample’s topography with high spatial resolution while simultaneously interrogating its surface chemistry through the site-specific high-resolution quantification of the forces acting between the sample and the probe tip. Thanks to considerable advances in AFM measurement technology, such local measurements of chemical properties have gained much popularity in recent years. To this end, dynamic AFM methodologies are implemented where either the oscillation frequency or the oscillation amplitude and phase of the vibrating cantilever are recorded as a function of tip-sample distance and subsequently converted to reflect tip-sample forces or interaction potentials. Such conversion has, however, been shown to produce non-negligible errors when applying the most commonly used mathematical conversion procedures if oscillation amplitudes are of the order of the decay length of the interaction. Extending on these earlier findings, the computational study presented in this paper reveals that the degree of divergence from actual values may also critically depend on both the overall strength of tip-sample interaction and the distance at which the interaction is obtained. These systematic errors can, however, be effectively eliminated by using oscillation amplitudes that are sufficiently larger than the decay length of the interaction potential.

Electrical properties and parameters↗

Nanoscale control of LaAlO 3 /SrTiO 3 metal–insulator transition using ultra-low-voltage electron-beam lithography

In this work, we describe a method to control the insulator–metal transition at the LaAlO 3 /SrTiO 3 interface using ultra-low-voltage electron beam lithography. Compared to previous reports that utilize conductive atomic force microscope (c-AFM) lithography, this approach can provide comparable resolution (~10 nm) at write speeds (10 mm/s) that are up to 10 000× faster than c-AFM. The writing technique is nondestructive, and the conductive state is reversible via prolonged exposure to air. Transport properties of representative devices are measured at milli-Kelvin temperatures, where superconducting behavior is observed. We also demonstrate the ability to create conducting devices on graphene/LaAlO 3 /SrTiO 3 heterostructures. The underlying mechanism is believed to be closely related to the same mechanism regulating c-AFM-based methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High resolution atomic force microscopy with an active piezoelectric microcantilever

Active microcantilevers with on-chip sensing and actuation provide significant advantages in tapping mode Atomic Force Microscopy (AFM). Collocated transduction allows for effective manipulation of cantilever dynamics through feedback control, enabling higher scan rates. However, the adjacency of the sensing and actuation electrodes is known to result in a high level of feedthrough, leading to a low imaging resolution. Readout circuit noise further deteriorates the imaging precision. Here, we investigate the noise sources that affect AFM microcantilevers with collocated aluminum nitride (AlN) actuator–sensor pairs. We reported these cantilevers in earlier work and demonstrated that they display a very low level of feedthrough between the actuation and sensing electrodes. We present a high signal-to-noise ratio (SNR) sensing method that enables us to demonstrate high-resolution AFM on a calibration grating with nm-step silicon carbide (SiC) terraces. In conclusion, measuring the Lorentzian response of the cantilever’s Brownian motion with the on-chip active sensor at resonance enables us to calibrate the dynamic stiffness at the first fundamental resonance mode, without utilizing an optical sensor.

47 OTHER INSTRUMENTATION↗

Interplay of ferromagnetic and antiferromagnetic interactions in epitaxial Co 3 ZnN

Antiperovskite nitrides with the general formula M 3 AN have attracted significant attention due to their tunable electronic and magnetic properties. Among them are many cobalt-based compounds predicted to exhibit high thermodynamic stability and intriguing magnetic behavior. Here, we report the synthesis and magnetic characterization of epitaxial Co3ZnN thin films grown by radio frequency sputtering on SrTiO 3 (STO) and MgO substrates. X-ray diffraction confirms phase-pure (00l)-oriented films with cube-on-cube epitaxy on STO, with a c-lattice parameter of 3.752 Å. Magnetic measurements reveal clear hysteresis at 2 K with a coercive field of ∼0.11 T and a small net moment of 0.108 μ B /f.u., suggesting either a canted antiferromagnetic (AFM) or ferrimagnetic (FiM) configuration. Temperature-dependent magnetization measurements show a transition near 25 K, with strong AFM interactions with Curie–Weiss temperature (Θ) = −80.13 K. Complementary density functional theory and Monte Carlo simulations indicate a ferromagnetic (FM) ground state, with the FM–AFM energy difference decreasing systematically with increasing supercell size, consistent with competition between FM and AFM/FiM interactions. These results highlight Co3ZnN as a magnetically complex antiperovskite nitride with competing exchange interactions.

36 MATERIALS SCIENCE↗

Pseudogap in electron-doped cuprates: Strong correlation leading to band splitting

The pseudogap phenomena have been a long-standing mystery of the cuprate high-temperature superconductors. The pseudogap in the electron-doped cuprates has been attributed to band folding due to antiferromagnetic (AFM) long-range order or short-range correlation. We performed an angle-resolved photoemission spectroscopy study of the electron-doped cuprates Pr 1.3−x La 0.7 Ce x CuO 4 showing spin-glass, disordered AFM behaviors, and superconductivity at low temperatures and, by measurements with fine momentum cuts, found that the gap opens on the unfolded Fermi surface rather than the AFM Brillouin zone boundary. The gap did not show a node, following the full symmetry of the Brillouin zone, and its magnitude decreased from the zone-diagonal to (π,0) directions, opposite to the hole-doped case. These observations were reproduced by cluster dynamical-mean-field-theory calculation, which took into account electron correlation precisely within a (CuO 2 ) 4 cluster. In conclusion, the present experimental and theoretical results are consistent with the mechanism that electron or hole doping into a Mott insulator creates an in-gap band that is separated from the upper or lower Hubbard band by the pseudogap.

74 ATOMIC AND MOLECULAR PHYSICS↗

Emergent ferromagnetism and unusual irreversible magnetoresistance in an intercalated van der Waals antiferromagnet

Orthorhombic air-stable two-dimensional (2D) antiferromagnet (AFM) CrSBr has attracted much research interest lately thanks to its rich magnetic behaviors together with its remarkable electronic, excitonic, and polaritonic properties. Here, we report a reliable electrochemical intercalation method by inserting large tetrabutylammonium (TBA + ) ions into CrSBr layers. Magnetically, such intercalation efficiently suppresses the interlayer AFM and induces a ferromagnetic (FM) order with a much-enhanced transition temperature up to 200 K, nearly 70 K higher than the AFM onset of 132 K in pristine CrSBr. Electronically, the TBA + intercalation not only increases the electric conductivity of CrSBr, which is further enhanced by magnetic fields, but also introduces a giant negative irreversible magnetoresistance. This work demonstrates the tunable magnetic and electronic properties of CrSBr as well as their interplay, paving the way for advanced spintronic and magnetic memory devices.

36 MATERIALS SCIENCE↗

Growth and characterization of homoepitaxial β-Ga 2 O 3 layers

ß-Ga 2 O 3 is a next-generation ultra-wide bandgap semiconductor (E g = 4.8 eV to 4.9 eV) that can be homoepitaxially grown on commercial substrates, enabling next-generation power electronic devices among other important applications. Analyzing the quality of deposited homoepitaxial layers used in such devices is challenging, in part due to the large probing depth in traditional x-ray diffraction (XRD) and also due to the surface-sensitive nature of atomic force microscopy (AFM). Here, a combination of evanescent grazing-incidence skew asymmetric XRD and AFM are investigated as an approach to effectively characterize the quality of homoepitaxial ß-Ga 2 O 3 layers grown by molecular beam epitaxy at a variety of Ga/O flux ratios. Accounting for both structure and morphology, optimal films are achieved at a Ga/O ratio of ~1.15, a conclusion that would not be possible to achieve by either XRD or AFM methods alone. Finally, fabricated Schottky barrier diodes with thicker homoepitaxial layers are characterized by J-V and C-V measurements, revealing an unintentional doping density of 4.3×10 16 cm -3 - 2×10 17 cm -3 in the epilayer. These results demonstrate the importance of complementary measurement methods for improving the quality of the ß-Ga 2 O 3 homoepitaxial layers used in power electronic and other devices.

36 MATERIALS SCIENCE↗

Studies on magnetocaloric effect of Tb 2 Ni 0.90 Si 2.94 compound

A comparative study has been carried out on the magnetocaloric properties of as-cast and annealed Tb 2 Ni 0.90 Si 2.94 intermetallic compound. While the as-cast material exhibits ferromagnetic cluster-glass behaviour below 9.9 K coexisting with antiferromagnetic (AFM) interaction, the annealed system shows AFM ordering below 13.5 K and spin freezing occurs below 4 K. The compound exhibits moderate magnetocaloric performance with maximum isothermal entropy changes (–ΔS M ) 8.8 and 10.9 J kg –1 K –1 , relative cooling power (RCP) 306 and 365 J kg –1 , along with adiabatic temperature change (ΔT ad ) 5.5 and 8.15 K for 70 kOe magnetic field change in as-cast and annealed forms, respectively. The estimated magnetic entropy change is found to be larger for annealed sample in comparison to that of as-cast analogue. However, the full width at half maxima (FWHM) of –ΔS M (T) behaviour is larger in as-cast compound due to the presence of inherent structural disorder which reduces with thermal annealing. A positive isothermal entropy change (–ΔS M ) and adiabatic temperature change (ΔT ad ) is observed for the as-cast compound in the measured field and temperature region. In contrast, the annealed system exhibits inverse magnetocaloric effect in the low field and temperature region where AFM interactions dominate. Magnetocaloric effect (MCE) is used as a tool to establish a subtle correlation between the observed magnetocaloric effect and the reported magnetic properties of the system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical fingerprints of the electronic band reconstruction in van der Waals magnetic materials

We report a broadband study of the charge dynamics in the van der Waals magnetic materials 2H-M x TaS 2 (M = Mn and Co), which span the onset of both long-range antiferromagnetic (AFM) and ferromagnetic (FM) order, depending on the intercalation M and its concentration x. We discover a spectral weight (SW) shift from high to low energy scales for FM compositions, while reversely SW is removed from low towards high spectral energies for AFM compounds. This maps the related reconstruction of the electronic band structure along the crossover from the FM to AFM order, which restores an occupation balance in the density of states between spin majority and minority bands of the intercalated 3d elements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DFT Study on Metamagnetics β-M (OH) 2 ( M = Mn, Fe, Co, Ni)

First-principles calculations have been carried out in order to analyze the structural, vibrational, and magnetic properties in the A -type antiferromagnetic (AFM) - M(OH) 2 metal transition hydroxides. Theoretical results demonstrate a quasi layer-by-layer magnetic behavior with strong ferromagnetic (FM) interactions in the intralayer plane and weak AFM behavior between the interlayer. This behavior corresponds to an A -type AFM behavior for - M (OH) 2 ( M = Mn, Fe, Co, and Ni) with energy differences around 3.0 meV with respect to the FM state. Structural analysis reveal a clear influence of Van der Waals (VdW) interactions in the stabilization of the phase giving high accuracy in lattice parameter when compared to experimental findings. Qualitative analysis of the magnetic exchange interactions reveals a higher exchange intralayer interaction for M = Ni, and higher exchange or dipolar interlayer interactions for M = Mn. Vibrational analysis, in the M = Ni case, demonstrate a correct IR and Raman modes assignments according to experimental results on the P ¯3 m 1 space group.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancement of antiferromagnetic spin fluctuations in UTe2 under pressure revealed by 125 Te NMR

Characterizing magnetic fluctuations is one of the keys to understanding the origin of superconductivity in the spin-triplet superconductor UTe 2 , which exhibits two superconducting (SC) phases (SC1 and SC2) under pressure: SC1 where the superconducting transition temperature of 𝑇c decreases with pressure, whereas 𝑇c of SC2 rises with pressure. Previously, D. Ambika et al. [Phys. Rev. B 105, L220403 (2022)] reported the possible coexistence of ferromagnetic (FM) and antiferromagnetic (AFM) spin fluctuations in UTe2 under pressure from their nuclear magnetic resonance (NMR) measurements. To delve into the relationship between the magnetic fluctuations and the two SC phases, we have carried out detailed 125 Te NMR measurements on a single crystal of UTe2 with 𝑇c=1.6K at various pressures ranging from 0 to 2.05 GPa. By comparing the temperature 𝑇 dependence of nuclear spin-lattice relaxation rates divided by temperature 1/𝑇1⁢𝑇 with that of the Knight shift 𝐾 for magnetic fields along the 𝑎, 𝑏, and 𝑐 directions, we evidence the enhancement of AFM spin fluctuations with increasing pressure. Based on the results, we suggest that FM spin fluctuations are more favorable for SC1 and AFM spin fluctuations are crucial for SC2. Our work will inspire further study on this material to understand the peculiar SC phases in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗