Search NASA⌕ Search

SEARCH · Search NASA

Results for “CHARACTERISTIC METHOD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

AirSTAR: A UAV Platform for Flight Dynamics and Control System Testing

As part of the NASA Aviation Safety Program at Langley Research Center, a dynamically scaled unmanned aerial vehicle (UAV) and associated ground based control system are being developed to investigate dynamics modeling and control of large transport vehicles in upset conditions. The UAV is a 5.5% (seven foot wingspan), twin turbine, generic transport aircraft with a sophisticated instrumentation and telemetry package. A ground based, real-time control system is located inside an operations vehicle for the research pilot and associated support personnel. The telemetry system supports over 70 channels of data plus video for the downlink and 30 channels for the control uplink. Data rates are in excess of 200 Hz. Dynamic scaling of the UAV, which includes dimensional, weight, inertial, actuation, and control system scaling, is required so that the sub-scale vehicle will realistically simulate the flight characteristics of the full-scale aircraft. This testbed will be utilized to validate modeling methods, flight dynamics characteristics, and control system designs for large transport aircraft, with the end goal being the development of technologies to reduce the fatal accident rate due to loss-of-control.

Jordan, Thomas L.↗
NASA NTRS1928

The relative performance obtained with several methods of control of an overcompressed engine using gasoline

This report presents some results obtained during an investigation to determine the relative characteristics for several methods of control of an overcompressed engine using gasoline and operating under sea-level conditions. For this work, a special single cylinder test engine, 5-inch bore by 7-inch stroke, and designed for ready adjustment of compression ratio, valve timing and valve lift while running, was used. This engine has been fully described in NACA-TR-250. Tests were made at an engine speed of 1,400 R. P. M. for compression ratios ranging from 4.0 to 7.6. The air-fuel ratios were on the rich side of the chemically correct mixture and were approximately those giving maximum power. When using plain domestic gasoline, detonation was controlled to a constant, predetermined amount (audible), such as would be permissible for continuous operation, by (a) throttling the carburetor, (b) maintaining full throttle but greatly retarding the ignition, and (c) varying the timing of the inlet valve to reduce the effective compression ratio. From the results of the tests, it may be concluded that method (b) gives the best all-round performance and, being easily employed in service, appears to be the most practicable method for controlling an overcompressed engine using gasoline at low altitudes.

Gardiner, Arthur W↗
NASA NTRS1983

Improvement of mixed time implicit-explicit algorithms for thermal analysis of structures

Computer implementation aspects and numerical evaluation of the recently introduced mixed time implicit-explicit algorithms in thermal analysis of structures are presented. A computationally useful method of estimating the critical time step for a linear quadrilateral element is given herein for the methods introduced by Liu and co-workers. Numerical tests confirm the stability criterion and accuracy characteristics of the methods. The superiority of these mixed time methods to the fully implicit method or the fully explicit method is also demonstrated.

Liu, W. K.↗
NASA NTRS1998

Development of a Probabilistic Dynamic Synthesis Method for the Analysis of Nondeterministic Structures

Accounting for the statistical geometric and material variability of structures in analysis has been a topic of considerable research for the last 30 years. The determination of quantifiable measures of statistical probability of a desired response variable, such as natural frequency, maximum displacement, or stress, to replace experience-based "safety factors" has been a primary goal of these studies. There are, however, several problems associated with their satisfactory application to realistic structures, such as bladed disks in turbomachinery. These include the accurate definition of the input random variables (rv's), the large size of the finite element models frequently used to simulate these structures, which makes even a single deterministic analysis expensive, and accurate generation of the cumulative distribution function (CDF) necessary to obtain the probability of the desired response variables. The research presented here applies a methodology called probabilistic dynamic synthesis (PDS) to solve these problems. The PDS method uses dynamic characteristics of substructures measured from modal test as the input rv's, rather than "primitive" rv's such as material or geometric uncertainties. These dynamic characteristics, which are the free-free eigenvalues, eigenvectors, and residual flexibility (RF), are readily measured and for many substructures, a reasonable sample set of these measurements can be obtained. The statistics for these rv's accurately account for the entire random character of the substructure. Using the RF method of component mode synthesis, these dynamic characteristics are used to generate reduced-size sample models of the substructures, which are then coupled to form system models. These sample models are used to obtain the CDF of the response variable by either applying Monte Carlo simulation or by generating data points for use in the response surface reliability method, which can perform the probabilistic analysis with an order of magnitude less computational effort. Both free- and forced-response analyses have been performed, and the results indicate that, while there is considerable room for improvement, the method produces usable and more representative solutions for the design of realistic structures with a substantial savings in computer time.

Brown, A. M.↗
DOE OSTI2025

Investigating the role of adipose tissue in mobility and aging: design and methods of the Adipose Tissue ancillary to the Study of Muscle, Mobility, and Aging (SOMMA-AT)

Background Age-related changes in adipose tissue affect chronic medical diseases and mobility disability but mechanism remains poorly understood. The goal of this study is to define methods for phenotyping unique characteristics of adipose tissue from older adults. Methods Older adults enrolled in study of muscle, mobility, and aging selected for the adipose tissue ancillary (SOMMA-AT; N = 210, 52.38% women, 76.12 ± 4.37 years) were assessed for regional adiposity by whole-body magnetic resonance (AMRA) and underwent a needle-aspiration biopsy of abdominal subcutaneous adipose tissue (ASAT). ASAT biopsies were flash frozen, fixed, or processed for downstream applications and deposited at the biorepository. Biopsy yields, qualitative features, adipocyte sizes, and concentration of adipokines secreted in ASAT explant conditioned media were measured. Inter-measure Spearman correlations were determined. Results Regional, but not total, adiposity differed by sex: women had greater ASAT mass (8.20 ± 2.73 kg, p < .001) and biopsy yield (3.44 ± 1.81 g, p < .001) than men (ASAT = 5.95 ± 2.30 kg, biopsy = 2.30 ± 1.40 g). ASAT mass correlated with leptin (r = 0.54, p < .001) and not resistin (p = .248) and adiponectin (p = .353). Adipocyte area correlated with ASAT mass (r = 0.34, p < .001), BMI (r = 0.33, p < .001), adiponectin (r = −0.22, p = .005) and leptin (r = 0.18, p = .024) but not with resistin (p = .490). Conclusion In addition to the detailed ASAT biopsy processing in this report, we found that adipocyte area correlated with ASAT mass, and both measures related to some key adipokines in the explant conditioned media. In conclusion, these results, methods, and biological repositories underscore the potential of this unique cohort to impact the understanding of aging adipose biology on disease, disability, and other aging tissues.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1982

A study of the relativistic rise in ionization as measured by ion chambers of different design

Techniques for scheduling with resource-constraints are investigated. In particular, the use of zero-one programming and dispatching methods are discussed. An algorithm which combines characteristics of both existing methods to generate a valid schedule to experiments is introduced. Examples and test results are presented to illustrate the feasibility of the use of this algorithm on data typical to Spacelab missions.

Shand, J. B., Jr.↗
DOE OSTI2023

Numerical Methods to Evaluate Hyperelastic Transducers: Hexagonal Distributed Embedded Energy Converters

Hexagonal distributed embedded energy converters, also known as hexDEECs, are centimeter-scale energy transducers that leverage variable capacitance to generate electricity when their hyperelastic structure is dynamically deformed. To better understand, characterize, and optimize hexDEEC designs, a series of numerical methods and techniques were developed to model the hyperelastic mechanics of hexDEECs, electrostatic properties, and electricity generation characteristics. The numerical methods developed for the hyperelastic structural analysis were corroborated by empirical results from another study, and the models and equations for capacitance, electrostatic forces, and electrical potential energy were derived from fundamental electrostatic equations. These methods and techniques were implemented within the STAR-CCM+ multiphysics software Version 2020.3 (15.06.008) environment. Results from this analysis revealed methodologies and techniques necessary to model the energy converters, which will enable future exploration and optimization of more specific designs and corresponding applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1986

Supersonic full-potential method applied to missile bodies

The NCOREL full-potential method with an entropy correction is presently applied to supersonic missile flowfield problems. After defining the salient characteristics of the method, a combination of linear theory with NCOREL and experimental data is used to isolate the nonlinear features of the supersonic flow so that the influence of geometry and flow conditions on the development of such flow nonlinearities can be appreciated. Comparisons of experimental longitudinal force and moment data with NCOREL and various linear theory predictions are presented for several generic missile airframe configurations of circular and elliptic cross section. The NCOREL code solves the nonconservative full potential equation in a spherical coordinate system; exact boundary conditions are defined on the missile surface.

Pittman, J. L.↗
NASA NTRS1981

Theoretical and experimental supersonic lateral-directional stability characteristics

A program has been initiated at NASA Langley Research Center to assess several methods for estimation of lateral-directional stability. As a basis for comparison, experimental data are presented for a simple wing-body vertical tail configuration. The methods for estimating the characteristics include a second-order shock expansion and panel method (MISLIFT), a slender body and 'first-order' panel method (APAS), and a 'higher-order' panel method for linearized supersonic flow (PAN AIR). The results show that PAN AIR provides accurate estimates of these characteristics at moderate angles of attack for complete configurations with either single or twin vertical tails. APAS provides estimates for complete configurations at zero angle of attack. However, MISLIFT only provides estimates for the simplest body-vertical tail configurations at zero angle of attack.

Lamb, M.↗
NASA NTRS1994

On the vortical-flow-prediction capability of an unstructured-grid Euler solver

The results from a concentrated computational effort are presented with the primary objective being directed at evaluating the vortical-flow-prediction capability of an unstructured-grid Euler solver. Both viscous and inviscid solutions, obtained from an established structured-grid method, along with experimental wind-tunnel data are used as benchmark measures to assess the validity of the unstructured-grid Euler results. Viscous effects on vortical flows are first identified by comparing the viscous and inviscid solutions obtained from the structured-grid method. Computational data analysis is then presented which reveals excellent correlations between the inviscid structured and unstructured-grid results in terms of off-surface flow structures, surface pressure distribution, and the predicted longitudinal aerodynamic characteristics. The sensitivity of the unstructured-grid inviscid solutions to grid refinement is also discussed along with an analysis of the convergence and performance characteristics for each method.

Unstructured grid↗
NASA NTRS1994

On the Vortical-Flow Prediction Capability of an Unstructured-Grid Euler Solver

The results from a concentrated computational effort are presented with the primary objective being directed at evaluating the vortical-flow-prediction capability of an unstructured-grid Euler solver. Both viscous and inviscid solutions, obtained from an established structured-grid method, along with an experimental wind-tunnel data are used as bench-mark measures to assess the validity of the unstructured-grid Euler results. Viscous effects on vortical flows are first identified by comparing the viscous and inviscid solutions obtained form the structured-grid method. Computational data analysis are then presented which reveal excellent correlations between the inviscid structured and unstructured-grid results in terms of off-surface flow structures, surface pressure distribution and the predicted longitudinal aerodynamic characteristics. The sensitivity of the unstructured-grid inviscid solutions to grid refinement is also discussed along with an analysis of the convergence and performance characteristics for each method.

Unstructured grid↗
DOE OSTI2026

Knowledge-Based Hazardous Waste Determinations for Solar Photovoltaic (PV) Modules: A Foundational Study

This report explores using "generator knowledge" to determine whether a solar photovoltaic (PV) module must be managed as hazardous waste prior to recycling or landfilling. Generator knowledge is a legal term and existing regulatory pathway for making a hazardous waste determination that has been used by other industries but is a relatively unknown option to the PV industry. In the United States, a hazardous waste determination often acts as a pre-requisite to recycle or landfill a PV module. The results of the hazardous waste determination dictate whether the PV module must be managed as hazardous waste or nonhazardous solid waste. Managing a PV module as hazardous waste requires compliance with stringent U.S. federal and state hazardous waste law. In addition to increased management costs, which can be ten times higher, legal liability for PV modules regulated as hazardous waste is also heightened with both civil and criminal penalties for noncompliance which includes making an inaccurate or faulty hazardous waste determination. The most common reason a PV module would be regulated as hazardous is if it contains a regulated metal in an amount that equals or exceeds the toxicity characteristic limits. To determine whether a PV module exhibits a hazardous characteristic, the regulated person/entity must "apply knowledge...in light of the materials and processes used." In the absence of adequate knowledge to determine whether the PV module is hazardous, it must be tested using Test Method 1311 Toxicity Characteristic Leaching Procedure (TCLP) or an equivalent EPA-approved method. Although TCLP is the predominant method used to today to make a hazardous waste determination for PV modules, evidence from this study concludes it is not practical to TCLP test every PV module even in a single utility-scale installation, and a scalable solution is needed. This study finds that knowledge-based hazardous waste determinations may allow a regulated person/entity to make a hazardous waste determination for more than one PV module at one time - making this regulatory pathway a potential scalable solution. Through legal analysis and interviews with 44 experts, the authors explore what it means to make an accurate knowledge-based hazardous determination for PV modules considering sources and forms of information as well as potential limitations. The work aims to provide a foundation for building consensus on whether knowledge-based hazardous determinations are a viable, scalable industry approach for solar.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1990

A global approach for the identification of structural connection properties

A general procedure is developed for identifying properties of structural joints. The procedure, which uses experimental response data, is considered general because it is applicable to any size or type of structural system. The present procedure, which identifies characteristics such as damping and stiffness, accommodates both linear and nonlinear joint properties and may process test data measured at arbitrary stations on the structural system. The method identifies joint characteristics by performing a global fit between predicted and measured data. It overcomes limitations of previous methods in that it can better deal with parameter-dependent constraints (e.g., gaps). The method is demonstrated with a simplified model of a bladed disk assembly having friction damping and mistuning.

Lawrence, Charles↗
NASA NTRS1985

Computational analysis of scramjet dual mode operation

One critical element in the design of a Scramjet is the detailed understanding of the complex flow field in the engine during various phases of operation. One area of interest is the computation of chemically reacting flows in the vicinity of flame holders. The characteristics of a method for solving the Navier-Stokes equations with chemical reactions are proposed. Also of interest are the flame holding characteristics of simple ramp and rearward facing steps. Both of these configurations are considered candidates for Scramjet flame holders.

Source record↗
NASA NTRS1986

Retrieval of composition and size distribution of stratospheric aerosols with the SAGE II satellite experiment

The SAGE II satellite system was launched on October 5, 1984. It has seven radiometric channels and is beginning to provide water vapor, NO2, and O3 concentration profiles and aerosol extinction profiles at a minimum of three wavelengths. A simple, fast and operational method of retrieving characteristics of stratospheric aerosols from the water vapor and three-wavelength aerosol extinction profiles is proposed. Some examples are given to show the practicality of the scheme. Possible sources of error for the retrieved values and the limitation of the proposed method are discussed. This method may also prove applicable to the study of aerosol characteristics in other multispectral extinction measurements.

Yue, Glenn K.↗
NASA NTRS1976

Interpolation of a surface from sets of discrete height data of different statistical characteristics

This paper presents and analyzes a method for the interpolation of a unique surface from two sets of independent digital height data of differing statistical characteristics. This method is based on linear prediction and thus relies on the concepts of auto- and cross-covariance functions. The linear prediction algorithm for two sets of digital height measurements is first derived and then evaluated using the method of moving averages and bilinear interpolation for comparison. It is found that the overall root mean square interpolation errors of linear prediction are similar to those from moving averages and bilinear interpolation. This accuracy performance, together with the well known potential for controlled filtering of measuring errors and good-behavior in areas of poor control, makes linear prediction a versatile and general method for interpolating a unique surface from two sets of digital height data, with applications in photogrammetric mapping, remote sensing, and other fields.

Leberl, F.↗
NASA NTRS1978

Theoretical and experimental study of the drag of multielement airfoils

The viscous/potential flow past single-element and multielement airfoils is studied theoretically and experimentally. A computerized analysis, based on iteratively coupled potential-flow and boundary-layer analysis, is used to predict the flow field of the airfoil. The method yields detailed characteristics of conventional laminar and turbulent boundary layers, turbulent wakes, and confluent boundary layers. The viscous flows are analyzed with a method that uses finite-difference solutions of the boundary-layer equations. Reynolds stress in the boundary layers and wakes is simulated with eddy viscosity models for the various flow zones. The viscous calculations are carried into the wake of the airfoil where the drag is found from the defect in the wake momentum.

Olson, L. E.↗
NASA NTRS1982

Design of supercritical cascades with high solidity

The method of complex characteristics of Garabedian and Korn was successfully used to design shockless cascades with solidities of up to one. A code was developed using this method and a new hodograph transformation of the flow onto an ellipse. This code allows the design of cascades with solidities of up to two and larger turning angles. The equations of potential flow are solved in a complex hodograph like domain by setting a characteristic initial value problem and integrating along suitable paths. The topology that the new mapping introduces permits a simpler construction of these paths of integration.

Sanz, J. M.↗