Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

From Fundamental Understanding To Predicting New Nanomaterials For High Capacity Hydrogen/Methane Storage and Carbon Capture

On-board hydrogen/methane storage in fuel cell-powered vehicles is a major component of the national need to achieve energy independence and protect the environment. The main obstacles in hydrogen storage are slow kinetics, poor reversibility and high dehydrogenation temperatures for the chemical hydrides; and very low desorption temperatures/energies for the physisorption materials (MOF’s, porous carbons). Similarly, the current methane storage technologies are mainly based on physisorption in porous materials but the gravimetric and volumetric storage capacities are below the target values. Finally, carbon capture, a critical component of the mitigation of CO 2 emissions from industrial plants, also suffers from similar problems. The solid-absorbers such as MOFs are either not stable against real flue-gas conditions and/or do not have large enough CO 2 capture capacity to be practical and cost effective. In this project, we addressed these challenges using a unique combination of computational, synthetic and experimental methods. The main scope of our research was to achieve fundamental understanding of the chemical and structural interactions governing the storage and release of hydrogen/methane and carbon capture in a wide spectrum of candidate materials. We studied the effect of scaffolding and doping of the candidate materials on their storage and dynamics properties. We reviewed current progress, challenges and prospect in closely related fields of hydrogen/methane storage and carbon capture. For example, for physisorption based storage materials, we show that tap-densities or simply pressing MOFs into pellet forms reduce the uptake capacities by half and therefore packing MOFs is one of the most important challenges going forward. For room temperature hydrogen storage application of MOFs, we argue that MOFs are the most promising scaffold materials for Ammonia-Borane (AB) because of their unique interior active metal-centers for AB binding and well defined and ordered pores. Here the main challenge is to find a chemically stable MOF required for regeneration of the AB-spent fuel. Finally, for carbon capture application of MOFs, we investigate the performance of a number of metal–organic frameworks with particular focus on their behavior at the low pressures commonly used in swing adsorption. This comparison clearly shows that it is the process that determines which MOF is optimal rather than there being one best MOF, though MOFs that possess enhanced binding at open metal sites generally perform better than those with high surface area.

03 NATURAL GAS↗

Design of Stratified Functional Nanoporous Materials for CO 2 Capture and Conversion

The objective of this project is to develop novel nanoporous materials for CO 2 capture and conversion. The motivation of this work is that capture of CO 2 from flue gas or the atmosphere coupled with catalytic hydrogenation of CO 2 into valuable chemicals and fuels can reduce the net amount of CO 2 in the atmosphere while providing liquid transportation fuels and other commodity chemicals. One approach to increasing the economic viability of carbon capture and conversion is to design a single material that can be used for both the capture and catalytic conversion of CO 2 , because such a material could increase efficiency through process intensification. We have used density functional theory (DFT) methods to design catalytic moieties that can be incorporated into various metal organic framework (MOF) materials. We chose to work with MOFs because they are highly tailorable, can be functionalized, and have been shown to selectively adsorb CO 2 over N 2 , which is a requirement for CO 2 capture from flue gas. Moreover, the incorporation of molecular catalytic moieties into MOF, through covalent bonding, produces a heterogeneous catalytic material having activities and selectivities close to those of homogeneous catalysts, but without the draw-backs associated with homogeneous catalysis.

36 MATERIALS SCIENCE↗

Electrochemical Membrane for Carbon Dioxide Capture and Power Generation

FuelCell Energy, Inc. (FCE), in collaboration with AECOM Corporation (formerly URS Corporation) and Pacific Northwest National Laboratory, has been developing a novel Combined Electric Power and Carbon-dioxide Separation (CEPACS) system. The CEPACS system is based on electrochemical membrane (ECM) technology derived from FCE’s carbonate fuel cell products featuring internal (methane steam) reforming and carrying the trade name of Direct FuelCell®. The unique chemistry of carbonate fuel cells offers an innovative approach for separation of CO 2 from existing fossil-fuel power plant exhaust streams (flue gases). The ECM-based CEPACS system has the potential to become a transformational CO 2 -separation technology by working as two devices in one: it separates the CO 2 from the exhaust of other plants such as an existing coal-fired plant and simultaneously produces clean electric power at high efficiency using a supplementary fuel. The development effort was carried out under the U.S. Department of Energy (DOE) cooperative agreement DE-FE0007634. The overall objective of this project was to successfully demonstrate the ability of FCE’s ECM-based CEPACS system technology to separate ≥90% of the CO 2 from a simulated Pulverized Coal (PC) power plant flue gas stream and to compress the captured CO2 to a state that can be easily transported for sequestration or beneficial use. In addition, a key objective was to show, through the technical and economic feasibility study and bench scale testing, that the ECM-based CEPACS system is an economical alternative for CO 2 capture in PC power plants, and that it meets DOE’s objective related to the incremental cost of electricity (COE) for post-combustion CO 2 capture (no more than 35% increase in COE). The project was performed in three budget periods (BP). The specific objective for BP1 was to complete the Preliminary Technical and Economic Feasibility Study. The T&EF study was based on the carbon capture system size suitable for a reference 550 MW PC power plant. The specific objectives for BP2 were to perform (flue gas) contaminant effect evaluation tests, small area membrane tests using clean simulated flue gas, design a flue gas pretreatment system for processing of the gas feed to ECM, update the Technical & Economic Feasibility Study (T&EFS) incorporating results of contaminant effect tests and small area membrane tests, and to prepare a test facility for bench scale testing. The specific objectives for BP3 were to perform bench scale testing (parametric and long-duration testing) of a 11.7 m 2 ECM-based CO 2 capture, purification and compression system, and update (as final) the Technical and Economic Feasibility Study. In addition, an Environmental Health and Safety evaluation (assessment) of the ECM technology was included. This final technical report presents the progress made under the project.

20 FOSSIL-FUELED POWER PLANTS↗

A Simple Correlation for Neutron Capture Rates from Nuclear Masses

Recent studies of neutron capture performed at LANL have revealed a previously unrecognized connection between nuclear masses and the average neutron capture cross section. A team of three scientists from Los Alamos (P-27), Yale Univ., and Istanbul Univ. (Turkey) recently discovered this connection and have published their results as a Rapid Communication in Physical Review C. Neutron capture is a reaction in which a free neutron is absorbed by the nucleus, keeping the element unchanged, but changing isotopes. This reaction is typically exothermic. As a result, the reaction can proceed even when many other reaction channels are closed. In an astrophysical environment, this means that neutron capture is the primary mechanism by which all of the elements with atomic number greater than nickel are produced is neutron capture.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Development of Mixed-Salt Technology for CO 2 Capture from Coal Power Plants

SRI International (SRI), in collaboration with Stanford University, OLI Systems (OLI), Politecnico de Milano (PoliMi), and Aqueous Systems Aps (ASApS) performed a 45-month effort to develop a promising Mixed-Salt Process (MSP) for carbon dioxide capture. The MSP combines existing ammonia and potassium-carbonate technologies with improved absorption steps for rate enhancement and ammonia emission reduction and a novel selective regeneration process with a high-pressure CO 2 product to introduce a new and advanced transformational solvent-based technology. The striking advantages of the SRI MSP include: low heat of reaction, high loading of CO 2 , high-pressure regeneration of > 99% pure dry CO 2 , low sensitivity to impurities, low process cost, use of a non-degradable low-cost solvent with a very low carbon footprint for its production, low emissions, and reduced water use compared to the state-of-the-art ammonia-based and amine technologies. The overall objective of the project was to develop and test a solvent-based CO 2 capture technology that can capture CO 2 from existing or new pulverized coal (PC) power plants at low cost. Our specific goal was to test SRI’s newly developed MSP at the large bench-scale level to demonstrate that the process could capture CO 2 at high efficiency (> 90%) with very high CO 2 loading (> 10 wt.%), require less than 2 GJ/tonne for solvent regeneration, and produce a CO 2 stream at high pressure with a purity > 95 vol.%. This 45-month MSP development program was designed to conduct (1) extensive test campaigns with different process flowsheet variants, and (2) detailed thermodynamic, kinetic, and process modeling. These tests and models were very important to identify any issues associated with the process in the early stages and then resolve them before moving into the next scale-up (> 1 MWe scale) testing. The technology development plan consisted of balanced experimental and process modeling activities as shown in Figure i. Such an approach reduces the risks associated with the process operability at large scales and provides capital and operating expenditure (CAPEX/OPEX) predictions with improved accuracies. Under the MSP development program at SRI, we performed an aggressive testing campaign with individual subsystems as well as integrated CO 2 capture and regeneration system to identify the best operating conditions. The project was carried out in two budget periods (BP1 & BP2).

20 FOSSIL-FUELED POWER PLANTS↗

Development of Mixed-Salt Technology for CO 2 Capture from Coal Power Plants (Final Report)

SRI International (SRI), in collaboration with Stanford University, OLI Systems (OLI), Politecnico de Milano (PoliMi), and Aqueous Systems Aps (ASApS) performed a 45-month effort to develop a promising Mixed-Salt Process (MSP) for carbon dioxide capture. The MSP combines existing ammonia and potassium-carbonate technologies with improved absorption steps for rate enhancement and ammonia emission reduction and a novel selective regeneration process with a high-pressure CO 2 product to introduce a new and advanced transformational solvent-based technology. The striking advantages of the SRI MSP include: low heat of reaction, high loading of CO 2 , high-pressure regeneration of > 99% pure dry CO 2 , low sensitivity to impurities, low process cost, use of a non-degradable low-cost solvent with a very low carbon footprint for its production, low emissions, and reduced water use compared to the state-of-the-art ammonia-based and amine technologies. The overall objective of the project was to develop and test a solvent-based CO 2 capture technology that can capture CO 2 from existing or new pulverized coal (PC) power plants at low cost. Our specific goal was to test SRI’s newly developed MSP at the large bench-scale level to demonstrate that the process could capture CO 2 at high efficiency (> 90%) with very high CO 2 loading (> 10 wt.%), require less than 2 GJ/tonne for solvent regeneration, and produce a CO2 stream at high pressure with a purity > 95 vol.%. This 45-month MSP development program was designed to conduct (1) extensive test campaigns with different process flowsheet variants, and (2) detailed thermodynamic, kinetic, and process modeling. These tests and models were very important to identify any issues associated with the process in the early stages and then resolve them before moving into the next scale-up (> 1 MWe scale) testing. Such an approach reduces the risks associated with the process operability at large scales and provides capital and operating expenditure (CAPEX/OPEX) predictions with improved accuracies. Under the MSP development program at SRI, we performed an aggressive testing campaign with individual subsystems as well as integrated CO 2 capture and regeneration system to identify the best operating conditions. The project was carried out in two budget periods (BP1 & BP2).

20 FOSSIL-FUELED POWER PLANTS↗

Atmospheric CO 2 Capture and Membrane Delivery (Final Report)

Motivation: A major bottleneck for growing microalgae as a sustainable alternative to fossil carbon in economically producing fuels and chemical products is the cost of delivering CO 2 in sufficient concentrations for it not to limit growth. This project sought to develop and integrate two innovative technologies for capturing and concentrating CO 2 from air and delivering it to microalgae with high efficiency into an Atmospheric CO 2 Enrichment and Delivery (ACED) system. The CO 2 capture technology is based on moisture swing sorption (MSS), where specialized resin materials selectively capture CO 2 when dry and release it when wet into a confined space where the concentration can be increased up to 500-fold. The CO 2 -delivery technology is based on membrane carbonation (MC), which uses hollow fiber membranes that allow CO 2 to diffuse into the algae-containing liquid without forming bubbles, achieving nearly 100% delivery efficiency. Work completed: 1. Subsystem design, construction, and characterization [Months 1-6]. ACED integration requirements were defined; prototype MSS and MC sub-systems were constructed to conform to these requirements and characterized independently. 2. Subsystem optimization and evaluation [Months 7-12]. An iterative process of operating and upgrading each subsystem at lab scale, leading to compatibility at full integration. 3. System Integration with open raceway, testing, and modeling [Months 13-24]. Operation and testing of the integrated ACED system in an open raceway pond and modeling. Broader impacts: The ACED research program added to our understanding of 1) MC technology’s (i.e., hollow fiber membranes) utility for transferring pure CO 2 and CO 2 gas mixtures into microlagal cultures in laboratory and outdoor environments, 2) the first-of-a-kind MSS technology to capture CO 2 from ambient outdoor air, and 3) methods for storing captured CO 2 in carbonate/bicarbonate brines from which the CO 2 can be retrieved at high concentration (> 90%). Near-term commercial opportunities were outlined for the MC technology for small scale algae cultivation with high CO 2 costs (> $100/ton) and larger scale operators with continued development. This will help reduce costs for producing sustainable fuels and products and reduce cost for microalgal research for developing new applications. Research areas were identified for MSS technology to achieve cost competitive CO 2 produced from ambient air ($100/ton) as a means for closing the carbon cycle to make products from atmospheric CO 2 instead of fossil fuels and remove CO 2 from air to mitigate climate change.

09 BIOMASS FUELS↗

Development of a Pre-combustion CO 2 Capture Process Using High-Temperature PBI Hollow-Fiber Membranes

The overall goal of this research project was to develop a high-temperature, membrane-based CO 2 capture technology for coal gasification facilities and make progress toward meeting overall fossil energy performance goals of CO 2 capture with 95% CO 2 purity at a cost of electricity (COE) 30% less than baseline capture approaches. The primary objectives of the project were to evaluate, at a bench-scale size, a technically and economically viable CO 2 capture system based on a high-temperature polybenzimidazole (PBI) polymer hollow-fiber membrane (HFM) separation system, and to optimize the process for integration of that system into an integrated gasification combined cycle (IGCC) plant. The specific objectives of the proposed project are to: (1) fabricate high-performance PBI-HFMs for H 2 /CO 2 separation; (2) collect laboratory data for separating hydrogen from simulated synthesis gas using PBI-based membrane modules; (3) transfer the membrane fabrication technology to an industrial firm that specializes in the manufacture of HFMs; (4) fabricate membrane modules to process a syngas stream (50 kWth) equivalent to that of shifted gas from an oxygen-blown gasifier; (5) obtain design and steadystate performance data for membrane modules using syngas from an operating coal gasifier; (6) estimate the cost of CO 2 capture from pre-combustion gas streams integrated into a 550-MW (net) power plant; and (7) conduct a process environmental health & safety (EH&S) assessment.

01 COAL, LIGNITE, AND PEAT↗

Effect of changes of physical properties on CO2 capture solvents on its absorption rate

Concern over greenhouse gas emissions, such as CO2 from fossil fuel combustion, is leading to new regulations on fossil-fuel fired power generation facilities. Using amine-based solutions for CO2 capture in power plants is the most common method utilized industrially and studied in the laboratory environment. However, a limited number of amines are available for carbon capture research after balancing the capital cost and energy penalty. In the carbon capture process, physical properties such as viscosity, surface tension, wettability, etc. are found to play important roles in solvent performance. In this context, we are exploring an approach to enhance the CO2 capture of amine solvents by tuning the physical properties of the amine solvents by the addition of additives. These additives in the amine solution utilize controlled bubble generation to increase liquid-gas contact surface area. This method can increase mass transfer in the absorber column, specifically at the bottom where the mass transfer is limited. These additives can enhance the CO2 capture efficiency by changing the physical property of the solvent which in turn can lower the capital cost associated with the system. This work can be applied to all common aqueous amine solvent and would be of great interest to those in the CCS community.

20 FOSSIL-FUELED POWER PLANTS↗

A combined biological and chemical flue gas utilization system towards carbon dioxide capture from coal-fired power plants (Final Report)

Photosynthetic algal cultivation has been intensively studied for CO 2 capture and utilization for several decades. The footprint for using algae to capture CO 2 emitted from carbon-intensive industrial processes (power plants, cement plants, and fermentation processes) is extremely large, which creates serious technical and economic hurdles that must be cleared if algal technologies are to be commercially implemented. Fortunately, algal biomass is rich in proteins, carbohydrates, and lipids, providing a good chemical source for organic absorbents and other value-added chemical feedstocks. In particular, amino acids from algal protein can be used to generate amino acid salt solutions that have been proven to be effective for capturing CO 2 . In order to take advantage of both algal cultivation and biomass utilization, the goal of the proposed project is to develop a combined biological and chemical system for coal-fired power plants for sequestering CO 2 in biological absorbents and generating value-added products. This approach significantly reduces the land and energy footprint of CO 2 capture, and minimizes capital and operational expenses. Three specific objectives are targeted: 1) optimizing the growth of the selected algal strain to maximize biomass accumulation from the coal-fired flue gas; 2) developing a cascade biomass utilization to produce amino acid absorbents, polyurethanes, biodiesel, and methane; and 3) conducting techno-economic analysis (TEA) and life cycle assessment (LCA) of the proposed process. Three key technical outcomes were achieved: (1) With the selected robust algal strain and unique photobioreactor design, long-term culture stability can be extended, and algal biomass productivity reached 0.5 g dry biomass/L/day year-round at a biomass concentration of 1.2 g/L in the pilot photobioreactor; (2) The biomass utilization process led to complete utilization of the algal biomass to produce amino acid salt absorbent, polyurethanes, and methane; and (3) The combined biological and chemical flue gas utilization process concluded a technically and economically feasible commercial-scale system that completely captures CO 2 in coal-fired flue gas with greatly reduced energy consumption.

01 COAL, LIGNITE, AND PEAT↗

Development and Bench-Scale Testing of a Novel Biphasic Solvent-Enabled Absorption Process for Post-Combustion Carbon Capture (Final Technical Report)

A new class of biphasic solvents was developed, and the concept of the enabled carbon dioxide (CO 2 ) absorption process was tested for post-combustion carbon capture in our previous lab-scale research. The primary goals of this project were to advance the development of the novel biphasic CO 2 absorption process (BiCAP) and validate its technical advantages by testing the integrated technology at a 40 kWe bench-scale with actual coal-derived flue gas in a power plant environment. The project was led by the University of Illinois at Urban-Champaign (UIUC), and Trimeric Corporation served as a sub-awardee providing support in basic design and techno-economic studies. To achieve the project goals and objectives, solvent management studies, process modeling and optimization, bench-scale equipment design, construction and testing, and technical, economic and environmental assessments have been conducted. The two top-performing biphasic solvents developed in our previous research were used in this project. Biphasic solvent emissions and control were investigated in the laboratory. The emissions of the biphasic solvents from the absorber were comparable to or lower than the reference 30 wt% monoethanolamine (MEA) solution, while they could be more effectively removed in the water wash column. Lab-scale testing of solvent degradation reclamation has revealed that vacuum distillation was feasible for biphasic solvent reclamation. Aspen Plus models were used to optimize the BiCAP, and a CO 2 stripping configuration introducing a secondary cold solvent feed to the stripper was identified to be the most energy efficient. A 40 kWe bench-scale, integrated BiCAP system was successfully designed, fabricated, and installed at the UIUC’s Abbott Power Plant. Parametric testing with synthetic flue gas has demonstrated that the two biphasic solvents required a more than 40% lower heat duty for CO 2 desorption as compared to the reference MEA tested on the same bench-scale skid. Slipstream testing with actual coal flue gas for a total of 31 days in two test campaigns has further demonstrated stable operation of the bench-scale skid. During the first campaign targeting 90% CO 2 removal, the heat duty averaged at 2,183 MJ/tonne of CO 2 captured and during the second campaign targeting 95% removal, the heat duty averaged at 2,450 MJ/tonne of CO 2 captured. A techno-economic analysis has revealed that for integration of the BiCAP into a 650-MWe pulverized coal-fired power plant, the parasitic power loss was reduced by ~20%, and the cost of CO 2 capture was reduced by ~21% ($36.3/tonne on a December 2018 dollar basis) compared to the U.S. Department of Energy (DOE)’s baseline Case B12B. As progression from this bench-scale development effort, a new project “Engineering-Scale Testing of the Biphasic Solvent Based CO 2 Absorption Capture Technology at a Covanta Waste-to-Energy Facility” was awarded by the DOE, launched in February 2023, to allow the team to further test the technology and demonstrate its technical and economic advantages at a pilot scale.

20 FOSSIL-FUELED POWER PLANTS↗

CO2 Capture from Biofuels Production and Storage into the Mt Simon Sandstone

Advanced carbon capture and storage (CCS) technologies offer significant potential for reducing anthropogenic carbon dioxide (CO2) emissions, while minimizing the cost of employing these technologies. Under the Industrial Carbon Capture and Storage (ICCS) Program, the U.S. Department of Energy (DOE) collaborated with industry in cost-sharing arrangements to demonstrate technologies that captured CO2 emissions from industrial sources and either stored or beneficially re-use them. The technologies included in the ICCS program progressed beyond the research and development stage to a scale that can be deployed into commercial practice within the industry. The Illinois Industrial Carbon Capture and Storage (IL-ICCS) project sought to demonstrate the ability of the Mt. Simon Sandstone to accept and retain industrial-scale volumes of carbon dioxide (CO2) from an anthropogenic source for permanent geologic sequestration. The project was a collaboration of Archer Daniels Midland (ADM) Company, the Illinois State Geological Survey (ISGS), Schlumberger Carbon Services (SCS), and Richland Community College (RCC), and had average annual injection rate of between 1,500 and 2,400 metric tons per day (MTPD) or 0.5 to 0.7 million metric tons (MMT) annually. The project site is in Decatur, Illinois on the property of ADM and RCC (Fig 1) and is directly adjacent to the Illinois Basin – Decatur Project (IBDP), a large scale pilot project of the Midwest Geological Sequestration Consortium (MGSC), which collected and injected CO2 from the ADM fuel ethanol production unit, where high purity biogenic CO2 is produced during the anaerobic fermentation of sugars to alcohol. The IL-ICCS project had an operational period of approximately six (6) years, in which 3.5 MMT of CO2 was captured, compressed, injected, and permanently stored in the Mt Simon Sandstone.

01 COAL, LIGNITE, AND PEAT↗

Engineering Design of a Polaris Membrane CO 2 Capture System at a Cement Plant

Sargent & Lundy (S&L) and Membrane Technology and Research, Inc. (MTR) in cooperation with CEMEX, completed an initial engineering design study to evaluate the retrofit of MTR’s membrane-based post-combustion carbon dioxide (CO 2 ) capture technology to the CEMEX Balcones cement plant (Balcones) Kiln 2. The CO 2 capture plant is designed to treat the entire flue gas flow from Kiln 2; it is estimated that this system will capture 2,039 tonnes/day per day (TPD) of CO 2 , approximately 75% of current CO 2 emissions from the kiln. The captured CO 2 is compressed to 2,213 psia (152.58 bara) before flowing to the capture plant boundary tie-point. It was assumed for this study that the CO 2 would be pumped off-site and transferred by pipeline to either a CO 2 storage complex for geological sequestration or elsewhere for Enhanced Oil Recovery (EOR).

42 ENGINEERING↗

Enabling Production of Low Carbon Emissions Steel through CO 2 Capture from Blast Furnace Gases at Cleveland Cliffs’ 5 mtpa Steel Plant at Burns Harbor, Indiana

Dastur International Inc. has prepared a DOE-funded Pre-front-end engineering design (Pre-FEED) study to capture up to 2.8 mtpa of CO 2 from the available Blast Furnace (BF) gases at the Burns Harbor steel plant operated by Cleveland Cliffs in Burns Harbor, Indiana. The project consists of an amine solvent based pre-combustion carbon capture system, along with a unique BF gas conditioning process which significantly optimizes the project design and architecture in terms of higher volumes (2.8 mtpa vis-à-vis 1.6 mtpa without conditioning) & concentration (32 vol% in conditioned gas vs. 22% in raw BF gas) of CO 2 , which can be captured using a single train, resulting in reduced size and capital cost of the CO 2 capture island, and improved overall economics on a $\$$/tCO 2 captured basis.

42 ENGINEERING↗

Carbon Capture Pilot at Vicksburg Containerboard Mill (Final Technical Report)

This is the final technical report for the DOE-OCED project DE-CD0000051. The report provides the progress at the close of the project. The objective of the project is to design and build a large pilot plant for carbon dioxide (CO 2 ) capture from a pulp and paper (P&P) mill using RTI’s non-aqueous solvent (NAS) technology at a capacity of 120,000 t-CO 2 /year, with >90% CO 2 captured. The pilot plant will be used for testing and evaluating the NAS capture process using real flue gas from the P&P mill’s power boiler for a minimum of 1 year of parametric testing and a minimum of 2,000 hours of continuous long-term testing. The testing will provide data for process optimization and scale-up for the P&P industry, provide information on interaction of flue gas contaminants on solvent performance and degradation, and inform strategies for emission control. At the end of the project, the pilot plant will be managed by International Paper (IP), the host site owner, which will continue to capture CO 2 , sequester the captured CO 2 , and be eligible for the 45Q credit.

42 ENGINEERING↗

Transformational Molecular Layer Deposition Tailor-Made Size-Sieving Sorbents for Post-Combustion CO 2 Capture

This report summarizes the carbon capture research and development conducted by The State University of New York at Buffalo (UB), University of South Carolina (USC), GTI Energy (GTI), and Rensselaer Polytechnic Institute (RPI) for U.S. Department of Energy (DOE) project DE-FE0031730 titled “Transformational Molecular Layer Deposition Tailor-made Size-Sieving Sorbents for Post-Combustion CO 2 capture.” The objective of this project was to develop a transformational molecular layer deposition (MLD) tailor-made size-sieving sorbent integrated with a pressure swing adsorption (PSA) cycle schedule that can be installed in new or retrofitted into existing pulverized coal (PC) power plants for CO 2 capture with a cost of electricity at least 30% lower than a supercritical PC power with CO 2 capture, or approximately $\$$30 per tonne of CO 2 captured, and with it being ready for demonstration by 2030.

20 FOSSIL-FUELED POWER PLANTS↗

Carbon Capture on Air Liquide United States Gulf Coast Steam Methane Reformer using the Cryocap TM Flue Gases Process

The objective of this DOE-funded project is to execute and complete a Front-End Engineering and Design (FEED) study for a commercial-scale carbon capture project for Air Liquide’s Steam Methane Reformer (SMR) located at La Porte, near Houston, Texas. The Host Site is one of Air Liquide’s largest SMR assets, and supplies hydrogen to the Air Liquide Gulf Coast Hydrogen System, which serves refiners and petrochemical manufacturers through an existing H2 pipeline spanning roughly 200 miles from Port Arthur, TX to Bay City, TX. The Host Site produces up to 116.5 million standard cubic feet per day (MMSCFD) of gaseous hydrogen and emits approximately 950 ktpy CO 2 at the nameplate capacity. The evolving importance of decarbonized H2 for both existing customers and new markets, as well as the availability and intent of prominent third-party partners to transport and sequester captured CO 2 in locally abundant geological sites for 45Q credits, make the AL US Gulf Coast SMR an ideal site for the proposed FEED study. The envisioned carbon capture system is based on Air Liquide’s proprietary Cryocap™ Flue Gas (FG) process. The integration of the Cryocap™ FG technology to the existing SMR would enable the capture of 900 ktpy of CO 2 , with a net carbon capture rate of >95% and with minimum impact on the levelized cost of hydrogen produced at 99.97% purity.

03 NATURAL GAS↗

Integrated carbon capture and conversion: A review on C 2+ product mechanisms and mechanism-guided strategies

The need to reduce atmospheric CO 2 concentrations necessitates CO 2 capture technologies for conversion into stable products or long-term storage. A single pot solution that simultaneously captures and converts CO 2 could minimize additional costs and energy demands associated with CO 2 transport, compression, and transient storage. While a variety of reduction products exist, currently, only conversion to C 2+ products including ethanol and ethylene are economically advantageous. Cu-based catalysts have the best-known performance for CO 2 electroreduction to C 2+ products. Metal Organic Frameworks (MOFs) are touted for their carbon capture capacity. Thus, integrated Cu-based MOFs could be an ideal candidate for the one-pot capture and conversion. In this paper, we review Cu-based MOFs and MOF derivatives that have been used to synthesize C 2+ products with the objective of understanding the mechanisms that enable synergistic capture and conversion. Furthermore, we discuss strategies based on the mechanistic insights that can be used to further enhance production. Finally, we discuss some of the challenges hindering widespread use of Cu-based MOFs and MOF derivatives along with possible solutions to overcome the challenges.

42 ENGINEERING↗