SEARCH · Search NASA

Results for “Deep Space Navigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS2017

Spacecraft Charging Considerations and Design Efforts for the Orion Crew Module

The Orion Crew Module (CM) is nearing completion for the next flight, designated as Exploration Mission 1 (EM-1). For the uncrewed mission, the flight path will take the CM through a Perigee Raise Maneuver (PRM) out to an altitude of approximately 1800 km, followed by a Trans-Lunar Injection burn, a pass through the Van Allen belts then out to the moon for a lunar flyby, a Distant Retrograde Insertion (DRI) burn, a Distant Retrograde Orbit (DRO), a Distant Retrograde Departure (DRD) burn, a second lunar flyby, an Earth Insertion (EI) burn, and finally entry and landing. All of this, with the exception of the DRO associated maneuvers, is similar to the previous Apollo 8 mission in late 1968. In recent discussions, it is now possible that EM-1 will be a crewed mission, and if this happens, the orbit may be quite different from that just described. In this case, the flight path may take the CM on an out and back pass through the Van Allen belts twice, then out to the moon, again passing through the Van Allen belts twice, then finally back home. Even if the current EM-1 mission doesn't end up as a crewed mission, EM-2 and subsequent missions will undoubtedly follow orbital trajectories that offer comparable exposures to heightened vehicle charging effects. Because of this, and regardless of flight path, the CM vehicle will likely experience a wide range of exposures to energetic ions and electrons, essentially covering the gamut between low earth orbit to geosynchronous orbit and beyond. National Aeronautical and Space Administration (NASA) and Lockheed Martin (LM) engineers and scientists have been working to fully understand and characterize the vehicle's immunity level with regard to surface and deep dielectric charging, and the ramifications of that immunity level pertaining to materials and impacts to operational avionics, communications, and navigational systems. This presentation attempts to chronicle these efforts in a summary fashion, and attempts to capture the results of that work as they pertain to the electrical and avionic systems on-board the Orion CM.

Scully, Bob↗

NASA NTRS2016

Deep Space Positioning System

A single, compact, lower power deep space positioning system (DPS) configured to determine a location of a spacecraft anywhere in the solar system, and provide state information relative to Earth, Sun, or any remote object. For example, the DPS includes a first camera and, possibly, a second camera configured to capture a plurality of navigation images to determine a state of a spacecraft in a solar system. The second camera is located behind, or adjacent to, a secondary reflector of a first camera in a body of a telescope.

Vaughan, Andrew T.↗

NASA NTRS2018

Large Satellite Bus Reliability

NASA is proposing to build a small space station in Cis-lunar orbit called Deep Space Gateway (DSG). At the heart of the DSG is the Power and Propulsion Element (PPE) which is conceptually similar to previously designed and operated satellite buses. A satellite bus is composed of the satellite spacecraft infrastructure minus the payload, and generally includes power, propulsion, avionics, and guidance, navigation and control. In November of 2017, five companies were awarded contracts by NASA to research PPE designs. In order to better understand the reliability of large satellite buses which may be the starting point of the PPE, NASA used Weibull analysis to evaluate spacecraft with similar masses and design life to the PPE. In addition, a subset of the large satellites which had satellite buses manufactured by any one of the five companies was also evaluated. This paper provides the results of the reliability analysis and compares the reliability of the general population of large satellites to the reliability associated with large satellite buses manufactured by the five companies currently studying PPE options.

Bus↗

NASA NTRS2024

Flight Dynamics and Navigation Performance of the BioSentinel Mission

BioSentinel was one of ten CubeSats launched by the Space Launch System (SLS) as part of the Artemis I campaign on 16 November 2022. A lunar flyby gave BioSentinel the needed energy to escape the Earth-Moon system into heliocentric space. The biological payload contains yeast cells designed to measure radiation in deep space beyond the reach of Earth’s magnetosphere. This paper discusses in detail the BioSentinel flight performance, as well as challenges and lessons learned prior to, and during the mission.

BioSentinel↗

NASA NTRS2018

Daring You to Ask What If? Centennial Challenges

Centennial Challenges: Cube Quest - Propulsion, communication around Moon and into deep space; 3D-Printed Habitat - Additive construction for in-space habitats using regolith and recyclables; Vascular Tissue - 3D-printed human organ tissue to advance medicine in space and on Earth; CO2 Conversion - Bio-manufacturing using carbon dioxide and in-situ resources on Mars; Space Robotics II - Autonomous robotic navigation and decision systems for ISRU tasks.

Centennial challenges↗

NASA NTRS2006

DSMS Services and Capabilities

This viewgraph presentation reviews Interplanetary Network Directorate Deep Space Mission Systems services and support capabilities. The contents include: 1) Organization Chart; 2) IND DSMS Support Facilities; 3) Standard Services; and 4) Support Capabilities including Telemetry, command and tracking.

communications↗

NASA NTRS2017

Deployable Propulsion and Power Systems for Solar System Exploration

NASA is developing thin-film based, deployable propulsion, power and communication systems for small spacecraft that could provide a revolutionary new capability allowing small spacecraft exploration of the solar system. The Near Earth Asteroid (NEA) Scout reconnaissance mission will demonstrate solar sail propulsion on a 6U CubeSat interplanetary spacecraft and lay the groundwork for their future use in deep space science and exploration missions. Solar sails use sunlight to propel vehicles through space by reflecting solar photons from a large, mirror-like sail made of a lightweight, highly reflective material. This continuous photon pressure provides propellantless thrust, allowing for very high delta V maneuvers on long-duration, deep space exploration. Since reflected light produces thrust, solar sails require no onboard propellant. The Lightweight Integrated Solar Array and Transceiver (LISA-T) is a launch stowed, orbit deployed array on which thin-film photovoltaic and antenna elements are embedded. Inherently, small satellites are limited in surface area, volume, and mass allocation; driving competition between power, communications, and GN&C (guidance navigation and control) subsystems. This restricts payload capability and limits the value of these low-cost satellites. LISA-T is addressing this issue, deploying large-area arrays from a reduced volume and mass envelope - greatly enhancing power generation and communications capabilities of small spacecraft. The NEA Scout mission, funded by NASA's Advanced Exploration Systems Program and managed by NASA MSFC, will use the solar sail as its primary propulsion system, allowing it to survey and image one or more NEA's of interest for possible future human exploration. NEA Scout uses a 6U cubesat (to be provided by NASA's Jet Propulsion Laboratory), an 86 sq m solar sail and will weigh less than 12 kilograms. NEA Scout will be launched on the first flight of the Space Launch System in 2018. Similar in concept to the NEA Scout solar sail, the LISA-T array is designed to fit into a very small volume and provide abundant power and omnidirectional communications in just about any deployment configuration. The technology is being proposed for flight validation as early as 2019 in a low earth orbit demonstration using a 3U cubesat, of which less than 1U will be devoted to the LISA-T power and propulsion system. By leveraging recent advancements in thin films, photovoltaics and miniaturized electronics, new mission-level capabilities will be enabled aboard lower-cost small spacecraft instead of their more expensive, traditional counterparts, enabling a new generation of frequent, inexpensive deep space missions.

Johnson, Les↗

DOE OSTI2024

Uncertainty Quantification and Sensitivity Analysis of Low-Dimensional Manifold via Co-Kurtosis PCA in Combustion Modeling

For multi-scale multi-physics applications e.g., the turbulent combustion code Pele, robust and accurate dimensionality reduction is crucial to solving problems at exascale and beyond. A recently developed technique, Co-Kurtosis based Principal Component Analysis (CoK-PCA) which leverages principal vectors of co-kurtosis, is a promising alternative to traditional PCA for complex chemical systems. To improve the effectiveness of this approach, we employ Artificial Neural Networks for reconstructing thermo-chemical scalars, species production rates, and overall heat release rates corresponding to the full state space. Our focus is on bolstering confidence in this deep learning based non-linear reconstruction through Uncertainty Quantification (UQ) and Sensitivity Analysis (SA). UQ involves quantifying uncertainties in inputs and outputs, while SA identifies influential inputs. One of the noteworthy challenges is the computational expense inherent in both endeavors. To address this, we employ the Monte Carlo methods to effectively quantify and propagate uncertainties in our reduced spaces while managing computational demands. Our research carries profound implications not only for the realm of combustion modeling but also for a broader audience in UQ. By showcasing the reliability and robustness of CoK-PCA in dimensionality reduction and deep learning predictions, we empower researchers and decision-makers to navigate complex combustion systems with greater confidence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1991

MUSES-A

The MUSES-A spacecraft mission objectives are to study the effect of a double lunar swingby technique, lunar orbital insertion, obtain experience using optical navigation equipment, measure mass and momentum of micrometeoroids by using a particle dust counter, and to support a packet telemetry and Reed-Solomon coding experiment by using a newly developed fault tolerant onboard computer. A flight profile is given, and information is presented in tabular form on the following topics: Deep Space Network support, frequency assignments, telemetry, command, and tracking support responsibility.

Nishimura, T.↗

NASA NTRS2006

The NASA Space Communications Data Networking Architecture

The NASA Space Communications Architecture Working Group (SCAWG) has recently been developing an integrated agency-wide space communications architecture in order to provide the necessary communication and navigation capabilities to support NASA's new Exploration and Science Programs. A critical element of the space communications architecture is the end-to-end Data Networking Architecture, which must provide a wide range of services required for missions ranging from planetary rovers to human spaceflight, and from sub-orbital space to deep space. Requirements for a higher degree of user autonomy and interoperability between a variety of elements must be accommodated within an architecture that necessarily features minimum operational complexity. The architecture must also be scalable and evolvable to meet mission needs for the next 25 years. This paper will describe the recommended NASA Data Networking Architecture, present some of the rationale for the recommendations, and will illustrate an application of the architecture to example NASA missions.

Israel, David J.↗

NASA NTRS2023

Effect of Scattering Angle on DSCOVR/EPIC Observations

The Earth Polychromatic Imaging Camera (EPIC) on the Deep Space Climate Observatory (DSCOVR) routinely captures reflected radiation from the whole sunlit side of the Earth in the near backward direction to monitor the changing planet. The instrument had routinely operated until 27 June 2019, when the spacecraft was placed in an extended safe hold due to degradation of an inertial navigation unit. DSCOVR returned to full operations on 2 March 2020. Since then, the range of scattering angles between the incident sunlight and sensor direction has been larger than before and the largest scattering angle reaches ∼178°, only 2° from perfect backscattering, proving a unique opportunity to study the top-of-atmosphere (TOA) reflectance under such extreme conditions. In the paper, we compare EPIC global spectral reflectances in 2021–2016. We found that there are four occasions when the scattering angle reaches about 178° and associated with them enhanced global daily average spectral reflectances in 2021. The scattering angle related reflectance enhancements are not found in 2016 data when the maximum scattering angle is about 174.5°. CERES data do not show such occasions in global daily reflected shortwave flux. As a result, those enhanced reflectance occasions are primarily due to the change in scattering angle. The enhancement due to changes in scattering angle depends strongly on wavelength, primarily because of wavelength dependence of cloud scattering phase function. Radiative transfer calculations show that the change in scattering angles has the largest impact on reflectance in the red and NIR channels at 680 nm and 780 nm and the smallest influence on reflectance in the UV channel at 388 nm, consistent with EPIC observations. The change of global average cloud amount also plays an important role in the reflectance enhancement. The influence of the cloud effect depends on whether the change is in phase or not with the change of scattering angle.

DSCOVR EPIC↗

NASA NTRSDate not supplied

A Technical Overview of the Mission Engagement Onboarding Process Managed by the Mission Engagement Working Group (MEWG)

NASA's intricate network, encompassing the Near Space Network (NSN) and Deep Space Network (DSN), plays a pivotal role in supporting an array of space missions. These range from those in Low Earth Orbit (LEO) and Geosynchronous Orbit (GEO), to the more distant Cislunar and Deep Space endeavors. To manage the vast communications needs, we utilize multiple ground stations globally, coupled with the Tracking and Data Relay Satellite System (TDRSS). The Mission Engagement Working Group (MEWG), within the Commercialization, Innovation, and Synergies (CIS) division, stands as the primary gateway for all Space Communications and Network (SCaN) communication and navigation requests. This includes not only NASA's internal missions but also extends to other governmental agencies and commercial sector endeavors. How does the MEWG Process Work? - Initial Contact : Clients initiate their interaction with the NSN by submitting their service requirements through a dedicated online portal. - Preliminary Assessment by MEWG: Upon submission, MEWG embarks on a primary screening of the request. This involves evaluating the client's identity and the foundational concept of their mission. - Detailed Analysis by the NSN Team: Parallelly, the NSN team conducts a comprehensive review of the service request. This often necessitates additional clarification from the requester, ensuring that the final assessment is both thorough and accurate. - Coordination & Streamlining: MEWG's overarching objective is to effectively log, classify, orchestrate, and guarantee that pertinent actions are delegated based on initial client interactions. Acting as the central hub for these primary contacts, MEWG ensures that each request is sufficiently detailed for an in-depth evaluation. - Feedback & Remediation: If a request is deemed unsuitable or lacking, MEWG doesn't merely reject it. Instead, the team discerns the reasons for the inadequacy and suggests potential rectification strategies. This approach ensures that feedback delivered to clients is precise, prompt, constructive, and actionable. Conclusion: This plenary presentation will detail the efforts of the MEWG resulting in a greatly streamlined and refined onboarding process for space communication Direct-To-Earth (DTE) and Space Relay (SR) support requests. By centralizing the preliminary interactions and assessments, we've reduced the complexity for clients, ensuring they engage with a singular, efficient, and responsive point of contact. This initiative, we believe, fortifies NASA's commitment to fostering effective and synergistic collaborations with its partners.

Devin L Bitner↗

NASA NTRSDate not supplied

A Technical Overview of the Mission Engagement Onboarding Process Managed by the Mission Engagement Working Group (MEWG)

Devin Bitner↗

NASA NTRS2017

Strain Monitoring of Flexible Structures

One of the biggest challenges facing NASA's deep space exploration goals is structural mass. A long duration transit vehicle on a journey to Mars, for example, requires a large internal volume for cargo, supplies and crew support. As with all space structures, a large pressure vessel is not enough. The vehicle also requires thermal, micro-meteoroid, and radiation protection, a navigation and control system, a propulsion system, and a power system, etc. As vehicles get larger, their associated systems also get larger and more complex. These vehicles require larger lift capacities and force the mission to become extremely costly. In order to build large volume habitable vehicles, with only minimal increases in launch volume and mass, NASA is developing lightweight structures. Lightweight structures are made from non-metallic materials including graphite composites and high strength fabrics and could provide similar or better structural capability than metals, but with significant launch volume and mass savings. Fabric structures specifically, have been worked by NASA off and on since its inception, but most notably in the 1990's with the TransHAB program. These TransHAB developed structures use a layered material approach to form a pressure vessel with integrated thermal and micro-meteoroid and orbital debris (MMOD) protection. The flexible fabrics allow the vessel to be packed in a small volume during launch and expand into a much larger volume once in orbit. NASA and Bigelow Aerospace recently installed the first human-rated inflatable module on the International Space Station (ISS), known as the Bigelow Expandable Activity Module (BEAM) in May of 2016. The module provides a similar internal volume to that of an Orbital ATK Cygnus cargo vehicle, but with a 77% launch volume savings. As lightweight structures are developed, testing methods are vital to understanding their behavior and validating analytical models. Common techniques can be applied to fabric materials, such as tensile testing, fatigue testing, and shear testing, but common measurement techniques cannot be used on fabric. Measuring strain in a material and during a test is a critical parameter for an engineer to monitor the structure during the test and correlate to an analytical model. The ability to measure strain in fabric structures is a challenge for NASA. Foil strain gauges, for example, are commonplace on metallic structures testing, but are extremely difficult to interface with a fabric substrate. New strain measuring techniques need to be developed for use with fabric structures. This paper investigates options for measuring strain in fabric structures for both ground testing and in-space structural health monitoring. It evaluates current commercially available options and outlines development work underway to build custom measurement solutions for NASA's fabric structures.

Litteken, Douglas A.↗

NASA NTRSDate not supplied

BioSentinel Deep Space CubeSat Mission

The BioSentinel mission was recently launched aboard the SLS launch vehicle (LV) as part of the Artemis-1 campaign. This 6U CubeSat carries yeast cells to analyze the effects of radiation at large distances from Earth, becoming the first biological payload in Deep Space. Prelaunch activities included mission design updates, orbit determination rehearsals and the development of a tracking schedule in coordination with the Artemis-1 payload office and the Deep Space Network (DSN). An important influence on the trajectories of Artemis I secondaries was the uncertainty associated with deployment from the Interim Cryogenic Propulsion System (ICPS), the upper stage of the SLS LV. The ICPS was rotating at a rate of 1 rpm; there was also uncertainty in the spin axis attitude, which translated into an unknown clock angle of deployment. The variability in this angle and magnitude of deployment implied the existence of a non-negligible risk of a lunar impact, which was evaluated for various potential launch dates. On November 16 th 2022 BioSentinel successfully deployed from ICPS and the navigation team started to receive tracking data from the DSN and ESA antennas. Soon after deployment, the spacecraft was tumbling and entered safe mode. The mission team recovered the spacecraft and after four tracking passes, we solved for a first ephemeris that was sent to the DSN for better tracking of the spacecraft. After propagating this first ephemeris solution, we determined that we avoided impact with a margin of a few hundred km from the lunar surface. More tracking data over the next few days allowed for a more refined orbit solution predicting a periselene altitude of 406 km and a lunar eclipse lasting 36.5 minutes. Therefore, BioSentinel operators avoided any correction maneuvers on the trajectory and successfully tracked and guide the spacecraft. The spacecraft performed a nominal lunar flyby which provided the pertinent energy to achieve a final Earth-trailing heliocentric orbit. Over the course of two weeks, the mission operators corroborated that the subsystems were functioning as expected after the lunar eclipse and the large ΔV incurred. Science operations started once the mission achieved the nominal orbit in Deep Space. This paper discusses in detail the BioSentinel flight performance, as well as the challenges and lessons learned prior to and during this CubeSat mission.

Andres Dono Perez↗

NASA NTRS2016

Sylph: Life Detection Probe for a Europa Plume

Jupiter’s Galilean satellite Europa likely contains a vast, global, subsurface salt-water ocean. A singular telescope observation in 2012 indicated possible plume activity, in some ways similar to the continuous plume activity seen at Enceladus. If a Europan plume does expel ocean water into space, its vapor, ice grains, and dust grains could be analyzed by a spacecraft equipped with high-resolution mass spectrometers. Such plume measurements would be sufficient to measure the contextual habitability profile of the ocean, and to detect multiple signatures of life, should it exist in the ocean. Instrumented with MASPEX (Mass Spectrometer for Planetary Exploration) and SUDA (Surface Dust Analyzer), NASA’s planned Europa Mission now in development could theoretically conduct this investigation. However, the mission’s closest flyby altitude would be 25 km; due to Europa’s large gravity, frozen ocean spray containing non-volatile molecular species critical to biosignature detection can be sampled only within 5 km of the surface. The Europa Mission would not fly this low. Sylph is a concept for a complementary, free-flyer smallsat probe, about the same size as an office water-cooler bottle, that could be deployed by the Europa Mission as it conducts a plume fly-through. Sylph would execute a single ~2 km altitude plume pass below the main spacecraft. With a mass of 40 kg and a 24-hr life, the probe would autonomously navigate its low-altitude pass, and carry a dualchannel Mini-SUDA impact ionization mass spectrometer that would measure the composition of large grains, complementing the main spacecraft’s measurements of small grains and gas. Sylph is a novel smallsat concept: purpose-built configuration optimized for both the harsh Jovian environment and for Europan planetary-protection requirements, and built with advanced manufacturing methods from both deep space and smallsat components. For $80M (~4% marginal cost), the Europa Mission could buy a Sylph “insurance policy,” hedging the possibility that it does discover ocean plumes upon arrival in 2028. At less than 85 kg for probe and accommodations, the mission could carry two or three of the probes.

Sherwood, Brent↗

NASA NTRS2004

Earth return maneuver strategies for Genesis and Stardust

As part of NASA's Discovery Program, Genesis and Stardust will be the first missions since the Apollo Program to return samples collected in deep space. To constrain costs of recovery, entry requirements must be much tighter than those imposed on Apollo. Spacecraft designs were also greatly simplified to limit costs, giving rise to a variety of operational limitations and constraints. In light of these considerations, approach to Earth presents a challenge in terms of both mission planning and navigation. This paper discusses strategies for trajectory correction during the Earth return phases of both missions.

Williams, Kenneth E.↗

NASA NTRS1980

Block 1, phase 1 very long baseline interferometry implementation

The Block 1, phase 1 VBLI System, implemented in the Deep Space Network and currently undergoing system testing, is discussed. The system can be characterized as the modification of existing equipment and the addition of new software in the 64 m subnet and the addition of new hardware and software in the Network Operations and Control Center. It is to be operational to support Voyager project navigation requirements and is to provide, on a weekly basis, the information related to station clock synchronization, UT1, and polar motion.

Wilcher, J. H.↗