PIM-1 as a Solution-Processable “Molecular Basket” for CO 2 Capture from Dilute Sources
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Measurements of SO2 emission rates and concentrations and of particle distribution, size, shape, and composition were made in quiescent volcanic plumes emitted into the troposphere from Poas and Arenal volcanos, Costa Rica, and Colima volcano, Mexico. SO2 emission rates were 700 + or - 180 metric tons per day (t/d) for Poas, 210 + or - 30 t/d for Arenal, and 320 + or - 50 t/d for Colima. The concentrations of SO2 calculated from the COSPEC/lidar data were 5-380 ppb. Concentrations of SO2 measured directly by flame photometry were 10-250 ppb. Particles collected in the plumes with a quartz crystal microbalance impactor were mostly less than 3 microns in diameter and consisted of droplets of dilute sulfur-bearing solutions and minor amounts of layer silicate particles coated with a sulfur-bearing film or crust. Total particle concentrations were 4.7 micrograms per cu.m for Poas and 18.8 micrograms per cu.m for Colima. Comparison of concentrations of SO2 in the plumes with gas samples collected at fumaroles on the ground suggests that the plumes are diluted by the atmosphere by factors of up to 100,000.
Mature valencia orange trees were sprayed with hydrochloric acid solutions (pH 7.8, 2.0, 1.0, and 0.5) in the field at the full bloom stage and at one month after fruit set. Potted valencia orange and dwarf citrus trees, four species of plants native to Merritt Island, and four agronomic species were exposed to various pH levels of simulated acid rain under controlled conditions. The acid rain was generated from dilutions of hydrochloric acid solutions or by passing water through an exhaust generated by burning solid rocket fuel. The plants were injured severely at pH levels below 1.0, but showed only slight injury at pH levels of 2.0 and above. Threshold injury levels were between 2.0 and 3.0 pH. The sensitivity of the different plant species to acid solutions was similar. Foliar injury symptoms were representative of acid rain including necrosis of young tissue, isolated necrotic spots or patches, and leaf abscission. Mature valencia orange trees sprayed with concentrations of 1.0 pH and 0.5 pH in the field had reduced fruit yields for two harvests after the treatment. All experimental trees were back to full productivity by the third harvest after treatment.
Pyrazolate-bridged di-nuclear Pt complexes represent a series of molecules with tunable absorption and emission properties that can be directly modulated by structural factors, such as the Pt-Pt distance. However, direct experimental information regarding the structure of the emissive triplet excited state has remained scarce. Using time-resolved wide angle X-ray scattering (WAXS), the molecular structure of the triplet excited state for one of the complexes [Pt(ppy)(μ-tBu 2 pz)] 2 was obtained in a dilute (0.5 mM) toluene solution utilizing the monochromatic X-ray beamline 11IDD of the Advanced Photon Source. The excited state structural analysis was carried out based on the results from both transient WAXS measurements and DFT calculations to shed light on the primary structural changes, in particular the Pt-Pt distance and ligand rotation taking place following the photo-excitation of [Pt(ppy)(μ-tBu 2 pz)] 2 in toluene solution. We find that in the triplet excited state a pronounced contraction along the Pt-Pt axis has taken place accompanied by rotational motions of ppy ligands toward one another. Our results suggest that the contraction is larger than what has previously been reported, but are in good agreement with recent theoretical efforts and suggest the ppy moieties as targets for rational synthesis aimed at tuning the excited-state structure and properties
We present an application of the Scaling Particle Theory (SPT) coupled with an ab initio assessment of the electronic, dispersive, and repulsive energy terms based on the Polarized Continuum Model (PCM) aimed at reproducing the observed solubility behavior of OH{sub 2} over the entire compositional range from pure molten silica to pure water and wide pressure and temperature regimes. It is shown that the solution energy is dominated by cavitation terms, mainly entropic in nature, which cause a large negative solution entropy and a consequent marked increase of gas phase fugacity with increasing temperatures. Besides, the solution enthalpy is negative and dominated by electrostatic terms which depict a pseudopotential well whose minimum occurs at a low water fraction (X{sub H{sub 2O}}) of about 6 mol. %. The fine tuning of the solute-solvent interaction is achieved through very limited adjustments of the electrostatic scaling factor γ{sub el} which, in pure water, is slightly higher than the nominal value (i.e., γ{sub el} = 1.224 against 1.2), it attains its minimum at low H{sub 2}O content (γ{sub el} = 0.9958) and then rises again at infinite dilution (γ{sub el} = 1.0945). The complex solution behavior is interpreted as due to the formation of energetically efficient hydrogen bonding when OH functionals are in appropriate amount and relative positioning with respect to the discrete OH{sub 2} molecules, reinforcing in this way the nominal solute-solvent inductive interaction. The interaction energy derived from the SPT-PCM calculations is then recast in terms of a sub-regular Redlich-Kister expansion of appropriate order whereas the thermodynamic properties of the H{sub 2}O component at its standard state (1-molal solution referred to infinite dilution) are calculated from partial differentiation of the solution energy over the intensive variables.
Hydrothermal liquefaction of wet wastes (e.g., food waste and sewage sludge) offers a promising avenue for producing biocrude, but the resulting product is often contaminated with metals and water, impacting the biocrude upgrading steps to produce final fuel (e.g., jet and diesel). Here this study investigates the use of aqueous solutions of formic acid for desalting biocrudes and improving their quality. The results show that this approach significantly reduces both metal and water content, enabling mild hydrotreatment with reduced hydrogen consumption to further enhance the biocrude's quality. A preliminary technoeconomic analysis based on these experimental results shows that even without optimization, this washing process can yield biocrude with a minimum selling price of $1.87/GGE. Overall, our study demonstrates the potential for using dilute formic acid aqueous solutions to improve the quality of biocrudes, which can lead to more efficient and cost-effective conversion into biofuels.
Using extensive first-principles density functional calculations, we calculate thermodynamic properties of binary fcc cobalt-based alloys with 25 different solute elements. For each solute element X, we calculate its (a) nearest- and next-nearest-neighbor solute–vacancy binding energy, (b) dilute impurity mixing energy with respect to the equilibrium and hypothetical fcc-based reference states of the solute, (c) enthalpy of formation of cobalt-rich binary ordered compounds in the Co–X system, (d) solubility enthalpy, and other derived quantities. Here, we find that the solute–vacancy binding energies of all the studied solutes in fcc cobalt are positive (indicating favorable binding), in contrast to nickel, aluminum, magnesium, and copper-based alloys, where mid 3d transition metal solutes have unfavorable solute–vacancy binding. We study the physical and chemical effects influencing solute–vacancy binding energy, and find that (a) it correlates broadly with solute size—larger solute atoms possess stronger binding with vacancies—and this is understood in terms of strain relief and secondary next-nearest-neighbor interactions, and (b) it follows a parabolic trend as a function of d-occupancy across the transition metal series—falling to a minimum at the middle of the series—and this is understood in terms of a d-band filling effect. We also find this d-band filling effect in other calculated quantities such as the dilute impurity volumes and dilute impurity mixing energies. To aid in building thermodynamic databases, we tabulate all the calculated thermodynamic quantities, and compare them with experimental phase diagrams data and previous literature, and find good agreement where such data is available.
Superfluorescence appears as an intense background in femtosecond time-resolved fluorescence noncollinear optical parametric amplification spectroscopy, which severely interferes the reliable acquisition of the time-resolved fluorescence spectra especially for an optically dilute sample. Superfluorescence originates from the optical amplification of the vacuum quantum noise, which would be inevitably concomitant with the amplified fluorescence photons during the optical parametric amplification process. Here, we report the development of a femtosecond time-resolved fluorescence non-collinear optical parametric amplification spectrometer assisted with a 32-channel lock-in amplifier for efficient rejection of the superfluorescence background. With this spectrometer, the superfluorescence background signal can be significantly reduced to 1/300–1/100 when the seeding fluorescence is modulated. An integrated 32-bundle optical fiber is used as a linear array light receiver connected to 32 photodiodes in one-to-one mode, and the photodiodes are further coupled to a home-built 32-channel synchronous digital lock-in amplifier. As an implementation, time-resolved fluorescence spectra for rhodamine 6G dye in ethanol solution at an optically dilute concentration of 10{sup −5}M excited at 510 nm with an excitation intensity of 70 nJ/pulse have been successfully recorded, and the detection limit at a pump intensity of 60 μJ/pulse was determined as about 13 photons/pulse. Concentration dependent redshift starting at 30 ps after the excitation in time-resolved fluorescence spectra of this dye has also been observed, which can be attributed to the formation of the excimer at a higher concentration, while the blueshift in the earlier time within 10 ps is attributed to the solvation process.
The mechanism(s) of low salinity water flooding (LSWF) must be better understood at high temperatures and pressures if the method is to be applied in high T/P kaolinite-bearing sandstone reservoirs. We measured contact angles between a sandstone and an oil (acid number, AN = 3.98 mg KOH/g, base number, BN = 1.3 mg KOH/g) from a reservoir in the Tarim Field in western China in the presence of various water chemistries. We examined the effect of aqueous ionic solutions (formation brine, 100X diluted formation brine, and softened water), temperature (60, 100 and 140 °C) and pressure (20, 30, 40, and 50 MPa) on the contact angle. We also measured the zeta potential of the oil/water and water/rock interfaces to calculate oil/brine/rock disjoining pressures. A surface complexation model was developed to interpret contact angle measurements and compared with DLVO theory predictions. Contact angles were greatest in formation water, followed by the softened water, and low salinity water at the same pressure and temperature. Contact angles increased slightly with temperature, whereas pressure had little effect. DLVO and surface complexation modelling predicted similar wettability trends and allow reasonably accurate interpretation of core-flood results. Water chemistry has a much larger impact on LSWF than reservoir temperature and pressure. As a result, low salinity water flooding should work in high temperature and high pressure kaolinite-bearing sandstone reservoirs.
Mesoporous-titania (TiO{sub 2}) photocatalysts have been synthesized using polyethylene glycol (PEG) as a template in dilute acetic acid aqueous solution by hydrothermal process. The effect of PEG molecular weights and thermal treatment on the resultant structure and photocatalytic activity are investigated. Structural and phase compositional properties of the resultant photocatalysts are characterized by transmission electron microscopy, X-ray diffraction and nitrogen sorption analysis. When the molecular weights of PEG vary from 600 to 20,000, the particle sizes of mesoporous structure decrease from 15.1 to 13.3 nm and mean pore sizes increase from 6.9 to 10.6 nm. The chemical reactions of the formation of mesoporous-TiO{sub 2} during its synthesis have been proposed and discussed. The activities of mesoporous-TiO{sub 2} photocatalysts are evaluated and compared with Degussa P-25 using chloro-phenol as a testing compound. The reaction mechanism of photodegradation is also described on the basis of high performance liquid chromatography.
This paper presents new measurements of species concentrations, temperature and mixture fraction in selected regions of a turbulent ethanol spray flame. The line-Raman–LIF–COsingle bondOH setup developed at the Sandia's Combustion Research Facility is utilised to probe regions of a spray flame where laser breakdown of liquid droplets is avoided and the remaining interferences can be corrected. The spray flame is stabilised on the piloted Sydney needle spray burner, where axial translation of the liquid injecting needle in the air-blast stream can transition the spray from dilute to dense. The solution to obtaining successful measurements is found to be multifaceted and includes: the appropriate selection of flame conditions; high sensitivity of the Raman detection system permitting reduced laser energies; development of a pre-processing algorithm to reject strong droplet interferences; and application of the hybrid matrix inversion method combined with wavelet denoising to account for interference corrections and noise at the very low signal levels obtained. Unique and necessary for the successful measurements reported in this paper, a pre-processing algorithm is outlined that removes data points corrupted with strong interferences from droplets. These interferences arise from a range of sources, but the most intense are due to the laser interaction with surrounding mist or liquid fragments, such that measurements near the jet centreline are corrupted and hence discarded. Reliable measurements of mixture fraction, temperature obtained from the sum of the species number densities, and species mole fractions are reported for regions in the flames sufficiently far from the centreline. The paper demonstrates the feasibility of the judicious use of Raman scattering in turbulent spray flames, the results of which will be extremely useful for validating numerical simulations.
The electrochemical instability of ether-based electrolyte solutions hinders their practical applications in high-voltage Li metal batteries. To circumvent this issue, here, we propose a dilution strategy to lose the Li + /solvent interaction and use the dilute non-aqueous electrolyte solution in high-voltage lithium metal batteries. We demonstrate that in a non-polar dipropyl ether (DPE)-based electrolyte solution with lithium bis(fluorosulfonyl) imide salt, the decomposition order of solvated species can be adjusted to promote the Li + /salt-derived anion clusters decomposition over free ether solvent molecules. This selective mechanism favors the formation of a robust cathode electrolyte interphase (CEI) and a solvent-deficient electric double-layer structure at the positive electrode interface. When the DPE-based electrolyte is tested in combination with a Li metal negative electrode (50 μm thick) and a LiNi 0.8 Co 0.1 Mn 0.1 O 2 -based positive electrode (3.3 mAh/cm 2 ) in pouch cell configuration at 25 °C, a specific discharge capacity retention of about 74% after 150 cycles (0.33 and 1 mA/cm 2 charge and discharge, respectively) is obtained.
We report the structure of the electrical double layer (EDL) formed near graphene in aqueous environments strongly impacts its performance for a plethora of applications, including capacitive deionization. In particular, adsorption and organization of multivalent counterions near the graphene interface can promote nonclassical behaviors of EDL including overcharging followed by co-ion adsorption. In this paper, we characterize the EDL formed near an electrified graphene interface in dilute aqueous YCl 3 solution using in situ high resolution x-ray reflectivity (also known as crystal truncation rod) and resonant anomalous x-ray reflectivity (RAXR). These interface-specific techniques reveal the electron density profiles with molecular-scale resolution. We find that yttrium ions (Y 3+ ) readily adsorb to the negatively charged graphene surface to form an extended ion profile. This ion distribution resembles a classical diffuse layer but with a significantly high ion coverage, i.e., 1 Y 3+ per 11.4 ± 1.6 Å 2 , compared to the value calculated from the capacitance measured by cyclic voltammetry (1 Y 3+ per ~240 Å 2 ). Such overcharging can be explained by co-adsorption of chloride that effectively screens the excess positive charge. The adsorbed Y 3+ profile also shows a molecular-scale gap (≥ 5 Å) from the top graphene surfaces, which is attributed to the presence of intervening water molecules between the adsorbents and adsorbates as well as the lack of inner-sphere surface complexation on chemically inert graphene. We also demonstrate controlled adsorption by varying the applied potential and reveal consistent Y 3+ ion position with respect to the surface and increasing cation coverage with increasing the magnitude of the negative potential. This is the first experimental description of a model graphene-aqueous system with controlled potential and provides important insights into the application of graphene-based systems for enhanced and selective ion separations.
Thirteen female Rhesus macaques were intramuscularly injected with 90 Sr(NO 3 ) 2 diluted in sodium citrate solution. The biokinetic data from these animals were compared against the predictions of the NCRP 156 wound models combined with the ICRP systemic models. We observed observed that the activities measured in plasma of these nonhuman primates (NHPs) were consistently lower than those predicted by the default human biokinetic models. The urinary excretion from the NHPs at times immediately after injection was much greater than that in humans. The fecal excretion rates were found to be in relatively better agreement with humans. Similarly, the activities retained in the skeleton of the NHPs were lower than that in humans. These differences were attributed to the higher calcium diet of the NHPs (0.03 to 0.12 g/d/kg body weight) compared to that of humans. These observations were consistent with the early animal and human studies that showed the effect of calcium on strontium metabolism, specifically urinary excretion. Strontium is preferentially filtered at a much higher rate in kidneys than calcium because it is less completely bound to protein than is calcium. Furthermore, these differences, along with large inter-animal variability, should be considered when estimating the behavior of Sr in humans from the metabolic data in animals or vice-versa.
In this work, we present the growth and basic magnetic and transport properties of Cr 1+x Pt 5-x P. We show that single crystals can readily be grown from a high-temperature solution created by adding dilute quantities of Cr to Pt-P based melts. Like other 1-5-1 compounds, Cr 1+x Pt 5-x P adopts a tetragonal P4/mmm, structure composed facesharing CrPts like slabs that are broken up along the c-axis by sheets of P atoms. EDS and X-ray diffraction measurements both suggest Cr 1+x Pt 5-x P has mixed occupancy between Cr and Pt atoms, similar to what is found in the closely related compound CrPtg, giving real compositions of Cr 1.5 Pt 4.5 P (x = 0.5). We report that Cr 1.5 Pt 4.5 P orders ferromagnetically at T c = 464.5 K with a saturated moment of ≈ 2.1 μs/Cr at 1.8 K. Likely owing to the strong spin-orbit coupling associated with the large quantity of high Z, Pt atoms, Cr 1.5 Pt 4.5 P has exceptionally strong planar anisotropy with estimated anisotropy fields of 345 kOe and 220 kOe at 1.8 K and 300 K respectively. The resistance of Cr 1.5 Pt 4.5 P has a metallic temperature dependence with relatively weak magnetoresistance. Electronic band structure calculations show that CrPt 5 P has a large peak in the density of states near the Fermi level which is split into spin majority and minority bands in the ferromagnetic state. Furthermore, the calculations suggest substantial hybridization between Cr-3d and Pt-5d states near the Fermi level, in agreement with the experimentally measured anisotropy.
EXAFS studies on dilute samples are usually carried out by collecting the fluorescence yield using a large-area multi-element detector. This method is susceptible to the `glitches' produced by all single-crystal monochromators. Glitches are sharp dips or spikes in the diffracted intensity at specific crystal orientations. If incorrectly compensated, they degrade the spectroscopic data. Normalization of the fluorescence signal by the incident flux alone is sometimes insufficient to compensate for the glitches. Measurements performed at the state-of-the-art wiggler beamline I20-scanning at Diamond Light Source have shown that the glitches alter the spatial distribution of the sample's quasi-elastic X-ray scattering. Because glitches result from additional Bragg reflections, multiple-beam dynamical diffraction theory is necessary to understand their effects. Here, the glitches of the Si(111) four-bounce monochromator of I20-scanning just above the Ni K edge are associated with their Bragg reflections. A fitting procedure that treats coherent and Compton scattering is developed and applied to a sample of an extremely dilute (100 micromolal) aqueous solution of Ni(NO 3 ) 2 . The depolarization of the wiggler X-ray beam out of the electron orbit is modeled. The fits achieve good agreement with the sample's quasi-elastic scattering with just a few parameters. The X-ray polarization is rotated up to ±4.3° within the glitches, as predicted by dynamical diffraction. These results will help users normalize EXAFS data at glitches.
A Zn(II) complex with N,N'-bis(5-bromosalicylidene)ethylenediamine exhibiting intense visible blue luminescence is synthesized. It is found that the zinc complex fluoresces at 293 K in both polycrystalline form and in solutions (λ{sub max} = 440 and 450 nm, respectively); the relative fluorescence quantum yields of the complex are determined in dilute ethanol, dimethylformamide, and dimethylsulfoxide solutions.
An experimental study was undertaken to investigate the corrosivity to carbon steel of the liquid-air interface of dilute simulated radioactive waste solutions. Open-circuit potentials were measured on ASTM A537 carbon steel specimens located slightly above, at, and below the liquid-air interface of simulated waste solutions. The 0.12-inch-diameter specimens used in the study were sized to respond to the assumed distinctive chemical environment of the liquid-air interface, where localized corrosion in poorly inhibited solutions may frequently be observed. The practical inhibition of such localized corrosion in liquid radioactive waste storage tanks is based on empirical testing and a model of a liquid-air interface environment that is made more corrosive than the underlying bulk liquid due to chemical changes brought about by absorbed atmospheric carbon dioxide. The chemical changes were assumed to create a more corrosive open-circuit potential in carbon in contact with the liquid-air interface. Arrays of 4 small specimens spaced about 0.3 in. apart were partially immersed so that one specimen contacted the top of the meniscus of the test solution. Two specimens contacted the bulk liquid below the meniscus and one specimen was positioned in the vapor space above the meniscus. Measurements were carried out for up to 16 hours to ensure steady-state had been obtained. The results showed that there was no significant difference in open-circuit potentials between the meniscus-contact specimens and the bulk-liquid-contact specimens. With the measurement technique employed, no difference was detected between the electrochemical conditions of the meniscus versus the bulk liquid. Stable open-circuit potentials were measured on the specimen located in the vapor space above the meniscus, showing that there existed an electrochemical connection through a thin film of solution extending up from the meniscus. This observation supports the Hobbs-Wallace model of the development of the pitting susceptibility of carbon steel in alkaline solutions.