Search NASA⌕ Search

SEARCH · Search NASA

Results for “Disentangle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Synchrotron-based coherent scatter x-ray projection imaging using an array of monoenergetic pencil beams

Traditional projection x-ray imaging utilizes only the information from the primary photons. Low-angle coherent scatter images can be acquired simultaneous to the primary images and provide additional information. In medical applications scatter imaging can improve x-ray contrast or reduce dose using information that is currently discarded in radiological images to augment the transmitted radiation information. Other applications include non-destructive testing and security. A system at the Canadian Light Source synchrotron was configured which utilizes multiple pencil beams (up to five) to create both primary and coherent scatter projection images, simultaneously. The sample was scanned through the beams using an automated step-and-shoot setup. Pixels were acquired in a hexagonal lattice to maximize packing efficiency. The typical pitch was between 1.0 and 1.6 mm. A Maximum Likelihood-Expectation Maximization-based iterative method was used to disentangle the overlapping information from the flat panel digital x-ray detector. The pixel value of the coherent scatter image was generated by integrating the radial profile (scatter intensity versus scattering angle) over an angular range. Different angular ranges maximize the contrast between different materials of interest. A five-beam primary and scatter image set (which had a pixel beam time of 990 ms and total scan time of 56 min) of a porcine phantom is included. For comparison a single-beam coherent scatter image of the same phantom is included. The muscle-fat contrast was 0.10 {+-} 0.01 and 1.16 {+-} 0.03 for the five-beam primary and scatter images, respectively. The air kerma was measured free in air using aluminum oxide optically stimulated luminescent dosimeters. The total area-averaged air kerma for the scan was measured to be 7.2 {+-} 0.4 cGy although due to difficulties in small-beam dosimetry this number could be inaccurate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electric dipole moments of light nuclei from {chi}EFT

I present recent calculations of EDMs of light nuclei using chiral effective field theory techniques. At leading-order, we argue that they can be expressed in terms of six CP-violating low-energy constants. With our expressions, eventual non-zero measurements of EDMs of deuteron, helion, and triton can be combined to disentangle the different sources of CP-violation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dilepton resonances in pp (pp) collisions

We analyze dilepton production by considering the contribution of a new neutral gauge boson that are predicted in some extensions of the standard model or alternative models. There are two motivations: the Large Hadron Collider (LHC) is working at an energy regime not yet reached before and the possibility to establish limits for new physics manifest at high energies. The processes analyzed involve dileptons production: p+p{yields}e{sup +}+e{sup -}+X or p+p{yields}{mu}{sup +}+{mu}{sup -}+X, where the new gauge boson Z Prime has a large contribution. We used a Z Prime mass range to obtain lepton distributions that characterize the new contribution and finally we obtain preliminarily discovery potential for a new neutral gauge boson predicted in two versions of the 331 model, showing the possibility to disentangle such versions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Analytical representation for pp elastic scattering at 7 TeV

A precise analysis is performed of the recent pp elastic data at 7 TeV in terms of its real and imaginary amplitudes, that are fully disentangled, consistently with dispersion relations for amplitudes and for slopes. Real and imaginary slopes B{sub R} and B{sub I}, treated as independent quantities, influence the whole t-range and the determination of the total cross section {sigma}. The treatment includes extension to the universal perturbative tail at large |t|. Consistency is obtained in the values of {sigma}, ratio {rho}, B{sub R} and B{sub I} determined in forward and full-t approaches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dielectronic recombination studies based on EBIT

Dielectronic recombination (DR) process plays an important role in high temperature plasmas, where DR can affect charge balance and level populations significantly, and can cause radiative energy loss. Resolvable DR sourced satellite lines are often used for plasma temperature diagnostics, while the un-resolvable ones disturb determining spectral line shape, line intensity, and line position. Data of DR resonant strength is vital for accurate modeling of high temperature plasmas. DR studies are also important for testing atomic structure and atomic collision theories, since they carry information on quantum electrodynamics, relativistic effects, electron correlations and so on. Electron beam ion trap (EBIT) is an accelerator type device, which is capable of acting as both ion sources and light sources. EBIT can produce a special sort of plasma, in which electron energy is tunable and has a very narrow distribution. This made it possible for disentanglement studies on electron ion collision processes in plasmas. In this paper, experimental studies of DR processes based on electron beam ion traps (EBIT) will be discussed.

43 PARTICLE ACCELERATORS↗

Electron scattering mechanisms in fluorine-doped SnO{sub 2} thin films

Polycrystalline fluorine-doped SnO{sub 2} (FTO) thin films have been grown by ultrasonic spray pyrolysis on glass substrate. By varying growth conditions, several FTO specimens have been deposited and the study of their structural, electrical, and optical properties has been carried out. By systematically investigating the mobility as a function of carrier density, grain size, and crystallite size, the contribution of each physical mechanism involved in the electron scattering has been derived. A thorough comparison of experimental data and calculations allows to disentangle these different mechanisms and to deduce their relative importance. In particular, the roles of extended structural defects such as grain or twin boundaries as revealed by electron microscopy or x-ray diffraction along with ionized impurities are discussed. As a consequence, based on the quantitative analysis presented here, an experimental methodology leading to the improvement of the electro-optical properties of FTO thin films is reported. FTO thin films assuming an electrical resistivity as low as 3.7 · 10{sup −4} Ω cm (square sheet resistance of 8 Ω/◻) while retaining good transmittance up to 86% (including substrate effect) in the visible range have been obtained.

36 MATERIALS SCIENCE↗

Current heating induced spin Seebeck effect

A measurement technique for the spin Seebeck effect is presented, wherein the normal metal layer used for its detection is exploited simultaneously as a resistive heater and thermometer. We show how the various contributions to the measured total signal can be disentangled, allowing to extract the voltage signal solely caused by the spin Seebeck effect. To this end, we performed measurements as a function of the external magnetic field strength and its orientation. We find that the effect scales linearly with the induced rise in temperature, as expected for the spin Seebeck effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of transient atomic structure of laser-excited materials from time-resolved diffraction data

The time evolution of the Bragg peaks of photo-excited gold nanofilms is measured using transmission ultrafast electron diffraction (UED) with 3.0 MeV electron pulses and the corresponding structure evolution is calculated using two-temperature molecular dynamics (2T-MD). The good agreement obtained between the measured and calculated Bragg peaks, over the full experimental timescale, enables the lattice temperature effects and the structural changes to be disentangled for the first time. The agreement demonstrates that 2T-MD is a reliable method for solving the inverse problem of structure determination of laser irradiated metals in UED measurements.

36 MATERIALS SCIENCE↗

Two-photon spectroscopy of excitons with entangled photons

The utility of quantum light as a spectroscopic tool is demonstrated for frequency-dispersed pump-probe, integrated pump-probe, and two-photon fluorescence signals which show Ramsey fringes. Simulations of the frequency-dispersed transmission of a broadband pulse of entangled photons interacting with a three-level model of matter reveal how the non-classical time-bandwidth properties of entangled photons can be used to disentangle congested spectra, and reveal otherwise unresolved features. Quantum light effects are most pronounced at weak intensities when entangled photon pairs are well separated, and are gradually diminished at higher intensities when different photon pairs overlap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient spin transfer torque in La{sub 2/3}Sr{sub 1/3}MnO{sub 3} nanostructures

We carry out low temperature magnetotransport measurements on nanostructured La{sub 2/3}Sr{sub 1/3}MnO{sub 3} wires to study the interaction between spin-polarized current and magnetization in this half metallic material. We selectively position domain walls by applying external fields. The domain wall resistance is found to be positive, in contrast to conventional 3d metals. The depinning field is reduced when current pulses are injected into the wire. By comparing measurements for both current polarities, we can disentangle heating and spin transfer torque effects. The determined spin transfer torque efficiency is of the order of 4 × 10{sup −14} Tm{sup 2}/A, which is significantly higher than in permalloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sensitivity studies for the main r process: nuclear masses

The site of the rapid neutron capture process (r process) is one of the open challenges in all of physics today. The r process is thought to be responsible for the creation of more than half of all elements beyond iron. The scientific challenges to understanding the origin of the heavy elements beyond iron lie in both the uncertainties associated with astrophysical conditions that are needed to allow an r process to occur and a vast lack of knowledge about the properties of nuclei far from stability. One way is to disentangle the nuclear and astrophysical components of the question. On the nuclear physics side, there is great global competition to access and measure the most exotic nuclei that existing facilities can reach, while simultaneously building new, more powerful accelerators to make even more exotic nuclei. On the astrophysics side, various astrophysical scenarios for the production of the heaviest elements have been proposed but open questions remain. This paper reports on a sensitivity study of the r process to determine the most crucial nuclear masses to measure using an r-process simulation code, several mass models (FRDM, Duflo-Zuker, and HFB-21), and three potential astrophysical scenarios.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact of surface and residual stresses and electro-/magnetostatic axial loading on the suspended nanomechanical based mass sensors: A theoretical study

Suspended nanomechanical mass sensors are capable to detect the attached molecules or particles through the shifts in the resonant frequencies. However, surface and residual stresses can as well cause a shift of the sensor resonances. As result, understanding the impact of stresses in an accuracy and sensitivity of the mass sensors is a fundamental requirement for a rigorous analysis of experimental data. Here, we present a detailed theoretical study of the suspended nanomechanical resonators and mass sensors under axial load created by surface (residual) stresses or electrostatic (magnetostatic) forces. Easily accessible formulas allowing one either to accurately predict the resonant frequencies of the beam under tension/compression or to disentangle the effects of stresses (axial forces) and the molecule mass on the frequency shift of the suspended mass sensors have been derived. A dimensionless parameter enabling us a simple characterization of the device vibrational regime (i.e., beam, string, or beam-to-string transition) has been identified. Based on the results, the applicability limits of the classical beam theory with and without axial loading have been found. We also show that tuning the beam resonant frequencies enhances the mass sensitivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding chemical reactions of CO{sub 2} and its isoelectronic molecules with 1-butyl-3-methylimidazolium acetate by changing the nature of the cation: The case of CS{sub 2} in 1-butyl-1-methylpyrrolidinium acetate studied by NMR spectroscopy and density functional theory calculations

NMR spectroscopy ({sup 1}H, {sup 13}C, {sup 15}N) shows that carbon disulfide reacts spontaneously with 1-butyl-1-methylpyrrolidinium acetate ([BmPyrro][Ac]) in the liquid phase. It is found that the acetate anions play an important role in conditioning chemical reactions with CS{sub 2} leading, via coupled complex reactions, to the degradation of this molecule to form thioacetate anion (CH{sub 3}COS{sup −}), CO{sub 2}, OCS, and trithiocarbonate (CS{sub 3}{sup 2−}). In marked contrast, the cation does not lead to the formation of any adducts allowing to conclude that, at most, its role consists in assisting indirectly these reactions. The choice of the [BmPyrro]{sup +} cation in the present study allows disentangling the role of the anion and the cation in the reactions. As a consequence, the ensemble of results already reported on CS{sub 2}-[Bmim][Ac] (1), OCS-[Bmim][Ac] (2), and CO{sub 2}-[Bmim][Ac] (3) systems can be consistently rationalized. It is argued that in system (1) both anion and cation play a role. The CS{sub 2} reacts with the acetate anion leading to the formation of CH{sub 3}COS{sup −}, CO{sub 2}, and OCS. After these reactions have proceeded the nascent CO{sub 2} and OCS interact with the cation to form imidazolium-carboxylate ([Bmim] CO{sub 2}) and imidazolium-thiocarboxylate ([Bmim] COS). The same scenario also applies to system (2). In contrast, in the CO{sub 2}-[Bmim] [Ac] system a concerted cooperative process between the cation, the anion, and the CO{sub 2} molecule takes place. A carbene issued from the cation reacts to form the [Bmim] CO{sub 2}, whereas the proton released by the ring interacts with the anion to produce acetic acid. In all these systems, the formation of adduct resulting from the reaction between the solute molecule and the carbene species originating from the cation is expected. However, this species was only observed in systems (2) and (3). The absence of such an adduct in system (1) has been theoretically investigated using DFT calculations. The values of the energetic barrier of the reactions show that the formation of [Bmim] CS{sub 2} is unfavoured and that the anion offers a competitive reactive channel via an oxygen-sulphur exchange mechanism with the solute in systems (1) and (2)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Potential-well depth at amorphous-LaAlO{sub 3}/crystalline-SrTiO{sub 3} interfaces measured by optical second harmonic generation

By a combination of optical second harmonic generation and transport measurements, we have investigated interfaces formed by either crystalline or amorphous thin films of LaAlO{sub 3} grown on TiO{sub 2}-terminated SrTiO{sub 3}(001) substrates. Our approach aims at disentangling the relative role of intrinsic and extrinsic doping mechanisms in the formation of the two-dimensional electron gas. The different nature of the two mechanisms is revealed when comparing the sample response variation as a function of temperature during annealing in air. However, before the thermal treatment, the two types of interfaces show almost the same intensity of the second harmonic signal, provided the overlayer thickness is the same. As we will show, the second harmonic signal is proportional to the depth of the potential well confining the charges at the interface. Therefore, our result demonstrates that this depth is about the same for the two different material systems. This conclusion supports the idea that the electronic properties of the two-dimensional electron gas are almost independent of the doping mechanism of the quantum well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron correlation in solids via density embedding theory

Density matrix embedding theory [G. Knizia and G. K.-L. Chan, Phys. Rev. Lett. 109, 186404 (2012)] and density embedding theory [I. W. Bulik, G. E. Scuseria, and J. Dukelsky, Phys. Rev. B 89, 035140 (2014)] have recently been introduced for model lattice Hamiltonians and molecular systems. In the present work, the formalism is extended to the ab initio description of infinite systems. An appropriate definition of the impurity Hamiltonian for such systems is presented and demonstrated in cases of 1, 2, and 3 dimensions, using coupled cluster theory as the impurity solver. Additionally, we discuss the challenges related to disentanglement of fragment and bath states. The current approach yields results comparable to coupled cluster calculations of infinite systems even when using a single unit cell as the fragment. The theory is formulated in the basis of Wannier functions but it does not require separate localization of unoccupied bands. The embedding scheme presented here is a promising way of employing highly accurate electronic structure methods for extended systems at a fraction of their original computational cost.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale three-dimensional reconstruction of elastic and inelastic mean free path lengths by electron holographic tomography

Electron holography at medium resolution simultaneously probes projected electrostatic and magnetostatic potentials as well as elastic and inelastic attenuation coefficients with a spatial resolution of a few nanometers. In this work, we derive how the elastic and inelastic attenuation can be disentangled. Using that result, we perform the first three dimensional tomographic reconstruction of potential and (in)elastic attenuation in parallel. The technique can be applied to distinguish between functional potentials and composition changes in nanostructures, as demonstrated using the example of a GaAs—Al{sub 0.33}Ga{sub 0.67}As core-shell nanowire.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solid-state diffusion in amorphous zirconolite

We discuss how structural disorder and amorphization affect solid-state diffusion, and consider zirconolite as a currently important case study. By performing extensive molecular dynamics simulations, we disentangle the effects of amorphization and density, and show that a profound increase of solid-state diffusion takes place as a result of amorphization. Importantly, this can take place at the same density as in the crystal, representing an interesting general insight regarding solid-state diffusion. We find that decreasing the density in the amorphous system increases pre-factors of diffusion constants, but does not change the activation energy in the density range considered. We also find that atomic species in zirconolite are affected differently by amorphization and density change. Our microscopic insights are relevant for understanding how solid-state diffusion changes due to disorder and for building predictive models of operation of materials to be used to encapsulate nuclear waste.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Polarization-dependent exciton dynamics in tetracene single crystals

We conduct polarization-dependent ultrafast spectroscopy to study the dynamics of singlet fission (SF) in tetracene single crystals. The spectrotemporal species for singlet and triplet excitons in transient absorption spectra are found to be strongly dependent on probe polarization. By carefully analyzing the polarization dependence, the signals contributed by different transitions related to singlet excitons have been disentangled, which is further applied to construct the correlation between dynamics of singlet and triplet excitons. The anisotropy of exciton dynamics provides an alternative approach to tackle the long-standing challenge in understanding the mechanism of singlet fission in organic semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗